How to make Birth date field (GBDAT) under IT0002 Personal data editable

Hello Consultants,
We had initially  Birth date field (GBDAT) under IT0002 Personal data editable ...But after upgrade is made non editable...
We want to make it editable again..
Kindly suggest how we can proceed abt this....

Hi Anju,
1. Go to PA30 >> Infotype 0002 >> On Date of Birth Field >> Enter F1 and find the Technical Parameter and idenfity which Screen is being Used... say for Eg: MP000200 / 2010
2. Go to Feature P0002 in PE03 and then identify the Return code for the Molga and Co. Code.
This Return feature is nothing but the Variable Key. Say for Example: 10
3. Now Go to SM30 >> T588M.....
3. Idenfity the Screen that you found in the  step 1 and Variable Key you found in Step 2.
i.e. MP000200 / 2010 / 10
5. Double Click on that record and Find the Screen Field P0002-GBDAT... this has been set to Output Field... change it to Standard and it will work.
Hope this helps !!!
Kumarpal Jain.

Similar Messages

  • How to make tax classification field mandatory in sales order ?

    Hi,
    while creating sales order, " how to make tax classification field mandatory ".
    Please tell me the procedure.
    In tcode OVA2. what are the entries for fields,table.
    Regards,
    sapsduser

    Dear ,
    Could you please share why you want to make tax Classification field mandatory in sales order.
    Maintain Tax classification field for customer in Customer Master Data = (Sales Area Data - Billing document Tab page)
    Tax Classification field for Material in Material Master Data = Sales Org. 1 View.
    While creating sales order and enter customer and material system automatically fetch the tax classification related data into sales order.
    Tax is calculated based on the ship to party.
    Hope this will help you.....
    Regards,
    Manoranjan.

  • How can i validate  the field directline under personal information of ESS?

    Hi all,
    How can i validate the field directline under personal information--> communication data  of ESS?The thing is we don't have NWDI setup in our organization.Is there any possibility of doing it under SPRO trn.
    Thanks and Regards,
    sam

    Hi,
    This is probably a wrong forum that you have posted your question to.
    Regards,
    Siddhesh

  • How to make read only field in Task list?

    Hi All,
    How to make read only field in Task list?

    This can be done one of two ways:
    1. Customize the form in Infopath, right click your field and disable the control.
    2. Use JavaScript/jQuery on the page to disable the element.
    Andy Wessendorf SharePoint Developer II | Rackspace [email protected]

  • How to make Sales Office field mandatory in VA01 initial screen?

    Hi,
    How to make Sales Office field mandatory in VA01 initial screen? I mean in the first screen where we enter the document type and the sales area?
    Regards,
    Ajit

    Dear Deepak,
    Thanks for the clarification.
    But, as far, I have understood the query - it is very simple and that is..
    Whenever one creates a Sales Order (T.Code: VA01), Parameter: Sales Office needs to be mandatory (for all Sales Order, irrespective of Customer Account).
    Until-unless, user won't enter the parameter: Sales Office, System will not lead to next page (now, here we need to enter Customer/ material etc...).
    I have answered the query, in this regards, only.
    Best Regards,
    Amit.
    Note: Pls. correct me, if I am wrong. Thanks for everyones guidance.

  • How to make valuation type field not changeable  in delivery tab of PO

    Hai friends,
                    I am new to badis..please guide me to solve the issue...
    how to make valuation type field not changeable  in delivery tab of PO...
    The field shd be in display mode only ...actually...there  a badi has been used before
    to get valuation type from a ztable depending on material and plant...
    Now ..my requirement is that the user shd not change the default value brought from the ztable...

    Hi SRINIVAS,
    You can achieve this from BADI only if BADI is allows you to do this. You cannot achieve everything from a BADI. Check if there is any expoting field in the methods that can be ticked for making the field in display mode. If not then you cannot achieve this from BADI.
    The field you want to default to display is a standard or zfield. If z, then you can changethe attribute of the screen field to Output only.
    Regards,
    Manish

  • Vendor Master Management - How to make 'Corporate Group' field an autoupdat

    Vendor Master Management - How to make 'Corporate Group' field an automatically updated field
    Frnz,
    I am doing a Spend Analysis and thereby restructring some aspects of SAP and business processes. One of the intiatives is to leverage the 'Corporate Group' field in Vendor Master for getting the consolidated spend visibility at the corporate group level of vendors. So far this field wasn't been used to effect. I can update it manually, but the question remains is how do I do with the change management of the corporate group of large vendor base in the scenario of everhappening Mergers and Acquisitions. Are there any alternatives anybody can suggest ? (Like linking D&B numbers etc)
    Thanks in advance for your suggestions..

    Hi Shiv,
    Let me elaborate the purpose of using this field. I want to have a consolidated spend visibility across a corporate group which has multiple vendor codes. Its difficult everytime to group the spends of these vendors manually especially when the number of vendors are too high. Also sometimes the names of vendor companies may not indicate that these are from same corporate group but in fact they could be. In order to have the reports generated on corporate groups, I must maintain this field in vendor master or a Z table. But the problem here is, it should be possible to update this field as and when there are any mergers or acquisitions at vendor side and the corporate group of a particular vendor gets changed due to this. So this has to be effected in vendor master or Z-table automatically. I do know that there are certain agencies like Dunn & Brad (DNB) which provide possibly the details on corporate group of a company but its not fully effective for Indian Vendors as its not mandatory on them to have DNB number & also its a disconnected process and I was looking to connect it seamlessly to Corporate Group field so that I need not bother to update these things manually everytime. I also wanted to explore various possibilities of doing this.
    I hope I have spelled it out correctly.

  • How to make WBS element field in Notification a mandatory.

    How to make WBS element field in Notification a mandatory.
    Should I use USer Exit.
    In cutomization I didnt find ant standard customization

    Hi,
         If it is about WBS element field in Maintenance Order then check up user exit ;- IWO10009 PM Order: Customer Check for 'Save' Event
    For Notification i am not sure whether this field is ther , but anything u can perform checkings via 
    QQMA0014 QM/PM/SM: Checks before saving a notification
    Alternatively u can also explore via Transaction variant SHD0 ..
    regards
    pushpa

  • How to make the CATEGORY field mandatory in the SMIN Support Ticket in test management?

    Hi,
    how to make the CATEGORY field mandatory in the SMIN Support Ticket in test management?
    Rg,
    Karthik

    Hi Kamal,
    This note steps will no validation that the user actually enters a value and the message will be created even if this 'required field' is left blank.
    Any other way to validate the enter a value also?
    Rg,
    Karthik

  • Warranty Date field in the equipment master data

    Hi everyone!
    I wanted to display the warranty date field in the equipment master data (IE01). I have already made the configuration and added the additional tab and screen thru this path:
    Plant Maintenance and Customer Service > Master Data in Plant Maintenance and Customer Service > Technical Objects > General Data > Set View Profile for Technical Objects
    But still, the tab is not added and the warranty date field is not found in the "Define Field Selection for the Equipment Master Record". please help me with this. We need this data because we are not using serial numbering and warranty master data that's why a way to track the warranty date is thru this adjustment in the equipment master data screen.
    Thank you very much.

    Marlon,
      Make sure that you have assigned this specific profile to the Equipment category of the associated equipment that you are creating under SPRO > PM> Master data> tech object > Equipment > Equip category.
    Regards
    Narasimhan

  • How to make a redirect without auto-redirect from the portlet "edit" mode?

    How to make a redirect without auto-redirect from the portlet "edit" mode?
    I use some sofisticated customizing with server-side validation of the form data. I want to redirect to the page of the portlet "show" mode and to the "edit" mode depending on the validation results. How can I do it?

    Heay.....this worked for me.
    I am able to change the mode programatically from edit to show.
    HttpPortletRendererUtil.handleEditAction(portletRenderRequest,"OK");
    I removed Apply , OK and Cancel buttons and applied my own Submit and Back button in Personalize mode and then change the mode to show on click of Back button using the above mentioned statement.
    Thanks
    ~Neeraj Sidhaye
    Try_Catch_Finally @ Y !
    ExtremePortal @ Gmail　Ｄｏｔ　Ｃｏｍ

  • Date field not working like a date field

    We have quite a few date objects in the Universe but only some seem to function as a date field whereas some do not.
    The easiest way to tell whether a date field is functioning as a date field seems to be to add the date fields as a filter in a query. If it is a proper date field a Calendar option appears. If it is not, no Calendar option appears.
    In the screenshot below, the Latest Approved Date functions like a proper date object and shows a calendar option. The other field does not even though it is a date field too.
    I'm checking with this forum as the Universe designer didn't have any answer for this.

    HI Vivek,
    Go to Universe Designer
    click on object (Latest Approved Date)
    click on definition
    go to TYPE scroll down and select type as DATE
    and export now check the filter it will work
    try once
    Regards,
    Ranjeet

  • How to make VIP flag in transaction code fpp2 as non editable

    Hi everyone,
    Please guide me about:
    How to make VIP flag in T Code FPP2 as non editable only for some particular users?
    Is there any authorization object exists for this flag in FPP2 transaction?
    Actually there are many users who have authorization of transaction fpp2. But we want only some particular users should have authorization of making changes to this flag.
    Please guide with your valuable replies.
    Thanks and Regards

    Hi...MP Vashishth
    try to creat an Authorization Management ...  in customizing...
    Cross-Application Components --> SAP Business Partner --> Business Partner --> Basic Settings --> Authorization Management
    Creat an Grup..and others steps...!
    and when finish clic on Generate and Assin Authorization !!!
    I Hope it Help !
    regards
    Andre Frugulhetti
    Edited by: Andre Frugulhetti on Sep 22, 2009 9:38 PM
    Edited by: Andre Frugulhetti on Sep 22, 2009 9:39 PM

  • Restrict date field in vf01 to system date .

    hi gurus,
    my requirement is to restrict date field in vf01 to system date .
    i have changed the 011 routine in vtfa .
    do I need any extra effort
    debajyoti

    Hi debajyothi
    First of all which date field you want to restrict to systems date can you be more specific debajyothi
    But In VOV8 , there is a pricing  date field  , if you customize it as per your requirement , like if you keep it blank then it will be systems date , or billing date , delivery date etc this can be one input if it is related to pricing
    Even as you said in copy controls if you change the sub- routine then it will work
    Regards
    Srinath

  • How to make the Deprtmnt field in the cost center master data as required ?

    Dear Experts,
    I want to make the Department field in the cost center master data as required field.....how do i do it?
    regards
    Suresh

    Hi Eli,
    Thanks for the quick reply
    while creating the Cost center itself the field should come as required field........can that be met with this enhancement?. Because the transaction code being used int the enhancement is for change mode but i want this feature in  create mode itself.
    thanks
    regards
    Suresh

Maybe you are looking for