How to make audio (within a video) background music?

Hi: I have Adobe Premiere Elements 7.0. I have video of a guy singing that is three minutes long that I would like to use as the background music for a video montage. The video montage itself is about 3 minutes as well. I would like to start the video montage with the guy singing, then make the rest of the montage have just the background music of the guy singing (without the video of him). How can I do this? Thanks.

That's how I'd do it, too.
Another option might be to just plop the montage on Track 2 at the appropriate starting point and not do anything with Track 1 (the guy singing). The video from Track 2 would be used instead of the Track 1.
Not sure what would happen with the sound though - don't remember if Track 2 audio overlays Track 1 or if they get mixed
Also not sure what the OP wants... is the guy singing supposed to be "background" as in you can still hear the montage audio with the singing as light background, or whether the guy singing is the *only* audio.

Similar Messages

  • Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well

    Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well

    If you use an HDMI cable, the audiostream will be integrated, so there will be sound when using an HDMI cable!
    Not necessarily.  That only works as stated if you have one of the most recent MBP's that has a built-in HDMI port.
    If the MBP only has a Thunderbolt or miniDisplayPort, you need an appropriate adapter cable and even if you use an HDMI adapter or cable to connect to your HDTV there is no guarantee it will carry audio.  You have to determine if your specific MBP model supports audio out through its miniDisplayPort or Thunderbolt output, and whether the adapter does likewise.

  • Nokia n8 How to switch audio tracks in video playe...

    How to switch audio tracks in video player? and How can I connect an external audio track playback video?

    Re: Nokia N8 how to reset to factory settings [ New ]
    ‎2013-01-16 23:06
    Hiiii i hace the same problem i dont have pasaron to hard reset my Nokia 8 and i have a big problem, i cant maje calles , or go to the Home menú, or use wifi, dial aytihing I been having that message saying that there no memory and u have to delete some data, since then just menu screen it works but nothing else please help
    HI everyone! I also have the same problem as per above. Please help! Thank you!

  • HT1937 how to make iphone to iphone video call through sim card

    how to make iphone to iphone video call through sim card??

    use facetime to video call or any other app for that. you should have an cellular data connection or wifi to use this

  • How to Make Audio Video Broadcasting Programe using JMF

    hi i m newto java programing i wan to know can any one help me out how to transimit audio and video over netwrok from one pc to other computer voer the network . i m using my webcam to transmit video can any one of u email me the code if any one has made such application like this .. my email is [email protected]

    Well you've found the root of your problem. It's not necessary the JMF. It's when you make a jar file, you need to include the dependencies. I don't think it' legal to include the JMF in a program you sell or distribute, so be careful there.
    However, to include dependencies in jar files is not a hard task. The simplest method is to unjar the dependency and place it at the top or your classpath; then make a jar that includes both your program, and the dependency.
    A more long term solution is to use a build system such as ant or maven to create the package using available scripts or plugins. The "Uberjar" plugin for maven comes to mind.
    -vito

  • How to make picture in picture video semi transparent?

    I do know how to make picture in picture semi transparent if I import a photo instead of a video. However, if I import an video and want that video to be semi transparent at the right top cornor, I can do so with imovie? I know I can make the second video semi transparent if I use cutaway instead of picture in picture. However, I do not want the second video fill the whole screen, just the right cornor of the whole video.
    Please reply if you know how to do it in imovie. Thank you

    renaixbf wrote:
    ...  video to be semi transparent at the right top cornor, …  I can make the second video semi transparent if I use cutaway ...  I do not want the second video fill the whole screen, just the right cornor of the whole video.
    your wording confuses me ... what exactly do you want to accomplish:
    a cut-away replaces video, but keeps audio - that has nothing to do with 'transparency' (??)
    for sure, you can place and resize a PiP anywhere on the screen (pic#1)
    or, do you mean by 'semi-transparent' keying a PiP? (pic#2) A color-key within a PiP is not optional in iMovie; although, I tested it: if your source video contains 'alpha transparency', iMovie support that either.
    https://sites.google.com/site/karstenschluter/im09-counter
    or, do you want to manually change the compositing mode (pic#3)? That, indeed is not optional in iMovie.
    or, did you mean by 'just a part' cropping a PiP/second layer (pic#4)? Again, not optional in iMovie, complex compositing effects are habitat of professional tools such as FCPX.

  • How to synchronize audio track and video when transmitting by RTP

    since the audio stream and video stream are transmitted separately on the network even if in a merged data, how to synchronize the audio stream and video stream at the receiving end ?

    camelstrike wrote:
    Hi everyone!
    I've tried to make one of the processors, processor1, control the other processor, processor2, with processor1.addController(processor2) but I get a
    javax.media.IncompatibleTimeBaseException. I need to synchronize audio and video rtp-streams because they are sometimes completely out of sync.
    In JMF API Guide I've read:
    "2. Determine which Player object's time base is going to be used to drive
    the other Player objects and set the time base for the synchronized
    Player objects. Not all Player objects can assume a new time base.
    For example, if one of the Player objects you want to synchronize has
    a *push-data-source*, that Player object's time base must be used to
    drive the other Player objects."
    I'm using a custom AVReceive3 to receive rtp-streams and then I create processors for the incoming stream's datasource's, and they are ALL PushBufferDataSource's.
    Does this mean I can't synchronize these. If so is there any way I can change them into Pull...DataSources ?The RTP packets are timestamped when they leave, and they are played in order. You can't change the timebase on an RTP stream because, for all intensive purposes, it's "live" data. It plays at the speed the transmitting RTP server wants it to play, and it never gets behind because it drops out of order and old data packets.
    If your RTP streams aren't synced correctly on the receiving end, it means they aren't being synced on the transmitting end...so you should look into the other side of the equation.

  • Qosmio F30-140: How to make composite-in or video-in feature working

    Hi,
    I was using windows XP MC version, but now I switched to windows 7 64-bit version and I don't know how to make the composite-in or the video-in feature work.
    Does win-7 driver support this feature! or I need to use a certain software to make use of it?!
    Another thing I'm missing in this new windows version is the Dolby effects equalizer.
    Could any body tell me how to add this option to my sound card device or send me a driver that has this option.
    Thanks in advance.

    Hi
    As far as I know there is not full Win 7 support for F30 Qosmio.
    I found some Win 7 32bit drivers on the driver page but there are no 64bit drivers.
    There are Vista 64bit drivers check it!
    The Sigma sound driver has been released for Windows Vista 64 Bit. Try it!
    The composite-in or video-in port can be used in order to receive video signals from some external devices. For example you can connect a Xbox to the F30 and can use it in connection with Windows Media Center.
    http://www.microsoft.com/windows/windows-media-center/default.aspx
    You can also conenct an camcorder or similar devices.

  • How to make this effect ? ( video )

    Hi all
    how to make the screen blink dark like in this video  http://www.youtube.com/watch?v=TszuTgFx93U
    starts at 0.46 end at 0.50
    can anyone tell me hows it called ?

    If you mean this effect and then changing to a black screen then this is a glow with an add blend mode and a blur followed by a black layer multiplied with opacity keyframes.
    I would put the video on the bottom layer, then add an adjustment layer and set the in and out point of the adjustment layer to the length you want to have this effect. It's only a few frames in the sample video. Then I'd go to the middle of the adjustment layer and add Glow to see if you could get close to this effect. Then I'd animate the opacity of the adjustment layer from zero to 100 over a few frames. I'd then set a new black solid above that and set the blend mode to Multiply. Set the in point just past the second keyframe in the adjustment layer and set the opacity to 0. Then move in a few frames and set the opacity of the black solid to 100% and set the out point of the adjustment layer to the same spot. Then move down a frame or two and set another opacity keyframe for the black solid at 100% then move down a few frames and set the opacity to zero and set an out point for the black solid.
    Figuring these things out is just a matter of looking at the frames and trying to figure how to stack layers up to achieve the effect. Grab some stills from various parts of an effect you are trying to copy and then try and figure out what you could do to the footage to get the same result. Only a few of the effects you see are just a single plug-in applied to a single layer. This is the best way to learn After Effects.
    Here's what a comp would look like using a frame from the sample video. Note that the adjustment layer and the black solid are only a few frames long. I made a quick stab at the color grading of the frame by making some adjustments to the A and B colors of the glow, added some blur, and added a little color correction to the adjustment layer using curves. This should get you started.

  • How to make playlist of the video songs I have installed from computer

    How to make playlist of video songs I have installed from computer

    What on earth do you mean by "video songs"?

  • How to make a chart/table a background object?

    How do I make that grid into a background objective so that I can draw lines and similar things on top of it without it moving? Intending to use it as a coordinate system/grid/plane (or whatever it is called in English, but the thing refuses to stay still whatever I do to it. :/
    Also, sorry for my bad English.
    Thanks!

    click on table > Inspector > Wrap (3rd tab) > Object Placement > Floating
    Menu > Format > Advanced > Move Object to Section Master
    Peter

  • How to make audio cd images in leopard?

    I'm not trying to duplicate music. much of my music doesnt have album art and track info. its stored as mp3 in itunes. itunes refuses to pull up track info as they were not imported by it. so what i am trying to do is make audio cd copies of it and then reimport it to itunes. now, i have like 2000 songs. burning an actual disk would be a pain. in windows i would normally use nero to make an audio cd 'image' which can be mounted into a virtual drive.
    using disk utility i figured out how disk images of cd and dvd sizes can be made but the burn disk option (in itunes) only shows the super drive burner to burn an audio cd image to. any help?
    Neerav Kothari
    Message was edited by: AceNeerav

    i.3d wrote:
    This hardly clears my doubt, however, my point stands, if the info is NOT in an MP3, burning it to a disc OR creating a CD image is NOT going to help you (or iTunes) find the unique CD ID and get the missing info. NO, NO, NO
    There's no "unique CD ID". All iTunes does is look at the number and the length of each track on the CD, and measure that against what's in the online database. The closest match is offered up. If there's nothing close, then nothing is offered up.
    I took a vinyl record and imported the whole thing as an AIFF file. I chopped up the tracks into little bits, and then used Toast to burn the results to a CD. iTunes recognized it as a commercial CD release of the same album, and downloaded the correct artwork and all the track names. I was blown away the first time it happened, and it has happened again several more times with various old vinyl albums.
    It hasn't worked every time, but it has worked enough times for me to believe that the OP will have luck with his .mp3 files if he can burn them into a playlist that closely resembles the original commercial CD.

  • How to Make Audio Books

    Hi,
    I'm not sure if this is the correct place for this topic but I have a 80 GB Black Classic and was wondering how to make a audio book to add to my iPod.
    I have several audio books on CD that have numerous chapters in them. Is there some type of conversion program to convert these to files that can be loaded onto the iPod or are they just mp3 files when added? If they are just mp3 files, will they load onto the music playlist or how due you make them show up in the Audio books menu?
    Adding files from a CD does not seem to be a problem as far as converting or ripping them to iTunes to be then synced to the iPod, but I do not know if a different type of file is needed other than mp3 to be able to play them as a audio book.
    Any help on this matter would be appreciated.
    Thank you in advance
    Mr. Hoz

    If you had a Mac, you could take it a step further and add chapter like Audible does. I came across a a AppleScript called Join Together which uses a tool from Apple called ChapterTool. Basically, you select the files to join and run Launch Join Together from the iTunes script menu. A dialog box pops up allowing to set the Artist, track info, release year, Album, etc. It also lets you set the output bit rate, frequency, and stereo/mono. It will either output a .m4a file (music) or a .m4b file (audiobook). If you have Apple's ChapterTool install, it will have an option to add chapter names based ont he song titles.
    Example: I have a dramatized version of the NIV Bible which wad a separate mp3 file for each chapter. So, it was broken into 1189 files:
    Song : Album
    Genesis 01 : 01 Genesis
    Genesis 02 : 01 Genesis
    Genesis 03 : 01 Genesis
    Exodus 01 : 02 Exodus
    Exodus 02 : 02 Exodus
    Exodus 03 : 02 Exodus
    Revelation 20 : 66 Revelation
    Revelation 21 : 66 Revelation
    Revelation 22 : 66 Revelation
    After using Join Together, I now have only 68 .m4b files, one for every book except Psalms which I split into three parts (001-050, 051-100, 101-150). Now when I select oneof the books on the iPod, a list of chapters are shown except for r the 5 books that only have one chapter (Test: name the 5 books without looking them up. .
    I in the proces of doing this for more books which I kept the individual chapter files like _Teach Yourself Norwegian_ (2 CDs) and two _Birding By Ear_ books (3 CDs each).
    For some reason the Join Together script errors out about 10% of the time and I have to re run it. I haven't tried to troubleshoot the issue, yet. Also at the beginning when it starts to join the tracks, the script plays all of the files being joined all at the same time for about 10 to 30 seconds. What a noise that is!
    Enjoy life,
    Steven

  • HOW TO MAKE AUDIO SHOW THE SOUND WAVES?

    I was wondering if it was possible to show the sound waves on the audio track, whenever I plug in audio I cant seem to figure out how to make it show like it does in other programs such as Adobe Premiere? Thanks!

    Option-Command-W, if you're the keyboard type
    Otherwise, there's button right by the track height selector buttons, at the bottom left of the Timeline.

  • How to add audio from a video while recording.

    Hi,
    I want captivate to recognize the audio of the video when recording a video demo. I know that it is possible in captivate 6.1 but not sure how. It sounds lame but I am a beginner.

    Hi there,
    Welcome to Adobe Forums.
    You can do this by selecting the System Audio option on the recording window. Please refer to the below image:
    Hope this helps!
    Thanks!

Maybe you are looking for