How to make CASA module re-configure ?

Hi All
My customer has some workstation login very slow(4~10 mins) about these weeks...I find the reason is User Module (because I disable the module, login speed could decrease to 20 seconds),temporary solution that I reinstall ZCM Agent...but it spend much time....
I want to re-reconfigure CASA let he re-Scan the workstation for get correct configure or parameters......How to make re-Reconfigure CASA ?? and I have another question that I try to deliver CASA.msi...and add "/qn /norestart" parameter...but it still reboot automatically....How paramter I add to make the msi "norestart" ??
wyldkao

Originally Posted by wyldkao
Hi All
My customer has some workstation login very slow(4~10 mins) about these weeks...I find the reason is User Module (because I disable the module, login speed could decrease to 20 seconds),temporary solution that I reinstall ZCM Agent...but it spend much time....
I want to re-reconfigure CASA let he re-Scan the workstation for get correct configure or parameters......How to make re-Reconfigure CASA ?? and I have another question that I try to deliver CASA.msi...and add "/qn /norestart" parameter...but it still reboot automatically....How paramter I add to make the msi "norestart" ??
wyldkao
wyldkao,
I had this exact issue, so far the only way I have found round this is to uninstall the CASA first and then install with /norestart - no matter what I tried it would automatically restart via a repair.
I haven't found any issues yet... though I'm sure someone could advise if this will cause an issue.

Similar Messages

  • How to Make a BOM as Configurable BOM ?

    Hi,
    Please answer my question , How to Make a BOM as
    Configurable BOM ?
    Regards,
    Abhilash

    Dear Abhilash,
    Please refer to the following link:
    http://sap-img.com/sap-sd/sales-bom-implementation.htm
    I will suggest you to visit http://sap-img.com/sap-sd.htm. It will give you the overview of SAP SD module.
    Moreover there is a separate section of FAQs with answers which will help you in great deal.
    Do let me know in case of any queries.
    Hope this helps you.
    Do award points if you found them useful.
    Regards,
    Rakesh

  • How to make IrDA module

    Hi,
    I using MS-6454 motherboard. This mobo support IrDA port but I couldn't find the module connector in our market (I even tried to contact the Authorized Distributor in my country).
    I think this module is not complicated so I can make it myself if I know the circuit schematic.
    Could anybody kindly send me that schematic ? I will use it on my own risk, of course.
     Thank so much for your support.

    Originally Posted by wyldkao
    Hi All
    My customer has some workstation login very slow(4~10 mins) about these weeks...I find the reason is User Module (because I disable the module, login speed could decrease to 20 seconds),temporary solution that I reinstall ZCM Agent...but it spend much time....
    I want to re-reconfigure CASA let he re-Scan the workstation for get correct configure or parameters......How to make re-Reconfigure CASA ?? and I have another question that I try to deliver CASA.msi...and add "/qn /norestart" parameter...but it still reboot automatically....How paramter I add to make the msi "norestart" ??
    wyldkao
    wyldkao,
    I had this exact issue, so far the only way I have found round this is to uninstall the CASA first and then install with /norestart - no matter what I tried it would automatically restart via a repair.
    I haven't found any issues yet... though I'm sure someone could advise if this will cause an issue.

  • How to make case struture be finished

    I have program and one part of it works for feedback. When pressure riches some critical value it opens valve(automatic mode). As a result pressure drops back. It can work as well in constant mode: opens valve periodically for some period of time. It works perfect in periodical mode, but when I use automatic mode it works just partially: when the valve openes it reduces the pressure and condition for beginning of case structure changes. If pressure becomes lower and again higher then critical it opens valve again but I want it to be opened in same manner as in periodical mode(When the pressure reaches critical it should open valve for fixed period of time and repeat this if necessary only after some minimum fixed time).
    So the question is how to make the automatic mode work.
    I have put a gif image of part of VI that does this job and full VI as well.
    Thanks.
    Attachments:
    example.GIF ‏10 KB
    Vibrafilter.zip ‏350 KB

    Thanks   johnsold
    for responce.
    I know that is not simple to read this vi, too much stuff in it.
    For this reason I have put .gif image of vi part I am intereasted in and I forgot to mention that this part of is moved in a right upper corner of vibrafilter.vi.
    In this vi everything works already and i just need this issue (mentioned in previous post) to be fixed. It is quite simple: I have signal from pressure transducer and depending on my system behaviour I can use either automated valve opening or just periodical opening to stabilyze the pressure. Valve opens for some fixed period of time and next time it opens only after some time gap. Periodical valve opening works perfect.
    For automated valve opening I am using pressure transducer signal which is compared with some constant value. But it does not work properly it opens valve just for a fraction of time and closes again and then can opens again if the pressure is again gets high.  I would like to trigger "periodical valve opening" for one cycle, and repeat it only if it is necessary(pressure higher than some consant).
    Hope it hepls to understand my problem.

  • How to make Web module produce different-sized JPEGs for different pictures?

    Hi --
    Googled this question, searched the "help" on Lightroom, searched Adobe, downloaded the latest version of Lightroom, searched this forum, no help, so I'm asking:
    I'm using the Web module in Lightroom (which I've already used to create five other sites) to put together a site. Normally, I just set the JPEG size to "1024" with the "Size" slider under "Image Pages," and normally that's fine.
    In this case, however, I'm posting some telephoto shots of dolphins and some of the pictures are cropped below 1024 on both height and width of the raw image, and so LR renders a JPEG that it upsamples and of course it looks terrible.
    Is there a way say, "okay, LR Web module, 1024 pixels' width or height is fine for most of the pictures, but these two shouldn't be more than 400 pixels on either dimension?"
    In case it matters, I'm running LR on a Vista 64 system, 3 GB RAM.
    Even if you can't help, thanks for taking the time to look at the question!

    Hi,
    The slide duration in presenter is automatically adjusted according to the time of the audio inserted on that slide.
    How are you inserting audio on slide ? Recording or inserting  using presenter option ?
    You cannot create a movie format like avi, mp4 etc
    But you may publish the presenttaion in the swf format which will play in a browser or a swf player. To play in the broswer you just need to have Adobe Flash Player installed on your system. It will play like a movie in the broswer.
    Let me know if you need some more help
    Thanks,
    Alpi Agarwal
    Adobe Presenter Engineering Team

  • How to make function module remote enabled?

    I am trying to make the RSCRMBW_GET_CELL_DATA_BAPI function remote-enabled by choosing remote-enabled in the attributes tab in the function builder. When I try to activate the function, I get an error telling me that Reference parameters are not allowed with RFC. In order to get around this, I set each of the import parameters to pass value. This time, I get an error for Generic types not allowed in RFC. I change the I_NO_TEXTS type from C to CHAR50. Finally, I get an error for Type RSCRM_BAPI6111CD_LARGE_T is unknown. I am able to see this type in both the RSCRM type pool (to which the 'unknown' type belongs) and CL_RSCRMBW_BAPI>GET_CELL_DATA_V2 method (which calls the function). However the function builder still tells me that the Type RSCRM_BAPI6111CD_LARGE_T is unknown.

    Hi,
    You need do this in a work around way. My suggestion is you need to create wrapper function module (RFC enabled) with same paramters of fm RSCRMBW_GET_CELL_DATA_BAPI and inside this function module pass these parameters and call  fm RSCRMBW_GET_CELL_DATA_BAPI, then there is no need to change fm RSCRMBW_GET_CELL_DATA_BAPI
    a®

  • How to make EP Logon Page configurable?

    Hi Everybody!!
    I have modified the logon page of EP and everything works fine. But i have a query.
    Generally the logon page which is designed by me changes as per the requirement or on monthly basis. The change include enabling/disabling of any link such as some mail link or enabling/disablng of the company banner/company message.
    Now for doing any such kind of change, i have to modify the PAR file and then re-upload it again.
    But i would like to know, Is there any way to do this kind of changes without changing the PAR file and putting these properties on the Portalapp.xml and then create iView on this and then by modifying the properties from the properties editor, i will be able to handle the logon page better??
    I know that we never create an iView on the logon PAR but write its name in the authscheme.xml.
    If any one would be able to tell me how this authschemes internally works (how it loads the PAR and then creates the logon page and where it keeps the logon page in PCD), that will also be fine.
    Thanx in advance.
    Regards
    Gaurav

    >  I wander if Java systems have an heterogeneous system copy procedures
    They do of course but you need to have a certified migration consultant on-site, otherwise you'll loose SAP support during the  migration and for the target system. See http://service.sap.com/osdbmigration --> FAQ
    Apart from that the migration itself is described in the standard system copy guides.
    > and wheher such existing configuration(+HA) can be handled as HA on HP-ux with service guards(incl. Extension for SAP)
    Yes, it can.
    If your read the installation guides for the specific system configuration you'll find a special section for HA setups.
    Markus

  • How to make the workflow available for Contract Template ? CLM

    Hi expert,
    It seems that no workflow can be defined in the Library Item Phase Configuration .
    The customer needs the approval workflow for the contract template also ,so does anyone know how to make it
    possible with configuration or Dev ?
    Your help is highly appreciated !
    Thanks a lot !
    Regards,
    Lilian

    Refer :
    7 Component Configuration Dependencies
    http://otn.oracle.com/docs/products/ias/doc_library/90200doc_otn/core.902/a92171/compdep.htm#1008620
    Web Cache
    http://otn.oracle.com/docs/products/ias/doc_library/90200doc_otn/core.902/a92171/compdep.htm#1016697
    3.2.2 MIDTIER OPCA Mode
    http://portalcenter.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/CONFIGHTML/cgbasic.htm#1008246
    - Senthil

  • How to make tables visible for Group Operations

    Hi:
    - SunMC Group Operations has a 'Modules Table' option which
    allows users to edit tables within a module
    - Why is it that for some modules, the tables are not visible at all, but
    for other modules, the tables are visible ?
    - Is there any documentation available which outlines how to make a module's
    table visible under SunMC Group Operations 'Modules Table' option ?
    thanks
    J L

    Please check the below thread.
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/eff6e995-e13e-4e30-844e-6242a613daff/making-sp-apps-visibleinvisible-to-users
    My Blog- http://www.sharepoint-journey.com| Twitter
    If a post answers your question, please click "Mark As Answer" on that post and "Vote as Helpful

  • How to have a module listening a socket port?

    Hi,
       who know how to make a module of adapter and let it listening a socket port?
    thanks in advance

    Hi,
    Take a look at this blog,
    /people/saravanakumar.kuppusamy2/blog/2005/12/15/socket-integration-with-xi
    Regards,
    Bhavesh

  • MOVED: how to make a good flow in the case?

    This topic has been moved to Off Topic Technical.
    how to make a good flow in the case?

    Browser variation is something we must all deal with.  For best results, begin projects with a clear idea of what type of layout you need (1-column, 2-column, 3-column or Multi-column grid).  Then get a CSS Layout that meets your requirements.
    PVII CSS Templates are rock solid & thoroughly tested to perform well in all browsers (commercial product)
    http://www.projectseven.com/products/index.htm
    CSS Layout Magic (commercial extension for Dreamweaver)
    http://www.projectseven.com/products/templates/pagepacks/cssmagic/index.htm
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/
    http://twitter.com/altweb

  • How to make a clipping mask in this particular case?

    Okay, Just to begin I know how to make a clipping mask, but for the case that I'm going to present right now I just can't figure out what mistake I am doing (if any). However I am a beginner.
    http://vector.tutsplus.com/tutorials/illustration/how-to-create-a-medieval-paper-scroll/
    In the link to above tutorial on how to make a medieval scrol I'm stuck at step 25 and would be glad to anyone who helped.
    As said in step 25 that expand the appearance of the scroll and select the two then clip the mask. In th above picture I have just selected the scroll to show how it looks.
    Now as you can see in the image below I have expanded the appearance of the paper scroll. Then I selected the paper scrol and the yellowish green grunge background placed below it. And the moment I hit Ctrl+7 (in windows) or Command+7 (in Mac) to make a clipping mask the error that showed up has been highlighted.
    One more thing, I have clipped masks before too in the same tutorial given above but I don't know what has gone wrong for me in this step.
    Please help.
    Signed,
    Awais Rauf

    Why would you want a clipping mask? I don’t see a reason for it.
    However, for what you want I would use the Pathfinder panel to combine all the paths into one shape. First use the ungroup and release compound commands a few times each, to make sure you have nothing grouped. Then press the top left button in the Pathfinder p[panel. This should produce one closed path that just surrounds the scroll.

  • How to make use of SE37- Function Module & how to find out the table?

    Hi ,
    1.Could anyone help me what's this SE37-Function module is all about,How to make use of this?
    For Eg,If i want to delete a BOM permanently from the system then I have to use the Function module CM_DB_DEL_FROM_ROOT_BOM.
    But after giving the particular name what should i do?
    Please help me.
    2.How to find out the respective table for a particular field sya for T code-COGI, T code MFBF,where its values are getting populated.,Please help in this issue.
    Thanks in adavnce for spending some time
    Raj.S

    Hi Raj
    Function Modules
    Function modules are procedures that are defined in special ABAP programs only, so-called function groups, but can be called from all ABAP programs. Function groups act as containers for function modules that logically belong together. You create function groups and function modules in the ABAP Workbench using the Function Builder.
    Function modules allow you to encapsulate and reuse global functions in the SAP System. They are managed in a central function library. The SAP System contains several predefined functions modules that can be called from any ABAP program. Function modules also play an important role during updating  and in interaction between different SAP systems, or between SAP systems and remote systems through remote communications.
    Unlike subroutines, you do not define function modules in the source code of your program. Instead, you use the Function Builder. The actual ABAP interface definition remains hidden from the programmer. You can define the input parameters of a function module as optional. You can also assign default values to them. Function modules also support exception handling. This allows you to catch certain errors while the function module is running. You can test function modules without having to include them in a program using the Function Builder.
    The Function Builder  also has a release process for function modules. This ensures that incompatible changes cannot be made to any function modules that have already been released. This applies particularly to the interface. Programs that use a released function module will not cease to work if the function module is changed.
    Check this link
    http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
    You can execute function module in SE37ie you can perform the activiites defined in the function module by executing it.
    By deleting BOM you mention the FM name in se37 and execute. In some function module it will ask input parameters as developed in the program , you have to give the input parameters and execute.

  • Trying to enter hotel password and 1st letter is always upper case and password is lower case.  Can't figure out how to make 1st letter lower case

    I am trying to enter a hotel password for internet access.  The password is all lower case, but the 1st letter I type is always upper case and I can't figure out how to make it lower case.  Help?

    The digital keyboard on the iPad uses an "Up Arrow" as a symbol to represent its shift key(s). If it's highlighted, then the next letter typed will be upper-case. Just tap on the Arrow symbol and it should be unhighlighted. Now if you type any letter, it will be lower-case.

  • How to make custom binary module and add to powershell?

    How to make custom binary module and add to powershell?
    I wish to add 'Microsoft.SharePoint.Client.dll' in powershell as binary module so I can use its intellisense.

    Hi Biraj,
    I replied to this in other thread
    https://social.technet.microsoft.com/Forums/en-US/a13c9cc8-7d53-46b5-b5bb-65404db2d347/how-to-make-intellisense-enable-in-powershell-in-csom-for-sharepoint-online?forum=sharepointdevelopment
    Kind Regards,
    John Naguib
    Senior Consultant
    John Naguib Blog
    John Naguib Twitter
    Please remember to mark this as answered if it helped you

Maybe you are looking for