How to make Barcode report?
i do really need the fonts which is needed for making the barcode on the report builder ...............i need only the fonts cus i have the (pll)library.....if any one have it and can help lps contact me.........and thanks for every thing
Hossam,
if you ask this on teh Reports forum then I am positive that you get the fonts. Also, as a hint for the furture: Oracle9i Reports if Web only and there use a barcode Java Bean for the same task. So you may want to look for this as well. The Bean and documentation is available on teh Reports product page on OTN
Frank
Similar Messages
-
How to make slow reports fast?
Hi all,
How to make slow reports fast? What could be the various reasons and optimizations/solutions?
Thanks,
Charles.
++++++++++++++++++++++++++++++Its an on going process. Couple of steps you will have to follow: Did you perform any SQL trace ..?
Did you perform any ABAP trace...?
How much business data these reports are processing.Is there a possibility you can do some changes.
SQL Trace ( SAP in built tool) will give you a fair idea about each and every SQL statements in your report. And you can anlyze bad ones. And also propse optimized SQL or
index if needed.
ABAP Trace(SAP in bulit tool), you can find out amount of ABAP run time thats being elapsed by each and individual abap module.
Also the amount of business data is every important. While designing the report alogorithm this is very important factor. -
How to make RDLC report two column
Hello. I have a simple report which is supposed to be used for printing stickers. The sticker paper is A4 size and it has two columns. I successfully managed to print data to left column. I also want to print data to right column too. My current report looks
like this :
[Title]
[NameLastName]
[Address]
How can I make my report to fill data to two columns? Thanks in advance.Thank you for your response. Here is what I have :
Here is what I need :
Thank you very much. -
How to make the report run with urls supplied parameters
I have a report that I send the report's parameters by URL.
How can I make the report automatically run with the parameters supplied?
So when the report opens the user does NOT have to click the "View Report" button the report would just run and display the results for the user?
Thank you for you help.Take your iPad to the apple store and explain your problem. They won't make you sit there for an hour to reproduce the problem. I took an iPad back a month ago wit h screen problems. They didn't look at the problem, they just exchange it.
Again, Apple won't make you stand on your head to reproduce a problem with one of. their produces. -
How to make barcode interface with SAP B1
Hi all,
I need an interface code to make an interface between barcode printer with SAP B1. i got a scenario from the barcode people. that they are using EPL coding only for Barcode printer print, there they need to run this EPL code in Dos mode, for that .bat file is needed. hope you might got some idea that how a barcode printer is working. now how to make an interface of SAP B1 with Barcode printer.
how to generate a code which will put the bar code and price with the AP invoice of the item in EPL code which is in a text format. so that by .bat format txt file should be run in dos mode.
if you have any other process to run the EPL code, kindly send me the details as soon as possible....its very urgent.
regards
sandipSandip,
I think what you may be more concerned about, rather than the printer "language" (ZPL, EPL, etc...) is the symbology that you require for barcodes. Like 3of9, code 128, etc.
The standard B1 PLD will input a barcode image for whatever field you specify, but only in a couple of symbologies. The Advanced Layout Designer apparently supports a lot more. I have read that it may be requested from you partner, or if on 2007, it is part of the standard install.
B1 should pass the bar code to the printer, where the printer's language will decode and print it out. Bypass the .bat file, bypass DOS, let B1 do it.
Is your Epson printer supported under Windows? -
How to Get Barcode Report in Oracle Fusion Middleware.
Hello Freinds,
I am Using Oracle Reports 11g (Oracle Weblogic 10.3.3). I want to configure barcode report in this application server. Earlier in Oracle 10gAS it was oraclebarcode.jar file to enable the functionality. Please provide me the information to enable barcode functionality in Oracle Fusion Middleware. Thanks in advance.
VivekWhat OS?
You probably need to add fonts to what ever system you using. -
How to make OBIEE reports available during the DB tables data refresh?
Experts,
We have our production ETL run for 2.5 days every month. OBIEE reports will not be available during the run. We have a requirement to make the reports available all 24 hrs 365 days. So, what we are trying is to copy all the fact/Dim tables to the new schema running in the same or different DB server and amend the connection pool to point this schema during the run. Here are my questions. Is this a workabale solution (or) is there better approach for meeting our requirement
Regards,
SarvanI would suggest this option:
Store the following connection pool values in a table and call them in your connection pool using Connection Pool Scripts
Data Source Name
User ID
Pwd
when ever you want to change db just you need to edit these values that would help your bi with no downtime.
You might have to tweak it little bit if needed.
More or less we have use sometime back to a client where they want to switch dbs dev to test to etc
Try it out.
BTW: 2.5 days load time for Full load or Incr?
Edited by: Srini VEERAVALLI on Feb 1, 2013 8:40 AM -
How to make crosstab report in crystal report
Hi all ,
I want to make a crosstab report in crystal report
my query is like this
select YearDate.year ,
(currentasset.currentaset / currentliability.currentliability ) as CurrentRatio
,(currentasset.currentaset - Inventory.Inventoryaset / currentliability.currentliability ) as QuickRatio
from
select distinct YEAR(JDT1.RefDate) as year from JDT1
)YearDate left join
select YEAR(JDT1.RefDate) as year,sum(JDT1.Debit - JDT1.Credit ) as currentaset from JDT1,OACT
where JDT1.Account = OACT.AcctCode
and OACT.AcctCode = '11'
group by YEAR(JDT1.RefDate)
)currentasset on YearDate.year = currentasset.year left join
select YEAR(JDT1.RefDate) as year,sum(JDT1.Debit - JDT1.Credit ) as Inventoryaset from JDT1,OACT
where JDT1.Account = OACT.AcctCode
and OACT.AcctCode = '11.05'
group by YEAR(JDT1.RefDate)
)Inventory on YearDate.year = Inventory.year left join
select YEAR(JDT1.RefDate) as year,sum(JDT1.Debit - JDT1.Credit ) as currentliability from JDT1,OACT
where JDT1.Account = OACT.AcctCode
and OACT.AcctCode = '21'
group by YEAR(JDT1.RefDate)
)currentliability on YearDate.year = currentliability.year left join
order by YearDate.year
So if i view the data in sql server it should be like this
Year CurrentRatio quickRatio
2006 501 100
2007 600 200
2008 700 300
2009 900 400
I want to make a crosstab with the column is year . the Year is dynamic according to the selection
So if i select the year from 2007 to 2009
It should be like this in report
2007 2008 2009
CurrentRatio 600 700 900
QuickRatio 200 300 400
How can i make it in Crystal report ?
I have use the template in crosstab crystal report, but there is not suitable.
Can i make manually. ?
Thanks in advance
Regards
KKHi kevin,
thanks for your respond . Actually, it's work.
But i have some issue again.
How can i make a grouping
So the grouping per Item
For example
2006 2007 2008
Group 1 Item A 5 6 7
Item B 7 8 9
Group 2 Item C 9 0 0
Item D 8 8 9
And another question, Is there always have row summary ? It seems that after the 2008 column, there is a total column, Can I remove this ?
Thanks in advance
regards
KK
Edited by: kah kian on Jun 2, 2011 4:17 PM -
How to make Barcode Size double.
Hi,
I need to print Barcode with double size to existing Size.
In SE71, in Character Formats, There is no Size Specification is there. Cient requirement is to make the Barcode Double.
We are using RSNUM Barcode. In SE73, SAP is not allowing to create a new barcode or change the existing Barcode.
How can we make the BARCODE size double. What are the prerequisites that needs to be considered.
Thanks & Regards
Sathish Kumar.Hi
Sathish,
Do like below .
GO to Tcode SE73
Choose System Bar Code and press Change
Form the list choose your Barcode.
Double Click on it..Pop Up will show the existing Dimensions
Change them as per ur need ( Height and width will be available )
It needsTR ..Save
And job is done ,
Hope it Helps.
Praveen -
How to Make a report from two cubes
Hi, guys,
i'm trying to create a report use the data from two different cubes, but that's a problem. what i want to do is like this:
From Cube A, i want to get the total machine number for each type of machine:
Type machine | Total machine
Type A 10000
Type B 15000
Type C 40000
And from Cube B, i want to get the machine amount which has an error, also group by machine type:
Type machine | Broken machine amount
Type A 50
Type B 15
Type C 100
So what can i do to create a report like below:
Type machine | Broken machine amount | Broken machine ratio(%)
Type A 50 0,5
Type B 150 1
Type C 100 0.25
Thanks a lot,Hi, Nicolae, use ur idea, i can get the table u show:
Type | Machine amount | cube
Type A 10000 'cube A'
Type B 15000 'cube A'
Type C 40000 'cube A'
Type A 50 'cube B'
Type B 15 'cube B'
Type C 100 'cube B'
but with this table how can i get the table which i want:
Type | Machine amount | % of machine
Type A 50 0.5
Type B 15 0.1
Type C 100 0.25
I have no idea, 2 things in ur idea have to be considered:
1. just show the record of 'cube B'
2. to get the data that cube B machine amount/ cube A machine amount
Need your detail explain, thanks -
How to make a report in RME to display all POE capable devices
Hello,
I need to create a report that will list switches in my network that support POE. Most of our switches are 3750 stack and I know most of them have POE capabilities but whenever I generate the report under RME POE Port Level Report or POE Report it gives me an error that says none of the devices are POE capabled/enabled.
Does anyone know how to generate this kind of report? I tried making a template but I still couldn't produce the result that I need.
Thanks in advance.HI ,
CSCsx15486 Bug Details
RME cannot create Inventory PoE Report for certain switches
Currently, RME is only able to create PoE Inventory reports for Cat3750 and 3560 switches:
WS-C3560-24PS - 1.3.6.1.4.1.9.1.563
WS-C3560-48PS - 1.3.6.1.4.1.9.1.564
WS-C3560G-24PS - 1.3.6.1.4.1.9.1.614
WS-C3560G-48PS - 1.3.6.1.4.1.9.1.616
WS-C3750E-24PD - 1.3.6.1.4.1.9.1.792
WS-C3750E-48PD - 1.3.6.1.4.1.9.1.791
WS-C3560E-24PD - 1.3.6.1.4.1.9.1.795
WS-C3560E-48PD - 1.3.6.1.4.1.9.1.796
It does not work for other switches.
Even the 3750G switches are not currently supported. The sysObjectID is:
.1.3.6.1.4.1.9.1.516
Thanks--
Afroj -
How to make the report shows only top level steps
HI,
I use many subsequences in my tests. I have no interest to see them in the report. How can I force the report to show only top level steps?
Thanks
RafiI needed to prevent 'Skipped' steps from appearing in my reports. One way to do this is to override the SequenceFilePostResultListEntry callback in the model. You do this by clicking on Edit and then Sequence File Callbacks and then find SequenceFilePostResultListEntry in the list and click the Add button.
Edit your new callback in your sequence file to check for a pre-condition. In my case I checked for Parameters.Result.Status == "Skipped" since that parameter is set to Skipped, Done, etc. based on the result.
If the condition was true then my only step in the callback was to set Parameters.DiscardResults = True. The TestStand model will then throw that result away when it processes the report. You could add a step for every type of data you wish to discard.
A second method that is easier to implement, but time consuming, is to select each step you DON'T want in your report and bring up the Properties for that step. Under the Run Options tab, deselect the Record Results box. That will keep the results of that step out of the report, but you have to do this for EVERY step you don't want to have reported. The first approach I provided acts to filter the results.
If you aren't sure what the Parameters.Result.Status will be, then set a breakpoint after that step is executed and scan the parameters when the sequence is halted there. You can then detect the actual text used as a result for that step, such as "Done" and can set your pre-condition appropriately. -
Gurujees,
We are using SAP E6. How to swiftly extract Liquidity Report following the month-end.
Summary of Bank Transactions only gives, a) transfer to corporate HO, b) payments to vendors / customers, and c) revenue / receivable receipts. So how to capture these payments by activities, eg operating expenses in Bank and in Cash Journal.
Thanx in AdvanceHi Ashwin!
the infoobject is 0calday.
Multiprovider contains ¹ of Notification, Functional location,¹ of PM order, Date
So report must show the date of most recent PM order for
Functional location from Notification. -
Oracle reports how to make html report
hi,
i m using oracle froms & reports 10g , i want to genrate a html report that wud have hyperlinks ,by cliking on hyperlink another report would be genrated and so on.
how can do this ?
thxsPlease see ...
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b13895/orbr_howto.htm#sthref1125 -
How to make "Read Report" pick up enhancement code as well
I want to enhance a SAP ECC6 program - H99CWTR0 (Wage type reporter). I need to add some more master data objects from other HR tables.
I have succesfully applied implicit enhancements to this program to allow my users to select extra data objects and to retrieve the relevant data from the database. However, the program reads a subroutine pool called H99CWTR0_ALV_TEMPLATE and makes dynamic run time changes and generates a temporary subroutine pool. I have also had to apply implicit enhancements to the template but this is not read by H99CWTR0. So I am unable to to keep the shared data segment in line with the driver program H99CWTR0 which leads to an ABAP dump.
I would prefer to make all changes to SAP programs using the enhancement framework rather than having to clone SAP programs into the "Z" namespace.
Is there a way of making the "Read report" pick up the implicit enhancement code as well as all the other includes in the template?Hi Prabhu
The dump text said -
"The length of COMMON PART "DRIVER_DATA_EXCHANGE" in program "%_T0DYT0" is different from the corresponding area in the calling program "H99CWTR0".
Length of the COMMON PART in program %_T0DYT0: 1224 bytes
Length of the COMMON PART in program H99CWTR0: 1232 bytes
There is probably an error in the program "H99CWTR0"."
My enhancement to H99CWTR0 is being accessed, but the equivalent enhancement to H99CWTR0_ALV_TEMPLATE is not. Hence the discrepancy in the length of common shared data segment.
The ABAP line "read report iv_template into lt_code." in include H99CWTR0_FORMS is not reading the implicit ehancement code I added. So when the ABAP line "generate subroutine pool lt_code name ov_driver message mm line ll" is called to generate the temporary subroutine code my code is lost.
Regards
Phil Smith
Maybe you are looking for
-
Import Image Sequence in Media Encoder CS4?
Hi all, Is it possible to import an image sequence in Media Encoder CS4 to export it in FLV? In the documentation, it's said in "File formats supported for import" that it supports jpg sequence (not png!?), but I don't know how to add an image sequen
-
Re: Satellite M300 - Can I restore Vista from Windows 7?
Hi, my laptop model is Satellite M300 I want to ask about can I able to use the recover discs that I created last time when I was using Windows Vista Home Premium, to restore it back to Vista after I format my C drive and install the new OS which is
-
Nested VLOOK up / IF ?
Im creating a database wherein there are 2 criterias that has to be achieved in order to identify the value that I need. Reference Table Names: Week # Score Name 1 1 88 Name 2 1 89 Name 3 1
-
Will Elements 12 support opening raw photos from my new Sony Cyber-shot DSC-RX100 II?
-
My mac pro no longer reads my moshi cardette
my mac pro no longer reads my moshi cardette, seems to have happened after the last two updates