How to make an notification as FYI notification
Hi all ,
I want to create an FYI notification , i am unable to do that . please help.
Thanks
Hi,
You just need to create a notification which does not have a result type associated with it. That's the only difference between a notification that requires a response and one that does not.
HTH,
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://thoughts.workflowfaq.com ?
WorkflowFAQ support forum: http://forum.workflowfaq.com
Similar Messages
-
How to make WBS element field in Notification a mandatory.
How to make WBS element field in Notification a mandatory.
Should I use USer Exit.
In cutomization I didnt find ant standard customizationHi,
If it is about WBS element field in Maintenance Order then check up user exit ;- IWO10009 PM Order: Customer Check for 'Save' Event
For Notification i am not sure whether this field is ther , but anything u can perform checkings via
QQMA0014 QM/PM/SM: Checks before saving a notification
Alternatively u can also explore via Transaction variant SHD0 ..
regards
pushpa -
How to make weather shown in the notification bar
I'm running IOS5 on ipad2.
Can weather be shown in the notification bar ?
If yes, how do I do it?Jakosaur wrote:
Go to Settings>Notifications>Weather Widget and turn it on.
From the Terms of Use:
Test your answer. When possible, make sure your Submission works on your own computer before you post it. -
How to make weather widget appear in Notification Center?
I've set up various apps for notification center. I can now see notificatoins for emails, etc. that come in after my iphone is locked. however, how or where do the weather and stock widgets show? They are turned on, but not showing on the lock screen. what am i missing? I have a 3gs.
You will not see them on the lock screen. Only on the notification screen (swipe down from the top AFTER unlocking the phone).
-
How to make vibration longer in notification zone
Hi,
Please help me of how to make a longer vibration for notification on iphone. It seems too short for me to notice. Thank you.you can't.
-
Hi Consultants.
Does anyone know how to stop the canceling the FYI notification after a atual notification had timed out?
We have reuirement to send FYI notification after timeout the remider approval notification.
i addeed FYI notification but when i tested the Workflow FYI notification is sending and it is autoclosed after reminder notification got timeout.
Please advice me.
Thanks,
Ashokwe just need to put all activity revisit as Loop
-
How to create custom FYI Notification in the iRecruitment Notification Approvals Transaction type
Dear All,
Does anyone know how to create a custom FYI Notification using the Notification Apporval Transaction type??
my requirement is when the Candidate complete filling his personal information and upload required document, a notification should be sent to the recruiter informing that all documents have been uploaded.
Can anyone tell me how to do that?
Thanks
RegardsHi,
Please see this thread.
Want to send public message to all oracle apps users while instance up
Re: Want to send public message to all oracle apps users while instance up
Also, see these docs/links.
Managing Downtime in Restricted Mode from OAM [ID 364236.1]
R12 Enabling Applications Maintenance Mode and Preventing User Access [ID 557964.1]
Downtime and Apache Restricted Mode in Release 12
http://blogs.oracle.com/stevenChan/2008/03/downtime_and_apache_restricted_1.html
Thanks,
Hussein -
How to make Rule to get notification for Shared Mailbox on Outlook 2013
Hi All, is anyone have idea how to make rule on Outlook 2013 to get notify if you receive new email from your "Shared Mailbox".
Is it possible that make a Rule for that notification? I have outlook here and I can't see notification when I receive new emails. Hope anyone can help me how to do this.Assuming the mailbox is open in outlook as a shared mailbox, you can use a macro to watch the folder:
Private WithEvents Items As Outlook.Items
Private Sub Application_Startup()
Dim Ns As Outlook.NameSpace
Set Ns = Application.GetNamespace("MAPI")
Set Items = GetFolderPath("Accounting\Inbox").Items
End Sub
Private Sub Items_ItemAdd(ByVal Item As Object)
On Error Resume Next
MsgBox "new message from " & Item.SenderName & " in shared folder"
End Sub
Diane Poremsky [MVP - Outlook]
Outlook & Exchange Solutions Center
Outlook Tips
Subscribe to Exchange Messaging Outlook weekly newsletter -
How to Close the FYI notifications Automatically
Hi,
I have a requirement, where my manager getting so many FYI notifications daily. It is not possible to check all those notifications.He wants to close all the notifications automatically. By doing this he wants to disappear all those notifications under Open notifications.
Help is appreciated
Thanks,
Ram.Hi Gurus,
Add to my previous note:->
I read some where in metalink that, we need to set AUTOCLOSE_FYI parameter to Y.
Is this right? If yes, where we need to set this parameter
is there any step to other than this.
Help is Appreciated.
Thanks,
Ram. -
How to add (FYI Notification) After the last approver?
Hi All,
I want to add FYI notification after the last approver action, for example after the absence leave confirmation I need the supervisor to be notified that his employee has an approved vacation with the details.....
RegardsHi Ayaz,
The Allow FYI Notification is a parameter provided by Oracle. Also we have standard Transaction Types defined by Oracle.
By default the Allow FYI Notification is set to No at all levels. To enable the FYI Notification for a particular transaction type (say Self Service) , we need to enable this at the transaction type level.
Once you set the value for Allow FYI Notification 'Yes' at transaction type level; when you would create a rule, you will get a option to select 'FYI Notification' or 'Approver' at Rule level.
Note: The FYI notification will not display the entire contents of the Transaction. It will just display the subject line.
Regards,
Murtuza K. -
Now, requester enters a requisition and the Buyer autocreates this requisition to a Standard Purchase Order and approves it. When approving the PO, Buyer communicates document by transmitting it to his or her email. This way, the approved document can be forwarded to the Supplier from her mailbox.
Often, the requester and Buyer are one and the same. Then, Buyer gets two notifications – one sent by Oracle automatically and the second with PO in it.
The company and its Procurement group find the 1st FYI notification unnecessary. Oracle already informs the requester when his purchasing request is approved and this is enough and sufficient. The automated messages to subsequent approvers should be stopped.
Just looking for your thoughts on how to get this done.
Thanks,
SanjibPl post details of OS, database and EBS versions.
Pl see if these MOS Docs can help
How to suppress FYI email notifications? [Document 561752.1]
How Not To Receive FYI Notifications in Workflow Cartridge [Document 281889.1]
11.5.10 How to Automatically Close Specific FYI Notifications For A Buyer? [Document 393572.1]
HTH
Srini -
Rename ok button from FYI notification in oracle workflow.
Hi All,
In Oracle workflow the Client want to rename the OK button in FYI Notification. Is it feasible? If yes then how to do this.
Please help.
Regards,
Uday
Edited by: 823973 on May 10, 2013 12:03 AMDear Pradeep,
Thanks for your reply.
If we use normal workflow button the user has to reply the answer with an email to notification mail server.We want to achieve the confirmation message with just a click of button.
We are looking for all possible aspects to achieve the desired functionality.
Regards,
Rajesh -
Need to send FYI Notification - Oracle Applications
Hi,
I need to send FYI notification upon completion of one concurrent program of PL/SQL procedure type. Can I use WF_NOTIFICATION.SEND method? Alreay I have one custome FYI message defined in WF_MESSAGE table. I am new to workflow and dont want to touch or create the workflows....Any help?
ThangsDear All,
I am facing problem regarding completion notifications in Oraclr r12, when user click the upon completion generated notifications it can only be viewd once, second time user cannot view the notifications.
I have find that fnd_file_temp table store this information and deleted it.
Plz help me how to view this URL again.
thanks
regards,
Zubyr -
FYI Notification in EIT Workflow Process
Hello,
I have created a EIT and added to Employee Self Service. Employee will use this EIT to store the Coaching Feedback.Now this feedback should go as FYI Notification to Manager , this should be just FYI and no approval is needed.
I configured the AME Rule Category as 'For Your Information'. Now the FYI is going to Manager correctly. However FYI Notification don't have employee coaching feedback . So how can i send FYI Notification to Manager with feedback detail.
Please advise!
Thanks
GauravHi,
This feature is only available from 12.1.3. You need to add parameter pNtfFyiDetails=Y to the respective function.
Please review note 1355465.1 for more details.
Regards,
Anish -
FYI Notification after final approval using AME
Hi,
We have a requirement where we need to send a FYI notification to a group of people after final approval. Could you please guide if it can be done with the help of AME or not.
If yes can you please tell me the detail steps.
Regards,
Rakesh.Hi Rakesh,
- you can create another rule in AME with the same conditions as your main rule.
- Make sure the rule type is For Your Information.
- Create approval groups for the people you want to send the FYI notification to and add these approval groups to the rule (using Post Approval as action type)
- Make sure the order number of your new approval group is higher than the order number of the approval groups in your main rule. This will ensure that the FYI notification goes in the end and not somewhere in the middle.
Thanks
Shailendra
Maybe you are looking for
-
ASA 5505 - 2 Internet Connections, Problems with the Default Route
Hey there, i have a Problem at a Customer Site at the moment. The customer uses an ASA 5505 with two internet connections attached to it. On the first connection (which is the only one in use at the moment) he has some Static-PAT's from Outside to In
-
I have an iPod Classic 80GB from a few years ago. and everything works well besides i cannot sync it or see my music that was on it before it started to have issues. I can still scroll throught the menus, so it is not the OS, but i cannot see my musi
-
Exit Button in Travel Assistant - Area does not exist message
My client is on EHP2 for SAP NW 7.0 SP15 & EHP5 for SAP ERP 6.0 SP12. I believe the portal is also in the process of being upgraded from 7.01 to 7.4 (although the issue I am having occurs in both new and old portal systems). The Homepage Framework wa
-
System out of memory when exporting/migrating Solution Manager
Dear all, since we decided to migrate our Solution Manager (win2003/sql server 2005) system to a more appropriate server, we started an export using the NW70sr2 installation master CD, the one we used to install this solution manager instance. Everyt
-
Essbase 9316 and EAS 9315 compatible with planning 931?
Hi there, does anyone knows if Planning 931 is compatible with Essbase 9316 and EAS 9315 ? There seems to some changes with essbase.sec