How to make buttons as disable based on radio button selection in .htm

Hi
I have two radio buttons. So i want that when i select one radio button other buttons should become disable in
.htm in crm webui.
Thanx,
Nawal kishore.

I am not sure why u need this .. but if you disable the radio button, user won't be able to change the radio buttons any more!!!
You can do it in this way.
1. go to the radio button attribute of the context node ..
if get_p_xxxx method is present then modify that to include the below code. If not present create the method. see any standard method
CASE iv_property.
WHEN if_bsp_wd_model_setter_getter=>fp_server_event.
rv_value = 'selected'. "remember case
endcase.
2. create a event with the name 'selected'. "" case is important
3. check in do_handle_event if the event is created or not..." if there is not event added in that method, you need to add your method name there...
4. set some flag in the event method which you have to access from the get_i_XXX method(XXX is the radio button attribute).
depending on the flag you make it disable.

Similar Messages

How to make some fields mandatory based on radio button selected

Hi,
As per requirement i have two radio buttons in my screen.
1.update
2.Display.
When the user clicks update then certain fields of selection screen should be made mandatory.
And if the user cliks the Display Radio Button then certain fields should be made mandatory.
How to code for it.
Thanks and Regards,
Smriti

Hi ,
use this code ,
now according to your requirement you make changes to your parameters.
parameters: r1 as radiobutton group g1, " this id you update button
            r2 as radiobutton group g1.         " this is for display
PARAMETERS: TEST1(10) MODIF ID SC1, " assume these are the fields as parameters.
TEST2(10) MODIF ID SC2,
TEST3(10) MODIF ID SC1,
TEST4(10) MODIF ID SC2.
AT SELECTION-SCREEN OUTPUT.
if g1 = 'X'.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'SC1'.
    SCREEN-INTENSIFIED = '1'.
    MODIFY SCREEN.
    CONTINUE.
ENDIF.
IF SCREEN-GROUP1 = 'SC2'.
    SCREEN-INTENSIFIED = '0'.
    MODIFY SCREEN.
ENDIF.
ENDLOOP.
elseif g2 = 'X'.
LOOP AT SCREEN.
IF SCREEN-GROUP1 = 'SC1'.
    SCREEN-INTENSIFIED = '1'.
    MODIFY SCREEN.
    CONTINUE.
ENDIF.
IF SCREEN-GROUP1 = 'SC2'.
    SCREEN-INTENSIFIED = '0'.
    MODIFY SCREEN.
ENDIF.
ENDLOOP.
Please let me know if you still need any help.
Thanks and regards,
Rajeshwar

Enable/disable/defaulting the radio button in tabular Form

Hi friends,
I have one radio button column in my tabular form with 3 values for it.
<li>FC
<li>BC
<li>EC
I need to enable/disable the radio buttons according to the position of the user.
If the position of the user is CEO means,
then FC radio button has to be checked defaultly and also for him he needs to have BC and EC radio buttons to be enabled.
If the position of the user is between(1-4) grades means,
then FC radio button has to be disabled, but BC radio button has to be checked defaultly and also for him he needs to have EC radio buttons to be enabled.
If the position of the user is between(4-6) grades means,
then FC, BC radio button has to be disabled, but EC radio button has to be checked defaultly.
How i can achieve this radio button enabling/disabling and defaulting it dynamically according to the user.
Where i need to specify this kind of restriction inorder to work for me in my application.
Brgds,
Mini

Hi Bob,
thanks for your reply first, and your suggestion too.
I tried in the below manner on the lov definition of my radio button and it hide/shown according to the user who logs into the application.
SELECT 'FC' d, 'FC' r FROM DUAL WHERE lower(:APP_USER) = (select lower(user_name) from apps.xxhy_ams_details_v where upper(job_name) = 'CEO')
UNION ALL
SELECT 'BC' d, 'BC' r FROM DUAL WHERE lower(:APP_USER) IN (select lower(user_name) from apps.xxhy_ams_details_v where grade_name
BETWEEN 1 and 4 OR lower(:APP_USER) = (select lower(user_name) from apps.xxhy_ams_details_v where upper(job_name) = 'CEO'))
UNION ALL
SELECT 'EC' d, 'EC' r FROM DUALBut how i can check the radio button defaultly according to the user who logs in .
<li> If the employee with the position CEO logs into the application means, he needs to have FC to be checked defaultly.
<li> If the employee with the grade between(1-4) logs into the application means, he needs to have BC to be checked defaultly.
<li> If the employee with the grade between(5-12) logs into the application means, he needs to have EC to be checked defaultly.
Note:
Instead of hide/show the radio buttons defaultly whether it is possible to enable/disable the radio button according to the user who logs into the application.
Brgds,
Mini...

How to raise pop up window along with radio buttons in module pool program

how to raise pop up window along with radio buttons in module pool program

FUNCTION zscheme_determination.
*"*"Local Interface:
*" IMPORTING
*"     REFERENCE(I_KUNNR) TYPE KUNNR
*" EXPORTING
*"     REFERENCE(E_VALUE) TYPE NETWR_AK
*" TABLES
*"      G_ITEM_DATA_ITAB STRUCTURE ZITEM_DATA
* TYPES: BEGIN OF ty_sord,
*         include type ZSD_SCHEME_DTL,
*         END   OF ty_sord.
* data : gt_sord type standard table of ZSD_SCHEME_DTL,
*         wa_sord type ZSD_SCHEME_DTL.
* select * from ZSD_SCHEME_DTL into table
* gt_sord
* where matnr = i_matnr.
* T_ITEM_DATA
*********Data Declarations
   DATA:
         salesdocumentin LIKE bapivbeln-vbeln,
         orderheaderin LIKE bapisdhd1,
         orderheaderinx LIKE bapisdhd1x,
         sender LIKE bapi_sender,
         binaryrelationshiptype LIKE bapireltype-reltype,
         intnumberassignment LIKE bapiflag-bapiflag,
         behavewhenerror LIKE bapiflag-bapiflag,
         logicswitch LIKE bapisdls,
         testrun LIKE bapiflag-bapiflag,
         convert LIKE bapiflag-bapiflag,
         return LIKE bapiret2 OCCURS 0,
         orderitemsin LIKE bapisditm OCCURS 0,
         orderitemsinx LIKE bapisditmx OCCURS 0,
         orderpartners LIKE bapiparnr OCCURS 0,
         orderschedulesin LIKE bapischdl OCCURS 0,
         orderschedulesinx LIKE bapischdlx OCCURS 0,
         orderconditionsin LIKE bapicond OCCURS 0,
         orderconditionsinx LIKE bapicondx OCCURS 0,
         ordercfgsref LIKE bapicucfg OCCURS 0,
         ordercfgsinst LIKE bapicuins OCCURS 0,
         ordercfgspartof LIKE bapicuprt OCCURS 0,
         ordercfgsvalue LIKE bapicuval OCCURS 0,
         ordercfgsblob LIKE bapicublb OCCURS 0,
         ordercfgsvk LIKE bapicuvk OCCURS 0,
         ordercfgsrefinst LIKE bapicuref OCCURS 0,
         orderccard LIKE bapiccard OCCURS 0,
         ordertext LIKE bapisdtext OCCURS 0,
         orderkeys LIKE bapisdkey OCCURS 0,
         extensionin LIKE bapiparex OCCURS 0,
         partneraddresses LIKE bapiaddr1 OCCURS 0.
   DATA : wa_orderpartners LIKE bapiparnr,
          wa_orderitemsin LIKE bapisditm,
          wa_orderitemsinx LIKE bapisditmx,
          wa_orderschedulesin LIKE bapischdl,
          wa_orderschedulesinx LIKE bapischdlx,
          wa_orderconditionsin LIKE bapicond,
          wa_orderconditionsinx LIKE bapicondx,
          wa_return LIKE bapiret2,
          lv_value TYPE netwr_ak.
   DATA : lv_dtyp TYPE char45,
          lv_sorg TYPE vkorg,
          lv_sdch TYPE vtweg,
          lv_sdiv TYPE spart.
   TYPES : BEGIN OF ty_sord,
           zsdscheme TYPE comt_scheme_id,
           posnr TYPE posnr_va,
           matnr TYPE matnr,
           disc_type TYPE rebate_disc_type,
           calc_type TYPE catyp,
           qty_from TYPE kwmeng,
           qty_to TYPE kwmeng,
           spart TYPE spart,
           custcondgrp TYPE kdkg1,
           werks TYPE werks_d,
           matmn TYPE matnr,
           END   OF ty_sord.
   DATA : gt_sord   TYPE STANDARD TABLE OF ty_sord,
          gt_sordd TYPE STANDARD TABLE OF ty_sord,
          wa_sord TYPE ty_sord,
          wa_knvv TYPE knvv,
          lv_cal_foc TYPE p DECIMALS 3,
          lv_cal_dis TYPE p DECIMALS 3,
          lv_new_qty TYPE kwmeng,
          lv_posmat TYPE posnr_va,
          lv_posfoc TYPE posnr_va.
   DATA:lv_diff TYPE kwmeng.
******Schemes Selection Logic
* Get Valid Schemes
* Validate Scheme for validity Period, Material, Customer Type and Plant
   TYPES : BEGIN OF ty_rtab,
           sign   TYPE c LENGTH 1,
           option TYPE c LENGTH 2,
           low    LIKE mara-matnr,
           high   LIKE mara-matnr,
         END OF ty_rtab.
* TYPES : ty_matnr TYPE RANGE OF ty_rtab.
   DATA : it_matnr TYPE TABLE OF ty_rtab,
          wa_matnr TYPE ty_rtab,
          wa_it    TYPE zitem_data,
         wa_tab TYPE zitem_data.
*order table declaration
   TYPES:
         BEGIN OF ty_order,
           zsdscheme TYPE comt_scheme_id,
           matnr     TYPE matnr,
           kwmeng    TYPE kwmeng,
         END OF ty_order,
   BEGIN OF ty_scheme,
    zsdscheme TYPE comt_scheme_id,
*                matnr     TYPE matnr,
    kwmeng    TYPE kwmeng,
END OF ty_scheme.
   DATA:
         gt_order      TYPE TABLE OF ty_order,
         gt_scheme     TYPE TABLE OF ty_scheme,
          wa_scheme    TYPE ty_scheme,
          wa_order     TYPE ty_order.
   DATA:i_kwmeng TYPE kwmeng.
* Transfer all the material received from order to internal table
   LOOP AT g_item_data_itab INTO wa_it.
     MOVE : wa_it-matnr TO wa_matnr-low,
            'I'          TO wa_matnr-sign,
            'EQ'         TO wa_matnr-option.
     APPEND wa_matnr TO it_matnr.
     CLEAR wa_it.
   ENDLOOP.
* Get the Valid Schemes based on given criteria
   SELECT
           zsd_scheme_dtl~zsdscheme
           zsd_scheme_dtl~posnr
           zsd_scheme_dtl~matnr
           zsd_scheme_dtl~disc_type
           zsd_scheme_dtl~calc_type
           zsd_scheme_dtl~qty_from
           zsd_scheme_dtl~qty_to
           zsd_scheme~spart
           zsd_scheme_hdr~custcondgrp
           zsd_scheme_hdr~werks
           zsd_scheme_hdr~matnr
   FROM zsd_scheme_hdr
   INNER JOIN zsd_scheme ON zsd_scheme~zsdscheme = zsd_scheme_hdr~zsdscheme
   INNER JOIN zsd_scheme_dtl ON zsd_scheme_dtl~zsdscheme = zsd_scheme_hdr~zsdscheme
   INTO TABLE gt_sord
   WHERE zsd_scheme_dtl~matnr IN it_matnr
*    zsd_scheme_hdr~matnr IN it_matnr
*    AND zsd_scheme_hdr~werks = '1509'
     AND zsd_scheme_hdr~werks = '1529'
     AND zsd_scheme_hdr~custcondgrp = '01'
     AND zsd_scheme~datuv LE sy-datum
     AND zsd_scheme~datub GE sy-datum.
   SORT gt_sord BY zsdscheme ASCENDING.
* LOOP AT gt_sord INTO wa_sord.
*    READ TABLE g_item_data_itab INTO wa_it WITH KEY matnr = wa_sord-matnr.
*    wa_order-zsdscheme = wa_sord-zsdscheme.
*    wa_order-matnr = wa_it-matnr.
*    wa_order-kwmeng = wa_it-kwmeng.
*    COLLECT wa_order INTO gt_order.
*    CLEAR wa_order.
* ENDLOOP.
   LOOP AT g_item_data_itab INTO wa_it.
     READ TABLE gt_sord INTO wa_sord WITH KEY matnr = wa_it-matnr.
     wa_order-zsdscheme = wa_sord-zsdscheme.
     wa_order-matnr = wa_it-matnr.
     wa_order-kwmeng = wa_it-kwmeng.
     COLLECT wa_order INTO gt_order.
     MOVE : wa_sord-zsdscheme TO wa_scheme-zsdscheme,
            wa_it-kwmeng TO wa_scheme-kwmeng.
     COLLECT wa_scheme INTO gt_scheme.
     CLEAR : wa_order, wa_scheme.
   ENDLOOP.
   CLEAR wa_scheme.
   DATA w_line TYPE sy-tabix.
* Updating table based on Schemes
   LOOP AT gt_scheme INTO wa_scheme.
     CLEAR w_line.
     gt_sordd[] = gt_sord[].
*    DELETE gt_sordd WHERE zsdscheme NE wa_scheme-zsdscheme and disc_type NE 'FOC'.
     DELETE gt_sordd WHERE zsdscheme NE wa_scheme-zsdscheme AND disc_type NE 'F'.
     DELETE ADJACENT DUPLICATES FROM gt_sordd COMPARING zsdscheme matnr.
     DESCRIBE TABLE gt_sordd LINES w_line.
     IF w_line GT 1.
* popup message to select one foc type.
     ELSE.
       CLEAR wa_sord.
       READ TABLE gt_sordd INTO wa_sord INDEX 1.
       IF sy-subrc EQ 0.
         i_kwmeng = wa_scheme-kwmeng.
         lv_cal_foc = i_kwmeng DIV wa_sord-qty_from.
         lv_cal_dis = i_kwmeng MOD wa_sord-qty_from.
         MOVE : lv_cal_foc TO wa_it-kwmeng,
                wa_sord-matnr TO wa_it-matnr.
         APPEND wa_it TO g_item_data_itab.
         SORT gt_order BY kwmeng DESCENDING.
         LOOP AT gt_order INTO wa_order WHERE zsdscheme = wa_scheme-zsdscheme.
           IF lv_cal_dis GT 0.
*        LOOP AT gt_order INTO wa_order WHERE zsdscheme = wa_scheme-zsdscheme
*                                             AND lv_cal_dis GT 0.
*                  LOOP AT gt_order INTO wa_order WHERE zsdscheme = wa_scheme-zsdscheme.
*                LOOP AT g_item_data INTO wa_item_data WHERE matnr EQ wa_order-matnr.
                     LOOP AT g_item_data_itab INTO wa_tab WHERE matnr EQ wa_order-matnr.
                       wa_orderconditionsin-itm_number = wa_tab-posnr.
*                  wa_orderconditionsin-itm_number = wa_item_data-posnr.
                       wa_orderconditionsin-cond_st_no = '001'.
*                  IF gt_sordd-calc EQ ‘post AND disc_type EQ ‘percentage’.
                       IF wa_sord-calc_type EQ 'O' AND wa_sord-disc_type EQ 'P'.
                         wa_orderconditionsin-cond_type = 'ZTPB'.   "'ZREG'.
*                  ELSEIF gt_sordd-calc EQ ‘pre’ AND disc_type EQ ‘percentage’
                       ELSEIF wa_sord-calc_type EQ 'E' AND wa_sord-disc_type EQ 'P'.
                         wa_orderconditionsin-cond_type = 'ZTPP'.   "'ZREG'.
                       ENDIF.
                       wa_orderconditionsin-currency = 'INR'.
                       wa_orderconditionsin-conpricdat = sy-datum.
                       APPEND wa_orderconditionsin TO orderconditionsin.
                       CLEAR wa_orderconditionsin.
*Update Discount Conditon
                     ENDLOOP.
*                  ENDLOOP.
*Modify balance of Item
             CLEAR wa_tab.
             READ TABLE g_item_data_itab INTO wa_tab WITH KEY matnr = wa_order-matnr.
             IF sy-subrc EQ 0.
               lv_diff = wa_tab-kwmeng - lv_cal_dis.
               IF lv_diff GT 0.
                 wa_tab-kwmeng = wa_tab-kwmeng - lv_cal_dis.
*            MODIFY g_item_data TRANSPORTING kwmeng index sy-tabix.
                 MODIFY g_item_data_itab INDEX sy-tabix FROM wa_tab TRANSPORTING kwmeng .
               ELSE.
                 wa_tab-kwmeng = lv_cal_dis.
                 lv_cal_dis = lv_diff.
                 MODIFY g_item_data_itab INDEX sy-tabix FROM wa_tab TRANSPORTING kwmeng .
*            MODIFY G_ITEM_DATA_ITAB TRANSPORTING kwmeng index sy-tabix.
               ENDIF.
               gt_sordd[] = gt_sord[].
               DELETE gt_sordd WHERE zsdscheme NE wa_scheme-zsdscheme AND disc_type EQ 'F'.
               DESCRIBE TABLE gt_sordd LINES w_line.
               IF w_line GT 1.
                 SORT gt_sordd BY zsdscheme DESCENDING.
*              SORT gt_sordd BY quantity DESCENDING.
                 CLEAR wa_sord.
*              LOOP AT gt_sordd WHERE quantity_from LT wa_shceme-kwmeng AND quantity_to GT wa_shceme-kwmeng.
                 LOOP AT gt_sordd INTO wa_sord WHERE qty_from LT wa_scheme-kwmeng AND qty_to GT wa_scheme-kwmeng.
*             LOOP AT gt_order INTO wa_order WHERE scheme = wa_scheme-scheme.
                   LOOP AT gt_order INTO wa_order WHERE zsdscheme = wa_scheme-zsdscheme.
*                LOOP AT g_item_data INTO wa_item_data WHERE matnr EQ wa_order-matnr.
                     LOOP AT g_item_data_itab INTO wa_tab WHERE matnr EQ wa_order-matnr.
                       wa_orderconditionsin-itm_number = wa_tab-posnr.
*                  wa_orderconditionsin-itm_number = wa_item_data-posnr.
                       wa_orderconditionsin-cond_st_no = '001'.
*                  IF gt_sordd-calc EQ ‘post AND disc_type EQ ‘percentage’.
                       IF wa_sord-calc_type EQ 'O' AND wa_sord-disc_type EQ 'P'.
                         wa_orderconditionsin-cond_type = 'ZDPD'.   "'ZREG'.
*                  ELSEIF gt_sordd-calc EQ ‘pre’ AND disc_type EQ ‘percentage’
                       ELSEIF wa_sord-calc_type EQ 'E' AND wa_sord-disc_type EQ 'P'.
                         wa_orderconditionsin-cond_type = 'ZDPD'.   "'ZREG'.
                       ENDIF.
                       wa_orderconditionsin-currency = 'INR'.
                       wa_orderconditionsin-conpricdat = sy-datum.
                       APPEND wa_orderconditionsin TO orderconditionsin.
                       CLEAR wa_orderconditionsin.
*Update Discount Conditon
                     ENDLOOP.
                   ENDLOOP.
                 ENDLOOP.
               ELSE.
               ENDIF.
             ENDIF.
           ENDIF.
         ENDLOOP.
       ENDIF.
     ENDIF.
   ENDLOOP.
* select
*          ZSD_SCHEME_DTL~ZSDSCHEME
*          ZSD_SCHEME_DTL~POSNR
*          ZSD_SCHEME_DTL~matnr
*          ZSD_SCHEME_DTL~DISC_TYPE
*          ZSD_SCHEME_DTL~CALC_TYPE
*          ZSD_SCHEME_DTL~QTY_FROM
*          ZSD_SCHEME_DTL~QTY_TO
*          ZSD_SCHEME~SPART
*          ZSD_SCHEME_HDR~CUSTCONDGRP
*          ZSD_SCHEME_HDR~WERKS
*          ZSD_SCHEME_HDR~MATNR
* from ZSD_SCHEME_DTL
* inner join ZSD_SCHEME on ZSD_SCHEME~ZSDSCHEME = ZSD_SCHEME_DTL~ZSDSCHEME
* inner join ZSD_SCHEME_HDR on ZSD_SCHEME_HDR~ZSDSCHEME = ZSD_SCHEME_DTL~ZSDSCHEME
* into table
* gt_sord
* where ZSD_SCHEME_DTL~matnr = i_matnr and
*        ZSD_SCHEME~DATUV LE sy-datum and
*        ZSD_SCHEME~DATUB GE sy-datum.
* break-point.
* Process Common Logic for Schemes Processcing
   CLEAR wa_sord.
* Convert FOC Quantity and Materials
* LOOP AT gt_sord INTO wa_sord.
**   lv_cal = i_kwmeng / wa_sord-QTY_FROM.
*    lv_cal_foc = i_kwmeng DIV wa_sord-qty_from.
*    lv_cal_dis = i_kwmeng MOD wa_sord-qty_from.
* ENDLOOP.
*lv_new_qty = i_kwmeng - lv_cal_dis.
* Get the Sales Document Type
   SELECT SINGLE low
FROM tvarvc
INTO lv_dtyp WHERE
name = 'SD_DOC_TYPE'.
   SELECT SINGLE * FROM knvv INTO wa_knvv WHERE kunnr = i_kunnr.
   IF sy-subrc = 0.
     lv_sorg = wa_knvv-vkorg.
     lv_sdch = wa_knvv-vtweg.
     lv_sdiv = wa_knvv-spart.
   ENDIF.
* Give the Popup for schemes with multiple FOC
* Schemes Specific Processing
* Schemes Specific Processing
   orderheaderin-doc_type = lv_dtyp.
   orderheaderin-sales_org = lv_sorg.
   orderheaderin-distr_chan = lv_sdch.
   orderheaderin-division = lv_sdiv.
   wa_orderpartners-partn_role = 'AG'.
   wa_orderpartners-partn_numb = i_kunnr.
   APPEND wa_orderpartners TO orderpartners.
*    wa_ORDERPARTNERS-PARTN_ROLE = 'WE'.
*    wa_ORDERPARTNERS-PARTN_NUMB = p_ship.
*    append wa_ORDERPARTNERS to ORDERPARTNERS.
* Item number begin
   CLEAR : lv_posmat.
   lv_posmat = lv_posmat + 10.
   wa_orderitemsin-itm_number = lv_posmat.
   wa_orderitemsin-material = wa_sord-matmn. "i_matnr.
   wa_orderitemsin-target_qty = lv_new_qty.
* wa_ORDERITEMSIN-TARGET_QU = i_VRKME.
   APPEND wa_orderitemsin TO orderitemsin.
   wa_orderitemsinx-itm_number = lv_posmat.
   wa_orderitemsinx-material = 'X'.
   wa_orderitemsinx-target_qty = 'X'.
   wa_orderitemsinx-target_qu = 'X'.
   APPEND wa_orderitemsinx TO orderitemsinx.
   wa_orderschedulesin-itm_number = lv_posmat.
   wa_orderschedulesin-sched_line = lv_posmat.
   wa_orderschedulesin-req_qty = lv_new_qty.
   APPEND wa_orderschedulesin TO orderschedulesin.
   wa_orderschedulesinx-itm_number = lv_posmat.
   wa_orderschedulesinx-sched_line = lv_posmat.
   wa_orderschedulesinx-req_qty = 'X'.
   wa_orderschedulesinx-updateflag = 'X'.
   APPEND wa_orderschedulesinx TO orderschedulesinx.
   wa_orderconditionsin-itm_number = lv_posmat.
   wa_orderconditionsin-cond_st_no = '001'.
   wa_orderconditionsin-cond_type = 'ZDPD'.   "'ZREG'.
   wa_orderconditionsin-currency = 'INR'.
   wa_orderconditionsin-conpricdat = sy-datum.
   APPEND wa_orderconditionsin TO orderconditionsin.
   wa_orderconditionsinx-itm_number = lv_posmat.
   wa_orderconditionsinx-cond_st_no = '001'.
   wa_orderconditionsinx-cond_type = 'ZDPD'. "'ZREG'.
   wa_orderconditionsinx-updateflag = 'X'.
   wa_orderconditionsinx-cond_value ='X'.
   wa_orderconditionsinx-currency = 'X'.
   APPEND wa_orderconditionsinx TO orderconditionsinx.
****18/06Beg
* if not lv_cal_dis is initial.
*    lv_posmat = lv_posmat + 10.
*    wa_ORDERITEMSIN-ITM_NUMBER = lv_posmat.
*    wa_ORDERITEMSIN-MATERIAL = WA_SORD-MATMN. "i_matnr.
*    wa_ORDERITEMSIN-TARGET_QTY = lv_cal_dis.
** wa_ORDERITEMSIN-TARGET_QU = i_VRKME.
*    append wa_ORDERITEMSIN to ORDERITEMSIN.
*    wa_ORDERITEMSINX-ITM_NUMBER = lv_posmat.
*    wa_ORDERITEMSINX-MATERIAL = 'X'.
*    wa_ORDERITEMSINX-TARGET_QTY = 'X'.
*    wa_ORDERITEMSINX-TARGET_QU = 'X'.
*    append wa_ORDERITEMSINX to ORDERITEMSINX.
*    wa_ORDERSCHEDULESIN-ITM_NUMBER = lv_posmat.
*    wa_ORDERSCHEDULESIN-SCHED_LINE = lv_posmat.
*    wa_ORDERSCHEDULESIN-REQ_QTY = lv_cal_dis.
*    append wa_ORDERSCHEDULESIN to ORDERSCHEDULESIN.
*    wa_ORDERSCHEDULESINX-itm_number = lv_posmat.
*    wa_ORDERSCHEDULESINX-sched_line = lv_posmat.
*    wa_ORDERSCHEDULESINX-req_qty = 'X'.
*    wa_ORDERSCHEDULESINX-updateflag = 'X'.
*    append wa_ORDERSCHEDULESINX to ORDERSCHEDULESINX.
* endif.
* lv_posmat = lv_posmat + 10.
* wa_ORDERITEMSIN-ITM_NUMBER = lv_posmat.
* wa_ORDERITEMSIN-MATERIAL = i_matnr. "WA_SORD-MATMN.
* wa_ORDERITEMSIN-TARGET_QTY = LV_CAL_FOC.
* wa_ORDERITEMSIN-ITEM_CATEG = 'ZDGN'.
** wa_ORDERITEMSIN-TARGET_QU = i_VRKME.
* append wa_ORDERITEMSIN to ORDERITEMSIN.
* wa_ORDERITEMSINX-ITM_NUMBER = lv_posmat.
* wa_ORDERITEMSINX-MATERIAL = 'X'.
* wa_ORDERITEMSINX-TARGET_QTY = 'X'.
* wa_ORDERITEMSINX-TARGET_QU = 'X'.
* wa_ORDERITEMSINX-ITEM_CATEG = 'X'.
* append wa_ORDERITEMSINX to ORDERITEMSINX.
* wa_ORDERSCHEDULESIN-ITM_NUMBER = lv_posmat.
* wa_ORDERSCHEDULESIN-SCHED_LINE = lv_posmat.
* wa_ORDERSCHEDULESIN-REQ_QTY = LV_CAL_FOC.
* append wa_ORDERSCHEDULESIN to ORDERSCHEDULESIN.
* wa_ORDERSCHEDULESINX-itm_number = lv_posmat.
* wa_ORDERSCHEDULESINX-sched_line = lv_posmat.
* wa_ORDERSCHEDULESINX-req_qty = 'X'.
* wa_ORDERSCHEDULESINX-updateflag = 'X'.
* append wa_ORDERSCHEDULESINX to ORDERSCHEDULESINX.
****18/06End
* Item number end
* Switch off dialog (BAPIs always run without)
   CALL FUNCTION 'DIALOG_SET_NO_DIALOG'.
   CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
     EXPORTING
*     SALESDOCUMENTIN               =
     order_header_in               = orderheaderin
*     ORDER_HEADER_INX              =
*     SENDER                        =
*     BINARY_RELATIONSHIPTYPE       =
*     INT_NUMBER_ASSIGNMENT         =
*     BEHAVE_WHEN_ERROR             =
*     LOGIC_SWITCH                  =
*     TESTRUN                       =
*     CONVERT                       = ' '
*   IMPORTING
*     SALESDOCUMENT                 =
   TABLES
     return                        = return
     order_items_in                = orderitemsin
     order_items_inx               = orderitemsinx
     order_partners                = orderpartners
     order_schedules_in            = orderschedulesin
     order_schedules_inx           = orderschedulesinx
     order_conditions_in           = orderconditionsin
     order_conditions_inx          = orderconditionsinx
*     ORDER_CFGS_REF                =
*     ORDER_CFGS_INST               =
*     ORDER_CFGS_PART_OF            =
*     ORDER_CFGS_VALUE              =
*     ORDER_CFGS_BLOB               =
*     ORDER_CFGS_VK                 =
*     ORDER_CFGS_REFINST            =
*     ORDER_CCARD                   =
*     ORDER_TEXT                    =
*     ORDER_KEYS                    =
*     EXTENSIONIN                   =
*     PARTNERADDRESSES              =
*    commit work.
   CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
*     EXPORTING
*       WAIT          =
*     IMPORTING
*       RETURN        =
   LOOP AT return INTO wa_return.
     WRITE:/ wa_return-message.
   ENDLOOP.
ENDFUNCTION.
*& Include ZSD_SO_CHANGES2_TOP                               Module Pool      ZSD_SO_CHANGES2
PROGRAM ZSD_SO_CHANGES2.
***&SPWIZARD: DATA DECLARATION FOR TABLECONTROL 'ITEM_DATA'
*&SPWIZARD: DEFINITION OF DDIC-TABLE
TABLES:   VBAP,kna1.
*&SPWIZARD: TYPE FOR THE DATA OF TABLECONTROL 'ITEM_DATA'
TYPES: BEGIN OF T_ITEM_DATA,
          POSNR LIKE VBAP-POSNR,
          MATNR LIKE VBAP-MATNR,
          KWMENG LIKE VBAP-KWMENG,
          VRKME LIKE VBAP-VRKME,
        END OF T_ITEM_DATA.
*&SPWIZARD: INTERNAL TABLE FOR TABLECONTROL 'ITEM_DATA'
DATA:     G_ITEM_DATA_ITAB   TYPE T_ITEM_DATA OCCURS 0,
           G_ITEM_DATA_WA     TYPE T_ITEM_DATA. "work area
DATA:     G_ITEM_DATA_COPIED.           "copy flag
*&SPWIZARD: DECLARATION OF TABLECONTROL 'ITEM_DATA' ITSELF
CONTROLS: ITEM_DATA TYPE TABLEVIEW USING SCREEN 4000.
DATA:GV_NUM TYPE I VALUE 1,
       GV_NUM2 TYPE I.
DATA:     G_T_YREC_TAB_LINES LIKE SY-LOOPC.***********top*************
*& Include ZSD_SO_CHANGES2_TOP                               Module Pool      ZSD_SO_CHANGES2
PROGRAM ZSD_SO_CHANGES2.
***&SPWIZARD: DATA DECLARATION FOR TABLECONTROL 'ITEM_DATA'
*&SPWIZARD: DEFINITION OF DDIC-TABLE
TABLES:   VBAP,kna1.
*&SPWIZARD: TYPE FOR THE DATA OF TABLECONTROL 'ITEM_DATA'
TYPES: BEGIN OF T_ITEM_DATA,
          POSNR LIKE VBAP-POSNR,
          MATNR LIKE VBAP-MATNR,
          KWMENG LIKE VBAP-KWMENG,
          VRKME LIKE VBAP-VRKME,
        END OF T_ITEM_DATA.
*&SPWIZARD: INTERNAL TABLE FOR TABLECONTROL 'ITEM_DATA'
DATA:     G_ITEM_DATA_ITAB   TYPE T_ITEM_DATA OCCURS 0,
           G_ITEM_DATA_WA     TYPE T_ITEM_DATA. "work area
DATA:     G_ITEM_DATA_COPIED.           "copy flag
*&SPWIZARD: DECLARATION OF TABLECONTROL 'ITEM_DATA' ITSELF
CONTROLS: ITEM_DATA TYPE TABLEVIEW USING SCREEN 4000.
DATA:GV_NUM TYPE I VALUE 1,
       GV_NUM2 TYPE I.
DATA:     G_T_YREC_TAB_LINES LIKE SY-LOOPC.
************************pbo*******************
*& Include           ZSD_SO_CHANGES2_PBO
*&SPWIZARD: OUTPUT MODULE FOR TC 'ITEM_DATA'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: COPY DDIC-TABLE TO ITAB
MODULE ITEM_DATA_INIT OUTPUT.
   IF G_ITEM_DATA_COPIED IS INITIAL.
*&SPWIZARD: COPY DDIC-TABLE 'VBAP'
*&SPWIZARD: INTO INTERNAL TABLE 'g_ITEM_DATA_itab'
*    SELECT * FROM VBAP
*       INTO CORRESPONDING FIELDS
*       OF TABLE G_ITEM_DATA_ITAB.
*    G_ITEM_DATA_COPIED = 'X'.
     REFRESH CONTROL 'ITEM_DATA' FROM SCREEN '4000'.
   ENDIF.
   ITEM_DATA-LINES = G_T_YREC_TAB_LINES + 15.
ENDMODULE.
*&SPWIZARD: OUTPUT MODULE FOR TC 'ITEM_DATA'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: MOVE ITAB TO DYNPRO
MODULE ITEM_DATA_MOVE OUTPUT.
   MOVE-CORRESPONDING G_ITEM_DATA_WA TO VBAP.
ENDMODULE.
*&      Module STATUS_4000 OUTPUT
*       text
MODULE STATUS_4000 OUTPUT.
   SET PF-STATUS 'APAR'.
* REFRESH G_ITEM_DATA_ITAB.
    GV_NUM = 1.
* SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_4000 OUTPUT

How to apply a css style to a radio button.

I cannot seem to persuade jsf to pass css styles through to a radio button.
I have markup like this:
<h:selectOneRadio id="direction" styleClass="largish-form" >
<f:selectItem id="positive" itemLabel="positive" itemValue="positive" />
<f:selectItem id="negative" itemLabel="negative" itemValue="negative" />
</h:selectOneRadio>Which gets transformed into something like:

<td>
<label>
<input type="radio" name="comp-amount-form:direction" value="positive" class="largish-form" />
positive
</label>
</td>So the style does not get applied to the text of the label. I was expecting something like
<span class="largish-form"> positive</span>.So how do I get styled labels on my radio buttons?
Thanks in advance.

For a standard Portal page you should use the Portal styles and associate them to a page. These effectively generate a CSS style sheet anyway if you view the HTML source of a rendered page in your browser.
Using the correct PDK APIs you effectively reference the CSS tags in your Java or PL/SQL code.
If your portlet need to open a page in a new window you can no longer reference the Portal page style as the CSS style sheet does not get attached.
In this situation, code your HTML as normal and reference your CSS style sheets as normal.
If you create you CSS sheet you can store it in a page as a file and access using the direct access URL like I showed you in a previous response regarding the storing of images.
Cheers,
John

How can I change the slide to 8 Radio buttons mutually exclusive?

How can I change the slide to 8 Radio buttons mutually exclusive?
I saw the example in Labview. but it only contains upto 5 radio
buttons. I need 8. How can I change it? Is there any shortcuts?

I made this with NI's radio button control found in the boolean palette. Just resize the cluster border, and move the buttons to where you want. To add a button, select one of them, hold down Control and Shift keys, then drag the button to a new location. The button gets duplicated. Do this until you have enough buttons.
Message Edited by tbob on 10-31-2005 01:07 PM
- tbob
Inventor of the WORM Global
Attachments:
RadioButtons.PNG ‏2 KB

How to set button disabled wile processing radio button request.

Hi,
I have one panel gropu layout and inside that i am displaying radio buttons, select many check box and save button. Actually on change of radio button selection based on the value selected i am seltting some values selected in select many check box. the problem here is when we are changing selection for radio button and while it is in processing user can click on save button. so until the radio button change is complete we want to disable save button and once process is complete we want to enable save button.
Please help me on this.
Thanks in advance.

Hi,
try this
<af:resource type="javascript">
        function enforcePreventUserInput(evt) {
            var popup = AdfPage.PAGE.findComponentByAbsoluteId('popupBusyPage');
            if (popup != null) {
                AdfPage.PAGE.addBusyStateListener(popup, handleBusyState);
                evt.preventUserInput();
        function handleBusyState(evt) {
            var popup = AdfPage.PAGE.findComponentByAbsoluteId('popupBusyPage');
            if (popup != null) {
                if (evt.isBusy()) {
                    popup.show();
                else {
                    popup.hide();
                    AdfPage.PAGE.removeBusyStateListener(popup, handleBusyState);
      </af:resource>
<af:popup id="popupBusyPage" animate="false" contentDelivery="immediate"
                  autoCancel="disabled">
          <af:panelWindow id="d2" closeIconVisible="false" modal="false"
                          title="Processing"
                          titleIconSource="/images/processWind_ena.png"
                          contentHeight="10">
            <af:panelGroupLayout layout="horizontal" id="pgl2" halign="center">
              <af:image source="/images/process_animation_blafplus.gif" id="i1"/>
            </af:panelGroupLayout>
          </af:panelWindow>
        </af:popup>add client listener tag to radiobutton
<af:clientListener method="enforcePreventUserInput" type="valueChange"/>
How-to show a glasspane and splash screen for long running queries
Regards,
Edited by: Santosh Vaza on Aug 13, 2012 12:02 PM

How to make some fields disable mode in BAPI?

Dear sir,
I want to know in Bapi, In Import parameters of output display screen as we are entering values i want to make some fields disable mode (as in report program, in output screen, suppose 2 entry fields are der so i need only one and another one in disable mode)how to do in BAPI? please explain with example by taking 2 or 3 predefined tables? and in Bapi how to do ranges programs.. please explain with example? is it posiible in bapi to display the output in ALV_GRID method?
regards
patil

Hi Rachu Patil,
I think there is no posibility to disable fields in import parameter of bapi but you can select optional check box to make the field as an optional field in import parameter. Like wise you cant set range. If you want to set range than declare two variable for low and high.
Regards,
Harish

How to hide parameters AUTOMATICLY based on radio buttons being pressed

I have multiple radio buttons and with each radio button I have parameters that appear on screen for user to enter data.   Is there a way to make the selection blocks appear and disappear automatily based on the user pressing the radio button?
My current coed works only if I press the enter key but not automatily when the radio button is pressed.

hi, have a look this example, it works as u want.
SELECTION-SCREEN BEGIN OF BLOCK blk2 WITH FRAME TITLE text-002.
PARAMETERS: r_ps TYPE c RADIOBUTTON GROUP rd DEFAULT 'X' USER-COMMAND abcd, "radio button server
               r_as TYPE c RADIOBUTTON GROUP rd . "radio button for application server
SELECTION-SCREEN END OF BLOCK blk2.
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
PARAMETERS: p_pfile TYPE rlgrap-filename MODIF ID ccc, "presentation server input file
                p_afile TYPE rlgrap-filename MODIF ID aaa. "application server input file
SELECTION-SCREEN END OF BLOCK blk1.
AT SELECTION-SCREEN OUTPUT.
IF r_ps = 'X' .
    LOOP AT SCREEN.
      CASE screen-group1.
        WHEN 'CCC'.
          screen-input = 1.
          screen-invisible = 0.
          MODIFY SCREEN.
      WHEN 'AAA'.
          screen-input = 0.
          screen-invisible = 1.
          MODIFY SCREEN.
      ENDCASE.
    ENDLOOP.
ELSE.
    IF r_as = 'X'.
      LOOP AT SCREEN.
      CASE screen-group1.
        WHEN 'CCC'.
          screen-input = 0.
          screen-invisible = 1.
          MODIFY SCREEN.
      WHEN 'AAA'.
          screen-input = 1.
          screen-invisible = 0.
          MODIFY SCREEN.
      ENDCASE.
    ENDLOOP.
    ENDIF.
ENDIF.
START-OF-SELECTION.
Regards

How to make a window disable/enable in run time in webdynpro application

Hi all,
1) my requirement is in run time i want to make the content of a window in disable mode?
2) and again it should display in enable mode when we perform some action?
thanks & regards
naveen
Moderator Message: This has been covered numerous times in this forum. Also, the forum is not a free consulting service here to do your job for you.
Thread locked
Edited by: Neil Gardiner on Nov 22, 2010 9:27 PM

Hi,
You will not be able to do this with a standard radio button, as each one will be in a separate instance of the row.
The easiest way is to use a checkbox (as you can script this on/off) and then make it look like a radio button.
Example here:
https://acrobat.com/#d=sasUNmniOUgs3MwY-p4H8Q
Hope that helps,
Niall

How to make our own Ajax based custom compnent

hi
i want to make my own Ajax based custom compnent.
i know JSF custom comppnents, but dont know how to add Ajax functionality in it.
what should i have to learn for this.
can any one guide me. if some one have code example it will be appreciated
br,
Haroon

You can read tutorials or manuals from the suppliers of AJAX for JSF components. And of course take a look into the code.
Examples:
http://getahead.ltd.uk/dwr
http://icefaces.org
http://www.exadel.com/web/portal/products/VisualComponentPlatform
https://bpcatalog.dev.java.net/ajax/jsf-ajax/
Overview:
http://www.jsftutorials.net/
http://www.jsfmatrix.net/

How to get current row(Based on Radio button check) submit button Click

Hi i hava Query Region Search(Based On Auto Customization Criteria).
For Showing Results iam Using Table Region.
Using Radio button How we get the row reference value using Submit button Click.
Please Help on this .
Thanks & Regards
San

Hi san ,
Try this
if ("EventID".equals(pageContext.getParameter(EVENT_PARAM)))
String rowRef = pageContext.getParameter(OAWebBeanConstants.EVENT_SOURCE_ROW_REFERENCE);
OARow row = (OARow)am.findRowByRef(rowRef);
VORowImpl lineRow = (YourVORowImpl)findRowByRef(rowRef); // Replace your vo name .
Please refer this link , Let me know if its not clear .
Single Selection in table Region in OAF .
Keerthi

How to auto-populate dates in a calendar based on radio buttons?

Hi,
I'm trying to create an availability form that is submitted on a monthly basis. What I'd like is to have a radio button the user could click to indicate what day the first of the month falls on (Monday through Sunday), and have fields auto-populate with the remainder of the dates on the calendar. As it stands right now, I've got the radio buttons and the text fields, but I'm running into serious issues getting the text fields to auto-fill based on the selected radio button.
I've labelled the radio button group "First Day of Month" and the individual values are "Monday" "Tuesday" "Wednesday" "Thursday" "Friday" "Saturday" "Sunday" and "Start". The "Start" button is hidden but is checked by default.
My text fields are even simpler: "Monday 1" "Monday 2" "Monday 3" "Monday 4" and "Monday 5" (and then, obviously, repeated for each day of the week.
I am horrible at scripting, so I think that might be where I'm running into issues. What I'd like to put is something like this (only, you know, functional, and for each days' text value):
For "Monday 1"
if "First Day of Month.value" = "Monday", "Monday 1.value" ="1"
else "Monday 1.value" = ""
For "Wednesday 3"
if "First Day of Month.value" = "Sunday", "Wednesday 3.value" = "11"
if "First Day of Month.value" = "Monday", "Wednesday 3.value" = "17"
if "First Day of Month.value" = "Tuesday", "Wednesday 3.value" = "16"
if "First Day of Month.value" = "Wednesday", "Wednesday 3.value" = "15"
if "First Day of Month.value" = "Thursday", "Wednesday 3" = "14"
if "First Day of Month.value" = "Friday", "Wednesday 3.value" = "13"
if "First Day of Month.value" = "Saturday", "Wednesday 3.value" = "12"
else "Wednesday 3.value" = ""
For "Sunday 5"
if "First Day of Month.value" = "Sunday", "Sunday 5.value" = "29"
if "First Day of Month.value" = "Friday", "Sunday 5.value" = "31"
if "First Day of Month.value" = "Saturday", "Sunday 5.value" = "30"
else "Sunday 5.value" = ""
Is this possible? I have no doubt there's a better way to do it (with proper coding and everything), so any help would definitely be appreciated!

Hello,
Which sharepoint edition you are using? I would prefer to customize your list form in infopath form then add new connection which will connect to your SQL. Later you can filter data based on cust ID. Here is the link to add connection in infopath:
http://office.microsoft.com/en-in/infopath-help/add-a-data-connection-to-a-microsoft-sql-server-database-HP010092823.aspx
If you want to do it via code then simple ADO.NET connector will help.
http://www.codeproject.com/Articles/33862/Connecting-to-Database-Using-Custom-Webpart-in-Sha
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

How to disable the single radio button in radionbuttongroup????

Hi Experts,
I created the RadiobuttonbyKey UI element and i have set it to the SimpleType which has two values.Say Ex:
    Simple Type : 1 bus
                         2 train
My Requirement is onActionxxxx i have to display only one raiobutton in the Group and onActionyyyy i have to show both the radiobuttons in the group.
Can anyone please help me how to achieve this..............
Regards,
Mahesh

hi Mahesh ,
which UI element you are using ......radio button group is group by key or group by index ?
if it is group by key above specified code holds ,
if is group by index , then you have bind a node of cardinaility 0...n and with one attiribute in that node.
in onActionxxxx()
   wdcontext.nodeRadioButton().invalidate();
IPrivateDynamicTableView.IRadioButtonElement element;
element = wdContext.createRadioButtonElement();
element.setValueRadioButton("Train");
wdContext.nodeRadioButton().addElement(element);
and in onActionyyyyy()
wdcontext.nodeRadioButton().invalidate();
IPrivateDynamicTableView.IRadioButtonElement element;
element = wdContext.createRadioButtonElement();
element.setValueRadioButton("Train");
wdContext.nodeRadioButton().addElement(element);
element = wdContext.createRadioButtonElement();
element.setValueRadioButton("Bus");
wdContext.nodeRadioButton().addElement(element);
Regards
Govardan Raj

How to disable when one radio button is selected

Hi Folks,
One of our requirement is as follows,
Scenario: We have two columns with radio buttons and two dropdown box for the same columns to select the values.
Requirement: When user select one radio button then the other radio button and its relevant dropdown both is disabled.
Radio Buttons:
Company
EmpNo
Dropdown Box:
Company
EmpNo
If CompName Radio button is selected then Radio Buttom and Dropdown Box for Policy Id is disabled.
Finally, The filter is applied on CompName to populate the values in dropdown
Thanks Guys,
KK

look for a function like setActive or setDisable

How to make buttons as disable based on radio button selection in .htm

Similar Messages

Maybe you are looking for