How to make changes in standard transaction ME51N.

Hi,
   Can anyone tell me how to make changes in standard transaction ME51N.
   I want to call transaction AS01 by clicking on standard button create asset. Please do the needful.
Regards.
Aniruddha

Hi anirudda
          As i understood from your question is that you want to add a new field 'CREATE ASSET' on me51n screen.
If i am correct you can use 'MEREQ001' enhancement for this purpose and you can write you code in the exits available in this enhancement.
Please check the documentation of this enhancement for more info.
(Use Smod for this purpose)
I hope it is helpful.
Reward points
Thanks,
Prasanna

Similar Messages

  • How to make changes to standard UWL WebDynpros?

    Hi,
    We are faced with the problem to make changes to the standard UWL Person Search Dialog. But couldn't find any documentation, blog or anything else how to achieve this. We strongly believe, that we have to create a new track in nwdi, import uwl development components, make changes to them, transport and so on.
    So, how can we make changes to standard uwl WebDynpro components?
    Thanx,
    Gerald

    After investigating hours of hours i have come to the following conclusion concerning uwl customization:
    uwl can be customized following this documenation https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a3461636-0301-0010-3787-978f5ac8bd45
    I have tried to check out the sap standard software component (sap.com/UWLJWF), put them into a nwdi track and try to change it. Just the same way as you have to do it using ess/xss.
    But it didn't work out, because source codes are not included. I have also got the info from sap that the uwl webdynpros are not designed for custom changes.
    So, there is no way.

  • How to make changes to profit center standard hierarchy?

    Hello!
    I have to make changes in standard profit center hierarchy. Should I make the changes in IMG or Sap Easy access -screen? If I make changes in IMG, could you please tell me the right path where can I find it?
    Another question, if some profit center is in the wrong place in stardard hierarchy and I want to transfer it to another place (under other node for example), how is this done? Should I delete this profit center first (I tried delete but it wasn't possible..) or can I just transfer the profit center?
    Thanks!
    Points will be given!=)

    Hi,
    in the IMG you can maintain the profit center standard hierarchy via TA KCH4. The path is:
    -> Controlling
    -> Profit Center Accounting
       -> Master Data
        -> Maintain Standard Hierarchy
    The transport of the profit center standard hierarchy is done via TA 0KEQ,  (this is relevant for both KCH5N and KCH4).
    IMG Path:
    -> Controlling
    -> Profit Center Accounting
      -> Tools
       -> Transport Customizing Settings
    Hope I understood you correctly.
    Regards
    Karl

  • How to make changes in another program?

    Hi evrybody,
    how  to make changes from one program  to another program ?
    Changes should be reflecting in other program.
    thanx in advance n wud be surely Rewarded if answer is helpful.

    Hi Bharat,
    Thanx for the info.
    But what my requirement is , I'm scanning & reading another report into an Internal table. I want to change the Hyphen's
    '-' used in variable declarations of another program into Underscore '_' .
    My sample code is like this..
    Report Zmain.
    PARAMETERS:
      p_prog LIKE sy-repid,
      p_key LIKE stokex-str.
    Internal Table t_itab                                                *
    DATA:
      BEGIN OF t_itab OCCURS 0,
        line(256) TYPE c,
      END OF t_itab.
    *" Data declarations...................................................
    DATA:
      t_statements LIKE sstmnt OCCURS 0 WITH HEADER LINE,
      t_levels LIKE slevel     OCCURS 0 WITH HEADER LINE,
      t_tokens TYPE stokesx    OCCURS 0 WITH HEADER LINE,
      t_keywords LIKE t_itab   OCCURS 0 WITH HEADER LINE,
      w_i TYPE i,
      w_j TYPE i.
                            START-OF-SELECTION                           *
    START-OF-SELECTION.
      APPEND p_key TO t_keywords.
      READ REPORT p_prog INTO t_itab.
      SCAN ABAP-SOURCE t_itab
      STATEMENTS INTO t_statements
      LEVELS INTO t_levels
      TOKENS INTO t_tokens
      KEYWORDS FROM t_keywords
      WITH INCLUDES
      WITH ANALYSIS
      WITH COMMENTS.
                            END-OF-SELECTION                             *
    END-OF-SELECTION.
      LOOP AT t_statements.
        READ TABLE t_levels INDEX t_statements-level.
        w_i = t_statements-from.
        w_j = t_statements-to.
       IF t_statements-level > 0.
        WHILE w_i < w_j.
          READ TABLE t_tokens INDEX w_i.
          REPLACE '-' WITH '_' INTO t_tokens-str.
          w_i = w_i + 1.
        ENDWHILE.
       ENDIF.
      ENDLOOP.
    My called program is like this....
    Report Zcalled.
    DATA:
      w-var1 TYPE c,
      w-var2 TYPE c.
    DATA:
      fs_flight1 TYPE sflight,
      t_flight1 LIKE STANDARD TABLE OF sflight.
    START-OF-SELECTION.
      INCLUDE zinclude3.
      SELECT * FROM sflight
        INTO TABLE t_flight1
        WHERE carrid = 'AA'.
      SELECT * FROM sflight
       INTO TABLE t_flight1
       WHERE carrid = 'LH'.
    END-OF-SELECTION.
      LOOP AT t_flight1 INTO fs_flight1.
        WRITE: / fs_flight1-carrid,
                 fs_flight1-connid,
                 fs_flight1-fldate,
                 fs_flight1-price.
      ENDLOOP.
    Thanx very much.

  • Can any body tell me how to make changes in the print layout of Fb03.

    hi,
    Can any body tell me how to make changes in the print layout of Fb03.
    I want to add comapny address on the layout.
    Regards
    Mave

    If you mean the correspondence, you have to change the configuration in Financial Accounting -> AR and AP -> Business Transactions -> Outgoing Invoices -> Carry Out abd Check Settings for Correspondence. There, you need to assign your custom Program or Layout for the Correspondence Type (like SAP19) and Program.
    If you mean the display layout in transaction FB03, You can change a few settings, mainly with BKPF and BSEG fields. I don't think you can add company address, though.
    Good luck,
    Bhanu

  • What is module pool programming?how we can change the standard screen?

    Hi EXPERTS
    what is module pool programming?how we can change the standard screen using module pool programming ?
    please explain with example.

    Check the below link:
    http://wiki.ittoolbox.com/index.php/FAQ:What_is_module_pool_program_in_abap%3F
    http://help.sap.com/saphelp_46c/helpdata/en/35/26b1aaafab52b9e10000009b38f974/content.htm
    http://sap.mis.cmich.edu/sap-abap/abap09/sld011.htm
    http://sap.mis.cmich.edu/sap-abap/abap09/index.htm
    http://www.geocities.com/ZSAPcHAT
    http://www.allsaplinks.com/files/using_table_in_screen.pdf
    http://help.sap.com/saphelp_webas630/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm
    http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
    http://www.sap-img.com/
    http://help.sap.com/saphelp_46c/helpdata/en/08/bef2dadb5311d1ad10080009b0fb56/content.htm
    http://www.sapgenie.com/links/abap.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/c9/5472fc787f11d194c90000e8353423/frameset.htm
    You can also check the transaction ABAPDOCU which gives you lot of sample programs.
    Also you can see the below examples...
    Go to se38 and give demodynpro and press F4.
    YOu will get a list of demo module pool programs.
    One more T-Code is ABAPDOCU.
    YOu can find more examples there.
    See the prgrams:
    DEMO_DYNPRO_TABLE_CONTROL_1 Table Control with LOOP Statement
    DEMO_DYNPRO_TABLE_CONTROL_2 Table Control with LOOP AT ITAB
    http://www.geocities.com/ZSAPcHAT
    http://www.allsaplinks.com/files/using_table_in_screen.pdf
    regards,
    venkat.

  • How to make changes in company code global data

    Hi folks,
    Can some one suggest me how to make changes in company code global data (t code oby6). I want to assign 1 to co code > co Area which is blank.
    Thanks in advance

    Hi,
      actually if you want to change co code > co Area , it is under controlling (maintain controlling area), transaction code  OX06 .You change the assignment control and save it. It is automatic update you COmpany code global data.
    *give me a point if my answer solve your problem.
    Thank You.
    -akma-

  • How to batch change the standard value of routing

    Dear all,
             I meet a problem, and need you help.
            As you know, we can use T-code "CS20"  to batch change a component's quantity in different Bom by a factor.
           for example:  Component a in Fert. A,  quantity change from 6g x 0.9 = 5.4g
                               Component a in Fert. B,  quantity change from 8g x 0.9 = 7.2g
           now, my question is how to Batch change the standard value in routing. (select by work center)  CA85N can select the value, but seems can not batch change by a factor,
           thanks in advance

    It is not a big task for u prasobh...Just play in CEWB for 5-10 mins you will understand everything....
    If you face any issue let me know..
    For ur information I am also an IBM employee...
    Gobi

  • How i can change to standard user, an admin user

    Hi,
    How I can change to standard user an admin user, if the check box can not be unchecked.
    I have opened the lock to allow for future changes.
    I have more than one admin user.
    As root user, I can't do it.
    Thanks.

    Hi,
    I have, but looks the same, unable to change.
    I finally decided to create a new standard user and delete this.
    Thanks for the support.

  • How to make changes in default toolbar

    hi
    i m using oracle forms 6 and i want to know either it is possible to change in the default toolbar or not if so plz let me know how to make changes in default toolbar and re-adjust according to my need.i know how to create new toolbar and connect with form but i don't know whether this is possible to re-arrenge and change the default toolbar attached with forms.
    thnx in advance

    thnks for ur reply. i worte that i m using forms 6i so that ur reply do not fullfill my query.
    i posted my query because i have seen an application developed in oracle form 6 and he designed exactly the same iconic toolbar as we see normal while running the forms and i tried but could not able designed accordingly as button don't have "bevel" property and button we use .ico extension if we want to use icon buttons.now i m astonised if there is not any way make changes then how he did.

  • How to make changes in strong password policy

    hi,
    how to make changes in strong password policy.
    I m using apex 4.2.
    pls help

    1003090 wrote:
    I created a login page, but when i m putting a password or more then 7 character then in place of Invalid Login Credentials , its saying
    ORA-06502: PL/SQL: numeric or value error: character string buffer too small.
    I need to put a password of min 8 character, since its taking not more then 7 so i cannot use validation for the same.You already have a thread open on that: +{thread:id=2532900}+. Continue with that issue there.
    If the original question above relating to how to configure password policies is answered then close this thread.

  • How to make changes in deduction column in IT 2006

    Hi All,
    Scenario: Employee had a sick leave & casual leave quota 6 days in a financial year.
    Now the employee had used all his sick leaves and casual leaves and the leaves got exhausted pertaining to this quota.
    These days are reflecting in 2001 IT as leaves taken  but the deduction did'nt happen in IT 2006
    Can anyone tell how to make changes in the deduction column for specific employee code's
    Regards,
    Srikanth

    Hi Megha,
    The assignment is properly mapped to counting rule.. Issue is with the validity intervals. SInce the employee already availed the leaves the quotas cannot be deleted in the IT 2006. Issue resolved by making some changes in the deduction column through SQL table entry..
    Really appreciate your response..
    Regards,
    Srikanth

  • HT204053 How to make changes on my payment Account

    How to make changes to my payment account.

    in my Complete Selection window I have the following:
    FACT TTY( * ) FIG( RefDate <= CurrentDate And JDT1_BalDueDeb + JDT1_BalDueCred <> 0 )  Group By TTY.Code ,FIG.Ref1 ,FIG.OJDT_Ref2 ,FIG.LineMemo ,FIG.RefDate
    in the XLS cells I have the following:
    =ixGet("JDT1_BalDueDeb")
    and
    =ixGet("JDT1_BalDueCred")
    If you need additional clarification let me know.
    regards, Sotos Soteriou

  • How to make VIP flag in transaction code fpp2 as non editable

    Hi everyone,
    Please guide me about:
    How to make VIP flag in T Code FPP2 as non editable only for some particular users?
    Is there any authorization object exists for this flag in FPP2 transaction?
    Actually there are many users who have authorization of transaction fpp2. But we want only some particular users should have authorization of making changes to this flag.
    Please guide with your valuable replies.
    Thanks and Regards

    Hi...MP Vashishth
    try to creat an Authorization Management ...  in customizing...
    Cross-Application Components --> SAP Business Partner --> Business Partner --> Basic Settings --> Authorization Management
    Creat an Grup..and others steps...!
    and when finish clic on Generate and Assin Authorization !!!
    I Hope it Help !
    regards
    Andre Frugulhetti
    Edited by: Andre Frugulhetti on Sep 22, 2009 9:38 PM
    Edited by: Andre Frugulhetti on Sep 22, 2009 9:39 PM

  • How to make changes in HR Form using Form editor

    Hi,
    I am new to hr-abap..And I am working on HR form editor..and I wanted to generate a pay-slip using the hr forms..I had copied the standard form..and I am making the changes into that..
    I want to add my own customization into it..like I wanted to display total in words...also, i wanted to display a message at the end of my report..This message should be allowed to change to end user...like for eg..Some Seasonal greetings...
    I am using Tcode pe51 to make changes in my form...
    Please tell me how to go about and where to implement all these changes so that they will get displayed in my form...Its urgent...

    When you go into HRFORM tcode, double click on your form name.
    It will take you to Customization window where you can drag and drop all additional data yo want on form.
    For designing and coding purpose click on the LAYOUT button on top of that window.
    This will open the form in SMARTFORM.
    Dont try to go directly as your Form name dont exist in Smartforms.
    Check this link for more info -
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYINT_FORMS.pdf
    Regards,
    Amit
    Reward all helpful replies.

Maybe you are looking for