How to make an audio Multi-Unicasts session with JMF&RTP?
Hi,
I am developing an application that could make an audio communications between diffrents users without conferencing or broadcasting.
I have tried to make many separatly unicasts but the application crash.
Can someone help me with a sample of source code in multi-Unicast session? It's very urgent.
Thanks in advance.
Badr.
Hi,
look at this: http://forum.java.sun.com/thread.jspa?threadID=5158056&tstart=0.
My server is a multi-unicast application. Conferencing is here only a kind of administration.
Best,
Andreas
Similar Messages
-
How to make the audio track independent from the video track?
Can someone remind me how to make the audio track independent from the video track? My memory just went blank. Must be the age.
ThanksHi -
Select the clip in the timeline.
Type Command + L or go to the menu Modify > Link to toggle it off.
MtD -
Has anyone figured out how to make the Yamaha 01V96i mixer work with Logic 9.1.8
Has anyone figured out how to make the Yamaha 01V96i mixer work with Logic 9.1.8 as a control surface ?
In YAMAHA01v96i:
Go to DIO/SETUP select Generic DAW. Go to MIDI settings page and set the desired port (personally I use Number 1), Select the same audio frequency you use in your DAW (I use 44.1KhZ)...at this point You should save a scene in you 01V96i to avoid to repeat all the procedure again.
Open studio manager, go to patch and set the input port from 17 to 32 respectively to USB1-USB16 (this will give you the return from you DAW to the 01v96i
Save again the scene overwriting the old one.
in LOGIC
Click on preferences, select Audio then select 01v96i, then click on control surface and select Mackie design Baby HUI and in the midi session set the same port that you've been setting on the Yamaha 01V96i (Port 1 if you follow this example).
That's more or less it.
It worked for me...so far -
How to make your iPad and iPhone commicate with each other
How to make your iPad and iPhone commicate with each other
this is very easy...
firstly disconnect the DSL modem for the linksys..
then connect the computer to the linksys router (port 1/2/3/4)..
then access the linksys setup UI
open ur web browser
site: http://192.198.1.1/
username: [blank]
password: admin
now hook up the westell modem.. and goto the status page ...
check Internet IP.
if then Internet IP is 192.168.1.* then,
disconnect the westell from the router and goto the setup page.
change the LOCAL IP address to 192.168.2.1 (notice the 2.1 and not 1.1)
save settings....
connect the westell and viola ur online...
if the Internet IP is 0.0.0.0 then
goto the setup page and change the 'Internet connection Type' to 'PPPoE'
once done the page changes and give u a place to enter a username and a password.. this username and password is given by verizon..
sud be something like '[email protected]'
once done save settings...
goto the status page and hit connect... give it a few moments... u shud get a Internet ip address... if u get one ur online if not then power cycle the entire network. and try check to see if u get an ip..
hope this helps...
cheers..
Life is short... So get movin !!!
DopeLorD -
Hello, i would like to know how to make horizontal sites and it moves with the scroll
Hello, i would like to know how to make horizontal sites and it moves with the scroll
Hi
You can refer to these videos :
http://www.lynda.com/Muse-tutorials/basics-horizontal-scrolling-websites/108131/115685-4.h tml
https://www.youtube.com/watch?v=gZI_K1TXqOM
Thanks,
Sanjit -
How to make list item multi select
Hi all,
I'm suing Oracle 10g and I want to make a TList multi-selectable and then how I can return the selected records
Thanks in advance :)This is where you should go
ttp://www.oracle.com/technology/sample_code/products/forms/index.html
in add , with it is not possible with a default TLIST, LOV ...., so you'll need to create your own:
for example, I use a normal block with a checkbox on each row for the user to select records -
How to make an audio file on Dreamweaver not auto play?
hi,
ive been trying to make my audio file on dreamweaver not play when the webpage is opened.
i have tired the 'autoplay, false' however this dosent seem to work for me. im using Dreamweaver CS6
im hoping for some help as this is becoming frustrating!
and i am using a music file which has been downloaded!At a minimum, you need MP3 and OGG audio files. If you don't have them, use the online converter below: http://media.io/
With an HTML5 doc type, your code should look like this:
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>HTML5 Audio Demo</title>
<!--[if lt IE 9]><script src="http://html5shiv.googlecode.com/svn/trunk/html5.js"></script><![endif]-->
</head>
<body>
<p>This works in all modern browsers. </p>
<audio controls>
<source src="path/yourSong.ogg" type="audio/ogg">
<source src="path/yourSong.mp3" type="audio/mp3">
<p>Your browser doesn't support audio.</p>
</audio>
</body>
</html>
Nancy O. -
HT2801 How to make external "SuperDrive" work on iMac with failed built-in?
WHY is my new external "SuperDrive" "designed exclusively for use with Mac computers that do not have a built-in optical drive"? How can I make it work on my iMac with a failed built-in "SuperDrive" that was obviously junk to begin with? I ordered it from a Staples kiosk that had zero product information but the name of the product was USB SuperDrive and it was made by Apple so I reasoned it would run on my Apple. I bought an LG 2 months ago when the built-in failed but the LG only worked about a month then every disc burn was aborted as "error." So I bought new burn software from the Apple app store but still "error" so I went to Staples and bought this and it didn't work so I ise a magnifying glass to read the light grey letters on the white box and it says "Compatible with Mac systems without a built-in optical drive." I found articles online advising how to hack my own computer to make this work but I am low-tech and afraid of wrecking my computer. I am FURIOUS with Apple, I buy it only because Windows gave me such grief but honestly Apple hardware has OFTEN proven itself short-lived and low quality. PLEASE how do I burn an audio CD with my stupid iMac peice of garbage?
Calm down.
If you so choose here are some quality optical drives you can purchase, online here.
http://eshop.macsales.com/item/OWC/VLU2SD24XS/
http://eshop.macsales.com/item/OWC/MR3F82SD24S/
For Mac burning software, you can purchase and use Roxio Toast.
http://www.roxio.com/
OR you can try this freeware software called simply Burn.
http://burn-osx.sourceforge.net/Pages/English/home.html -
Anyone know how to make a QT .mpg? (mpeg2 with sound)
I have a gig making QT file for this display that plays from a flash card, it just loops the content on the card but it needs a .mpg(mpeg2 file with sound) I can not seem to figure out hoe to make this kind of file. Compressor only makes m2v files and I can not play then in QT for some reason.
I have QT files that work in these devices so someone made them.
Any one know how to do this?
Thanks, MarkWhen I need to make these files I create the MPEG-2 video & MP2 audio in compressor, then join the resulting files with BitVice Helper, a cool free app.
'How do you make MP2 audio in compressor' I hear you ask. Choose the DVD : MPEG-1 preset & turn off the video encoding, resulting in an audio only file (pay no attention to the file extension).
Combine this with the MPEG-2 video in BitVice Helper and the resulting .mpg is good to go.
Creating the files with compressor like this is handy for jobs that have multiple destinations.
Jono! -
I have HP Deskjet 3940 Printer. I recently purchased a Lenovo desktop( C320, 57-302429) which has Windows 7,home basic,32 bits operating system. The said printer does not work with the above computer. Please guide how to make this printer compatible with the above operating system.
This question was solved.
View Solution.1. Click the Start button, click Control Panel and double click Devices and Printers.
2. Click Add a Printer.
3. Select Add a local printer.
4. Choose an existing USBx Local port, click Next.
5. Click the Windows Update button.
6. After the update finishes, search for the 3940 driver.
7. click Next,Next,Next,Next,Finish
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee. -
How to make the active save-to-file with the data from GPIB ?
Hello,,everybody !!
I want to make the active save-to-file with the data from GPIB since starting the measurement. To save-to-file at the end of measurment is somehow risky for losing the data because my measurment have to take for long time (eg. 24-48 hours).
Thank you in advance for anybody's help !!Thanks Dennis,
I have already append, I got it but still have one small problem that between each line it has the blank line. Example as below ,
16:40:33 54.24
16:40:34 54.23
16:40:35 54.24
I want to get rid of the blank line in between.. Do you have the idea about it ? -
How to make an audio clip sound like it is on a radio?
I have an audio clip and I need to mess with it to make it sound like it is on the radio, how do I do that?
Hey Pat
"The new system for discussions asks that after you mark your question as solved, you take the time to mark any posts that have aided you with the helpful tag and the post that provided your answer with the solved tag. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
If we use the forums properly they will work well..." -
How to make a single multi-view clip from different cameras?
Hi,
I recorded one conversation between two people with two different cameras (i.e., a camera per person) and I'd like to create a single video clip where the two clips from the two cameras are positioned side by side, i.e., one clip of the two people talking. I tried creating a Multicam clip but I didn't see an option to export the sequence as a single clip (also there was no option of how to place the clips which suggested that Multicam clip may not be the solution for this).
Is there a way to do that in Final Cut Pro X?
Of course, this would also involve synchronising the two clips based on the audio waveform and then detaching the audio from the non-master clip.
Any advice and recommendations will be highly appreciated.
Cheers,
KatyaThis may be helpful.
Russ -
How to make an exception to RDS session Idle Time Limit?
A little bit of background:
We are running WYSE Thin Clients to connect to a RDS server farm at our company. We have set the Idle Session Time Limit to 12 hours, in Remote Desktop Session Host Configuration (in Connection --> Properties --> Sessions tab). This limit
is a site requirement.
The issue: We would like to configure a few accounts to stay logged into the RDS server indefinitely, past the 12 hour limit. How can we do this without changing the time limit for everyone?
I have tried a script to simulate mouse movements/key presses at intervals on the client session to trick RDS, but Remote Desktop Service Manager does not show that the script affects the idle time for that client. Is there another automatic way to simulate
user input to keep the client session active? What kind of hardware interrupt is RDS hooking into to determine that a human input has been pressed? A script would be the least intrusive to our infrastructure so if it is possible this is definitely preferred.
I've heard that Group Policy may be a solution here - but our local IT department do not have admin access to the Domain Controller for our site, it is managed by a third party. However, if I were to solve this using group policy, what would be the
steps? I would appreciate a step-by-step walk through if it is possible. We would have hundreds of users that need the 12 hour limit applied, and only a few that needs the infinite logon - so please keep practicality in mind.
Thanks in advance to anyone who helps.Hi,
Thank you for posting in Windows Server Forum.
In your case, I would like to suggest the steps for you. Yes, you need to take this successful via group policy.
You can create 2 group: Just for reference:
Group 1- MinLoginTime
Group 2-MaxLoginTime
Add the required users to particular group.
Users upto 12Hrs- MinLoginTime
Users above 12 Hrs- MaxLoginTime
Now need to apply group policy setting on this required groups.
Group 1- MinLoginTime:
Set time limit for active but idle Remote Desktop Services sessions-
Enable -Set 12 Hrs
End Session when time limits are reached- Enable
This is because it will disconnect the session of your users who reached to 12 hrs.
Group 2-MaxLoginTime:
Set time limit for active but idle Remote Desktop Services sessions-
Not configured\Disable
If you disable or do not configure this policy setting, this policy setting is not specified at the Group Policy level. By default, Remote Desktop Services allows sessions to remain active for an unlimited amount of time.
You can find the above setting option under below mention path.
Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits
User Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits
Note: These Group Policy settings will take precedence over the settings configured in Remote Desktop Session Host Configuration. If both the Computer Configuration and the User Configuration policy settings are configured, the Computer Configuration policy
settings take precedence.
More information:
Configure Timeout and Reconnection Settings for Remote Desktop Services Sessions
http://technet.microsoft.com/en-us/library/cc754272.aspx
Hope it helps!
Thanks.
Dharmesh Solanki -
How to make raw audio sample to QTMovie?
Hi,all.
I'm a newer to QTKit.Now i want to add some series of raw audio samples to my QTMovie.The raw audio samples contain some propertys about the audio.such as sampleRate,channelPerframe and so on .
According to search the interent,I found to use the propertys to fill with the "AudioStreamBasicDescription" struct.then,use the api of "QTSoundDescriptionCreate" to get the SoundDescriptionHandle.At last use "AddMediaSample".Only this ,I didnt find any useful sample code.So could anyone give me some useful information about it ?
Thanks in advance for every reply.Hi Sharathm,
I saw that you were using Background Task to detect the Local Setting "toast", based on its value, you could determine whether the sending notification operation was needed.
In my view, you are in the right direction, the Background Task helps us to do work in the background.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Maybe you are looking for
-
Problem in first request's navigation in JSF
Hi all I want to redirect to first page of application thru faces-config. Please have look at the code flow 1. First time request comes to our Java filter, this filter forward the controle to our facelets (i.e. dispatcher.xhtml). 2. From this facelet
-
How to get the Users Name from the SSL certificate?
Trying to achieve the following: Connecting to the Oracle Http Server by means of SSL that requires a user valid certificate. Then being able to get the Users Name from the SSL certificate to prepopulate the APEX login authentication page with the us
-
Transporting Error: "Signed a business system in TEST"
Hi, While transporting a scenario from dev to test using cts+, I am getting the following error. "Signed a business system in TEST" Pls give some solution. Br, Madan Agrawal
-
Cannot see full email message in outlook 2011 inbox
I can only see trancated emails after a one month, how do I display full email messages in the inbox.
-
Why can't Flash CC compress a SWF as well as Flash CS 5.5?
Does anyone out here know why this happened? I have a FLA file from which I needed to export out a SWF no larger than 40kb. Without changing any of the settings, the SWF exported out as 63kb. So I opened up the FLA in Flash CC and went to Publish Set