How to Make Assignment field in Details Tab Mandatory in MIRO

Hi Experts,
I would like to know how to make the field "assignment" in Details tab of transaction MIRO as a Mandatory field, Give all the posible ways and their causes and effects.
Thanks In advance.

Hi,
check the field statusgroup of the reconcilation account for your vendors and change thisfield status group for the field Assinment to Mandatory.
But make sure that then all your endors haven an sort key in the master data.
Regards,

Similar Messages

Need to make Assignment field in Cash Journal mandatory

Hi friends
I have a requirement to make the assignment field as mandatory in the Cash Journal for a particular G/L. So accordingly, i changed the Field Status for that particular G/L as mandatory in the Field Status Group. But now when i am entering the transaction in FBCJ, it is not prompting me to enter the assignment field. Strangely, when i try the same thing with F-02 with the same G/L, it shows the Assignment field as mandatory.
I checked the field name of the assignment field and it was ZUONR. However, in FBCJ, the name shows as ALLOC_NMBR. Please tell me where i am going wrong.
Thxs in advance

Hi
On FBCJ screen, even though the field is set to mandatory in field status, "?" mark doesn't appear, but if the field is not filled, the system should issue an error message and the document doesn't get posted to FI. You can use screen variant to set the field mandatory on FBCJ screen.
See note 546365.
Regards, Kyoko

How to make the fields of the table mandatory while creating new entries..?

Hi,
I have created a new Z table which has 6 fields. All the 6 fields are KEY fields and all are of CHAR type. I have generated the table maintenance generator for the same. My requirement is all the fields should be MANDATORY while creating the entries. No field should be BLANK.
When creating the new entries in the table, even if I don't give any values to some of the fields, it is saving the entry. But, it shouldn't happen like that. If any of the field is kept blank, it should not allow the user to save the entry. Can someone tell me how to approach this. Will there be any settings while creating the table which takes care of this.
I read somewhere that this can be done using the Table EVENTS. Can someone tell me what is the code that we should write there in the Events which prevents the user from saving the blank fields. While writing the logic in the events, how to check whether the particular field is BLANK or not. Will the values be stored in any internal table kind of thing..?
My table name is ZCRF_TAB and the fields are FLD!, FLD2, FLD3, FLD4, FLD5 & FLD6. Can someone provide me sample code for my requirement. Thanks in advance.
Best regards,
Paddu.

Hi,I think u have generated Table Maintainance Generator, goto Environment->Modifications->Events
Select appropriate option by using F4,I think value 05 is appropriate for u r requirement.Enter From routine name.Dbl click on the routine.
Write the appropriate code like:
If ZTABLE-FIELD1 is initial.
Message (E000) with "Fill all the manadatory fields".
Thats it.Just look at the following docu with screenshots,by this understand how u can use Table Events:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/abap/how%20to%20implement%20events%20in%20table%20maintenance.doc
Regards,
Rock.

How to make a field in sales order a required field

Hi,
How do i make a certain field in sales order a required field. I want to make the assignment field in accounting tab a required field. How do i configure this.
Thank you.
Rachelle

In you know the Transaction and screen Variant Configurations.
Use T-code SHD0
Put your Sales Order t-code There : Va01
Then Select the feilds or tabs whatever you want as mandatory , optional.
Customize as per your requirement and save the variant.
Next GO to the Sales Document types :
There In the Transaction flow you will find at variant feild.
Assign this variant there.
Next when ever you do sales Order for that Document type the feilds will be taken in the fashion of the variant.
regards,
SAP SD

How to make a field Mandatory in a Table view?

How to make a field Mandatory in a Table view?
The requirement is, the user should not be able to append a new Row, unless and untill he enteres the data in the column SOLD-TO. Now how do i acheive making this field madatory. Normally in Edit form view, we can go in customizing and flag Mandatory, for table view we don't have this option.
Please can anyone of you guide me in this approach?
Jagadish.G

Hi Jagadish,
have a look in this thread, part of the code you can use in eh_insert method or logic to write enable/disable insert button.
Re: Assignment Block Mandatory
regards
Ismail
Edited by: Ismail Shaik on Oct 21, 2009 11:36 AM

How to make a field required in OAFramework

How to make a field required in OAFramework at runtime?? Please explain in detail if possible.
Thanks
Kumar

Get the handle of the bean using the following Code
<BeanType> bean = <BeanType>webBean.findIndexedChildRecursive("<Id of bean>");
if(bean!=null && <condition>)
bean.setRequired(true);
}

How to make a field profit center mandatory in sales order?

Dear GURUS,
Please help in getting answer for following question.
How to make a field profit center mandatory in sales order?
With Regards
Sandeep D.

Hi,
There are 2 ways to make profit center mandatory
1.Transaction Variant
2.Incompletion procedure
1.Transaction Variant
Step 1:Goto Tcode shd0 and input transaction as va01 and give name of transaction variant as ( example. zva01 ) and click on create or F5
Step 2.Then it takes you to sales order screen.Just click on enter untill you see profit center field.
Step 3.check the box required against profit center.
Step 4.click on save ( under a package name or as local object ) and exit
Step 5.Assign transaction variant to your sales order type through tcode v0v8.
2.Incompletion Procedure
You can add the field table-vbap,field- prctr,status-04,check-warning to your existing incompletion procedure Tcode- ova2 assigned to your order type in tcode vov8 and check the box - incomplete messeges for your order type through tcode vov8.
If incompletion procedure is not assigned to your order type than you have to create a new incompletion procedure and assign it to order type.

How to make a field un editable in one screen

Dear Experts,
I want to know how to make one field as un editable in one screen.I will explain in detail. I want to make "Reconciliation account" field as un editable in XD02 t-code.
Regards,
Surendra babu.

Hi Surendra,
Use this path in spro:
Financial Accounting-> A/P&A/R-> CustomerAccounts->MasterData->Preparatons for CreatingCustomerMasterData
use the transactions & u can update for creation of customer master or hange of customer master.
Hope this helps you
Award points if helpful
chaitanya

How to make a field in adobe form noneditable

how to make a field in adobe form noneditable. like info keys..
when this form is sent through worflow the receiver shudnt be able make changes to the field value...(I have a form, which has fields prefilled(like pernr employee name) but these fields are in editable able..(i want only some fields to be uneditable not all)
Edited by: kumar gaurav on Apr 11, 2008 8:04 AM

Hi,
You can make fields non-editable at runtime using this code:
field.access = "readOnly"
Hope this helps.
Amit

How to make a field mandatory in billing

How to make a field mandatory in billing document,if m right with the help of incomplition log but how.....
plz reply the full configuration.

Hi Mohan,
We normally create a billing document with reference any other document say Order or delivery.
so, all the necessary information in the invoice will be taken from preceeding doucments. Thats way in the order level we check for incompletion log. If any important data is missing in the order level then the succeding documents will not be created.
Thats way in the billing documents all the necessary information will come automatically either from preceeding documents or from master data.
Still you want to make any field mandatory, you can do these by modifieing Billing documents user exists,you can make which ever the fields are mandatory and to be checked before saving. so when you are going to save the invoice, it will check if these fields are maintained or not.
Hope this is clear.
Reward if helpful.
Thanks,
Praveen

How to make all fields mandatory in sales order T- code VA01 initial screen

Dear all,
how to make all fields mandatory in sales order T- code VA01 initial screen itself
The fields are
Sales Organization
Distribution Channel
Division
Sales Office
Sales Group
Regards,
Amar Reddy

Hi,
You can use Transaction Variant to achieve this functionality.Please go through the following link which helps you in creating the same.
[Link|http://wiki.sdn.sap.com/wiki/display/Snippets/TransactionVariant-AStepbyStepGuidefor+Creation]
Regards,
Phani Prasad

How to make warehouse field inactive for all users in all documents autom.

Hi All,
Can anyone pls tell me "**how to make warehouse field inactive for all users in all documents without having to do it through form setting** "for each and every user. It should be visible but inactive
Thanks & Regards,
Mukesh Agrawal

Hi,
As a work around create a warehouse SelectWH and map the mandatory acoounts as a On hold account(in chart of accounts).So there will not be any posting on this account.
And set this warehouse as default warehouse for all users.
So without selecting the appropriate warehouse the user can not add the document.
I think this might resolve you issue.

How to make expandable field in pdf forms?

Does anyone here know how to make expandable field in a PDF form?
I want the field, originally appear to be a 1-liner, to expands when you put in more text and everything that is underneath the expandable field shifts or moves down.
pls help.
Thanks!

No, LiveCycle Designer is not included in Creative Cloud and is available only for Windows. It was included with the Windows version of Acrobat Pro before Acrobat 11 but is now a separate program and about $300.

How to make a field in selection screen as READ_ONLY !!

Hi,
   How to make a field in selection screen as READ_ONLY !!.
Thanks,
Senthil

This is the code you need to have in your program.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF SCREEN-NAME = 'MYSELFLD'.
    SCREEN-INPUT = 0.
    MODIFY-SCREEN.
ENDIF.
ENDLOOP.

HOW TO MAKE THE FIELDS ON TABLE CONTROL SCREEN FIXED!!

Dear all,
Can you please tell me as to how to make the fields on the table control screen fixed (not respond to the scroll bar) i.e. simillar to MC88 screen , the first two fields are fixed and don't respond to the scroll.
Please Help!!!!
Vj

Hi
In TC, goto attributes and set 'Fixed columns' as 2. This will fix the first 2 columns.
Regards
Navneet

How to Make Assignment field in Details Tab Mandatory in MIRO

Similar Messages

Maybe you are looking for