How to make autofs to pick up new NFS mount option?

Hi,
I've added a new mount option to an existing map auto_*. I've tried:
svcadm -v restart svc:/system/filesystem/autofs:default
svcadm -v refresh svc:/system/filesystem/autofs:default
but when checking via "mount," it still shows it's mounted before the service restart/refresh and the newly added option is not shown in the output. /etc/mnttab does not show either.
Also this is within a non-global Solaris zone if it makes a difference.
How do I make sure automount picks up the new mount options right away?
Thanks,
Edited by: ACORCL on Feb 12, 2013 4:52 PM

Yes. I restarted/refresh autofs after making a change to auto_* file (adding "llock" option to an existing mount).
I just ran "automount -v" and its output shows that mount point is remounted. However, "mount" output shows
mount_point on NFS_share list_of_options_here on Tue Feb 12 08:47:32 2013 <== which is still 9 hours ago
From where I cannot find the "llock" mount option I added in auto_* file in the "list_of_options_here" above.
If you have any suggestions, please let me know.
Thanks,

Similar Messages

When you change PC how to make connection with iphone and new PC

when you change PC how to make connection with iphone and new PC

Yes, you can do it the same as any other database. The code would be similar.
I'd also suggest you not to use the JDBC ODBC bridge for connection. There are other drivers available for that.
Regards
xH4x0r

How to make Firefox open automatically a new, empty tab in each start, but keep last sessions?

How to make Firefox open automatically a new, empty tab in each start? (keep last sessions as well) It will be good, because Firefox wont load the previous sessions last watched tab after start straight away, but keep my previous sessions tab as well in the browser.

Hello,
You can change your home page settings to open a blank tab:
* Tools (or [[Image: New Fx Menu]]) > Options > General
* Beside "Startup", change to "Show a blank tab"
* See the article [[Startup, home page and download settings]] for more information
To retrieve your previous browsing session, first make sure that you are not running in [[Private Browsing - Browse the web without saving information about the sites you visit|Private Browsing mode]]. When you start Firefox, to recover your previous session, you can go to:
* History (or [[Image: New Fx Menu]] > History) > Restore Previous Session
* Please see [[Restore previous session - Configure when Firefox shows your most recent tabs and windows]] for more information

How to make Recovery Partition in my new HDD (Win8.1)

I already re-install my Win8 with usb.
But after finish the installation (I choose Fully Clean in my new HDD), why there is no Recovery Partition like my old HDD (original HDD)?
how to make a Recovery Partition in my new HDD?
Thx

Creating the recovery partition
Right-click the start orb, and start 'Disk Management'.
Shrink the C: drive by let's say 20-30GB.
Then create a new Partition and assign the R: label to it and name it RECOVERY.
Then open command prompt as administrator and type: 'recimg /createimage <directory>',
In this case: 'recimg /createimage R:\' to save it on the new partition.
This step may consume a lot of time.
Now we need to register the newly created recovery image: 'recimg /setcurrent <directory>'
'recimg /setcurrent R:\'
Voila you are done.
Restoring from recovery partition
You may want to use this restoring method by default, because it is the easiest way to do so if your recovery partition is still intact. If not, look at the other recovery methods to see which suits you best. This is usually the way you reset or refresh your Windows installation if you purchase a computer from a brand like Lenovo instead of building one yourself
Press the Windows-key + C to open the charms bar or swipe in from the right.
Click Settings.
Click Change PC Settings.
Click Update & Recovery in the menu on the left.
Click Recovery.
If all your documents are safe and sound in your user folder, you can use Refresh your PC without affecting files. However I still recommend taking a back-up... If you want to do a complete reinstallation of Windows and also clean your user folder in the process then choose Remove everything and reinstall Windows.

How to make my Aluminum Casing Look new again

How can I clean up my physical appearence of my mac so as to make it look all new and shiny. There are sever ***** and dents which I can open it up and smooth it out, but there are some scratches and spots where the paint has rubbed of and I want to paint over it.

Your best bet would be to just go on eBay and find someone who sells the LCD casing by itself. I got one for $50+ from LaptopAid (user ID / seller).
Or, you can buy one BRAND NEW from WeLoveMacs.com for $99.99 (or it might have been $79.99). An Apple OEM part.
There's no other way to make your lid/casing brand new. And it's "easy" to pop off and put the new one in. You don't have to take off the display unit just to do it, as I learned.
Also, the top casing where the keyboard is is also replaceable. Also got mine on eBay. The model A1106 and after are easy to take off. Before that, is harder, since there was a "latch" on the top of the optical drive area that had to be undone before you could replace the top case or even remove it. Putting it back together was a pain, and most people who've done so have shown evidence of doing so, since the top case and bottom pan don't line up anymore.
Although, do you have an Aluminum or a Titanium?? You said "there are some scratches and spots where the paint has rubbed off and I want to paint over it."
Our aluminums don't have paint on it. It's strictly aluminum. So there's no paint to paint over.

How to make Dictation give me a new paragraph?

I've learned how to make Dictation do most of the things I want as far as formatting, quotation marks, and capitalization goes, but it definitely does not work for me when I say "new line" or "new paragraph". It treats new line by leaving one space between sentences, and treats new paragraph by leaving two spaces between. But they're always on the same line. Ideas appreciated. The default support page didn't help me.

Ah, yes, thank you! That's it

How to make a people picker field editable using Javascript

Hi All,
I wrote an javascript which populates current loggedin user name on to an people picker, which is working fine,
But its making the people picker field as readonly, i want this field to be editable so that i can add more users with the current loggedin user name already populated in the newform.aspx
below is the script what i have written
<script src="/_catalogs/masterpage/MashreqMasterpage/scripts/jquery-1.5.1.min"></script><script type="text/javascript" src="/_catalogs/masterpage/MashreqMasterpage/scripts/jquery.SPServices-0.7.1a.min.js"></script><script
type="text/javascript">
$(document).ready(function() {
var user= $().SPServices.SPGetCurrentUser({fieldName: "Title"});
$("div[title='Name']").text(user);
</script>
please help, thanks in advance

Hi,
Please modify your code a bit as below, it won’t make the people picker control read only after setting a value:
var controlName = "MyPersonField";
// Select the People Picker DIV
var ppDiv = $("[id$='ClientPeoplePicker'][title='" + controlName + "']");
// find the <input> under pp DIV
var ppEditor = ppDiv.find("[title='" + controlName + "']");
// Get the instance of the People Picker from the Dictionary
var spPP = SPClientPeoplePicker.SPClientPeoplePickerDict[ppDiv[0].id];
ppEditor.val(user);
spPP.AddUnresolvedUserFromEditor(true);
Best regards
Patrick Liang
TechNet Community Support

How to make an ipad recognize a new user

I gave my ipad 1 to my sister. I created an apple id for her already. How do I delete my account in the ipad and make it recognize my sister as its new owner?

Go to settings>General>Reset>Erase all contents and Settings. The set up the iPod like a new one either via wif or connect to her computer and setup via iTunes.

How to make iPad 2 look like new?

Hello I want to reset all settings, apple id and other things. I want him to look like new.
Delete all information. How I can do it ?

make sure you have everything backed up because it will go back to factory setting so everything will be deleted in the iPad

How to make the alarm on the new Zen wo

Ok, I guess I'm missing something. I have the new Zen 6GB player. I set the alarm time, make sure it is on, but nothing happens at the set alarm time. No screen indication, no sound, no nothing?
What is the alarm supposed to do? How do you set it up?
thanks

My alarm works fine on my 4 gb Zen using the latest firmware release. The firmware works the same on all 2/4/8/6/32 GB Zens.
I told you two times that there is something wrong with your 6 GB Zen. Please Contact Creative.
How many other links are you going to reply to and say something is wrong with your Zen
You were told by Creative to also contact them. What is your game
My canned statement: There could be a million things that could go wrong with your Zen player so you will not be the FIRST or LAST to have a problem. Keep in mind, there are many, many others that have a Zen with no problems whatsoever. Things happen, but Creative is there to help. Contact them!
Cheers
BTW - For other users not familar with sebastiankf just click on his user name and read his posts and you will see for yourself.

How to make a boot disk for new iMac?

I just purchased a new iMac equipped with a bare bones 1TB SATA hard drive. I want to replace that disk with a 1TB SSD from Crucial (less than 1/2 of the cost of purchasing the iMac with the SSD). I have a Time machine backup of the iMac on a Time Machine/Airport device; how do I make a boot disk that can get the OS up and running, and able to restore the backup from the Time Machine?
Thanks,
Tony Darst
Baton Rouge, LA

tdarst wrote:
I had not given the warranty issue any prior thought; thanks for pointing that out. Is there a way around the warranty issue; such as a "factory authorized" way to install it, that is feasible?
Thanks for the quick response...
TD
You can take it an AASP to have the install done however you probably would be better off returning the machine (assuming it was bought directly from Apple and is less than 14 days old) and buy the configuration you want. Even if an AASP does install the SSD there is no guarantee Apple will honor the warranty, it's 100% at their discretion.

FillBy always fills in the same row in data grid view. How to make it fill in a new row for each click of the Fillby Button? VB 2010 EXPRESS?

Hi there,
I am a beginner in Visual Basic Express 2010. I have a Point of Sale program that uses DataGridView to display records from an external microsoft access
database using the fillby query.
It works, but it repopulates the same row each time, but i want to be able to display multiple records at the same time, a new row should be filled for
each click of the fillby button.
also I want to be able to delete any records if the customer suddenly decides to not buy an item after it has already been entered.
so actually 2 questions here:
1. how to populate a new row for each click of the fillby button
2. how to delete records from data grid view after an item has been entered
Thanks
Vishwas

Hello,
The FillBy method loads data according to what the results are from the SELECT statement, so if there is one row then you get one row in the DataGridView, have two rows then two rows show up.
Some examples
Form load populates our dataset with all data as it was defined with a plain SELECT statement. Button1 loads via a query I created after the fact to filter on a column, the next button adds a new row to the existing data. When adding a new row it is appended
to the current data displayed and the primary key is a negative value but the new key is shown after pressing the save button on the BindingNavigator or there are other ways to get the new key by manually adding the row to the backend table bypassing the Adapter.
The following article with code shows this but does not address adapters.
Conceptually speaking the code in the second code block shows how to get the new key
Public Class Form1
Private Sub StudentsBindingNavigatorSaveItem_Click(
sender As Object, e As EventArgs) Handles StudentsBindingNavigatorSaveItem.Click
Me.Validate()
Me.StudentsBindingSource.EndEdit()
Me.TableAdapterManager.UpdateAll(Me.MyDataSet)
End Sub
Private Sub Form1_Load(sender As Object, e As EventArgs) Handles MyBase.Load
'TODO: This line of code loads data into the 'MyDataSet.Students' table. You can move, or remove it, as needed.
Me.StudentsTableAdapter.Fill(Me.MyDataSet.Students)
End Sub
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click
Me.StudentsTableAdapter.FillBy(Me.MyDataSet.Students, ComboBox1.Text)
End Sub
Private Sub Button2_Click(sender As Object, e As EventArgs) Handles Button2.Click
Me.MyDataSet.Students.AddStudentsRow("Jane", "Adams", "Female")
End Sub
End Class
Get new key taken from
this article.
Public Function AddNewRow(ByVal sender As Customer, ByRef Identfier As Integer) As Boolean
Dim Success As Boolean = True
Try
Using cn As New OleDb.OleDbConnection With {.ConnectionString = Builder.ConnectionString}
Using cmd As New OleDb.OleDbCommand With {.Connection = cn}
cmd.CommandText = InsertStatement
cmd.Parameters.AddWithValue("@CompanyName", sender.CompanyName)
cmd.Parameters.AddWithValue("@ContactName", sender.ContactName)
cmd.Parameters.AddWithValue("@ContactTitle", sender.ContactTitle)
cn.Open()
cmd.ExecuteNonQuery()
cmd.CommandText = "Select @@Identity"
Identfier = CInt(cmd.ExecuteScalar)
End Using
End Using
Catch ex As Exception
Success = False
End Try
Return Success
End Function
In closing I have not given you a solution but hopefully given you some stuff/logic to assist with this issue, if not perhaps I missed what you want conceptually speaking.
Additional resources
http://msdn.microsoft.com/en-us/library/fxsa23t6.aspx
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

How to make "Read Report" pick up enhancement code as well

I want to enhance a SAP ECC6 program - H99CWTR0 (Wage type reporter). I need to add some more master data objects from other HR tables.
I have succesfully applied implicit enhancements to this program to allow my users to select extra data objects and to retrieve the relevant data from the database. However, the program reads a subroutine pool called H99CWTR0_ALV_TEMPLATE and makes dynamic run time changes and generates a temporary subroutine pool. I have also had to apply implicit enhancements to the template but this is not read by H99CWTR0. So I am unable to to keep the shared data segment in line with the driver program H99CWTR0 which leads to an ABAP dump.
I would prefer to make all changes to SAP programs using the enhancement framework rather than having to clone SAP programs into the "Z" namespace.
Is there a way of making the "Read report" pick up the implicit enhancement code as well as all the other includes in the template?

Hi Prabhu
The dump text said -
"The length of COMMON PART "DRIVER_DATA_EXCHANGE" in program "%_T0DYT0" is different from the corresponding area in the calling program "H99CWTR0".
Length of the COMMON PART in program %_T0DYT0: 1224 bytes
Length of the COMMON PART in program H99CWTR0: 1232 bytes
There is probably an error in the program "H99CWTR0"."
My enhancement to H99CWTR0 is being accessed, but the equivalent enhancement to H99CWTR0_ALV_TEMPLATE is not. Hence the discrepancy in the length of common shared data segment.
The ABAP line "read report iv_template into lt_code." in include H99CWTR0_FORMS is not reading the implicit ehancement code I added. So when the ABAP line "generate subroutine pool lt_code name ov_driver message mm line ll" is called to generate the temporary subroutine code my code is lost.
Regards
Phil Smith

How to make a hyperlink to open new small window?

HI!
I try to make Dreamweawer to do next action when i click on
some hyperlink on my page:
- open new small sized window that does not have any
navigation buttons from browser (back, forward, stop,...)
- in that window there should be only picture and some text
Probably stupid question ...but i would be happy if someone
can help me.
Thanks all
Xedor!

Go to Dreamweaver Exchange and search for "Smart Link." The
extension is free, and it will meet your needs mentioned above.
Good luck!

How to make default settings for a new Finder window ?

Will, i am abit ashamed to ask this question cause it's problaby very basic OSX knowledge.
However, since using 10.0 , i never have find a solution ..
What i want is this:
EVERY new Finder window i open, be it with the keycommand (CMD)+N, or double clicking a Folder a disk icon, has to be shown to me in only 1 way
which i have setup beforehand.
I am talking bout: List view only, with specified columns ("date added" for example etc) in a vast specific order.
For these settings, i open one finder window, setup the "view options" for that window, re-arrange the columns, then do: save as default"
Now, i would say that next time i open a new finder window, (keycommand (CMD)+N, or double clicking a Folder a disk icon), it defaults to the settings i made above.
But nada.
OSX has always intuitive for me but this issue scratches my brains.
Can someone please help ??

Hi Kappy, you are a Hero !
Especially this, which i really didn't know: (quote) : "Note that the configuration will only stick whenever the Finder window is opened on the same directory where it was created"
Very, very helpful !
Even the order of the columns is retained
However, i wish the (CMD)+J settings would apply for ANY Finder window you open, not just ones that are in the same directory.
Cheers and thx again !!

How to make autofs to pick up new NFS mount option?

Similar Messages

Maybe you are looking for