How to make attachment opening preferences stay with the document through distribution.

I have a PDF that has links to other PDF's as attachments. I want these attachments to be opened in a new window on the target computer that I am sending this document to, despite what the target computer has it's preference set as. I don't want them to open in the same window as is the default option. Is there any way to do this?

You can edit the link and specify that it opens the target document in a new window. This will override whatever the user preference is set to.

Similar Messages

How to make Windows 7 Clean Installation with the Rapid Boot extreme feature on ThinkPad T420s

How to make Windows 7 Clean Installation with the Rapid Boot extreme feature on ThinkPad T420s

@Bennycui,
Clean install here
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-77353
Then install RapidBoot
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-77013
//JameZ
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD

Ap Div - How to make them move in browser with the rest of the page?

I have designed a site, but have placed an ap div "enrol now" button over an image, and when I view it in my browser, the ap div button does not move with the rest of the page.
http://www.moreefamilydaycare.com/HOME_02test.html
The "view our gallery" ap div is working.
Please help.
(you can see where the enrol now button should appear as I have put it in the main image pic aswell as a guide.)

APDivs are very tricky to work with especially if use them inappropriately as a primary layout method.
Here is why:
http://apptools.com/examples/pagelayout101.php
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Newest iTunes update: screen size is blown up. How to make it normal without messing with the computer's dimensions

Ok, so before the big change in iTunes, the iTunes window fit perfectly on the screen and there were no issues. Now, the iTunes window is blown up largely where I cannot even see my scroll bar. Even if I change the dimensions of the computer screen, nothing is working. Help!

Resize the iTunes Window.

How to make movies open in the center of my screen.

Does anyone know how to make Quicktime open up videos in the center of a screen? When I double click any movie file it pops open in the uppermost far left corner, and I have to drag it down into a more comfortable area. It's annoying with a large monitor.
Thanks
noodle--head

The script writing lobe of my brain was damaged by years of drug abuse, years ago. Try as I might, I can't seem to get it right.
The most common error I get is:
Expected end of line, etc. but found “end tell”.
I tried modeling one of any number of existing scripts but still no dice.
I tried this:
tell application "QuickTime Player"
activate
set the bounds of window 1 to {235, 58, 944, 590}
end tell
And got this error message: QuickTime Player got an error: NSReceiverEvaluationScriptError: 4
I know this is simple but, like I said...
nnooo-dlehead ssslowto catchon

How to make an hypertext link workable with adobe reader for IOS ?

Hello,
Hypertext links in a PDF file work perfectly well on Mac OS (Yosemite).
The same document on an IPAD with IOS is not able to open an hypertext link ...
How could I do to solve this problem ?
An author who want to publish electronic books with hypertext links on mobile devices

Hello Steve,
All my best wishes for the new year.
To answer your question :
. I am writing books on my IMAC with Yosemite (10.10.1) using Word (14.4.7)
of OFFICE MAC.
. I can open Hyperlink connection by clicking on the link
. I save the document in a .PDF format
. This document is sent to my IPAD with IOS 8.1.2
. In this .PDF document I am no more able to open hyperlink connection
Please see attached an abstract of my book.
Thanks a lot for your help and advices.
Michel Poncet
Tel: +33 4 76 89 50 82
http://www.amazon.fr/Glariand-Copent/e/B007NXP7FU
De : Steve Werner <[email protected]>
Répondre à :
<[email protected]>
Date : vendredi 2 janvier 2015 03:34
À : Michel Poncet <[email protected]>
Objet : How to make an hypertext link workable with
adobe reader for IOS ?
How to make an hypertext link workable with adobe reader for IOS ?
created by Steve Werner <https://forums.adobe.com/people/Steve+Werner> in
Adobe Reader for iOS - View the full discussion
<https://forums.adobe.com/message/7058559#7058559>
Hyperlinks can be of several types. What are you linking to? Exactly what
application did you test the hyperlinks with on the Mac? What application
did you use to create the hyperlinks?
If the reply above answers your question, please take a moment to mark this
answer as correct by visiting:
https://forums.adobe.com/message/7058559#7058559 and clicking Correct¹
below the answer Replies to this message go to everyone subscribed to this
thread, not directly to the person who posted the message. To post a reply,
either reply to this email or visit the message page:
Please note that the Adobe
Forums do not accept email attachments. If you want to embed an image in
your message please visit the thread in the forum and click the camera icon:
https://forums.adobe.com/message/7058559#7058559 To unsubscribe from this
thread, please visit the message page at
, click "Following" at the
top right, & "Stop Following" Start a new discussion in Adobe Reader for iOS
by email
<mailto:[email protected]eso
ftware.com> or at Adobe Community
<https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=
14&container=4631> For more information about maintaining your forum email
notifications please go to https://forums.adobe.com/thread/1516624.

How can I use terminal to make links open in same window the default behaviour, as it was in Safari 5.0, How can I use terminal to make links open in same window the default behaviour, as it was in Safari 5.0

In Lion, the default of pressing a link on a web page, is to open the page in a new tab. In itself, I do like this because this is what I did for 19 out of any 20 links, which I command+clicked in previous Safari versions.
However, there is a snag to this behaviour. Most (all?) secure site do not like links to be opened in a new tab. For example, when I am doing Web banking, The the linked page doesn’t open in new tab. Rather I get a page telling me my login session is expired. Probably a security measure instituted by my bank.
I since found out, that a command-click opens lings in the same window. Theoretically that solves the problem, if I would think about this all the time. I don't. Old habits die slowly.
Is there a terminal command to make links open in same window the default behaviour, as it was in Safari 5.0.

Hi Eric,
I got it figured out today, basically you have to load the Parallel Flash Loader first into FPGA ram. It is a special .sof file (pfl_epXXXX.sof) based on your FPGA. Code is actually pretty straight forward, using the Sys Exec VI. Use the windows based programmer to generate the .cdf file that identifies your FPGA, attached Flash and .pof file .
Syntax was odd going into Sys Exec. Note the extra "C" in in front of the "quartus_prm.exe" I have no idea why that was needed, but I was getting an error until I just happened to put it in there (Blind Luck :-))
I used a 2 element array going into a four loop
cmd /cquartus_pgm.exe -c USB-BLASTER -m JTAG -o P;pfl_epXXXX.sof
cmd /cquartus_pgm.exe -c USB-BLASTER -m JTAG S_FPGA.cdf
Defining the working director C:\altera\12.1sp1\qprogrammer\bin
And added match string with "Successfully performed operation" on the output in the loop to make sure everything loaded correctly then adding the array to give me a overall P/F
To anyone doing this same thing Altera's documentation is poor to say the least. It took most of a week to figure this out Not allowed to upload code, so anyone wanting details just post here and I will try to help. This was painful, with lots of lessons learned.
Thanks for the interest though
Best regards John

How to make Finder open automatically...?

How to make Finder open automatically when I insert external drive?

Make sure the Finder preferences are set to display hard drives:
OT

How to make "visa find resource" working with Agilent device

I am trying to use Agilent 82357B GPIB device with LabVIEW for instrument control.
I have checked:
1.       NI-VISA (ver 5.1.1) is the primary visa by checking visa.dll properties under windows\system32 folder
2.       Enable NIVISATulip.dll in NI Max Explorer
3.       Enable the Agilent libraries to work with NI 488.2 in Agilent IO library (ver 16).
I am able to communicate with the instrument in Max Explorer and talk to the instrument in LabVIEW with VISA write for almost all commands.
But I can NOT make one particular visa function (Visa find resource) working with Agilent 82357B GPIB.
With NI USB GPIB device, the same code above can find attached instruments as below, where GPIB1 is the Agilent device and GPIB0 is the NI device.
I have no clue on how to make “visa find resource” working with Agilent device.
Please help.
Solved!
Go to Solution.

Quick question. Did you also enable 488 support in Agilent?
If that does'not work try this. and well see if you found a bug
Jeff

How to make a PDF file short ( with less memory)?

How to make a PDF file short ( with less memory)?

@nalinss
There are two ways: "Save as.." usually optimises size, but there is also "Optimize PDF" in the menu with many options what to exclude and to reduce in quality. Be careful here, as pictures can become very bad.
A note: the size of a PDF vastly depends on from what source it is created. For example, if you draw some vector graphics in Visio and print to Adobe Printer, the resulting PDF is usually quite small in file size. Opening it in Illustrator and saving it again after you, let's say, just moved one line, can make it 10x as big. This is due to big overhead, Illustrator creates and this can not be reduced anymore in Acrobat later on. Sometimes it helps to convert or "save as" such an inflated PDF to a different format like EPS or HTML and print or convert again to PDF.
So, if you created the PDF yourself and you still have the source, you may adjust settings in the export/print dialog to make it smaller.

All of my photos now have the same photo when I look at them in the viewing area. I have to actually open the photo itself to see the actual photo. this makes it impossible to work with the photos in iphoto. Help!

All of my photos now have the same photo when I look at them in the viewing area. It makes it look as though all of my photos are the exact same! I have to actually open the photo itself to see the actual photo. this makes it impossible to work with the photos in iphoto. How can I return it so that I see the photo itself in the preview area? Thank you!

Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to rebuild the thumbnails. This can take three or four goes.
Regards
TD

How do I make a hands free call with the iphone 4s?

How do I make a hands free call with the iphone 4s? I have a bluetooth car device and when I try to talk through it (as I did with my old phone) to call someone it does not work. so far only hte last person called is redialed.

That is a carrier-based service. So first you have to make sure your service contract includes that feature.
It usually also includes Call Hold. So you call the first party, put them on hold, call the second, then reactivate the first. But only if your carrier allows you to.

How to open a file with the extension x3f (sigma)

how to open a file with the extension x3f (sigma)?

RAW data from the following Sigma cameras is currently supported:
DP1
DP1s
DP2
SD9
SD10
SD14
If your camera is among these, then simply import the photo as usual. https://helpx.adobe.com/lightroom/help/importing-photos-lightroom-basic-workflow.html

I was having an issue opening a spreadsheet with the file extension .xlsm. This appears as an attachment from a client which means macros were utilized when creating the spreadsheet. The problem lies in. The iPads ability to open the attachment. I downloa

I was having an issue opening a spreadsheet with the file extension .xlsm. This appears as an attachment from a client which means macros were utilized when creating the spreadsheet. The problem lies in. The iPads ability to open the attachment. I downloaded the numbers app thinking this would be a default software to open any and all spreadsheets.
Please Help!
Ipad 2- iOS5

You may need a version without macros on it. Unfortunately, pretty much all apps are skinned down versions of their original program, often with less functionality. For example in a word document I can italicize,bold and underline, but I only have a handful of fonts to play with and I don't think I can insert tables or images.
It is very possible that the app simply cannot run macros, which means that document may never work on an iPad.

Firefox open images in a new tab upon clicking the link,how to make firefox to save images in the folder upon clicking the link

firefox open images in a new tab upon clicking the link,how to make firefox to save images in the folder upon clicking the link.

You can right-click the image and use "Save Image As" to save that image.

How to make attachment opening preferences stay with the document through distribution.

Similar Messages

Maybe you are looking for