How to make an before and after effects?

So, I want to make a video that show the audience this is before and after the edit. And i want to make it look like this YouTube Rewind 2014: Behind the Scenes - YouTube
How to make it?
Thanks:)

Really? You take footage of you shooting the video with another camera then you edit it together with shots of the finished project. If you want to show before and after shots of an effect you just put the original footage on top and animate a mask or opacity to reveal the rendered effect below.
If you can't figure out how to make a before and after then you will have a very difficult time doing any effects using AE because there is absolutely nothing in this before and after but very basic editing and masking.

Similar Messages

  • How much does Premiere Pro and After Effects rely on the hard drive it's installed on?

    This may be a really dumb question, but how much does Premiere Pro and After Effects rely on the hard drive it's installed on if all your video files, assets, disk cache, etc are on different drives than the one the program itself is installed on?
    The reason I am asking is that I currently have a "relatively" slow Sata II SSD for my C drive that has just my OS (windows 7 64bit) and programs (adobe editing programs, no games) installed on it and nothing else. All of the files used in my projects are saved on either a very fast Sata III SSD or a slower HDD depending on what the files are. For example, disk cache on the Sata III, stills on the HDD.
    Being cyber monday I have the opportunity to buy another very fast Sata III SSD to replace my current Sata II SSD C Drive (just OS and programs). Both synthetic and real world benchmarks show a near double in performance. I just want to know if anyone thinks the upgrade is even worth it because for all I know there won't be any increase in performance since no videos, still, cach, etc will be stored on the C Drive.
    The alternative is to get a second monitor because I currently only use one 21" monitor.
    I suppose another alternative would be to not buy anything on the cyber monday deals and just save money for something else.
    Any advice or input would be greatly appreciated. Thanks!

    Thanks Alex! I think you are right about not being able to notice the difference between the SSDs. I ended up finding a deal to get about $80 off a great monitor that I've been looking at for a while and decided to pull the trigger on it. I thought about it and realized that there have already been a bunch of times where I want to watch a tutorial on youtube and follow allong in AE or PrePro, but have to keep switching windows. I also frequently want to have my video preview on a separate monitor so I can have a taller timeline window. This monitor will help a lot with that. Thanks again for your help!

  • How much is iPhone before and after taxes?

    how much is iPhone before and after taxes? I am from the Philippines and I am just wondering buying it online with my credit card. i know that it costs $399 for 8GB and $499 for 16GB.

    I bought mine day one, so the pricing isn't the same anymore.
    As for the one your Aunt buys, she will pay either $399 or $499, depending on model, plus applicable CA sales tax, which I do not know.
    Keep in mind that you will not be able to activate your phone in the Philippines in its virgin state. Keep in mind as well that currently there isn't a good way to "devirginize" a 1.1.3 iphone.

  • Move scrubber-before and after effect on 2 photos

    I want to use an interactive move scrubber like the one used on this link http://www.perthnow.com.au/news/world/christchurch-cathedral-before-and-after/story-e6frg1 ql-1226010081646
    Can anyone tell me if this is doable in Adobe?

    Thank you Nicoptere!
    Now, of course, I have another question.................I have been looking for information on how to do this in Adobe and haven't been lucky. Probably I haven't been searching with the correct name "move scrubber"
    Do you know the correct name or where to look for such info, or even better, do you have any idea how to do this effect?
    best

  • How to compare value before and after

    hi,
    one of the queried Values ​​is the number of defective frames.Here, this value is compared with a previously sampled value
    If now (after 10 s) this value is bigger than previous one ,then It saves new value otherwise loop will be continue.If again after (10s) the new value is bigger than  previous  new value then again saves this new point.how can i comapre value before and after?thanks.
    Tadhika

    Do you know what a shift register is? It preserves a value from one loop iteration to the next. Please read the LabVIEW Help on shift registers. There's is also a simple example that ships with LabVIEW that will give you the basic idea (Help -> Find Examples).
    You can also use a Feedback Node in lieu of a shift register. Same concept, different implementation.

  • How do I download Photoshop and after effects on Vista?

    Hi, I have Windows Vista , and I want to download Photoshop and After effects, but the latest version is not supportable on Vista, what should i do?
    Thanks for your help

    Ok, thanks for the answer, I was considering getting a new PC any ways

  • How do I export 2 picture next to each other on the same page for a before and after effect?( a 2 in one picture)

    Hi,
    This link pretty much sums sup what I want to do Francesco Tonelli PhotographyPortfolio - 35. I have read a lot of blogs explaining that the way to do it is in the print module page. I tried this but when I save the picture, I lose edits and my whites become off brown. Is there a way to just export the pictures as a 2 in 1 format?

    There is not an "Export" option from the Print module, so you need to understand that "Print to JPG" is in fact creating (or 'sending') a new image file somewhere in your computer. You should also have selected all the printing options in the print panels, just as you would if you were printing on your own attached printer.
    When you click on the "Print to File" button, Lightroom should offer you a dialog to save the new (dyptych) image in a folder of your choice with a name of your choice. Note: You must remember where you saved this new image file!
    This new image file will not appear in the Lightroom library, so to have it appear in your Lightroom library you must either use the "Import" module, or the "Synchronize Folder" option-  Locating the new file or folder where you saved it!  Only after this will you see it in Lightroom, where you will now have access to all Export functions to resize, etc.
    If you do not need to see it in Lightroom- there is no need to import it, just use your computer system file finder to locate the JPG file to send, print, email, etc.

  • How to insert animation before and after this animation template??

    I'm using the file from the online template below, but am going to replace the flag with a man's tie that's going to be "flapping in the wind" momentarily.
    BUT I need to add a small amount of animation before this "flapping" animation begins, as well as after it, and I only want the flapping to last about 1.5 seconds or so - not continually looping.
    http://www.senocular.com/flash/source.php?id=0.188
    I don't know how to even begin to add the animation I need before/after, and to edit the time down on the looping. Any help is GREATLY appreciated!!

    change the flag to your tie and change the onEnterFrame loop:
    use
    loopI = setInterval(loopF,40);
    to start the waving and use:
    clearInterval(loopI);
    to stop the waving.
    function loopF(){
        // move the matrix by speed along x to shift the noise
        shift.translate(speed, 0);
        // drawing in the perlin movie clip,
        // create a rectangle with the perlin noise
        // drawn in it with an offset supplied by the
        // shift matrix
        with (displace_mc.perlin){
            clear();
            beginBitmapFill(noiseBitmap, shift);
            moveTo(0,0);
            lineTo(ramp._width, 0);
            lineTo(ramp._width, ramp._height);
            lineTo(0, ramp._height);
            lineTo(0, 0);
            endFill();
        // draw the displacement movie clip in the
        // displaceBitmap (used in displaceFilter)
        displaceBitmap.draw(displace_mc);
        // apply displaceFilter to the flag
        flag_mc.filters = [displaceFilter];
    updateAfterEvent();

  • How to validate performance before and after turn on Trace Flag 2371

    Hi Friends
    I have 5 TB DB for AX.
    What homework I am supposed to follow to collect some evidence of performance improvement after I turn on -T2371
    Regards,
    Anjan

    Once you have
    turned on the traces, you’re probably going to want to determine whether the trace is actually running. To do this, you can issue the
    DBCC TRACESTATUS command. One method to issue the command is to interrogate whether a given trace is running:
    DBCC TRACESTATUS (3604)
    If you want to see all traces that apply to the connection, run the command with the -1 parameter:
    DBCC TRACESTATUS (-1)
    DBCC execution completed. If DBCC printed error messages, contact your system administrator. Your instance of SQL Server
    should not have trace flags turned on indefinitely, unless you have been instructed by Microsoft Product Support to do so.
    I hope this might help you a bit.

  • How to set spacing before and after paragraphs in IOS Pages

    Is there a way to do this in Pages for iPad?

    Hi ghn!
    I believe you are asking about paragraph margins. If so, here is an article that will help you adjust this in Pages for iOS:
    Pages for iOS (iPad): Set tab stops, align text, and adjust paragraph margins
    http://support.apple.com/kb/PH3548
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • How do I do a before and after split photo?

    I am brand new to photoshop and can't figure out how to do a before and after split photo. Can anyone help please?

    Put your before photo at the bottom of the layer stack.
    Put your after photo above it.
    Use the Rectangular Marquee tool to make a selection (on that "After" layer) of the part you want to show.
    Use the "Mask" icon at the bottom of the Layers Palette to create a mask for that "After" layer.  The mask will automatically use your selection.
    Ken

  • Before and after

    In PSE 9 how can I see before and after
    images in full edit mode?

    I don't know how familiar you are with PS. So please apologize if my proposal may sound improper or confusing.
    In PS there may be of course lots of "befores" and "afters". Therefore, I would recommend you to use the "History" panel enabling you to easily switch between different states of your editing procedure. Also within the History panel there should be a "Snapshot" feature (I know there is in PS - not sure if this is valid also for PSE) which makes it even easier to name and identify a "before" (or "after") state.
    Some users prefer to create a duplicate of the original file first to avoid undesired changes and to be able to compare original and duplicate.
    A 3rd option (which I use very often) is to just duplicate the background layer. You then simply apply your tweaks to the resulting "background copy" layer and can switch this layer "on" and "off" (just by clicking on the eye symbol) within the layer panel.
    I hope that may be helpful. Please excuse if I misunderstood and you know all these features already.

  • I need to reinstall my computer, how do I deal with Premiere pro and After effects?

    Hello,
    As my question states I need to reinstall my computer (laptop) and I'm not quite sure on how to deal with Premiere pro and After effects.
    I am thinking that I need to do some sort of backup and save my projects and footage on a sepparate drive.
    If I reinstall my computer, install my creative suit production premium, and move back all of my projects and footage, won't I have to re-link every single clip?
    I am currently workning on several different projects and having to re-link everything is something I don't even want to think about, that would take me days if not weeks.
    Another option on my mind would be to use Creative cloud. I do have the free version but I have never used it even once before and I'm not quite sure what the purpose of the cloud is and if this is a way to use it.
    I have no idea how to go about this computer reinstalation without either loosing tons of work or having to re-link every single clip used.
    I am videoediting only as a hobby so I have no experience working with other people and sharing projects or the like, wich is my understanding of what the cloud is for.
    Any and all help would be grealty appreciated, I know this is probably really easy but ever since i got my Suit I haven't reinstalled, upgraded och changed my computer so I am just clueless as to how to go about this.
    I have Creative suit production premium, I also have the free Creative cloud.
    It is only Premiere pro and After effects that I am using and am worried about.
    Thank you for any help.
    -Lisa Kajupank
    (and oh, I just notice my name - umustbejoking - I think I just wrote that cause they wouldn't let me use anything else, saying it was already taken. So nevermind that haha.)
    Message was edited by: umustbejoking

    If the computer's running Mac OS X, move the cursor to the very top of the computer's screen, click on Store, and choose Authorize this Computer.
    If the computer's running Windows, press the Alt and S keys and choose Authorize this Computer, or click here, follow the instructions, click on Store in the menu bar, and choose Authorize this Computer.
    (84620)

  • How to use Time Machine before and after installing a new hard drive

    So basically I'm buying a new hard drive for my Macbook pro and I have a lot of files on my computer that I would like to save. I have never used Time Machine before so I need help on how to set it up before AND after installing the harddrive so my files get transferred onto the new hard drive. Thanks in advance

    wjosten wrote:
    Me, I would never use Time Machine to do this. What I'd suggest you do is get an exterior enclosure for your new drive. Then use either Carbon Copy Cloner or SuperDuper to clone your existing drive to your new drive. Once done, verify your clone is bootable & all of your data present. Then swap drives & use your old drive for Time Machine backups(after erasing it). Then get another drive & exterior enclosure to regularly clone your new drive to.
    Unless he was swapping for a lower capacity HDD or to a lower capacity SSD, then the old drive would make a lousy Time Machine disk.  However, whenever I swap out a disk I do exactly what you do.  CCC to get the ol drive onto a new one.  Test by starting up to the new (but still external drive).  Then replace the internal drive.
    I usually just sell the old drive on eBay.  My Time Machine backup is always 2X the size of the internal drive, which I believe is a bit above recommendations, but works for me.  The price of large external drives is almost the same as smaller internal ones.

  • How can I control the space before and after text in a table

    Hello
    I have a series of icons with descriptions, these are lined up with icons on the top row and description text in the bottom row. Each icon and description is divided by a stapled line.
    The text is of varying width, therefore the column width must also wary. However I would like to make the space before and after the text equal in all instances (See image).
    If there is anyone that can tell me how to do this with tables or any other tools I would be very thankful.

    The only way I can think of to maintain equla spacing between the text ov vartying lengths and the vertical lines is to put each icon/text pair in it's own frame fitted to content, make each vertical line a separate object, then select them all and distribute the spacing.

Maybe you are looking for