How to make an untwisted camera profile available in LR 4.4?

I have downloaded dcpTool from http://dcptool.sourceforge.net and generated the untwisted versions of all the Nikon D700 related camera profiles (Adobe Standard, Camera Standard, etc.) that come with LR 4.4. Since the structure of the camera profile filenames seem to be important, for each file I kept the original name but added a distinction to its end (e.g. Nikon D700 Camera Standard UT.dcp).
According to the information I have collected, 'installation' of these profile versions would be as easy as copying them into the same directories where the original profiles are. Unfortunately LR 4.4 does not bring them up in the Camera Calibration module.
How should I 'install' these profiles?

Thanks again for your very useful advice. You gently explain why my idea is groundless. You are right, it is better to stay on ground.
I changed to LR recently. So far I have used only the Adobe Standard profile, but I am not very pleased with it. A few days ago I started fiddling with other D700 profiles, without any convincing color rendering improvement. This is the reason for entering the camera profiling world.
As my username reflects, I am a hobbyshooter. Most of my pictures are taken when travelling (landscapes and cityscapes) but I also shoot at family events and parties.
You have made me even more curious about the ColorChacker based profiles. I hope they will solve my main problems: skin color, the vivid reds of Nikon, and the formerly mentioned hue twist. Nevertheless, I am afraid that finding the right color rendering balance for my typical environments (particularly for indors with totally mixed lighting) will not be easy...
I am also thinking of reprocessing roughly two thousand pictures, taken years ago with D200 and D300. Do you have any suggestion how to get nice 'generic' profiles for the given camera+lens combos, which I do not have these days, so creating their profiles with ColorChecker is out of the question for me?

Similar Messages

How can i create a camera profile with camera raw?

Hi
how can i create a camera profile with camera raw without x-rite or other third software?
i have a Colour Checker ,with different shade of gray and different colors
i remember about a script or something like that
i google a lot , but without luck
can i create my camera raw profile using a color checker with photoshop acr ?
i'm not sure but this should be the script http://simon.tindemans.eu/tools/acrcalibrator , right?
but i don't know how use it
is there a tutorial ? maybe a video to create a profile with camera raw
thanks
greetings

Hello, I think that you search for https://www.adobe.com/cfusion/entitlement/index.cfm?e=labs%5Fdngprofileeditor
Here is a PDF from adobe about it: http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/products/photoshop/pdfs/cs6/ DNGProfile_EditorDocumentation.pdf
And an article: http://www.luminous-landscape.com/reviews/accessories/dng-profiles.shtml

How do I install a camera profile into CS2 raw converter

I recently purchased a ColorChecker Passport and along with the software, created a camera profile for my Olympus E-300. The CCP software crated a camera profile that was duly placed into the c:\users\<username>\AppData\Roaming\adobe\cameraraw\cameraprofile\olumpus e-300 Directory. When I open an olympus ORF raw file from cs2 or bridge, and select the calibrate tab the only thing that is available in the camera calibrate box is ACR 2.4. Clicking the drop down arrow doesn't show anything else.
I have turned off colormanagement in photoshop.
Can anybody tell me how I can get photo shop to recognize the new camera profile?
I have tried restarting photoshop and Bridge after the DCp file was added to teh directory.
ACR verssion 3.7(?)
OS is windows home 64
8 gigs of ram
Photoshop cs2 version 9.0.1
adobe bridge cs2 version 1.0.4.6
I have also performed the same tasks on photoshop cs3 on my work computer with the same results.

The earliest version of Camera Raw to use DNG Profiles was version 4.6 in Photoshop CS3...so, you won't be able to use that DNG profile in ACR 3.7.

How to make custom icc color profile work as default for all users?

Hi!
I've calibrated two monitors for the machine running Mavericks OS X. I've managed to move these custom icc color profiles to ColorSync folder in HDD Library, so that that they are available for all the users. However, I cannot figure out how to make these icc profiles work as default profiles for all users and not only the one I used to calibrate monitors.
Is there a specific place I have to put custom icc profile to make it system default?
Thank you!

If you put the profiles in the root /Library/ColorSync/Profiles/ folder, then each user needs to select them in their account. There isn't a way to apply them globally so each account automatically comes up that way.

How to make BI 7.0 workbook available in analyzer

Hello,
I need your help on this: Basis transported my workbook including its role from 3.5 prod system to 7.0 prod system(due to our upgrade from 3.5 to 7.0).
I am able to see my workbook in the transport connection in 7.0 but it is not in the analyzer at all.
Please can you tell me how to make my workbook available in the analyzer?
Thanks.
Cesar

Hi,
Every month end I copy my workbook from the previous month to the new month. We just upgrade our system and when Basis copied 3.5 system to 7.0 i was working on period 3. In system 7.0 I can see my period 3 workbook. Now Basis transported my period 4 from 3.5 into 7.0 including its role. I canno see it even when I try to search it. I can see it in the transport connection but not analyzer. Any idea?

How can I create a camera profile in LR4 from my camera

I have a 5d mark 2, and I created a custom camera profile that is ideal for me, however when I shoot raw it only gives me the adobe, and camera standards etc. Is there a way that I can take my user setting on my 5d and transfer it into lightroom??

The camera profiles are only applied to the in-camera JPGs, never to the Raw files.
This is not only so for your Canon but for every camera that shoots Raw.
For creating a camera profile in Lr, see here:
http://help.adobe.com/en_US/lightroom/using/WS939594D8-4279-41b4-B8E9-B06BC919EC7C.html
http://forums.adobe.com/message/4939724
http://dpbestflow.org/color/camera-profiling

How to make files stored in APEX available to non-APEX user?

Our application generates a number of files that are stored within apex_application_files.
Some of these are to be made available to a non-APEX application. We intended to do this through a granting access to a view to the non-APEX schema.
In order to access apex_application_files you need to set-up workspace security, etc. This can be done (details are in this forum), but relies on querying apex_applications - this view filters the applications using 'USER'. Therefore, it will only return applications where the parsing schema matches the user making the query.
So... how can we make some files available to the non-APEX schema?

If making serious use of file storage in the database then the best approach would be to store the files in application tables rather than relying on apex_application_files. This gives you total control over security, storage, associated metadata and so on.

How to make a digital camera appear as a connected drive

How do I make a connected digital camera appear as a drive on the desktop instead of opening iPhoto?
Thanks!

Depends on what camera you have - to stop iPhoto form launching go to the iPhoto preferences and set action when a camera is connected to do nothing
Some cameras mount to the desktop and some do not - for example few if any Cannon cameras mount - most Sony do - depends on the manufacture and how they implemented things
LN

How To Make Call Live Cam On Iphone

my friend he has iphone , when he make a call to his wife i see in his phone showing live picture or cam showing his wife on it , how to do that
anyone know
thanks

ok , i got it now
so only photo highlight
i though it was showing like live cam talk

How to make Federated Portal Network Content available in a Consumer Portal

Hello Experts,
we have the following situation:
We have two NW 7.0 Portals: 1 Main Portal on and 1 BI-Portal
We would like to do a remote role assignment via the Federated Portal option in the Portal, so that we can make the BEX-Explorer role from the BI Portal available in our main Portal.
I've already created a connection to the BI-Portal (Producer-Portal) in "Federated Portal" and have already registered the main portal as the Consumer in the BI Portal. I used SAP Help for that:
http://help.sap.com/saphelp_nw04s/helpdata/en/67/7e70424edcc553e10000000a1550b0/frameset.htm
Now I have the problem, that I can not find the remote role from the BI Portal in the Identity Management of our main Portal? Does anybody has a idea (or maybe a solution ) how to fix this problem? The SAP Help is not very helpful, it always deals with the same notes...
Regards
Andreas
PS: Of course u can earn points!!!!

Hi
first of all i would check that the SSO is working between the two portals..
Log into one of the portal.. Change the URL to the other portal. If you have to log in, then there is a problem with your SSO. Remember to have enough permission on both the portal.
If that works, then log into the consumer portal and check what you find in the portal content of the producer portal.
Let me know the result, and I will help you further..
Best Regards
Kristoffer Engh

How to make more hard disc space available

Working in iMovie, I ran out of hard disk space so I cleared Trash and moved everything that was not essential for the task in hand onto a memory stick, including most applications such as iWork. However, no matter what I removed or cleared I was unable to recover half the 55GB nominally available on the McIntosh HD. What will be tying up the 25+GB of the nominal 55GB available and can I free it up?

actually most of the data is in the iMovie event, not the project. The project is small until you "Share" and then it contains a copy of the QT movie, that you can only see if you right click (control click) the project and "show package contents". you can toss those Qt movies (you can always make them again) if you want and they are there.
If you are sure you will never want the unused parts of the clips (stored in iMovie events) again, go to "move event to trash" and you will be prompted to delete
"delete unused" or delete entire clip. If you delete unused it will take a while to process, but will then trash every clip that you didnt use and any part of any clip you did use , keeping just that parts of the clips you used in your project. Then you will have to get them to the trash through the events browser window, then empty the trash. The other way is to choose "space saver" and that will toss (for all your events, not just the one you highlight) any clips not used, leaving the clips you do use alone, a safer way to free up space, but wont free up as much space.
roger

How to make changes in Authorization profile?

Dear Guru's
In R/3 4.7 i used to change authorization profile in tcode SU02.where as in ecc 6.0 i dont find any change option it shows "Generated profile can only be displayed"
I want to remove the particular tcode from that authorization profile.please help.
Regards
AKI

Aki
In new SAP versions, they have replaced direct profile generation with Roles concept and all the new profiles are attached to the roles. Follow this link and read it completely and understand the concept.
http://help.sap.com/saphelp_bw21c/helpdata/en/52/6714b6439b11d1896f0000e8322d00/content.htm
You cannot change a profile directly, instead you will have to insert authorization from the existing profile into a new role and generate a new profile for that role.
Goto PFCG, create some new Z role. Save it, then goto authorizations tab, in the profile text box enter the profile name you want to edit authorization of. Goto change authorization Data. make the required changes. Then in the menu on top left hand side you will see a red and white ball press that and generate profile. Now you have a new role with required authorization. You can attach the role to required users.
Rahul

How to make a circular camera path

Hi All,
If I use Orbit Camera Tool, it creates a linear camera trajectory. How can I create a circular one? I need camera to move around an object smoothly, but not as a series of linear paths.
I could add vertices to a path and edit it manually, but, probably, there is a simpler way of doing that.
Please advise.
thanks!

Maltaannon has a great tutorial on building a camera rig to achieve this with ease - and a script to automate it if you want to speed things up for a price.

JMS: how to make child class loader (classes) available to parent loader

Hi,
Environment: oc4j 10.1.3.1 on SunOS 5.10
Our application (set up in an instance other than "home") sets up a JMS receiver, everything works fine to the point where the receiver receives the message but the message deserialization fails with the below error. Looks like the deserializer (loaded by the parent classloader sytem.root) is not able to load the class from its child code-source (one of my application libraries in WEB-INF/lib) I have seen a lot of documentation on how libraries can be shared between applications, but I haven't come across any that is related to my problem here. I have even tried adding the library in question to bootclasspath that did not help either.
How to get around this problem.
Thanks in advance.
Caused by: java.io.InvalidClassException: toSerializable
at com.evermind.server.jms.JMSUtils.toSerializable(JMSUtils.java:1374)
at com.evermind.server.jms.JMSUtils.toSerializable(JMSUtils.java:1395)
at com.evermind.server.jms.EvermindObjectMessage.getObject(EvermindObjectMessage.java:114)
... 4 more
Caused by: oracle.classloader.util.AnnotatedClassNotFoundException:
Missing class: com.deploy.atao.message.client.Message
Dependent class: com.evermind.io.ClassLoaderObjectInputStream
Loader: oc4j:10.1.3
Code-Source: /export/home/oracle10as/product/10.1.3.1/OracleAS_3/j2ee/home/lib/oc4j-internal.jar
Configuration: <code-source> in META-INF/boot.xml in /export/home/oracle10as/product/10.1.3.1/OracleAS_3/j2ee/
home/oc4j.jar
This load was initiated at system.root:0.0.0 using the Class.forName() method.
The missing class is available from the following locations:
......( WEB-INF/lib/ directory in /export/home/oracle10as/product/10.1.3.1/OracleAS_3/j2ee/CI11TRY2/ap
plications/dev/ci/WEB-INF/lib)
This code-source is available in loader dev.web.ci:0.0.0. This is a child of the dependent loader system.root:0.0.0.
at oracle.classloader.PolicyClassLoader.handleClassNotFound(PolicyClassLoader.java:2078)
at oracle.classloader.PolicyClassLoader.internalLoadClass(PolicyClassLoader.java:1679)
at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1635)
at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1620)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:219)
at com.evermind.server.ApplicationContextClassLoader.findClass(ApplicationContextClassLoader.java:23)
at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:219)
at com.evermind.io.ClassLoaderObjectInputStream.resolveClass(ClassLoaderObjectInputStream.java:33)
at java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1513)
at java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:1435)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1626)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1274)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:322)
at com.evermind.server.jms.JMSUtils.toSerializable(JMSUtils.java:1364)
... 6 more

Resolved by adding the application library in question to config/application.xml as <library path="<relative path to the library>"/> so the library has instance scope is accessible by the sytem.root loader.

How to make the iPad camera accessible in a Microsoft Terminal Server Virtual Desktop?

We have a Microsoft Terminal Server farm which we're using to host virtual desktops. We can connect to it and use it fine for most of our purposes using any of the standard RDP clients out there but none of them appear to enable us to access the iPad camera (either) from within the virtual desktop on the terminal server e.g. passthrough via a virtual channel. Audio - check, printers - check,.. camera: not so much.... Anyone have any tips / experience setting this up or is this just technically not possible with the setup we've got?

Oh, my god! I'm so embarrassed that I couldn't figure this out myself, after being a devoted Mac user for three decades! It's so obvious! Thank you so much!

How to make an untwisted camera profile available in LR 4.4?

Similar Messages

Maybe you are looking for