How to make Changes to Brush Menu Button Template!

I know this should be easy, but I'm not having luck so I thought I'd ask the forum:
I am using the BRUSH template for a chapter index. The default chapter button drop zones for the video look as if they have a hazy effect over them. I'm trying in vain to make changes to this so the video appears crisp and clear but I can't find out how to modify these drop zones.
Can anyone help? Thanks!
Jenny

It's not the drop zones themselves, it's the "patches" that are used to fill the drop zones. The patches are Apple-supplied image files, difficult to locate. I don't know if they're editable but you want to make a copy of the entire template file before you go in and start messing with it.
bogiesan

Similar Messages

  • How to make a Previous/Next Menu

    Hi there.  This is my first time posting in the Adobe forums so please be patient if I don't do things correctly.
    I currently have the Adobe Web Design CS5 package and all the programs that come with it, but my question is specifically about Dreamweaver.  My computer is a Macbook with the latest operating system as far as I know.
    I've been trying to create a next/previous menu for parts of my own personal website.  It's http://www.aidenart.com . If you click on the link to the Concept Art page you should see a bunch of image thumbnails that act as links.  Click on any one of those images and you're suppose to see the full image from the thumbnail in a whole new page.  On the pages with the full images I would like to include, at the bottom, a jump menu so that a visitor can pick any of the pages that they might want to see (I already know how to do this part), but I would also like to include buttons which allow the visitor to visit the next image in the list and also the previous one in the list.  You know, a previous and next menu.  I've seen other websites using those kinds of buttons so I know it's possible somehow.
    By looking at the source code of some websites and doing a bit of research on my own, I think this can be done using javascript of some kind.  Maybe by using an "onClick" behaviour or something.  I looked at a few different web help sites, including W3 Schools, and I still haven't found any clear cut explanations on how to make a previous/next menu.  If someone could just show me the basic code for making a simple one that actual works then I could probably work from that.
    I would prefer it if I didn't have to bother with the dreamweaver extenstions section because most things listed in the exchange are something you have to pay for.  And for those of you who think I should just make individual links on each page, please keep in mind that I'll want to add more pages in the future.  Most likely a lot of pages.  I also want to be able to make previous/next menus for the comics section of my website for when I have more comic pages available, so I really need to know how to do this.
    I hope that was enough information for you guys.  I can try to provide code if you guys want although I'm not sure how that would help solve my current problem.

    Only way to do pagination effectively requires either a database or XML files containing your data.  Neither way is really for a beginner based on my experience with both.  And based on the size of your library right now, pagination isn't what you really need.
    If it is going to be an image gallery you could look into the php Gallery script if you have a mySQL database ( http://gallery.menalto.com/ ).  But for simple solutions.
    For even smaller solutions you can look to JQuery solutions.  They require minimal amounts of coding, mostly just file inclusions.
    http://galleria.aino.se/
    http://fancybox.net/
    http://www.twospy.com/galleriffic/#1
    It's just about finding one that meets your needs and gives you the ability to customize as you see fit.

  • How can I change a brush stroke to a pencil stroke after I've drawn it?

    How can I change a brush stroke to a pencil stroke after I've drawn it? Is this possible?

    h,
    As I (mis)understand it, (in effect) just by clicking the Reduce to Basic Appearance button in the Appearance palette (and setting the desired Stroke Weight, if different from 1pt).
    The Pencil Tool creates a uniform width path like the Pen Tool, producing Anchor Points like the Artbrush Tool. So when you reduce to basic appearance you will get a path corresponding/identical to the one you would create with the Pencil Tool.

  • How to make changes in default toolbar

    hi
    i m using oracle forms 6 and i want to know either it is possible to change in the default toolbar or not if so plz let me know how to make changes in default toolbar and re-adjust according to my need.i know how to create new toolbar and connect with form but i don't know whether this is possible to re-arrenge and change the default toolbar attached with forms.
    thnx in advance

    thnks for ur reply. i worte that i m using forms 6i so that ur reply do not fullfill my query.
    i posted my query because i have seen an application developed in oracle form 6 and he designed exactly the same iconic toolbar as we see normal while running the forms and i tried but could not able designed accordingly as button don't have "bevel" property and button we use .ico extension if we want to use icon buttons.now i m astonised if there is not any way make changes then how he did.

  • How to make changes in standard transaction ME51N.

    Hi,
       Can anyone tell me how to make changes in standard transaction ME51N.
       I want to call transaction AS01 by clicking on standard button create asset. Please do the needful.
    Regards.
    Aniruddha

    Hi anirudda
              As i understood from your question is that you want to add a new field 'CREATE ASSET' on me51n screen.
    If i am correct you can use 'MEREQ001' enhancement for this purpose and you can write you code in the exits available in this enhancement.
    Please check the documentation of this enhancement for more info.
    (Use Smod for this purpose)
    I hope it is helpful.
    Reward points
    Thanks,
    Prasanna

  • How to make a left side menu?

    I need to know how to make a left side menu for my site,  can anyone help me? I am new to macromedia dreamweaver MX. Thanks

    I prefer to use CSS styled lists for menus.  Very easy to edit later.  Web friendly for people and search engines.
    EXAMPLE:
    http://alt-web.com/TEMPLATES/3-col-fixed-layout.shtml
    Several FREE CSS menu systems here.
    CSS Express Drop-Down Menus  (tutorial)
    http://www.projectseven.com/tutorials/navigation/auto_hide/
    CSS Tab Designer creates 60+ CSS Styled Button and Tab Menus  (download)
    http://www.highdots.com/css-tab-designer/
    List-O-Rama  (DW Extension)
    http://www.dmxzone.com/go?5618
    CSS  Menu Maker (On-Line Menu Generator)
    http://www.cssmenumaker.com/
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    www.alt-web.com/
    www.twitter.com/altweb
    www.alt-web.blogspot.com

  • How to make changes in another program?

    Hi evrybody,
    how  to make changes from one program  to another program ?
    Changes should be reflecting in other program.
    thanx in advance n wud be surely Rewarded if answer is helpful.

    Hi Bharat,
    Thanx for the info.
    But what my requirement is , I'm scanning & reading another report into an Internal table. I want to change the Hyphen's
    '-' used in variable declarations of another program into Underscore '_' .
    My sample code is like this..
    Report Zmain.
    PARAMETERS:
      p_prog LIKE sy-repid,
      p_key LIKE stokex-str.
    Internal Table t_itab                                                *
    DATA:
      BEGIN OF t_itab OCCURS 0,
        line(256) TYPE c,
      END OF t_itab.
    *" Data declarations...................................................
    DATA:
      t_statements LIKE sstmnt OCCURS 0 WITH HEADER LINE,
      t_levels LIKE slevel     OCCURS 0 WITH HEADER LINE,
      t_tokens TYPE stokesx    OCCURS 0 WITH HEADER LINE,
      t_keywords LIKE t_itab   OCCURS 0 WITH HEADER LINE,
      w_i TYPE i,
      w_j TYPE i.
                            START-OF-SELECTION                           *
    START-OF-SELECTION.
      APPEND p_key TO t_keywords.
      READ REPORT p_prog INTO t_itab.
      SCAN ABAP-SOURCE t_itab
      STATEMENTS INTO t_statements
      LEVELS INTO t_levels
      TOKENS INTO t_tokens
      KEYWORDS FROM t_keywords
      WITH INCLUDES
      WITH ANALYSIS
      WITH COMMENTS.
                            END-OF-SELECTION                             *
    END-OF-SELECTION.
      LOOP AT t_statements.
        READ TABLE t_levels INDEX t_statements-level.
        w_i = t_statements-from.
        w_j = t_statements-to.
       IF t_statements-level > 0.
        WHILE w_i < w_j.
          READ TABLE t_tokens INDEX w_i.
          REPLACE '-' WITH '_' INTO t_tokens-str.
          w_i = w_i + 1.
        ENDWHILE.
       ENDIF.
      ENDLOOP.
    My called program is like this....
    Report Zcalled.
    DATA:
      w-var1 TYPE c,
      w-var2 TYPE c.
    DATA:
      fs_flight1 TYPE sflight,
      t_flight1 LIKE STANDARD TABLE OF sflight.
    START-OF-SELECTION.
      INCLUDE zinclude3.
      SELECT * FROM sflight
        INTO TABLE t_flight1
        WHERE carrid = 'AA'.
      SELECT * FROM sflight
       INTO TABLE t_flight1
       WHERE carrid = 'LH'.
    END-OF-SELECTION.
      LOOP AT t_flight1 INTO fs_flight1.
        WRITE: / fs_flight1-carrid,
                 fs_flight1-connid,
                 fs_flight1-fldate,
                 fs_flight1-price.
      ENDLOOP.
    Thanx very much.

  • How do you change a brush tool color in Photoshop13. The color chart that has always been on the right side of the screen is gone and I cannot find out how to turn it on

    How do you change a brush tool color in Photoshop13. The color chart that has always been on the right side of the screen is gone and I cannot find out how to turn it on

    I now have the pallete on the right side of my screen. But, I am unable to change the color of the brush. I move the eye dropper over red and click on it. A panel comes saying 'Pure Red', I click ok but the brush color does not change.
    David Miller
    [email protected]

  • Can any body tell me how to make changes in the print layout of Fb03.

    hi,
    Can any body tell me how to make changes in the print layout of Fb03.
    I want to add comapny address on the layout.
    Regards
    Mave

    If you mean the correspondence, you have to change the configuration in Financial Accounting -> AR and AP -> Business Transactions -> Outgoing Invoices -> Carry Out abd Check Settings for Correspondence. There, you need to assign your custom Program or Layout for the Correspondence Type (like SAP19) and Program.
    If you mean the display layout in transaction FB03, You can change a few settings, mainly with BKPF and BSEG fields. I don't think you can add company address, though.
    Good luck,
    Bhanu

  • How to make changes in strong password policy

    hi,
    how to make changes in strong password policy.
    I m using apex 4.2.
    pls help

    1003090 wrote:
    I created a login page, but when i m putting a password or more then 7 character then in place of Invalid Login Credentials , its saying
    ORA-06502: PL/SQL: numeric or value error: character string buffer too small.
    I need to put a password of min 8 character, since its taking not more then 7 so i cannot use validation for the same.You already have a thread open on that: +{thread:id=2532900}+. Continue with that issue there.
    If the original question above relating to how to configure password policies is answered then close this thread.

  • How to make changes in Format Payment Instructions Program in Payables

    Dear All,
    My requirement is to make changes in the Check Priting Template. When i do payment thru payments screen, then in view requests "Format Payment Instructions" Program was submitted.
    "Format Payment Instuctions" Program is having executable as "Java COncurrent Program".
    In Payment Administrator I have got the " Payment Process Profile". In this Profile Format "Laser Check FOrmat " is attached.
    From this java file how can i get the all xml tags which are used in "Laser Check Format".
    Now i want to get the list of all xml tags , how can i do that.
    Please help me.....
    Thanks in advacne
    SHeetal Mittal

    http://ora12apps.blogspot.com/
    Creating AP Checks in Oracle R12

  • How to make changes in deduction column in IT 2006

    Hi All,
    Scenario: Employee had a sick leave & casual leave quota 6 days in a financial year.
    Now the employee had used all his sick leaves and casual leaves and the leaves got exhausted pertaining to this quota.
    These days are reflecting in 2001 IT as leaves taken  but the deduction did'nt happen in IT 2006
    Can anyone tell how to make changes in the deduction column for specific employee code's
    Regards,
    Srikanth

    Hi Megha,
    The assignment is properly mapped to counting rule.. Issue is with the validity intervals. SInce the employee already availed the leaves the quotas cannot be deleted in the IT 2006. Issue resolved by making some changes in the deduction column through SQL table entry..
    Really appreciate your response..
    Regards,
    Srikanth

  • Flash cs3: how to make moving/scrolling photo menu left and right?

    http://media.moma.org/subsites/2008/miro/flashsite/index.html
    - click continue, then relative size link
    How can I do this with lash cs3: how to make moving/scrolling
    photo menu left and right?
    When you move left and right and paintings move. and when you
    click on a painting, you see the the title and it links to another
    page on the site.

    scene_mc start at x = -550... x wide is 2164 px
    now I have this and its working...
    navL_mc.addEventListener(MouseEvent.MOUSE_OVER, navL_Over);
    navL_mc.addEventListener(MouseEvent.MOUSE_OUT, navL_Out);
    function navL_Over(e:MouseEvent){
              if(scena_mc.x == 0){
                                  scena_mc.x == 0;
              else if(scena_mc.x <= -10){
                                  scena_mc.x += 10;
                                  navL_mc.addEventListener(Event.ENTER_FRAME, runL);
    function runL(e:Event):void{
              if(scena_mc.x == 0){
                                  scena_mc.x == 0;
              else if(scena_mc.x <= -10){
                                  scena_mc.x += 10;
    function navL_Out(e:MouseEvent){
              navL_mc.removeEventListener(Event.ENTER_FRAME, runL);
    navR_mc.addEventListener(MouseEvent.MOUSE_OVER, navR_Over);
    navR_mc.addEventListener(MouseEvent.MOUSE_OUT, navR_Out);
    function navR_Over(e:MouseEvent){
              if(scena_mc.x == -1164){
                                  scena_mc.x == -1164;
              else if(scena_mc.x >= -1154){
                                  scena_mc.x -= 10;
                                  navR_mc.addEventListener(Event.ENTER_FRAME, runR);
    function runR(e:Event):void{
              if(scena_mc.x == -1164){
                                  scena_mc.x == -1164;
              else if(scena_mc.x >= -1154){
                                  scena_mc.x -= 10;
    function navR_Out(e:MouseEvent){
              navR_mc.removeEventListener(Event.ENTER_FRAME, runR);

  • How to make email link with a button with AC2 in flash cs3?

    How to make email link with a button with AC2 in flash cs3?
    I wrote this, but it does not work:
    btn_emailinfo.on (release) {
    getURL("mailto:"[email protected]");
    }

    I am guessing you put that on a frame?
    If so, the syntax is as follows:
    btn_emailinfo.onRelease = function(){
    getURL("mailto:[email protected]");
    Though, if you are placing it directly on the button itself,
    the syntax is:
    on(release){
    getURL("mailto:[email protected]");
    }

  • How do I change my brush opacity in Photoshop CC 2014

    I can't change my brush opacity. I have the change brush hardness with HUD picker unchecked on my settings, but when I Alt+Right Click+Drag up or down, left or right, it only changes my brush size. How do I change my brush opacity?

    On Windows, Control + Alt + up/down changes Opacity.
    Gene

Maybe you are looking for