How to make camera sound totally silent?

I have Nokia E5 smartphone. I want to make camera sound totally off. I've download a patch file but it shows me certificate error. Is there any way to make camera totally off?

@ic3_fir3_
You're on the right track. Phone hacking isn't an acceptable topic in these official forums, but do some more web research or ask on unofficial Symbian site. I suspect you can still make it work, but sadly the process is harder than it used to be.

Similar Messages

How to mute camera sound in n82

Hi
can you please tell me how to mute camera sound in n82

11-Sep-2008 10:13 AM
sarawirda wrote:
Yes, I agree but sometimes in certain situation, i need it to be mute, like when to snap picture in some quite place. I tried off the warning tones but the n82 camera sound still can be heard.
In that case I'm afraid you're out of luck. Your N82 was obviously intended for a region where the camera must make a noise.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

How to make it sound as if it is in the next room.

I am new to the audio editing/mixing.
I am curious how to make dialog sound as if it is happening in the next room.
I vaguely remember a setting that was doing something like it and it was actually called similarly (In the next room), but now I can't find it.
If it doesn't exist and it was one of those borscht induced nightmares, how one would approach this anyway?
Thanks a lot in advance.

In the effects rack, there are several "room" settings you can apply, and tweak the parameters to make it sound as if it's in the same room or next door.

How can I make camera sound off but keep others notification have sound

I can't turn off my camera sound off

Put the device in Silent or Vibrate mode to silence the camera shutter.
There are also some third party apps which will do this, search your BlackBerry World.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to mute camera sound??

i have iphone 4 ios7, i can't mute my camera sound but i've been switch the silent button. heelp me

Laws in some countries don't allow silent phone cameras to discourage surreptitious photography. iPhones sold in those countries will not silence the camera.
You may be able to reduce its volume via
Settings > Sounds > RINGER AND ALERTS

How to make audioclip sound once in a thread?

in the thread, it sleep(100), so once I add the audioclip, it couldnot sound properly, and never stop.
how to make the audioclip sould once in that thread?
thank u so much!!!

Jurjen Heeck wrote:saslove sap wrote:>
> >
> > >
xinjiang li wrote:
> > > Hi:
> > > How to reference other's message in a thread when I wanna reply to him or her?Thanks in advance.
> >
>
> > Click the reply link with the message you want to quote, and then click the " (double quote) button/link in the editing screen.
> >
> > Jurjen
>
> Ha Ha for me also working !!...
>
> Regards
> sas
wow !!! it works

How to make a Vertical Total of a multilline item?

Hello,
I have a block that contains 12 numeric multiline items. I would like to make a vertical total for each item.
I tried to make a reference item, it didn't work. i tried also to make it by doing a Sum of my item, it didn't work neither.
Could someone give me any ideas how to figure it out?
thanks

You use Summarized items for this:
-Create a non-database-block, name it e.g. BL_CONTROL, set the property "Single record" to "Yes".
-Create a number-item in the block, set the property "Calculation Mode" to "Summary", "Summary function" to "sum", and "Summarized Block" and "Summarized item" to your block/item you want to sum up.
-Set the property "Query all records" to "Yes" on your database-block.

How To make group wise total in Bex report

Hi!!! Guru's
i m doing reporting on SD module, so client wann see the summerised report
on delivarys, senario is the one sale order having the multiple delivery, so the
i have to show the total result for all deliverys agianst the purticular sales order
in one row.i know we can do that at the excel level but hot to do it at the query
design level.highly appreciate u r help on this.
wil asign pts for sure,,,
thanks in adv
Mohan

Hi!!! Trippel K
thanks for reply...
my Q's is how to make the group wise total means, i m going to genaret the
report on delivery delays on cube 0SD_C04 (Delivery Service), in that the the date
is comming from the 2LIS_12_VCITM delivery item data, the schedule line data
from 2LIS_12_VCSCL, when i m getting according to date wise it showing all data from item level n schedule line, the senario is i have to use date from item level n
all delivery from schedule line, so any inputs regarding this, plz let me, wil appecite
u inputs
thanks in adv
Mohan

How to make a sound play after I complete a download in safari

I am just wondering if there is a way to make a sound go off after I successfully complete a download in safari 5.0.5.
If anyone can help, I appreciate it!

I do not think there is one actually. You could always look through the Safari Extention Gallary (https://extensions.apple.com/) and see if there is a 3rd party one you could use.

How to make a Moving total in Query Designer

Hi,
I make trend analysis over sales.
Besides the actual sales figures, I would like to show a Moving Annual Total (MAT).
I can make this based on a specific period (using an offset of 0 to -11, and so on), but now I want to see the trend over an interval (for instance 12 month).
I am not able to incorporate the interval values into the period variable.
Can anybody help me with this?
Regards,
Erik Henning

Tanks again.
I am able to make a time (Fiscal year period) variable of the type interval to set the limits to my query.
I also was able to make a time (Fiscal year period) variable to set my offset to 0 to -11.
The problem is combining those two.
When I combine them, I have to enter the limit values and a value for the offset variable.
When I do that, I get the offset value of the period I entered in all the periods within my limits and that is not what I want. I want this offset period variable to use all the periods of my interval.
Can you tell me how to proceed?
Erik

How to make the inactive tabs silent?

Когда открыто несколько вкладок с каждой вкладки идет звук, который мешает активной вкладке.
Можно ли сделать чтобы звуки в неактивных вкладках отключались.
translite:
When you open multiple tabs, with each tab is a sound that prevents the active tab.
Is it possible to make sounds in the inactive tabs turned off.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Maybe also check this pref on the <b>about:config</b> page.
*browser.tabs.maxOpenBeforeWarn
*http://kb.mozillazine.org/about:config

Alarm clock - how to make it sound only, no vibration

Hi,
I hate being woken up by a vibrating iphone : is there a way to have a "sound only" mode for alarm clock?
Thanks,

Far as I know, you have to flip the side switch so that it doesn't show the orange strip AND turn vibrate off in Preferences/Sounds. That's the only way I've managed to turn off vibrate for the alarm clock. Of course, it's a pain to have to do it all over again when you want to set your phone to silent and still know someone's calling or texting you...

How to make stereo sound play also from rear speakers on X-

X-Fi is excellent card. Just one question though (CMSS 3D disabled, 5. speakers set correctly): when I play stereo file (like MP3) the sound comes only from front speakers. Well it's logical of course but my old Audigy duplicated the sound also to rear speakers (the center speaker wasn't used) - so is it posible also on X-Fi to play stereo music from rear speakers too without enabling CMSS?

Actually I just found out that this CMSS3D is VERY good way to expand stereo to 5. (although it's not what I originally meant) - so no need to reply me but I'll welcome any opinions anyway.

How to make a decent surround mix?

I've never used STP, but I'm hoping you experts can help. I've posted this question in the FCP forum but got no respsonse. So I did a little more searching and realized this might be a better place for the question.
My goal is to take two-channel HD video, add a stereo music track, and produce something that sounds good in full surround. Is there any good tutorial on how I might make a modestly better surround mix? I'm not trying to win an Oscar here, or become a sound engineer. So simpler is better, please.
I've worked out a way to put surround sound into my HD movie, burn it to a DVD AVCHD using Toast, and get it all to play on a blu-ray player, Cool!! It looks great and has 5.1 Dolby Digital surround, all on a cheap DVD disk. I get about 30 minutes on the disk.
But now I realize I don't know jack about how to make it sound good. All I've tried so far is putting a stereo song into the surround speakers with the movie stereo in the fronts as usual. It's pretty cool, but it isn't exactly "immersive".
I think I might get a better result using an upmixing tool such as Upmix 1.1.1 from Cycling '74 (or is it KVR Audio?) to simulate 3D sound from my 2D source materials.
Has anyone tried something like this? Is it worth the bother? Any tips appreciated.

My surround experiments test results:
Content: Two stereo tracks, a movie and a song.
Objective: Make a nice surround mix, something better than sending both tracks only to the fronts
Tools: Soundtrack Pro, Compressor 2.3.1 I have no system for "live" surround playback and no software designed to simplify front-rear fades and 3D sound placement. To test any mix, I have to burn it to disk and preview it on my (calibrated 7.1) home theater system.
*Hold Fixed:* No change was made to the stereo pan of either stereo pair. In all tests I let Compressor create a center mix at -3dB and a LFE using its low-pass filter checkbox.
*Experimental Design:* I have just four levers to pull - the level of each stereo pair in the front and in the rear. To simply testing, I used just 3 levels, 0 dB (no change), -3 dB and off, -∞. Four variables at 3 levels gives you 81 total combinations. Since I have to burn to disk, I can't run all those. Many tests can be eliminated as nonsensical, eg. the one test with all levels at -∞. Further eliminating the combinations that give level totals that are obviously too low or too extreme, I was left with 8 mixes I actually tested:
Movie Music
_F / R F/R Comment_
1. 0 -∞ -∞ 0 Uncomfortable, too "obvious"
2. -3 0 0 0 music a little dominant
3. -3 0 0 -3 music too front
4. 0 -3 0 0 not bad, music more forward than #6
5. 0 0 0 -3 music too front
6. 0 -3 -3 0 my favorite - very smooth transition when music starts
7. 0 0 -3 0 music too rear, oddly
8. 0 0 0 0 result pending
Conclusion: It's possible to make a dramatically improved sound mix over the two-channel stereo that is exported by iMovie. A starting point is simply duplicating the front signal into the surround speakers. A slight fade - in my case the movie was reduced in the rear and music reduced in the front - gives a nice "opening" of the sound and some sense of 3D. I believe this preset could be applied blindly to many movie+music projects and give an acceptable result.

I have a iphone3gs and it's vibrate dead , how to make it ?????

How to make vibrate

Settings > Sounds
Ensure the Vibrate is enabled in Silent and in Ringer and Alerts.

How to make camera sound totally silent?

Similar Messages

Maybe you are looking for