How to make chapters in iMovie for iDVD?

A long time ago, in iMovie HD, you could make chapters, and iDVD would honor them. Perhaps I still can in iMovie 11, but I can't find it. Please let me know if it is still possible, and how.
Maybe they are not called chapters?
John C

Hi
There are Chapters in iMovie'11
Project window - You have to select a project to be edited - so that just this show up - top and right hand corner there are two small brown/red things (to the right of the three blue squares) that Mark or Chapter-mark
Things reg. Chapters
• Do not set any Chapter mark at - VERY beginning or End - as iDVD want's to do this by it self and get's confused
• Do not set any Chapter mark in or within (2 sec from) any Transition !
(This You can do a work around if You MUST - Export out movie as a Full Quality QuickTime .mov file then re-import this into iMovie and use this in a NEW Project - and now You can set Chapters in transitions without any problem)
• When delivered to iDVD - DO NOT GO BACK to iMovie or FCE/P to make any adjustments - This set off the iDVD BUG resulting in that all Chapters points to Chapter one.
If done Medicine is to trash movie in iDVD and clean Media Assets - then re-import - or start a new iDVD project
AND
I never use "Share to iDVD" as results get's bad to me - I do "Share to Media Browser" and as Large and in iDVD import from this.
Best result I get is by using iMovie HD6 or FinalCut Express or Pro as they don't discard every second line as iMovie'08 or 09 or 11 does.
Yours Bengt W

Similar Messages

Preparing movies in iMovie for iDvd

Hi All: I'm using the latest iMovie & iDVD versions. Can anyone point me to information on how best to prepare your movies for iDVD creation? After a trip to Africa I have imported the events which are already listed as day 1, 2 etc. However many different scenes appear in each day. Any suggestions as to articles to read etc are welcomed!
Thanks, Jill

Hi
Do You have iMovie HD 6 ?
What kind of Camera did You use ?
If miniDV tape 4x3 Camera (interlaced TV-standard) then I would use iM6 and
when edited and done just close iM6 and start an iDVD project and IMPORT the
movie into this.
This to obtain max quality.
iM08 and 09 discards every second line yielding in a quality equal to VHS.
Never figured out howto get around this - I got the impression that it could
be done but never succeded in doing it.
Karsten might know.
Tutorials
iDVD 5. http://www.kenstone.net/fcphomepage/idvd_5stone.html
iLife6. http://www.apple.com/ilife/tutorials/
iMovie HD 6. http://manuals.info.apple.com/en/iMovieHD_6_GettingStarted.pdf
iLife08 and Mac OS X.5. http://www.apple.com/ilife/tutorials
iMovie08 and Mac OS X.5. http://www.apple.com/ilife/tutorials/#imovie
iDVD08 and Mac OS X.5. http://www.apple.com/ilife/tutorials/#idvd
Karsten Schluter . http://karsten.schluter.googlepages.com/im08tricks
Podcasts Apple
- Find Out How - Document Apple
- Find Out How - Mac OS X Apple
- Find Out How - Movies Apple
- Find Out How - Music Apple
- Find Out How - Photos Apple
- Find Out How - Web
Books.
David Pogue's books.
• iMovie HD the Missing Manual
• iMovie 6 & iDVD The Missing Manual
• iMovie’08 & iDVD The Missing Manual
• iMovie’09 & iDVD The Missing Manual
• Final Cut Express, Video Editing for the Digital Enthusiast. Apple Pro Training Series. Diana Weynand
• Making iMovies. Scott Smith
• Final Cut Express User’s Manual
• Final Cut Pro User’s
Yours Bengt W

How to make a good referencing for my web site

hi. i start with muse and would like to know how to make a good referencing for my web site; thanks for your answers...

Google and search the forum for: SEO or Search Engine Optimisation

How to make saved IR available for all users

Hi,
I've created IR and saved it to several tabs based on search conditions.
But they're only visible for developers.
How to make these tabs available for all end-users ?
Does version 4.0 support this option ?
Thank you!

Hi
At present this feature is not included, although I believe it may be in 4.0. Many people have provided workarounds for this. None of which I have tried. I cannot find the original thread but here is a solution from a chap called Ruud
>
One way to share your saved reports with others is to 'Publish' your report settings to a few intermediate tables in your application and have other users 'Import' your settings from there. The reason for using intermediate tables is so that not all your saved reports need to be 'visible' to other users (only those that you've chosen to publish).
Basically you have available the following views and package calls that any APEX user can access:-
- flows_030100.apex_application_pages (all application pages)
- flows_030100.apex_application_page_ir_rpt (all saved reports - inclusing defaults and all user saved reports)
- flows_030100.apex_application_page_ir_cond (the associated conditions/filters for above saved reports)
- wwv_flow_api.create_worksheet_rpt (package procedure that creates a new saved report)
- wwv_flow_api.create_worksheet_condition (package procedure that creates a condition/filter for above saved report)
The way I've done it is that I've created 2 tables in my application schema that are straightforward clones of the 2 above views.
CREATE TABLE user_report_settings AS SELECT * FROM flows_030100.apex_application_page_ir_rpt;
CREATE TABLE user_report_conditions AS SELECT * FROM flows_030100.apex_application_page_ir_cond;
( NB. I deleted any contents that may have come across to make sure we start with a clean slate. )
These two tables will act as my 'repository'.
To simplify matters I've also created 2 views that look at the same APEX views.
CREATE OR REPLACE VIEW v_report_settings AS
SELECT r.*
p.page_name
FROM flows_030100.apex_application_page_ir_rpt r,
flows_030100.apex_application_pages p
WHERE UPPER ( r.application_name ) = <Your App Name>
AND r.application_user 'APXWS_DEFAULT'
AND r.session_id IS NULL
AND p.application_id = r.application_id
AND p.page_id = r.page_id;
CREATE OR REPLACE VIEW v_report_conditions AS
SELECT r.*
p.page_name
FROM flows_030100.apex_application_page_ir_cond r,
flows_030100.apex_application_pages p
WHERE UPPER ( r.application_name ) = <Your App Name>
AND r.application_user 'APXWS_DEFAULT'
AND p.application_id = r.application_id
AND p.page_id = r.page_id;
I then built 2 screens:-
1) Publish Report Settings
This shows 2 report regions:-
- Region 1 - Shows a list of all your saved reports from V_REPORT_SETTINGS (filtered to only show yours)
SELECT apex_item.checkbox ( 1, report_id ) " ",
page_name,
report_name
FROM v_report_settings
WHERE application_user = :APP_USER
AND ( page_id = :P27_REPORT OR :P27_REPORT = 0 )
ORDER BY page_name,
report_name
Each row has a checkbox to select the required settings to publish.
The region has a button called PUBLISH (with associated process) that when pressed will copy the settings from
V_REPORT_SETTINGS (and V_REPORT_CONDITIONS) into USER_REPORT_SETTINGS (and USER_REPORT_CONDITIONS).
- Region 2 - Shows a list of already published reports in table USER_REPORT_SETTINGS (again filtered for your user)
SELECT apex_item.checkbox ( 10, s.report_id ) " ",
m.label,
s.report_name
FROM user_report_settings s,
menu m
WHERE m.page_no = s.page_id
AND s.application_user = :APP_USER
AND ( s.page_id = :P27_REPORT OR :P27_REPORT = 0 )
ORDER BY m.label,
s.report_name
Each row has a checkbox to select a setting that you would like to delete from the repository.
The region has a button called DELETE (with associated process) that when pressed will remove the selected
rows from USER_REPORT_SETTINGS (and USER_REPORT_CONDITIONS).
NB: P27_REPORT is a "Select List With Submit" to filter the required report page first.
Table MENU is my application menu table where I store my menu/pages info.
2) Import Report Settings
This again shows 2 report regions:-
- Region 1 - Shows a list of all published reports in table USER_REPORT_SETTINGS (filtered to show only other users saved reports)
SELECT apex_item.checkbox ( 1, s.report_id ) " ",
m.label,
s.report_name,
s.application_user
FROM user_report_settings s,
menu m
WHERE m.page_no = s.page_id
AND s.application_user :APP_USER
AND ( s.page_id = :P28_REPORT OR :P28_REPORT = 0 )
ORDER BY m.label,
s.report_name,
s.application_user
Each row has a checkbox to select the setting(s) that you would like to import from the repository.
The region has one button called IMPORT that when pressed will import the selected settings.
It does this by using the 2 above mentioned package procedure to create a new saved report for you
with the information form the repository. Be careful to match the right column with the right procedure
parameter and to 'reverse' any DECODEs that the view has.
- Region 2 - Shows a list of all your saved reports from V_REPORT_SETTINGS (filtered to only show yours)
SELECT page_name,
report_name
FROM v_report_settings
WHERE application_user = :APP_USER
AND ( page_id = :P28_REPORT OR :P28_REPORT = 0 )
ORDER BY page_name,
report_name
This is only needed to give you some feedback as to whether the import succeeded.
A few proviso's:-
a) I'm sure there's a better way to do all this but this works for me :-)
b) This does not work for Computations! I have not found an API call to create computations.
They will simply not come across into the repository.
c) If you import the same settings twice I've made it so that the name is suffixed with (2), (3) etc.
I did not find a way to update existing report settings. You can only create new ones.
d) Make sure you refer to your saved reports by name, not ID, when matching APEX stored reports and the
reports in your repository as the ID numbers may change if you re-import an application or if you
auto-generate your screens/reports (as I do).
Ruud
>
To me this is a bit too much of a hack and I personally wouldn't implement it - it's just an example to show it can be done.
Also if you look here in the help in APEX Home > Adding Application Components > Creating Reports > Editing Interactive Reports
...and go to the last paragraph, you can embed predicates in the URL.
Cheers
Ben
http://www.munkyben.wordpress.com
Don't forget to mark replies helpful or correct ;)
Edited by: Munky on Jul 30, 2009 8:03 AM

How to make warehouse field inactive for all users in all documents autom.

Hi All,
Can anyone pls tell me "**how to make warehouse field inactive for all users in all documents without having to do it through form setting** "for each and every user. It should be visible but inactive
Thanks & Regards,
Mukesh Agrawal

Hi,
As a work around create a warehouse SelectWH and map the mandatory acoounts as a On hold account(in chart of accounts).So there will not be any posting on this account.
And set this warehouse as default warehouse for all users.
So without selecting the appropriate warehouse the user can not add the document.
I think this might resolve you issue.

How to make jar files availabe for deployed EJBs

Hi,
I'm interested on how to make jar files availabe for deployed EJBs.
My EJB is packed in an ear. It uses a util jar. I now just add the jar to the
classpath, but I think that shouldn't be the way. Is there somthing in the admin
console to make jars available or do I have to insert it in the ear file? And
if so, where do I hve to place it?
Thanks
Claudia

Put the util.jar in the ear with your ejb jars - at the same level (i.e. in
the root) - but do not include them in the manifest.xml.
Also each ejb jar that refers to util.jar must have util.jar on its internal
classpath in the manifest.
"Claudia" <[email protected]> wrote in message
news:3d537db5$[email protected]..
>
Hi,
I'm interested on how to make jar files availabe for deployed EJBs.
My EJB is packed in an ear. It uses a util jar. I now just add the jar tothe
classpath, but I think that shouldn't be the way. Is there somthing in theadmin
console to make jars available or do I have to insert it in the ear file?And
if so, where do I hve to place it?
Thanks
Claudia

How to make a group contacts for iphone 4s, How to make a group contacts for iphone 4s

How to make a group contacts for iphone 4s

Or there are apps
https://www.google.co.uk/url?sa=t&source=web&cd=3&ved=0CEEQFjAC&url=https%3A%2F% 2Fitunes.apple.com%2Fgb%2Fapp%2Ftext-2-group-fast-sms-imessage%2Fid519077434%3Fm t%3D8&ei=WCkfUc6vE8THtQavlYCoBw&usg=AFQjCNHnoWUqJ9AMYWCadVceOkq-6Ed4Vg

How to make the logs captured for Z fields in ME21N/ ME22N

Hi
I have devloped new tab(Screen) and added Z field in the PO header (ME21N) as per my requirement. But whenever I do changes to the perticular Z field, logs are not captured (ME21N->ENVIRONMENT-->HEADERLOG). How to make the logs captured for Z fields like standard fields. Is there any way?
Regards
Raj.

HI Ranjitha
For the data element of Z fields go to further caracteristics of tab and make change document checkbox ticked.

How to make a portlet unvisible for another(not Owners) Users?

Hi all,
I (Site-Owner) have create a little Portal-Site with any portlets.
I want to make one or two portlets(Admin-Area) unvisible for other users. But when I create a portlet as Site-Owner, then all another users can they see.
How to make a portlet unvisible for another users?
Regards
Leonid Pavlov

You can hide and show portlets of Web providers (OmniPortlet, Web Clipping, and Java portlets) on portal pages dynamically. This functionality is controlled by security managers. The PDK provides a number of security managers. For example:
o Group security manager: The group security manager makes the portlet appear to users who are members of a specified group, while hides the portlet for those who are not members.
o Authentication level security manager: You can use the authentication level security manager to control access to the portlets based on the users authentication level. For example you may hide the portlet from public users, but display it to authenticated users.
In addition to the security managers provided by the PDK, you can build your own security managers.
Although OmniPortlet and Web Clipping do not expose security managers through the user interface, you can apply them by editing their XML provider definition file.
For PL/SQL portlets you can use the is_runnable method to control whether the portlet is hidden or shown.
Peter

How to make a loop run for specific period of time ?

hello !
i'm new to labview and could'nt found how to make a loop run for 2 sec for example, and then to exit.
Solved!
Go to Solution.

Hi Hookso,
You can do it using the different loops like While loop and For Loop. Roderic has already stated how to do it using a for loop. I have illustrated in the attached vi how to do it using a while loop and Elapsed Time function. Take a look.
Regards,
Nitzz
(Give kudos to good Answers and Mark it as a Solution if your problem is Solved)
Attachments:
Untitled 2.vi ‏36 KB

How to make custem sized book for example 12inch x 8 inc, 18 inch x12 inch

how to make custem sized book for example 12inch x 8 inch, 18 inch x12 inch

I'm afraid there is no way to do this currently available.

I can take video made in Photo Booth and use in my Smilebox greetings and I can use photos from iPhoto to use there also. I have not been able to figure out how to take clips from iMovie for that.

For anyone who has used "Smilebox" for greeting cards: I can take video made in Photo Booth and use in my Smilebox greetings and I can use photos from iPhoto to use there also. I have not been able to figure out how to take clips from iMovie for use with Smilebox.

For anyone who has used "Smilebox" for greeting cards: I can take video made in Photo Booth and use in my Smilebox greetings and I can use photos from iPhoto to use there also. I have not been able to figure out how to take clips from iMovie for use with Smilebox.

Does anyone here know how to make a background soundtrack for a Tai Chi Video?

Good morning,
Does anyone here know how to make a background soundtrack for a Tai Chi Video in Garageband. I have been looking around at the different sounds and music in Garageband but I have not been able to find anything that would go with the video.
Here is an example of a Tai chi video if you were wondering
http://youtu.be/a6pJf2otwv8
I want to create something like this for a video I did for a fitness gym for a Yoga instructor and Tai Chi instructor.
Any tips would be appreciated.

Brandon,
you will not have to do any importing in GarageBand. Intalling Mainstage will extent GarageBands Loop Library and Instruments Library.
After you installed MainStage the additional loops and Instruments will show in GarageBand just like all other Loops. you will simply see more loops.
For example:
or:

HT4528 i am new to iphone. i downloaded a song but don't know how to make it my ringtone for incoming calls. can someone help?

I just got an iphone4. I downloaded a song but i don't know how to make it my ringtone for incoming call. Can someone help?

YOu can't use the whole song for a ringtone, you would have to create one 30 second or less.
YOu can download an app to create the ringtone.

How to make a DKIM signature for outgoing messages in Thunderbird (SMTP-server does not support DKIM)?

SMTP-server does not support DKIM signature.
How to make a DKIM signature for outgoing messages in the Thunderbird?

I'm not familiar with this particular use of the terminology.
Thunderbird has S/MIME support built in. You can add PGP support via the Enigmail add-on. Both offer the means to sign and encrypt messages.
I see add-ons to support the checking of DKIM-signed incoming messages, but haven't found any yet for signing.
Is it something that an email client is entitled to do? The Wikipædia entry says
<blockquote>Both modules, signing and verifying, are usually part of a mail transfer agent (MTA).</blockquote>
and that means a server, as opposed to a client (MUA).

How to make chapters in iMovie for iDVD?

Similar Messages

Maybe you are looking for