How to make an image map rotate?

I have 4 images and how do i make them rotate with the image map part. Rotation removes the image mapping when it is done with Jquery. Help

Sudarshan Thiagarajan wrote:
The plug-in itself seems conky. http://blog.stableflow.com/jquery-plugins/360-degrees-product-view/ - doesn't do anything to the image on their plugin demo page.
If you could tell us what you'd like to do with your anatomy images, maybe we can suggest a different solution?
It rotates the image in my browser
I want to make the body turn around 360 degrees when mouse is used to rotate,mean while the image map should be clickable on all 4 sides .

Similar Messages

How to make an image flip, rotate...fly..anything?

It's me...the newbie again...under the gun!
I have some images (jpegs) in my movie and currently they just....."appear".
I would like them to appear in a more dramatic way...flip, rotate...fly like a bird...anything interesting and that goes with the music....any suggestions?
Using FCE HD 3.5
Thanks!

http://www.fcpbook.com/MotionControl_inFCE.html
You really need to get yourself some training materials for this application. It's going to be really hard using a forum.

How to make keynote images full screen?

Question: how to make keynote images full screen? I just noticed. after many successful full screen shows with Keynote 09 5.1.1 that I am no longer seeing the show full screen, at 1280, but only using the center part of my macbook pro 13 inch screen (which will mirror just like that on the projection screen, as far as I know). Did I hit a setting I do not know about to keep the images so small?
Thanks

Keynote > Preferences > Slideshow: Scale slides to fit display

How to make mirror image on officejet pro 8600

how to make mirror image on officejet pro 8600

Hi,
You can not make mirror images with printers but you can print mirror images on printers. This is how to print mirror images on a normal printer:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=bpu02032&lc=en&product=61561
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to make slide images with Dreamweaver CS6?

How to make slide images with Dreamweaver CS6? Please teach me.

Hello
in addition to Jon's hint, I'll send you some links to nice sliders (have fun with the different representations ):
http://sandbox.scriptiny.com/javascript-slideshow/
http://jquery.malsup.com/cycle/
http://wowslider.com/best-jquery-slider-crystal-linear-demo.html
http://www.jcoverflip.com/demo
http://www.jacksasylum.eu/ContentFlow/
http://addyosmani.com/blog/jqueryuicoverflow/
You only need to use the source code to implant these shows there where you want. In my eyes it would be the best that you use first a very new and blank DW file to perform (maybe in LiveView) the one or the other.
Hans-Günter

How to make sure the maps are loaded though nokia ...

Hi,
I have downloaded new nokia map v.3.0109 to my nokia E75 and loaded maps by using nokia map loader (Asia).
but still I cant see the all regional map which I downloaded, without usign live internet connection.
How to make sure the maps are loaded properly to my mobile ?
with regards
Moderator's note: Email address removed. It is not wise to publish your personal information on a public forum.
Message Edited by myn1126 on 27-Jan-2010 07:54 AM

Hi,
I have downloaded new nokia map v.3.0109 to my nokia E75 and loaded maps by using nokia map loader (Asia).
but still I cant see the all regional map which I downloaded, without usign live internet connection.
How to make sure the maps are loaded properly to my mobile ?
with regards
Moderator's note: Email address removed. It is not wise to publish your personal information on a public forum.
Message Edited by myn1126 on 27-Jan-2010 07:54 AM

How to make a still picture rotate around a vertical axis ?

H there,
Can I know how do I make a still picture rotate around a vertical axis ?
Thanks

Thanks MTD,
It is indeed one good trick ...
From your timeline, it seems that you applied a transition after each clip. Can I know why & what transition you applied ?
Can you please elaborate what you meant by "I changed the last keyframe in the last clip to a Smooth" ?
Thanks again ...
Cheers
Meg The Dog wrote:
Hi -
While Mr. Wolsky is absolutely correct that you need the other software to do the effect you describe correctly, I believe you can make an approximation of what you want using FCE. Whether or not it passes the smell test is up to you.
You can see a clip I made [HERE|http://www.spotsbeforeyoureyes.com/3DTurn_Example.mov]
Because when you rotate the frame 360 degrees using the Y-axis, the image always comes back to the same position - which gives you a handy place to match cut to the next implementation of the rotation at a slightly slower pace. The last rotation was smoothed to a stop by modifying the filter keyframe to "Smooth".
So (not acounting for the pad video at the head and tail of the clip, a 1 second clip, followed by a 2 second clip, followed by a 4 second clip to give me a 7 second move.
!http://www.spotsbeforeyoureyes.com/3dTurnTimeline.jpg!
I applied the filter to the first clip, and set it so that it went from -360 to 360 in Y axis rotation. I then copied that clip and used Command -V to apply the same effect to the next to clips via paste attributes, UNCHECKING the Scale Attribute Times so that the spinning would slow down as the clips lengthened.
Lastly, I changed the last keyframe in the last clip to a "Smooth" , and added head and tail trim to the entire effect so the bars would start static, spin and the end static.
Like I say, it's far from perfect but may either point you toward a solution or trigger ideas of your own.
MTD

How to make the images show up on a linked file in Muse?

I am wondering how to get my images to show up on the linked files in Muse. Basically, in Muse, I have a page that links to other pages I designed in Dreamweaver. I put the images in the image folder and when I upload the site, the page links to the Dreamweaver page ok but the images are missing. This is a vital part of the site. Any suggestions?

If you made the pages with Dreamweaver then they should be on your system some place and you could make a "dreamweaver" folder inside your Muse site and upload the pages to that folder using the upload files option... see this thread talks about sound files but almost any file can be imported to muse
I need a recommendation for a slick way to embed audio
Another option is to link across to an online resource using the built in muse html editor but that has pit falls because once you link yourself outside the site you also lose some control of the content;
For an example of this have a look at an old demo page I made http://chec-garry2.businesscatalyst.com/index.html
When you click on the Brahminy Kite bird you are looking at what used to be called an Iframe but the problem of control is highlighted when you click the Blue Wren and sometimes get pop up adds… I could import the Blue Wren page into my Muse site to fix this issue and in your case that’s a good option but I didn’t because I don’t have copyright over that pages contents and didn’t want to steal someone else’s work.
p.s. if you have got a demo of the website/ pages online someplace that would help us see your problem.

Does anyone know how to save / preserve image maps when updating graphics?

Hello all,
I'm currently working on a RH7 HTML project, which I've designed to be used in support of a software application.
Some of the application's dialogue boxes have quite complex multi-tabbed GUIs, so when it comes to describing their functionality, you often end up with a long list below the graphic image. What this means of course, is that the user is forever scrolling up and down to make reference between the GUI and the explanatory text.
I hit upon an idea I'd used previously, whereby I created popups to multiple image map hotspots. It works like a dream and the client and users really like the concept - but there's a snag (apparently).
Because the application is still in development. some of those GUIs are (and will continue to) change. No problem with that either - until I try and insert the updated graphic. Poof !! All my hotspots disappear . . .
Surely I'm not alone in trying this approach and there must be some way of preserving the hotspots?
Any suggestions?
Bob (in a UK time zone)

Hi there
It sounds like you are using the standard methods of inserting an image. Don't do that!
All you need to do in these cases is to use Windows Explorer to save the updated image using the same file name and replacing the former image. When you do this your other data will remain intact. If the new image is a different size, just right-click it inside the RoboHelp HTML editor and choose Reset Size. You also may need to tweak your hotspots if things shifted some.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

How to make an Image in Adobe Muse 100% height ?

100% width, it's ok; but I don't find how to make a 100% height image (wich follows my browser height)?
I work with adobe Muse CC 2014
thanks !

You can use the image as browser fill and then set the position of image such that it remains to its position. This can be used as a workaround for using image as browser height.
Thanks,
Sanjit

DVD burned on one G4 will not open up on another. How to make an image?

Hello,
This is a bit of a desperate problem, I have a dvd that was created of a 1.4 hour program and burned using iDVD3.0.1 on a G4 500 Mhz machine. Once the dvd is created I am able to play it on that computer using dvd player. I am running Tiger on that machine.
Once I take that dvd over to my G4 1GHz machine also running tiger, the machine will simply not accept the dvd and keep ejecting the dvd; dvd player does not even open up in order for me to look at the video.
The main purpose of me having to look at the dvd on the G4 1Ghz machine is to copy the dvd. Can you also briefly describe how to make a copy of a video dvd created using iDVD? I believe I have to make an image first. I cannot remember how to do that, please help. Once the image is made how do I copy that image onto a fresh dvd?
Thanks,
Vidur

Hi Vidor
first:
I use DVD-R disks
And Verbatim brand
second
iDVD 3.xx doesn't create Disk Images. Neither does iDVD 4
(if iDVD prior HD/5 You have to add a hack to make this possibly
named HPfurz and install it)
Works on iDVD 4 - for iDVD 3 I don't know.
Test this with Apple DVD-player - OK then burn it with iDVD
or Toast if You have and don’t want to re-code the movie.
third
To make a DVD copy You need
- a NON copy protected DVD
- a program that can make it into a Disk Image eg. Roxio Toast™ (costs)
- a new blanc DVD-R disk
If Apple Disk Util tool - can make a disk image is out of my knowledg.
Yours Bengt W

How to make an image clickable region?

Hi
Please see the image below, in particular I have a seperate layer READ MORE, I want to save this image as a PNG file and in my HTML page make the READ MORE region like a clickable button. I know I can slice this into a seperate image and wrap in a <DIV tag to do this, but any other ideas please ?

Google for "HTML image map" for way too many tutorials. Image maps are typically taught before DIVs.

How to make background image scalable

I am working on my site and I am constructing it using only
external CSS. I am looking for a different look than I have
previously done and want to use an actual image for the back ground
of one of the DIV containers rather than just a color. My problem
has been since I want my site to be fluid I need to find a way to
have the image scale with the container. I could have sworn I saw
how to change this attribute during some online reading I had done
but I can not find it. Can anyone here help?
Dara

Scaling images is usually a bad thing - they will lose both
aspect ratio and
image quality when you do.
However, if you are willing to suffer these indignities, you
can place an
image into a div that is 100% height/width (of whatever the
<div> tag's
contaner is), and make the image 100% height/width as well.
Depending on
the layout, that could accomplish your goals.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Dara_BSI" <[email protected]> wrote in
message
news:f4vm0n$kei$[email protected]..
>I am working on my site and I am constructing it using
only external CSS. I
>am
> looking for a different look than I have previously done
and want to use
> an
> actual image for the back ground of one of the DIV
containers rather than
> just
> a color. My problem has been since I want my site to be
fluid I need to
> find a
> way to have the image scale with the container. I could
have sworn I saw
> how to
> change this attribute during some online reading I had
done but I can not
> find
> it. Can anyone here help?
>
> Dara
>

How to make background image editable in a template

I have built a template and would like to make the background
image editable, but not the rest of the settings in the body style.
(I'm not sure of my terminology yet.) The background image is
currently set in the locked part of the page. I've tried to insert
an editable region in the html code, as I cannot get to the
background image by clicking on it or selecting on the Design page.
But I am not allowed to change the code in this way.
What is the best way to do this? I'm not sure how to make a
div of this one setting. Or even if that is what is needed.
Thanks for any suggestions.

So to give a different background image to different pages using CSS.
Create a CSS file in your Dreamweaver site.
Link it to your pages.(in your head tag like so: <link href="path/to/stylesheet.css" rel="stylesheet" type="text/css" />)
In your HTML code find the body tag and give it an id (like so: <body id="myUniqueID">)
In your stylesheet write the following code:
#myUniqueID{
background: #color, url("path/to/image.jpeg") repeat);
And now extrapolate the above steps and code to your other pages and voila, you now have different background images for your different pages.
To learn more about CSS - visit your local web search engine.
To see the power of CSS, check out http://csszengarden.com/ where the exact same HTML file is styled by different CSS stylesheets.

How to export an image map as polygons?

Hoping someone can help with this as im having no luck with google.
I have a shape and in the attributes i have set the image map as polygon and put in a url
I export this in jpg format and it generates a jpg and html file. however, the HTML file is only showing rectangle.
<area shape="rect" coords="70,85,278,282" href="http://www.example.com">
I would have expected this choosing rectangle for the image map.
I am trying to export polygon coordinates.
Does any one know why this is not working and what i have missed?
Thanks in Advance

This was posted before and I tried it myself but when I exported the polygon shape image map it exported properly.
In the attributes you must choose polygon as the option it is not good enough just to have the shape a polygon.
Perhaps the problem might be connected to the document color space was the document the default CMYK or was it a we document from the start?
But what I always do is make a slice of the art or the artboard and save for the web as a jpeg and include the html.
You can check it out here http://mysite.verizon.net/wzphoto/Polygon.html
Here are the screen shots of what I did

How to make an image map rotate?

Similar Messages

Maybe you are looking for