How to make an entire word spin/rotate?

Is it possible to make an entire text word spin round.
Moreover, can I zoom the word in whilst spinning?

apply Spin behavior to Text
apply Dolly behavior to cam =>
text spinning, 'zooming' into word.
Like that?
(for sure, you could keyframe the cam's focal length to create a 'real' zoom ... )

Similar Messages

How to make the entire project in the project server 2013 reschedule؟

How to make the entire project in the project server 2013 reschedule ?
Because item %compelet related to reschedule
In this photo it is known there are no items update project

Hi,
In PWA, you do not have the feature to update the project plan in one click, meaning marking as completed the work before the status date or reschedule after the status date the remaining work. Either you have to use Project Pro, or edit individually the
assignments with the actual work (if not comming from timesheets) and remaining work.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

How to make a link word a color?

Hello There,
I have made a few words bold and then made them green. When I make this green word a link to an external website it changes from green to gray. No matter what I do I can't get it back to the color green. Does anyone know how to do this?
Thanks,
Mike

The only way that you can change the colour and underlining of hyperlinks is to go to the Inspector and click on Hyperlinks and Format.
If the Hyperlink is already active don't underline the whole link. I have found that that will not work. All you need do is go to the Hyperlink and just click it to highlight and then you can change things.
At times, it can be stubborn to change, but just click in the link box and that should highlight the whole link and then just keep clicking until the colours and underlining changes.
That is the only way you can do it.

How to make a rasterized word look like it was written with dirt?

Im trying to make an image where this word looks like it is written in dirt on the sidewalk. Iv' already taken a pile of dirt and created a clip mask out of it but it doesnt look natural enough. How do I do this so it looks realistic? And this is a graphic not font and I am using photoshop cs6. Thank you.

I'll just add a little footnote to the above, while I'm thinking about it. One problem with layer styles - especially complex ones like Bevel & Emboss, is that you have limited control of the different aspects of the effect. I didn't use Bevel & Emboss in the above example because the highlights were too strong, and made it look wrong.
A way round this is to right click the effect and choose 'Create layers'. This breaks up the effect into one or more layers, so you can reduce, say, the highlight without effecting the shadow.
I think if I was trying to do a stand out job, I'd use a finer font, so it looked like it had been drawn with a stick, and I'd use a combination of Bevel and Emboss layer style to get the depth, but I'd also use JJ's idea of a displacement map clipped to the text layer, to roughen the edges realistically, and add texture to the bottom of the indented text.
An alternative is to find a suitable texture, and save it as a Pattern. That would make it available to use as a 'Texture' in the Bevel Emboss sub options. The beauty of this is that the texture works very much like a Displacement map with depth and lighting effects. In fact, I think that might be the easiest way to go about it.

Anyone know how to make folders for Word and Powerpoint?

I've been trying to make folders for my word documents. i dont know how though!! Thanks for the help!

Open Finder, highlight your Macintosh HD and select New Folder. Name it whatever you want. In Word there is an option to Save File in X folder. Select that new folder you created. Alternative to this is when saving a file a dialog window will open where you can select the folder to save in, select the folder you created and there should be an option to make this the Default folder to save to (but not sure about that option in the Save dialog box).

11g Process Train: How to make the entire train's width or height larger

I cannot see how to do this using
-Property inspector
-Skins and their appropriate selectors
I can do this using plain html by setting the table's width, yet again this isn't possible thru ADF, and again, the CSS width attribute doesn't expand the table.
example (the processtrain renders as an html table):
<table width="500"> -works, but not possible in ADF
<table class="..."> (set the width thru the skin/property inspector (does not work)

Hi,
skinning will do. Below are the available selectors
af|train      Top level style class for the entire train component. The number of stops to be displayed step is also specified using the property -tr-visible-stop-count. Valid values must be integers and greater than zero.
af|train::body      Styles the container which encloses both the train content and the start and end overflow indicators.
af|train::start-overflow-indicator      Styles the start overflow indicator. The start indicator is specified using a background-image.
af|train::end-overflow-indicator      Styles the end overflow indicator. The end indicator is specified using a background-image.
af|train::content      Styles the container which encloses the train content (excluding the overflow indicators).
af|train::parent-start, af|train::parent-end      Styles the block that encloses the parent-start (and parent-end) elements, such as its icon and label.
af|train::parent-start-icon-cell      Styles the cell that displays the parent start icon.
af|train::parent-end-icon-cell      Styles the cell that displays the parent end icon.
af|train::parent-start-content      Styles the cell that displays the parent process name at the beginning of the train.
af|train::parent-end-content      Styles the cell that displays the parent process name at the end of the train.
af|train::join      Styles all joins between stops. Available pseudo-classes are :disabled, :unvisited, and :train-visited.
af|train::stop      Cell that encloses all the stop elements including icon and content.
af|train::stop-icon-cell      Styles the cell that displays the stop icon.
af|train::stop-icon-selected      Used to set the background image for the selected stop.
af|train::stop-icon-disabled      Used to set the background image for a disabled stop.
af|train::stop-icon-unvisited      To set the background image for an unvisited enabled stop. Use pseudo-classes :hover and :active to customize look.
af|train::stop-icon-visited      To set the background image for a visited stop. Use pseudo-classes :hover and :active to customize look.
af|train::stop-content      Content block that displays the stop name. Use pseudo-class :selected to style content for the currently selected stop. :required to style the required indicator, if stop is selected.
af|train::stop-link      To skin all links that display the stop name. The pseudo-classes :selected can be used to style a link for the currently selected stop. :disabled to style a disabled link. :visited for a visited enabled stop
and :unvisited for an unvisited enabled stop. Due to a bug use :train-visited instead of :visited.
af|train::stop-icon-error      To set the background image for a stop that is in error. This is overlaid on top of the stop icon.
af|train::stop-icon-warning      To set the background image for a stop that has a warning. This is overlaid on top of the stop icon.
af|train::stop-icon-information      To set the background image for a stop that has some information. This is overlaid on top of the stop icon.
af|train::stop-icon-confirmation      To set the background image for a stop that has a confirmation status. This is overlaid on top of the stop icon.
Note that to increase the icon height and width you most likely have to change the icons
Frank

Almost finished!! How to make JButton Text word wrap??

Is this possible? If so, how or, where do I go to get the answer. After reviewing the JButton class (which I really don't always understand the leap between the API documentation and the actual code that is derived from it) and its constructors, methods and inherited everything, I cannot seem to find a way to make my text wrap in a JButton.
It just disappears to the right, but nicely centered.
Much appreciation.

This is why you don't post the same question multiple times....
I answered your question in your other thread, and was all ready to ignore this thread when I saw the dukes.
Answer is here:
http://forum.java.sun.com/thread.jsp?forum=54&thread=372505&tstart=0&trange=15
Cheers,
Radish21

How to make a entire column editable in an ALV grid

Hi all,
         I am trying to make a column editable in an ALV grid. For that I wrote the following code. In the below code I have set the 'edit' field of ls_fcat to 'X'. But Iam getting Runtime error. Can anyone help in resolving this problem or suggest any method to make a column editable in an ALV grid.
form prepare_fc changing go_fieldcat type lvc_t_fcat.
data: ls_fcat type lvc_s_fcat.
refresh: go_fieldcat.
clear: ls_fcat.
ls_fcat-reptext   = ' Safety Stock Figures'.
ls_fcat-coltext    = 'Safety Stock Figures'.
ls_fcat-fieldname = 'EISBE'.
ls_fcat-ref_table = 'IMAT'.
ls_fcat-edit = 'X'.
modify go_fieldcat from ls_fcat.
APPEND LS_FCAT TO GO_FIELDCAT.
endform.
Thanks & Regards,
Vishnu Priya.

ls_fcat-edit = 'X'.
is correct only.
have a look into this code
struct_grid_lset TYPE lvc_s_layo,
i_grid_fcat    TYPE lvc_t_fcat
DATA ls_fcat TYPE lvc_s_fcat.
CLEAR ls_fcat.
ls_fcat-fieldname = 'MONTH'.
ls_fcat-ref_table = 'TYPE'.
ls_fcat-ref_field = 'C'.
<b> ls_fcat-edit      = 'X'.</b>
ls_fcat-coltext   = text-030."Month
ls_fcat-seltext   = text-030.
APPEND ls_fcat TO p_i_grid_fcat.
CLEAR ls_fcat.
ls_fcat-fieldname = 'YEAR'.
ls_fcat-ref_table = 'TYPE'.
ls_fcat-ref_field = 'C'.
ls_fcat-coltext   = text-031."Year
ls_fcat-seltext   = text-031.
APPEND ls_fcat TO p_i_grid_fcat.
CALL METHOD o_grid->set_table_for_first_display
      EXPORTING
        i_bypassing_buffer    = space
        is_variant            = ws_f_grid_disvar
        i_save                = ws_c_grid_save
        is_layout             = struct_grid_lset
      CHANGING
        it_outtab             = i_grid_outs[]
        <b>it_fieldcatalog       = i_grid_fcat[]</b>
        it_sort               = i_sort_fcat.      " Period
Also Check this code.Another way using field symbols.
i_fieldcat    TYPE lvc_t_fcat,
       w_layout TYPE lvc_s_layo ,
       w_variant TYPE disvariant.
FIELD-SYMBOLS : <lfs_fieldcat> TYPE lvc_s_fcat.
*Default display
LOOP AT p_fieldcat ASSIGNING <lfs_fieldcat>.
    CASE <lfs_fieldcat>-fieldname.
      WHEN 'GL_ACCT'.
        <lfs_fieldcat>-coltext = text-050.
        <lfs_fieldcat>-no_out = ' '.
        <lfs_fieldcat>-scrtext_l = text-050.
       <b> <lfs_fieldcat>-edit    = 'X'.</b>
WHEN OTHERS.
    ENDCASE.
ENDLOOP.
Hope this helps.

How to make an entire Oracle Schema View Only ?

Lets say I have a schema called "scott" in oracle database.
Now I created a new user called "john".
I wanted "john" user to fully access "scott" schema in view only mode.
Can this be done easily, if YES how.
Please give me the steps.

CKPT wrote:
you have to spool all the objects in this case...No all objects only scots tables ,that is good way!
what do you say on grant select any table to user;..The purpose is giving only select privilege on scots all tables/views to jhon user.If you give select any table to jhon then jhon will select any schema!.That is wrong

HT1145 forgot my pass word on my airport express,how to make new pass word

forgot my pass word for my airport utility,can not update without a pass word

Try this User Tip from forum expert Tesserax:
AirPort - Regain Access from Forgotten Passwords
If no luck here, then study the information about a Soft Reset in this Apple support document to reset your password(s):
Resetting an AirPort Base Station or Time Capsule FAQ

How to find a specific word in sentence in each line?

How to find a specific word in sentence in each line and output will show start from the beginning from specific word plus with small description from each sentence?
For example: I need to find a "+Wednesday+" and "+Thursday+" word in each sentence by line by line from "myfile.txt".
Go ballet class next Wednesday.
On the Wednesday is going to swim class.
We have a meeting on Thursday at Panda's.
Then it will show the output:
Wednesday : ballet class
Wednesday : swim class
Thursday: meeting at Panda's
I am going to figure out in Java console to read from a file for specific word from each line and how to make it output in correct way. I know already to make input/file codes.

I got it and understand much better. Thank you very much. There is a problem with it because I knew how to make
a specific word in sentence but how I should make Output for specific word and some words from sentence.
For example:
Input:
+"On Thursday go to ballet class"+
+"Swim class on Friday one time a month at 2 p.m."+
I used the codes for that:
class FindSchedule{
     String firstline = "On Thursday go to ballet class ";
     String secondline = "Swim class on Friday one time a month ";
     FindSchedule(){
          System.out.println(firstline + findTheIndex("Thursday", firstline));
          System.out.println(secondline + findTheIndex("Friday", secondline));
     public int findTheIndex(String word, String sentence){
          int index;
          index = sentence.indexOf(word);
          return index;
     public static void main (String[] args){
          new FindSchedule();
}The output will be:
Thursday: ballet class
Friday: 14:00 swim class one time a week
Notice that time is changing in output complete different from input.
I need to find out how to extract some words from each sentence for output. Do you know how to do it?

How to Make Parallax Scrolling Linger Longer in Position?

Hi,
I have downloaded the sample paralax file from this tutorial (http://tv.adobe.com/watch/muse-feature-tour/adobe-muse-parallax-scrolling-may-2013/), and I'd like to ask how to make the formed words, once in position, to linger for a certain time of scroll in their position, and only then move away.
Thanks for your help, and please ask if further clerification is needed.

Currently Muse doesn't support what you are requesting.
At the moment Muse allows you to set one key position and define actions before that key position and after that key position.
What you're requesting is :
01. before key position - do action (move)
02. for duration of scroll - do action (don't move)
03. after key position - do action (move)
If you would like to see this enhancement. Please request it in the Ideas section.

I'm converting a word doc to a pdf and have a color spin wheel - going on 10 min now. any clue as to why? or how i make it stop?

I'm converting a word doc to a pdf and have a color spin wheel - going on 10 min now. any clue as to why? or how i make it stop?

Hit command tab and swtich to the Finder, under the Apple menu is Force Quit, do that to the program that is causing your "hang" and restart the program and what you were doing.
If you didn't save your file beforehand, then your going to have to make it again.

How to Capitalize the first letter or an entire word using a shortcut on the keyboard just like in microsoft that uses shift+F3

please how can one How to Capitalize the first letter or an entire word using a shortcut on the keyboard just like in microsoft that uses shift+F3

What do you mean there was "no effect?" I'm not aware of any effects.
It looks like that Service is also in the App Store. From their screen shots, the services are prefaced with WordService:
You can see an example in the App Store for their app: App Store
After installing, you should now have those text services in your Services menu. You can then add shortcuts in the Keyboard System Prefs.
Most Apple apps have a Transformations menu in the Edit menu. You can Make upper, lower, and Initial caps with those. I would stick with Word Services, but you can make Application Shortcuts for the items in the Transformations menu.
Again, in Keyboard System Prefs, Under Applications, Click the Add button on the right side pane.
Set it for All Applications
Enter the menu command exactly as they appear in the Transformation menu (separate entries for each),
Make Upper Case
Make Lower Case
Capitalize
Give them a shortcut.

How to make screenshot/jpg/pdf of ENTIRE long Safari window (not just visible part)?

I want to get a "screenshot" (i.e. an image in any format -- PNG, JPG, PDF, whatever) of a looooooooong Safari window diplaying a Web page that entends far below the bottom of the visible screen area and has to be scrolled down to see all of it.
I know about the standard screenshot keyboard tricks in 10.6 -- Command-shift-4, Command-shift-4 then spacebar/click, Command-shift-3, etc. But not any of them allow the user to get a screen shot of the entirety of a long/deep window -- they only capture what is visible on the screen.
Also, another trick people often mention is to "print" (command-P) the Safari page, but instead of sending it to a printer choose "Save as PDF." Brilliant -- except that for some reason I've never been able to "print" a Safari page -- as soon as I hit the command-P keystrokes in Safari, I immediately get a spinning beachball that will only go a way with a force-quit of Safari. This has always been true on this computer (MacBook Pro) -- not sure if it's a common bug or if it's just an eccentricity of my particular machine. Either way, that option is off the table because "printing" is impossible with my Safari.
I also searched around for various third-party freeware applications, and despite a lot of grandiose promises, none of them actually was able to capture an entire window including portions not currently visible on the screen.
I did find a commercial application called SnapWeb that does have the capability to do exactly what I want -- but it doesn't produce usable images in demo mode and requires $$$ to unlock and work properly, something I'm currently unwilling to pay for a simple one-use gimmick that simply must be part of the OS already.
So my question is:
Is there any native way within the 10.6 OS that allows users to capture an entire long Safari window as an image file (not as a Web Archive, but as an image file composed of pixels), which includes the entirety of a Web page no matter how "long" it is, even if it extends far below the visible screen footprint?
And if there is no native way in 10.6, if there a freeware/shareware application/widget/plugin/whatever which does the same thing?
I already know about a commercial software that does it (SnapWeb), so I don't need more recommendations for paid apps. And I know that I can laboriously construct a JPEG by hand with Photoshop by taking a screenshot of the visible window, scrolling down a little, taking another screenshot, etc. etc., and then
"stitching" them together. Yeah, it's possible (and in fact is what I've done in the past), but it's a time-consuming hassle that shouldn't be necessary.
Help! I've wondered about how to do this for years, and have never yet found a satisfactory answer.

Woo-hoo!
After fiddling with Paparazzi! for another 40 minutes, I finally deciphered (through trial-and-error) how to maneuver through its awkward user-interface to an extent that I was finally able to make it "work" -- at least work sufficiently for my purposes. And lo and behold, it does indeed have the capacity to capture a screenshot of an entire long Web page, including the portion not visible on the screen. In fact my first attempt was to experiment with this very page of our thread on Apple "Discussions" about how to solve this problem -- and I got Paparazzi! to save it as a jpeg!! The whole thread, top to bottom, exactly as on the screen, not re-formatted for printing. The final file size was 985 pixels wide by 4,204 pixels long (1.2mb).
I have since experimented with a couple other pages and had success with them as well.
HOWEVER, I can't guarantee that Paparazzi! will work with every page on the Web, because I think one of the problems when I first attempted to use it was that the page I was trying to get a screenshot of contained a lot of Flash elements and other data-heavy widgets, and I think those messed up Paparazzi!'s memory or overwhelmed it or something. But perhaps such huge and problematic pages are rare enough to not be much of an issue using Paparazzi! under normal circumstances.
So, I'll consider this problem "solved," and give user "jsd2" a "This helped me" star, since even though I already had Paparazzi! he encouraged me to revisit it.
And for the record to help those who might stumble on this thread in the future seeking a solution to the same problem:
The freeware program to get is called "Paparazzi!" and is available directly on the developers site here:
http://derailer.org/paparazzi/
Also, note that the current version only works with 10.6.8 or later, but if you have a previous version of the Mac OS, the developer helpfully maintains an archive of older releases that work with older OS versions -- you can access the old (and new) versions here:
http://derailer.org/paparazzi/downloads
It's also available for free download on various popular third-party sites, like:
http://www.macupdate.com/app/mac/15966/paparazzi!
Be warned that Paparazzi! does not have a very intuitive user interface, nor a user manual, so be patient with it and you should be able to figure out how to make it work.
If you want another application that also does the trick and which has a simpler and better user experience, but you don't mind paying money to buy it, you can purchase and download "SnapWeb" on its developer's site here:
http://www.tribalmedia.com/bts/snapweb/snapweb.html
And if anybody seeing this in the future knows whether or not there is a native way to capture entire Web pages built in to 10.6, please post the info here. Thanks!

How to make an entire word spin/rotate?

Similar Messages

Maybe you are looking for