How to make audioclip sound once in a thread?

in the thread, it sleep(100), so once I add the audioclip, it couldnot sound properly, and never stop.
how to make the audioclip sould once in that thread?
thank u so much!!!

Jurjen Heeck wrote:saslove sap wrote:>
> >
> > >
xinjiang li wrote:
> > > Hi:
> > > How to reference other's message in a thread when I wanna reply to him or her?Thanks in advance.
> >
>
> > Click the reply link with the message you want to quote, and then click the " (double quote) button/link in the editing screen.
> >
> > Jurjen
>
> Ha Ha for me also working !!...
>
> Regards
> sas
wow !!! it works

Similar Messages

How to make it sound as if it is in the next room.

I am new to the audio editing/mixing.
I am curious how to make dialog sound as if it is happening in the next room.
I vaguely remember a setting that was doing something like it and it was actually called similarly (In the next room), but now I can't find it.
If it doesn't exist and it was one of those borscht induced nightmares, how one would approach this anyway?
Thanks a lot in advance.

In the effects rack, there are several "room" settings you can apply, and tweak the parameters to make it sound as if it's in the same room or next door.

How to make camera sound totally silent?

I have Nokia E5 smartphone. I want to make camera sound totally off. I've download a patch file but it shows me certificate error. Is there any way to make camera totally off?

@ic3_fir3_
You're on the right track. Phone hacking isn't an acceptable topic in these official forums, but do some more web research or ask on unofficial Symbian site. I suspect you can still make it work, but sadly the process is harder than it used to be.

How to make a sound play after I complete a download in safari

I am just wondering if there is a way to make a sound go off after I successfully complete a download in safari 5.0.5.
If anyone can help, I appreciate it!

I do not think there is one actually. You could always look through the Safari Extention Gallary (https://extensions.apple.com/) and see if there is a 3rd party one you could use.

How to make Matcher stop once a reg exp match is found

Is there a way to make the regular expression Matcher stop reading from the underlying CharSequence once it finds a match? For example, if I have a very long String and a match for some regular expression is at the beginning of the String, can I make the Matcher object stop examining the String once it finds the match? The Matcher object seems to always examine the entire CharSequence, even if a match is very near the beginning.
Thanks,
Zach Cox
[email protected]

Nope, {1}+ doesn't work either. I know it's
continuing because I created my own CharSequence
implementation that just wraps a String orwhatever,
and I print to System.out whenever Matcher callsthe
charAt method.What about the lookingAt() method?I think lookingAt is like matches, except just the beginning of the CharSequence has to match (i.e. starting at index 0), not the entire thing. I tried it and it doesn't even find the reg exp. The find method at least finds the reg exp, it just reads too far.

Alarm clock - how to make it sound only, no vibration

Hi,
I hate being woken up by a vibrating iphone : is there a way to have a "sound only" mode for alarm clock?
Thanks,

Far as I know, you have to flip the side switch so that it doesn't show the orange strip AND turn vibrate off in Preferences/Sounds. That's the only way I've managed to turn off vibrate for the alarm clock. Of course, it's a pain to have to do it all over again when you want to set your phone to silent and still know someone's calling or texting you...

How to make stereo sound play also from rear speakers on X-

X-Fi is excellent card. Just one question though (CMSS 3D disabled, 5. speakers set correctly): when I play stereo file (like MP3) the sound comes only from front speakers. Well it's logical of course but my old Audigy duplicated the sound also to rear speakers (the center speaker wasn't used) - so is it posible also on X-Fi to play stereo music from rear speakers too without enabling CMSS?

Actually I just found out that this CMSS3D is VERY good way to expand stereo to 5. (although it's not what I originally meant) - so no need to reply me but I'll welcome any opinions anyway.

How to make a decent surround mix?

I've never used STP, but I'm hoping you experts can help. I've posted this question in the FCP forum but got no respsonse. So I did a little more searching and realized this might be a better place for the question.
My goal is to take two-channel HD video, add a stereo music track, and produce something that sounds good in full surround. Is there any good tutorial on how I might make a modestly better surround mix? I'm not trying to win an Oscar here, or become a sound engineer. So simpler is better, please.
I've worked out a way to put surround sound into my HD movie, burn it to a DVD AVCHD using Toast, and get it all to play on a blu-ray player, Cool!! It looks great and has 5.1 Dolby Digital surround, all on a cheap DVD disk. I get about 30 minutes on the disk.
But now I realize I don't know jack about how to make it sound good. All I've tried so far is putting a stereo song into the surround speakers with the movie stereo in the fronts as usual. It's pretty cool, but it isn't exactly "immersive".
I think I might get a better result using an upmixing tool such as Upmix 1.1.1 from Cycling '74 (or is it KVR Audio?) to simulate 3D sound from my 2D source materials.
Has anyone tried something like this? Is it worth the bother? Any tips appreciated.

My surround experiments test results:
Content: Two stereo tracks, a movie and a song.
Objective: Make a nice surround mix, something better than sending both tracks only to the fronts
Tools: Soundtrack Pro, Compressor 2.3.1 I have no system for "live" surround playback and no software designed to simplify front-rear fades and 3D sound placement. To test any mix, I have to burn it to disk and preview it on my (calibrated 7.1) home theater system.
*Hold Fixed:* No change was made to the stereo pan of either stereo pair. In all tests I let Compressor create a center mix at -3dB and a LFE using its low-pass filter checkbox.
*Experimental Design:* I have just four levers to pull - the level of each stereo pair in the front and in the rear. To simply testing, I used just 3 levels, 0 dB (no change), -3 dB and off, -∞. Four variables at 3 levels gives you 81 total combinations. Since I have to burn to disk, I can't run all those. Many tests can be eliminated as nonsensical, eg. the one test with all levels at -∞. Further eliminating the combinations that give level totals that are obviously too low or too extreme, I was left with 8 mixes I actually tested:
Movie Music
_F / R F/R Comment_
1. 0 -∞ -∞ 0 Uncomfortable, too "obvious"
2. -3 0 0 0 music a little dominant
3. -3 0 0 -3 music too front
4. 0 -3 0 0 not bad, music more forward than #6
5. 0 0 0 -3 music too front
6. 0 -3 -3 0 my favorite - very smooth transition when music starts
7. 0 0 -3 0 music too rear, oddly
8. 0 0 0 0 result pending
Conclusion: It's possible to make a dramatically improved sound mix over the two-channel stereo that is exported by iMovie. A starting point is simply duplicating the front signal into the surround speakers. A slight fade - in my case the movie was reduced in the rear and music reduced in the front - gives a nice "opening" of the sound and some sense of 3D. I believe this preset could be applied blindly to many movie+music projects and give an acceptable result.

I have a iphone3gs and it's vibrate dead , how to make it ?????

How to make vibrate

Settings > Sounds
Ensure the Vibrate is enabled in Silent and in Ringer and Alerts.

New ps4 makes vibrating sound with disk

Usually when i install games i get a loud whirr vubration sounds coming from disk drive if i put my hand ontop of the case while its taking the noise itll go away the noise sounds exactly like https://m.youtube.com/watch?v=GB3KdICDMns but in this video its constant for me it comes in whirs comes and goes . sound goes away if i place some cards under nderneath the feet so its lifted from the table but is this normal for bluray drive to make vibrating sounds once in while .while your instelling or lading cds

PatC_PSN wrote:
InfamousSixNL wrote:
Like you.said its a feet issue so if i had another ps4 and put it in same spot itll do the same thing? As in its normal? Also i already tried exchanging it they wont do it. But when game starts its quiet . oh ya forgot to mention my ps4 is sitting on a Wood table/ desk it looks flay and even so dont get it why the sound goes away if i place something under the feet.. But long story short its normal cuz of the ps4 feet design?Whoever sold it has no choice in the matter - they have a legal obligation to resolve the problem if it is faulty. But yours isn't faulty, so that doesn't apply. I suspect your surface isn't as flat as you think. http://uk.ign.com/wikis/playstation-4/PS4_Wobble

How do I make a sound play once the .swf starts?

I have loaded 'Audio.wav' onto the Library, and given it a linkage name of 'Speedcore' without the apostrophes. I ticked the boxes 'Export for ActionScript' and 'Export in First Frame'.
I want it to start once the .swf begins. I set Audio to Stream.
This is a code I found but doesn't work
var mySound:Sound= new Sound(); mySound.loadSound("Speedcore" , true); mySound.onLoad = function() { mySound.start(); }
Help? =)

Thanks, I will try it. The only thing I need is to learn global values or whatever. I'm using a money-system and I need to learn how to make it so you can only buy 1 of an item, and all that. But atleast I know the basics. Thanks Kglad!

How can I make a calender entry that makes a sound when it is its turn?

How can I make a calender entry that makes a sound when it is its turn?

Have you even looked at the calendar app? Did you not notice the "Alert" field in the event details when you create a calendar event?

I have the iPhone 4. and when I updated the software to iOS6 My notifications don't make a sound anymore, the only sound that I get are text messages, or Email. I checked to see if the other apps were muted and they weren't. How do I fix this??

I have the iPhone 4. and when I updated the software to iOS6 My notifications don't make a sound anymore, the only sound that I get are text messages, or Email. I checked to see if the other apps were muted and they weren't. How do I fix this

You cannot update iPhone 4 to IOS 8.1.2, the highest you can update is IOS 7.1.2.
Unless you've iPhone 4S (looks similar to iPhone 4)

On my iPhone 4s, how do I make it so it doesn't make a sound when I send a text?

On my iPhone 4s, how do I make it so it doesn't make a sound when I send a text? Even if my ringer is set to high, I don't want it to make a sound when it sends my texts..can anyone help?

Flip the Ring/Silent switch.

I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen. How can I make the sound alert work?

I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen. How can I make the sound alert work?

I have had this same problem for weeks now with my 4S. I just got a new 5S after being extremely frustrated and the same thing - no sounds. After searching posts all over, I couldn't find a solution. I just told my friend of the issue and he asked "Do you have the Do Not Distrub on?" I didn't even know such a function existed. Upon looking that was exactly the issue.
To resolve, go to Settings> Do Not Disturb> Manual. If it is green, turn it off. You will now get phone calls and text alerts.
This functionality is also on your quick access utility menu (slide up menu). I assume this is how it was enabled on my phone.
I will post on other sites since I searched for weeks for this solution and didn't see it anywhere. Good luck!

How to make audioclip sound once in a thread?

Similar Messages

Maybe you are looking for