How to make call to Sender Soap Adapter using HTTPS with Client Aut

Hello everyone, I have spent some time trying to get this to work. We downloaded a trail certificate from SAP and installed it on our machine and I created a webservice that works great. I tested the HTTPS without client authentification and it works great, as soon as I change it to use with Client Authentification I can't get it to go through. I am using Soap Sonar to test the certificates. To get the certificate I called the url with firefox then saved the certificate in my trust store, from there I import it to soap sonar as a signed certificate, but I am getting the error <Exception>Object contains only the public half of a key pair. A private key must also be provided.</Exception> I assume I am doing something way wrong, is there a way to get the certificate with both public and private key pair, or a way to test this that I can't seem to find in documentation or blogs?
I def award points
Cheers
Devlin

Hi
I think This link is useful to u
http://www.sapag.co.in/SAP-XI-SOAP-Adapter-FAQ'S.html
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40611dd6-e66e-2910-f383-e80fb44f9cd4
Thanks
Santosh

Similar Messages

Error using Sender SOAP adapter over HTTPS

Hi experts,
Few weeks ago, i developed an interface as follows: SOAP <-> XI <-> RFC.
I tested the functionality using Altova and everything went well, with HTTP.
However, when i use HTTPS it fails throwing these error messages (pop ups):
<i>"HTTP error: could not post file"......
"Error sending the soap data"</i>
I have reviewed the SSL certificates installation and everything seems to be ok, but currently i am stuck and do not know how to fix this.
I have also change the ID comm channel from HTTP to HTTPS with client aut.
Is there any special service i have to activate? (XI services and SPIGATE are already done)
Could you please assist?
Thanks in advance and best regards,
David

David,
have a look @ these threads...u may get some help!!!
Sender Soap with HTTPS
https Soap Adapter
Regards
Biplab

PI 7.1 receiver SOAP adapter using https

Hi all,
In PI 7.1 receiver SOAP adapter using https, what are the configurations necessary in PI box?
Certification, and key store values, security etc etc
-Michael.

>
Michael Johnson wrote:
> I did n't find anything related to 7.1 version
Some leads are provided by help: http://help.sap.com/saphelp_nwpi71/helpdata/EN/56/992d4142badb2be10000000a1550b0/frameset.htm
Regards,
Abhishek.

How to make PI 7.0 soap adapter support SOAP 1.2

hi all:
Is there some idea make PI 7.0 soap adapter support SOAP 1.2?
I have look the document about soap adapter,and it specified that soap adapter only support SOAP 1.1.
http://help.sap.com/saphelp_nw70/helpdata/EN/ae/d03341771b4c0de10000000a1550b0/frameset.htm.
my scenario:
external system send message via soap 1.2 to xi.

for more detail about axis soap adapters refer this link[http://help.sap.com/saphelp_nw04/helpdata/en/45/a4f8bbdfdc0d36e10000000a114a6b/content.htm]

Special characters in sender soap adapter provoke HTTP 500 error

Hi,
SAP R3 is sending a SOAP message to PI through SOAP adapter.
When the payload does NOT contain german characters like ü, it works fine.
However, when the payload DOES contain special characters, the SOAP adapter replies with an HTTP 500 code error.
If I use SoapUI to send the soap message, and setting UTF-8 as the encoding in the program options, it will go through fine. If I change to ISO-8859-1 it will fail.
I'm thinking in two options:
- Make sure that SAP R3 sends the message in UTF-8 format (I think this is happening currently), as if SoapUI works, then probably R3 is not using UTF-8.
- Force the adapter to use UTF-8. Is this possible? In the sender SOAP adapter I've added AF_Modules/MessageTransformBean (type local EB), and then Transform.ContentType for parameter name and --> text/plain;charset=utf-8 for parameter value. The sender adapter will fail then for every message, with or without special characters.
Anyway, in this link (http://help.sap.com/saphelp_nwpi71/helpdata/EN/a4/f13341771b4c0de10000000a1550b0/frameset.htm) it seems to say that the sender soap adapter cannot be extended with modules, so maybe that's the reason why it fails when trying to add a module.
Thanks

If I use SoapUI to send the soap message, and setting UTF-8 as the encoding in the program options, it will go through fine. If I change to ISO-8859-1 it will fail.
I'm thinking in two options:
Check the use of option 1 ..... the URL which SAP is using to send the data can containe the encoding information.
Check this SAP note: https://service.sap.com/sap/support/notes/856597
From the above note:
Q: What character encoding is supported by the SOAP sender adapter?
+you can supply the encoding information with the xmlenc variable in the request URL as in+
Regards,
Abhishek.

SOAP adapter using HTTPS

We need to using SSL over HTTP for our web service defined in PI, basically using HTTPS in our SOAP adatper. I did a lot of research on this, seems like it's not an easy job to enable SSL. However I am only interested in making it work from an application developer point of view, enabling SSL, generating/installing certificate is a job for basis people.
So I created an sender CC with SOAP adapter with HTTPS with client authentication. (BTW, what is HTTPS without client authentication, does it mean HTTPs with server authentication where the server certificate is to be installed at the client side?), to my understanding, the client certificate should be installed in NWA (We have PI 7.1, not 7.0 -) and somewhere in ID (like sender agreement) we need to specify which client certificate should be used to authenticate the client who calls our service. However nowhere in ID I can specify which client certificate should be used for the defined sender CC. So how would it work in runtime? When my web service is called, which client certificate does PI use to authenticate the client?
It'd very much appreciated if you could give more information about how HTTPS for SOAP adapter works? I've done lot of research on this, but still confused.
Thanks

Hi,
for transport level security you should assign the HTTPS connection created in SM59 to the SOAP communication channel.
The HTTPS connection should use the certificates imported in t-code STRUST.
1. You have to dounload the SAP cryoptographic librariers.
2. Set the specific paramerts in RZ10
3. Maintain the enviornmental variables & you need to keep the logon tickets too in some specific directory.
4. Import the client & server certificates into STRUST.
You can find some documents on ABAP ssl configuration from the SDN library .... I don't have a link now
Regards
Sunil.

Communication using Sender soap adapter using secured certificates

Hi All,
For sender soap scenario,
We have installed 3rd party certificate on XI and we have give them XI SSL certificate to 3rd party.
We are getting handshake error when they send message using XI URL.Can you please tell me in which location on webserver where 3rd party has to install certificate and what all settings
I need to give in communication channel and sender agreement?
thanks a lot.
Best Regards,
Harleen Kaur Chadha

Can you please tell me in which location on webserver where 3rd party has to install
certificate and what all settings I need to give in communication channel and sender agreement?
Check this link to know more:
http://help.sap.com/saphelp_nwpi71/helpdata/en/32/1c1041a0f6f16fe10000000a1550b0/frameset.htm
Also there is a Blog by Alexander on Principal Propagation....you can refer it to know more on how, where to include the certificates..
Regards,
Abhishek.

Problem in Sender File Adapter using FCC with Variable structure

Hi Experts,
Hi Experts,
I have facing an issues while using FCC in Sender File adapter. Below are the configs for the same:-
Recordset structure required is ==HEADER,1,DATA,*,TRAILER,1
Recordset per message == *
Key Field Name == Key
(Sorry i dont know how to insert screen shot here..pls tell me how can i insert screen shots here on sdn)
HEADER.fieldSeparator           ,
HEADER.endSeparator           u2018nlu2019
HEADER.fieldNames               Key,x,y,zu2026
HEADER.keyFieldValue          1
HEADER.keyFieldInStructure      ignore
HEADER.fieldContentFormatting     trim
HEADER.additionalLastFields     ignore
HEADER.missingLastFields     ignore
DATA.fieldSeparator
DATA.endSeparator
DATA.fieldNames
DATA.keyFieldValue
DATA.keyFieldInStructure
DATA.fieldContentFormatting
DATA.additionalLastFields
DATA.missingLastFields
Using same variables for Trailer record as well.
Source CSV file which i am picking:-
ADSE ,RASD,replan Contact ,2 0080509 0 8:43:25   ,
EMPL ,0011111, S Top Up ,20080401 ,20080430 ,sdf ,                          00000000431250 ,2007                                    , , , , , ,20080414 18:07:35,
EMPL ,0222222, r Cash Award ,20070701 ,20070703 ,ded ,                          00000000023509 ,2007                                    , , , , , ,20080414 18:09:31,
EMPL ,0233333,   Cash Award ,20070801 ,20070831 ,df ,                          00000000044057 ,2007                                    , , , , , ,20080414 18:10:56,
EMPL ,0244444,   Cash Award ,20080101 ,20080111 ,sf ,                          00000000026717 ,2007                                    , , , , , ,20080414 18:08:29,
BTRL ,   5140,
When i tested the scenario and monitored it using MDT in CC monitoring tool its giving me below mentioned error.
The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
XML document must have a top level element. Error processing resource 'http://myurlname/mdt/me...
However if i change the occurence of DATA as some specific value for eg 4 instead of * it works fine.
Kindly help me in solving this problem.
Thanks,
Aditya Verma

Hi Madan,
Thanks a lot for giving me the way to this. But when i tested this with the below file its giving me the same error. Please let me know if i need to do any changes to the parameters mentioned above:-
ADSE ,ASDA,Sha replan Fr ont Feed Contact ,2 0080509 0 8:43:25   ,
EMPL ,0011111,   Cash Top Up ,20080401 ,20080430 ,TPV ,                          00000000431250 ,2007                                    , , , , , ,20080414 18:07:35,
EMPL ,0222222,   r Cash Award ,20070701 ,20070703 ,TPV ,                          00000000023509 ,2007                                    , , , , , ,20080414 18:09:31,
EMPL ,0233333, r Cash Award ,20070801 ,20070831 ,TPV ,                          00000000044057 ,2007                                    , , , , , ,20080414 18:10:56,
EMPL ,0244444,   Cash Award ,20080101 ,20080111 ,TPV ,                          00000000026717 ,2007                                    , , , , , ,20080414 18:08:29,
EMPL ,0255555,   Cash Award ,20080301 ,20080320 ,TPV ,                          00000000027870 ,2007                                    , , , , , ,20080414 18:08:25,
EMPL ,0266666,   Cash Award ,20071001 ,20071020 ,TPV ,                          00000000020681 ,2007                                    , , , , , ,20080414 18:09:31,
EMPL ,0877777,   Cash Top Up ,20080401 ,20080430 ,TPV ,                          00000000036000 ,2007                                    , , , , , ,20080414 18:07:05,
EMPL ,0888888,   Leaver Cash Award ,20071201 ,20071231 ,TPV ,                          00000000157200 ,2007                                    , , , , , ,20080414 18:11:29,
EMPL ,0899999, S Leaver Cash Award ,20080301 ,20080331 ,TPV ,                          00000000153530 ,2007                                    , , , , , ,20080414 18:07:42,
EMPL ,0800000, S Leaver Cash Award ,20070701 ,20070731 ,TPV ,                          00000000012234 ,2007                                    , , , , , ,20080414 18:08:34,
BTRL ,   5140,
This the original csv file which i'll get in live. Kindly suggest as ur solution worked with other file but not working with this scv file.
Thanks a lot,
Aditya.

How to make table control rows dynamic/unlimited using TC with Wizard

Hi Friends ,
I have designed a table control layout using table control with wizard.
Now the problem is when we design a TC layout ,then we have to design it on the page . The page has upper & lower limits. so the maximum size & maximum rows in layout is limited. I have tried to create a TC layout with maximum size & maximum rows . Maximum rows created in Layout is 25.
Now suppose if enduser wants 100 entries to enter by coping a file of 100 records in my TC present on entry screen , then ONLY 25 entries are displayed on entry scren before doing any user action or saving and after saving only these 25 entries are sved in DB. Means enrtries from 26 to 100 are not displayed on entry screen or saved in DB.
So my requirement is to display all 100 entries at a time in entry screen before saving with scrolling up & down facility and these 100 entries should also get saved in DB after clicking save button. In short I want dynamic entry screen table control which can show/dieplay Any Number . of entries whatever the number may be entered by enduser .
Plz note that I have used all 3 facilliteis i.e.
1. Scrolling
2. INSERT/DELETE
3. SELECT/DESELECT
while designing TC with wizard .
Scrolling buttons like FIRST PAGE, PREV. PAGE, NEXT PAGE, LAST PAGE are displayed.
BUT they are not functioning though there is system generated code present in both MPP and in PBO & PAI. After clicking any of them , data which is dislaying on entry screen ( Here it is 25 entries ) is getting cleared/disappeared from enry entry screen.
Waiting for ur response & solutions.
Thanks & Regards,
Sudhir

Hi Ashish ,
Do one thing .
At PAI of screen holding TC , there is module name tc_mark on request .
in this module , there is work area declared g_tc_wa .
Now go to tc_init module of pbo , where u have given your select command .
select * from ........................................
use this code .
if g_tc_wa is initial .
   SELECT * FROm
   g_tc_wa = 'X'.
   REFRESH CONTROL 'TC' FROM SCREEN dynnr.
   ENDIF.
Just do this , m sure all buttons, insert, delete , scroll bar.. everything will work .

HTTPS sender soap adapter

Hi,
I want to use HTTPS port for one of our SOAP -->RFC sync interface .
currently we are using http://host:port/XISOAPAdapter/MessageServlet?channel=party:service:channel this url and its working fine,
Here we want to use HTTPS ( HTTPS with client authentication as security level) ,but in our current PI system ( 7.31) is not enabled https/ports.
Please let me know how we can enable HTTPS port ,let me know the process.
once HTTPS port is enabled please let me know the process to use HTTPS with client authentication as security level)
Thanks
Surya

Hi Surya,
Base on your requirement ports like 433, 4022 etc as per availability to Trading partners.
Port mapping should be done in the firewall configuration as your web dispatcher port(This information can be obtained from your basis team / will be managed at the installation time / netweaver administration.)
80* series is for ABAP ports and 50* series i sfor JAVA port.
Also check the below link for more information.
http://scn.sap.com/community/pi-and-soa-middleware/blog/2013/09/20/sender-soap-adapter-https-with-client-authentication
Thanks and Regards,
Naveen

Failed in Message Mapping for Sender SOAP Adapter

I am using a synchronous Sender SOAP adapter for sending SOAP messages using HTTP security protocol. I am trying to send SOAP messages to XI and then to RFC-R/3. And Responses back from RFC to XI and then to SOAP. I am getting an error for failed in message mapping in SXMB_MONI for converting SOAP messages to RFC. When I debug it in Message Mapping in Integration Repository, it works fine.
Any help is appreciated.
Thanks in advance!
Mrudula

Hi,
try to do a full cache refresh
regards,
Jakub

HTTPS with Client Authentication in SOAP sender Adapter

Hi All,
In SOAP Sender communication channel. When I generate WSDL with HTTP Security Level = HTTP: it works when third party tries to send data to XIwebservice.
But when I tried with HTTPS with Client Authentication option its giving error
InfoPath either cannot connect to the data source, the service has timed out, or the server has an invalid certificate.
Please guide how to use HTTPS with Client Authentication option, and what all configuration need to apply in XI & in third party to use this.
Regards

Rohan,
With spy you can trace the entire route, since you are using client authentication using certificate, it would be a better option to verify with the certificate.
You also have the option of using a username/pwd combo though that is not advocated as it lowers security levels and is permeable to passive sniffing.
So the answer to your question is yes, after importing the certificate with sender and third party reciever a test would reveal the complete scenario along with any issues that you could encounter..
Regards
Ravi Raman

Change Queue Name in Sender Soap Adapter (or make it dynamic)

Hello SDN!!!!
We have a scenario where we want to make a message EOIO and I have set the Queue Name in the Sender Soap Adapter and this works great. BUT it is needed to have a more specific queue name (based on order numbers not interface name) So with this being said, Is there any way to change the queue name or append to it from the Soap Sender Adapter. I see it is possible to write a Module Bean, but the Message object returned from the ModuleContext is a scaled down version of the normal message object. Any help would be greatly appreciated
Cheers
Devlin

Is this the only way to change the queue name for Soap Sender? I don't think it is possible for them to do this, as their urls are static when calling us

How to use Basis Authentication in Sender SOAP Adapter

We implemented one Sender SOAP Adapter and we had to implement the modified WEB.XML method to remove the security specification. We have now asked the developer to correct this situation so we can remove this modification. The Interface developer would like to use Basic Authentication. If you have an automated interface sending in a SOAP Message, how do you do Basic Authentication?
I've tried using:
http://host:port/XISOAPAdapter/MessageServlet?channel=:<Service>:<Channel>&sap-user=xiappluser&sap-password=<Password>&sap-language=EN&sap-client=<Client>
When I do this, I still get the Authentication Pop-Up Window.
How does the Sending Interface either supply the ID and Password on the incoming SOAP Message or respond to the Authentication Pop-Up?
Thanks,
Anne

By Defualt the web service exposed by you will use Basic Authentication mode only.
But the way you do Basic Authentication in the web client is platfrom dependent.
This is not the way to do Basic authentication
http://host:port/XISOAPAdapter/MessageServlet?channel=:<Service>:<Channel>&sap-user=xiappluser&sap-password=<Password>&sap-language=EN&sap-client=<Client>
I am providing you a code snippet on how to Basic Authentication in Java when making the Web Service Call.
If the client is on some other platform just look for the corresponding api.
Please award points if you find this answer useful.
Code Snippet
URL url = new URL(URL);
URLConnection connection = url.openConnection();
if( connection instanceof HttpURLConnection )
((HttpURLConnection)connection).setRequestMethod("POST");
     //connection.setRequestProperty("Content-Length",Integer.toString(content.length()) );
     connection.setRequestProperty("Content-Type","text/xml");
     connection.setDoOutput(true);
     String password = User + ":" + Password ;
      //Where con is a URLConnection
     connection.setRequestProperty ("Authorization", "Basic " + encode(User + ":"+ Password));
     connection.connect();
Encode Method
public static String encode (String source) {
BASE64Encoder enc = new sun.misc.BASE64Encoder();
return(enc.encode(source.getBytes()));

How Sender SOAP Adapter will retriew the data to process further

How Sender SOAP Adapter will receive the data to send the integration server to process further

Hi,
1. All details are always taken from the Sender Agreement.
For the Sender File adapter and the Sender SOAP adapter , the details that include are , Sender Service, Sender Interface Name and namespace and these are the details that make up the SOAP header when the message hits the integration Engine.
Once the corresponding Adapter for the message is identified, ie. the Sender SOAP adapter , the message for the SOAP header is then taken from the Sender Agreement of that adapter. This is the exact reason why one Sender Adapter can be involved in one and only one Sender Agreement.
Regards
Bhavesh

How to make call to Sender Soap Adapter using HTTPS with Client Aut

Similar Messages

Maybe you are looking for