How to make an account assignment for stock in transit inside obyc

hi experts,
i am sure i dont know as to what transaction type shoudl i use to allow postings to stock in transit account. please help me with step by step processes involved in it.
best regards
sayeed

It is not possible to define default Acct Assgmt cat for particular plants in STO. Instead you can make it default at client level (irrespective of doc type) for particular users.
For doing so you need to just maintain user parameter KNT with value equal to your Acct Assigmt cat. You can maintain user parameter in SU01/SU3. This means whenever this particular user run the transaction which includes act. assigmt cat will have default act assigmt cat.
Hope it might help you somewhat.
Cheers,
Parag Mahajan

Similar Messages

  • How to make default account assignment category in planned order?

    Scneario Description:
    1. Sales order for a configurable parent item is created in ERP & order BOM is changed & transferred to APO. In APO MRP run takes place for that parent item, which creates a planned order with account assignment category "M" (M:Individual Customer w/o KD-CO.
    2. Now based on the dependant requirement generated for parent item, MRP takes place for one of the child item in ERP & purchase requisition gets created for child item.
    Question:
    1. Can anybody help me how i can make default account assignment as "F" (F:Order) in the planned order of parent item?
    2. PR created for child item also has default account assignment category as "M". we wish to change that to "F".
    Thanks & best regards
    Hemchandra & Sandeep Mandhana

    Hi V. Suresh,
    The account assignment category maintained in the requirement class for parent item is 'M'.
    No account assignment category maintained has been maintained in the requirement class Semi-finished component (this component is sent for subcontracting).
    The business process is as follows:
    1. Create Sales Order for Parent say ME_PARENT.
    2. Order BOM for ME_PARENT is created and subsequently cifed to APO.
    3. PP/DS heuristic is run for ME_PARENT.
    4. MRP for component ME_COMP is run in ERP.
    It can be seen that purchase requistion for ME_COMP has a/c assgn category as 'M'. It seems that the ME_COMP has inherited 'M' from ME_PARENT.
    We would like to have no a/c assgn category for ME_COMP.
    Any pointers?
    Regards,
    Sandeep

  • How to enter an account assignment category for a material.

    Hi guys:
       I am facing following error prompt,please tell me how to enter an account assignment category for a material.
    thanks
    Account assignment mandatory for material 0000000N6451 (enter acc. ***. cat.)
    Message no. ME062
    Diagnosis
    There is no provision for value-based inventory management for this material type in this plant. Account assignment is thus necessary.
    Procedure
    Please enter an account assignment category.

    HI Shyam :
    Go to transaction type OMS2. Check whether the material type u are using is ticked for Value update.
    If not,
    a. Use a different material type
    b. or Use an account assignment category.
    How to use B,that is hot to enter an account assignment cateogory

  • How to make itunes account for free

    how to make itunes account for free?

    Since you're posting here, you already have an Apple ID. Click here and follow the rest of the instructions.
    (93518)

  • Account Assignment but Stock Qty to be updated

    Hi
    in our Business Process, we creating PR from Plant Maintenance Order - Account Assignment : F. and create Account Assignment PO (F) with ref to that PR. and GR is valuated. so at the time of GR, Qty & Value hits the Account Assignment Object (F) - PM Order.
    But in Actual Business Process, when we made the Goods receipt not all the Material will be Issued - some Qty being kept in Store only. but in SAP Standard when GR Made both qty & value consumes in PM Order. How to achieve Qty to get posted to Stock & Value only to be posted to Consumption - PM Order. so that when ever required thru Reservation only Qty to be issued. and Value Not Required at the time of Goods Issue. so that Complete Stock will be tracked in System.
    it is for All Materials (in the Material Type QTY & Value Update is enabled). around 70,000 + Materials are used.
    what are the settings to be done in Account Assignment / Special Stock / MVT. for Goods receipt we are Using MVT 103 & 105.
    Very much appreciate for ur help.
    Thanks
    Raja

    Hi,
    The only way I know to have value of GR booked against cost object and qty still visible in stock as only Qty is to use Project Non-valuated stock. (unless you can play with material type value / qty update).
    So in your case you can change from F Internal Order to Q WBS Project Stock and your controlling might create some settlement rules from WBS to Internal Order so that cost will end up in the right place.
    Non-valuated unrestricted Project stock is visible in transactions like MMBE, on project level  - it can be issued to project in full or in partial qty and then it disappears not giving any posting in the system.
    Best Regards,
    Tomek

  • Account assignment for Movt type 101 and 501

    All SAP Gurus,
    We want to do the account assignment for movt types 101, 102, 122, 123, 201, 202, 261, 262 accourding to the movement types.
    We are aware that the Transaction Key is 'GBB'.
    But how to know that which 'General Modification' is used for which movement types.
    (in short where we can find this link between movement types and Transaction Key and 'General Modification')
    Regards,

    To know this first you have to know what does the different general modifications means for GBB:
    AUA: for order settlement
    AUF: for goods receipts for orders (without account assignment)
    and for order settlement if AUA is not maintained
    AUI: Subsequent adjustment of actual price from cost center directly
    to material (with account assignment)
    BSA: for initial entry of stock balances
    INV: for expenditure/income from inventory differences
    VAX: for goods issues for sales orders without
    account assignment object (the account is not a cost element)
    VAY: for goods issues for sales orders with
    account assignment object (account is a cost element)
    VBO: for consumption from stock of material provided to vendor
    VBR: for internal goods issues (for example, for cost center)
    VKA: for sales order account assignment
    (for example, for individual purchase order)
    VKP: for project account assignment (for example, for individual PO)
    VNG: for scrapping/destruction
    VQP: for sample withdrawals without account assignment
    VQY: for sample withdrawals with account assignment
    ZOB: for goods receipts without purchase orders (mvt type 501)
    ZOF: for goods receipts without production orders
    (mvt types 521 and 531)
    You can also define your own account groupings. If you intend to post goods issues for cost centers (mvt type 201) and goods issues for orders (mvt type 261) to separate consumption accounts, you can assign the account grouping ZZZ to movement type 201 and account grouping YYY to movement type 261
    Then go and check OMWN.
    Regards,
    Indranil

  • Multiple account assignement for PO

    Hi!
    i've this problem about purchase data: to extract these data i'm using 2lis_02_itm and 2lis_02_Scl DS.
    but i need in the same query the account assignement for PO (these data are in EKKN table).
    in a first time i've enhanced the DS, but with Multiple account assignement i don't have correct data (because i've used select single in CMOD).
    now i don't know how to enhance the DS with Multiple account assignement, could you help me ?
    (a solution is doing an ODS with EKKN data and make an infoset with an other ODS with data from LIS extractor, but i prefer to enhance the DS)

    Hi Alex
    You are not able to enhance 2lis_02* datasources to give you the information wanted. The problem is that you need to split one line into multiple lines. I'm as well not sure that you'll get a good result from an infoset as you’ll get performance problems due to the needed join on document , line level and a possible outer join (not all documents will show up in EKKN). A better solution will be to source EKKN to a separate ODS, source 2lis_02* into separate ODS’s and then create a new ODS sourcing data from the 2lis_02* ODS where you read the EKKN ODS in the start routine and uses that info to create extra rows if needed.
    With Kind Regards
    Kristian

  • Mandatory default account assignment for HIBE material

    Hi,
    For stock transfer PO we need account assignment Mandatory with default value "K" while creating the stock transfer PO.
    How we can do this?
    With Best Regards,
    Rajkumar

    Thanks for the reply.
    We want the same functionality as described by you.
    The requirement is that, when the stock transfer PO will be created the account assignment for line item of HIBE type (only) should be displayed as "K" i.e. Acct. assig. is mandatory and default equal to "K". With this restriction the user creating the Stock transfer PO for HIBE material will be prompted to enter cost center and GL account. And when goods receipt will be made for the PO,  the HIBE material will get consumed for cost center.
    So, can we made such restrictions while creating stock transfer PO?
    With Best Regards,
    Rajkumar N. Phand

  • How to configure Automatic Account Clearing for A/R

    Hi,
    Kindly advice me how to configure  Automatic Account Clearing for A/R
    The client requirement is
    In A/R the customer accounts are not automatically clearing when a payment is posted for that account. We are still seeing all open items and all paid or cleared items when we go to FBL5N and select open items for viewing. Please make account clearing automatic for customer payments.
    Thanks in advance
    Sunitha

    Hi,
    Use T code OB74.
    Maintain for your Chart Of Account, acct type "D", From and to customer accounts and then add the critera you want. Pls note you cannot define more than 5 criteria.
    Then schedule the clearing program job F.13 in the background.
    Cheers.

  • How to default an account assignment in a STO?

    Hello,
    We have a customised account assignment type "Z"
    We would like this type to be defaulted in STO's for some receiving Plants only.
    Do you know if this is feasible to force the system to trigger this account assignement for a defined list of plants?
    Thanks a lot in advance

    It is not possible to define default Acct Assgmt cat for particular plants in STO. Instead you can make it default at client level (irrespective of doc type) for particular users.
    For doing so you need to just maintain user parameter KNT with value equal to your Acct Assigmt cat. You can maintain user parameter in SU01/SU3. This means whenever this particular user run the transaction which includes act. assigmt cat will have default act assigmt cat.
    Hope it might help you somewhat.
    Cheers,
    Parag Mahajan

  • How to activate FM Account assignment in Sales Order

    Dear All,
    How to activate FM Account assignment in Sales Order at item level in account assignment category.
    Plz provide some solution for the same.
    Thanks & Regards,
    Pankaj

    Hi,
    Thanks for your reply.
    I am not asking of account assignment group for material.
    My problem is when i am creating Sales Order at item level in Account assignment category there is one field for Fund Mangement account assignment grp.
    I want to activate this field and i have to enter FM area in that field.
    Plz send some solution for the same.
    Thanks & regards,
    Pankaj

  • Account assignment for Movement type 561

    Dear Professionals
    Hi,
    I am new to SD.
    Pls give me ur advice.
    In my environment,
    MB1C:"Enter Other goods Receipt"
    -> Journal: "dr.Inventory/cr.COGS"
    (Movement type: 561)
    VL01N:"Outbound Delivery Create"
    -> Journal: "dr.Inventory/cr.COGS"
    (Movement type:601)
    I guess that the journal for MB1C is incorrect.
    I configured BSX and GBB on OBYC,
    but I have no idea how to change the account assignment per Movement type.
    Use OBWM?
    BR
    Y.Kaneko

    In OBYC for Transaction GBB,  instead of BSX,  maintain BSA, VAX & VAY for each Valuation Class of material and its respective G/L Account.
    For example, if you are trying for a FERT material, then the entries should be
    0001::::BSA:::::7920::::::4XXX30
    0001:::VAX:::::7920:::::::5XXX30
    0001:::VAY:::::7920:::::::6XXX30
    Also check in OMJJ whether you have the settings as follows:-
    MvT::S::Val.Upd:::Qty.upd:::Mvt::Cns:::Val.stng:::Cn:::TEKey:::Acc mod:::Check acct.
    561::::::::::::X::::::::::::::::::::::::::::::::::::::::::::WA01:::::2:::::GBB:::::::BSA::::::::::::::::X
    561::::::::::::X::::::::::::::::::::::::::::::::::::::::::::WA01:::::3:::::PRD::::::::PRA:::::::::
    561::::::::::::X::::::::::::X:::::::::::::::::::::::::::::WA01::::::2::::GBB:::::::BSA:::::::::::::::::X
    561::::::::::::X::::::::::::X:::::::::::::::::::::::::::::WA01::::::3:::::PRD:::::::PRA:::::::::
    Check whether your settings are similar to above.
    thanks
    G. Lakshmipathi

  • How to make warehouse field inactive for all users in all documents autom.

    Hi All,
    Can anyone pls tell me "**how to make warehouse field inactive for all users in all documents without having to do it through form setting** "for each and every user. It should be visible but inactive
    Thanks & Regards,
    Mukesh Agrawal

    Hi,
    As a work around create a warehouse SelectWH and map the mandatory acoounts as a On hold account(in chart of accounts).So there will not be any posting on this account.
    And set this warehouse as default warehouse for all users.
    So without selecting the appropriate warehouse the user can not add the document.
    I think this might resolve you issue.

  • Change account assignment for posting key-urgent

    Dear expert,
    please advice, when running mb30, in accounting doc for material xxx we want to change account for posting key 91 with other account since the old one is blocked.How to change this account assignment then?
    Thank you

    Hi
    I am not sure whether MB30 Tcode exist. anyways, if you are sure of the Movement type with which your document is getting posted, then you can get the details of the Transaction in the OMWN. In OMWN please select the Movement type and you will see all the Tr Keys.
    Or you can get into OMWB and select Simulation. Give the material, plant and movemnet type and then select the account assignments you will have all the information.
    Regards
    Nambi

  • GL Account assigned for a Material

    Dear All,
    Please let me know how can we find the GL Account assigned for a Material.
    I am having some 10 number of materials. I need to find the GL Account which is assigned for the materials.
    Regards,
    Karthik
    Edited by: Kartyic on Dec 19, 2011 5:27 AM

    Hi,
    G/L Account assigned to a material is nothing but the G/L provided to the valuation class which is assigned to the material in Accounting- view of the material master -MM01.And this assignment of G/L to the valuation class is made in tcode OBYC.
    All the same  kind of material types contain same valuation class.
    Thanks
    Edited by: Madhavi.n on Dec 19, 2011 10:00 AM

Maybe you are looking for