How to make chords by making the notes end at the same time

Hello!
I have joined two tracks hoping to create a chord. However, the notes do not end at the same time so the chord is not achieved. I am wondering how to create a chord, mainly how to make it so the notes in a chord end at the same exact time. Any help is greatly appreciated! thank you!

You already posted this in another thread. Why start another?
http://discussions.apple.com/message.jspa?messageID=9873386#9873386
It just makes it harder for people to help you and for others looking for answers. If you still need help you can just "bump" the original thread.

Similar Messages

How to make a circle and a line ending (at the centre of the circle) lock and move together?

I'm new to Illustrator and perhaps it's not the best software of CS6 Master for doing this, but:
I have a few (13) circles, they are connected with lines (one line from the centre of a circle to the centre of the next one, so 13 connecting lines). I need to move the circles around in order to create the appearance that suits me best, but I want the connecting ending to move together (see picture below). I need to do this often and get an immediate visual feedback. How do I do it? Am I using the wrong software altogether?
Thanks in advance to all who will try and help out!

Here's a way of doing it with the Appearance panel and multiple fills converted to an ellipse.
1 You create your path with all the segmentts you require can be an open or closed path.
2. Convert the fill only to an Ellipse. Effect>Convert to Shape>Ellipse (use the Absolute option and give it the dimension you want the circle to be) (cn cahnge this at anytime in the future as well as the color of the circles)
3. Using the Effect>Distort and Transform>Transform move the circle fill to a position corresponding to an anchor of the path as to position the circle with the nchor as the center.
4. In the Appearance panel Option (Alt) drag the fill with the convert to ellipse and the transform down or up to duplicate it, or se the flyout of the Appearance panel to duplicte the fill.
(do this for each circle you need) You will only have to adjust the transformation vertical and horizontal positions, Bith effects will be duplicated when you copy the fill so you only adjust the transformeffecct that is already associated with the fill.
Like this:

In windows 7, how to make firefox start automatically when I turn on the computer

In Windows 7, how to make Firefox start automatically when I turn on the computer. Note, I am asking how to do this with Windows 7, not xp, not vista.

You need to place a shortcut to open Firefox in the Start > Programs > Startup folder.<br />
That is basically the same in all Windows versions.

Speed dial only has one icon, to open up the windows. Another used to be on the other end of the tool bar for entering websites into the windows. Also do not know how to form another group.

I have just downloaded Firefox into a new computer. The firefox I had in my old computer had one (9 pt) icon at one end that brought up the speed 9 speed dial windows. It also had another similar icon at the other end of the tool bar that you could click on and place a website you were looking at into a particular window. This add on does not have that feature, which makes it very hard to make entries into the windows.
Also I have not found the way to add other groups of windows as I had before. I could even label them in categories. What to do?
My Computer is an HP p6653w and my default browser is Firefox 3.6
My operating system is windows 7.

Hi,http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03149924&cc=uk&dlc=en&lc=en#N89
First, I am sorry to see your experience, however be aware that this forum is a peer-to-peer community and not a direct contact with HP.
To clarify, the product specification do list the ink cartridges regionalization, the specifications itself reffer to HP Suresupply to locate the ink cartridges for your region, as well as the following document which clearly state that information:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03239171&tmp_task=prodinfoCategory&cc=uk&dlc=en...
Firs be sure to have the latest software installed prior contacting HP support, which should be listed as 28
You may find that information listed in the following document (Check the How can I tell which driver version I have? section), if you have any older version be sure to uninstall it and install the latest software, as listed within the same document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03149924&cc=uk&dlc=en&lc=en#N89
If you need, the latest software can be found below:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-108821-3&cc=uk&dlc=en&lc=en...
Next ensure you have any of the 564 ink cartridges, once the printer being reset it require all the 4 ink cartridges to work
Finally check the private messages I sent you prior contacting HP support , the envelope icon at the top-right part of that screen.
The ensure you use the correct contact details lease double chekc it below:
http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How to make google come up and not yahoo when i click anew tab

how to make google come up and not yahoo when i click a new tab
== This happened ==
Every time Firefox opened
== today

You can use 1 of these add-ons
[https://addons.mozilla.org/en-us/firefox/addon/newtaburl/?src=search
NewTabURL ]
[https://addons.mozilla.org/en-us/firefox/addon/new-tab-homepage/?src=search New Tab Homepage]
with NewTabUrl you have more options
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

How to make selection parameter gray out, not changeble mode

Hi Experts,
Selection screen having parameters, I am putting default values in that parametrs.
How to make this parameter gray out, not changeable mode.
Thanks in advance
mahahe.
See comments below
Edited by: Rob Burbank on Jul 1, 2009 12:43 PM

Hi,
For the parameters required, while declaring them use the MODIF ID, lets say you have choosen the modif id as SC1.
i.e. parametes: p_mat type matnr DEFAULT '100' MODIF ID SC1.
Then in the initialization event, code as below.
    LOOP AT SCREEN.
      IF screen-group1 = 'SC1'.
        screen-input = '0'.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
It will work.
Regards,
Nangunoori.

How to make oracle is case insentive ( not case sensitive)

SqlServer by default is NOT case sensitive (data content) while Oracle by default is case sensitive (data content).
please help me to give the solution
How to make oracle is case insentive ( not case sensitive)
if there is anyway to make Oracle behave like SqlServer changing NLS settings or any other Oracle settings?
I have solution for application level . it is working fine
Possible solutions:
1. You want to store data case insensitive: do an 'insert...
values(upper('Abcd'))...'.
This will put your data in upper case into the tables.
2. Your data will be mixed-case and you want to select them case
insensitive:
create 'function based indexes' on every column you want to use in
your where-clauses.
Then 'select ... where <column_name> = 'ABCD'.

What version of Oracle? Oracle 10g has a capability that can toggle this feature on and off at the session level. Prior versions do not.
For prior versions you usually have to make use of the upper and/or lower functions in your queries. Sometimes a function based index, FBI, is used to handle this.
HTH -- Mark D Powell --

How to make a select list editable or searchable like the combobox

Does anybody know, How to make a select list editable or searchable like the combobox? Do we need a plugin here, where I can get it.

Hi Nilesh,
If this is what you are looking for http://apex.oracle.com/pls/apex/f?p=32395:3:1202144397644679
get the combobox plug-in
http://www.apex-plugin.com/oracle-apex-plugins/item-plugin/searchable-combobox.html
I have not tried this though. Found it while searching for some other plug-ins.
Regards,
-Senthil

How to Uninstall Yosemite? System does not allow Erase the HD, nor does it allow re-install of original O/S Disc (10.6.7). I want Mavericks or even Lion Back.   Thanks.

How to Uninstall Yosemite? System does not allow Erase the HD, nor does it allow re-install of original O/S Disc (10.6.7). I want Mavericks or even Lion Back.   Thanks.

Start with reinstalling Snow Leopard:
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. After you finish Setup Assistant will complete the installation after which
         you will be running a fresh install of OS X. You can now begin the update process
         by opening Software Update and installing all recommended updates to bring your
         installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1 Access the App Store to download Mountain Lion or Yosemite. Mavericks is no longer available since the release of Yosemite. If you purchased Mountain Lion from the App Store, then you can redownload it via your Purchases page in App Store. If not, then you will need to purchase it from Apple;
Purchase a redemption code at the Online Apple Store: OS X Mountain Lion. Mountain Lion is $19.99 plus tax. Use the code to redeem a download of Mountain Lion from the App Store. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.

I backed up my ipod during a windows backup. how do i find those ipod files(not itunes) in the windows backup files? i've tried searching and i can't find

i backed up my ipod during a windows backup. how do i find those ipod files(not itunes) in the windows backup files? i've tried searching and i can't find

so i plugged in my ipod and it asked if i wanted to backup the files before restoring it.
Do you mean iTunes asked if you wanted to backup files before restoring? If so the it is in the location I posted. You don't need to navigate to the backup. Once your restore your iPod it will ask if you want to restore from a backup and present you with the backups made before hand.
To restore information from a backup, use one of the following methods after connecting your iOS device to the computer with which you normally sync:
-Click the File menu and select Devices > Restore from Back up.
Or
-Open the iOS device's Summary tab. There are two ways to access this:
-Click the device button in the upper right corner. (If viewing the iTunes Store, click the Library button in the upper right corner. The device button will then be visible.)
-From any view in iTunes, click the View menu and select Show Sidebar. Select your iOS device in iTunes under Devices.
-Click the Restore Backup button.

How do I get the keyboard in the notes section of the ipad to pop up? It was working all day today and then stopped working.

How do I get the keyboard in the notes section of the ipad to pop up? It was working all day today and then stopped.

I find it's touchy. Tap anywhere on the note to bring up the keyboard. If you tap and hold, you won't bring up the keyboard. Just tap momentarily.
If you can't get it to work, try restarting your iPad. Press and hold the Sleep/Wake button until a red slider appears, then drag the slider. Then press and hold the Sleep/Wake button until the Apple logo appears.
If it still doesn't work, try resetting your iPad. Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears.

I want the reload button to appear outside the address bar (on the left, next to the back and forward buttons), not at the extreme end of the address bar. How can I do this?

I want to re-position the reload button to appear outside the address bar (on the left, next to the back and forward buttons), not where it is at the moment, which is at the extreme end of the address bar and is a real hassle to use. How can I do this?

To move the Stop and Reload buttons to their position to the left of the location bar you can use these steps:
* Open the Customize window via "View > Toolbars > Customize"
* Drag the Reload and Stop buttons to their previous position to the left of the location bar.
* Set the order to "Reload - Stop" to get a combined "Reload/Stop" button.
* Set the order to "Stop - Reload" or separate them otherwise (Space or Separator) to get two distinct buttons.

How to purchase Ipod Games from countries not included in the Ipod Store???

How to purchase Ipod Games from countries not included in the Ipod Store??? Could anyone tell me?

Hello kismet_kracker,
What happens if you place the iPod into Disk Mode with it still connected to your Mac? Does it then show up in Finder as a mounted drive? Here are instructions for putting your iPod into Disk Mode.
http://support.apple.com/kb/ht1363
B-rock

How to make a summary column appear only once (in the first page only) in SSRS 2008?

Hello Everyone,
How to make a summary column appear only once (in the first page only) in SSRS 2008?
Regards
Gautam S
Regards

Hi,
Assuming you have test data like this ;
select 'abc'as [GROUP],'NN' name , 1 id
union all
select 'abc' as [GROUP] ,'PP' name , 1 id
union all
select 'abc'as [GROUP],'RR' name , 2 id
Step1 : take Tablix with row group as your group Name .
Step2 : right Click on Row Group Details -> Delete-> Delete Group Only
Step3 : In Count Cell use below expression ;
=CountDistinct(Fields!id.Value)
Follow this link;
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/b6b45917-0a26-4d15-be46-2c6a2697d6e9/distinct-rows-sum?forum=sqlreportingservices#5ffdee06-c2c8-44ea-a3a5-b958488bb6b5
Thanks
Please Mark This As Answer or vote for Helpful Post if this helps you to solve your question/problem. http://techequation.com

HT5887 Air Drop does not transmit Contact info located in the Notes Section of the Contact. How does one transfer All Fields of a contact record?

Transferred a Contact from my iPhone 5S/ios7 to my iPad Air. Successfully transferred the Contact including all ph numbers, email addresses, and street addresses. But -- it did NOT transfer all the text in the "Notes" section of the original Contact. Why? Some of my Contacts also have a photo in the same Notes Section. I don't want to sync the devices via the cloud because I just want selected Contacts. Sharing via email does the same thing - no Notes. Only way I've found is to Sync with Outlook Contacts on my Windows XP and Windows7 PCs.

So far it appears Microsoft's Outlook program is the only contact manager capable of "Forwarding" a Contact record that is all inclusive of all the data in the Contact including the Notes data.
While some may use the Notes field to store "secret or confidential" information...I've used it to store more mundane Notes that are not NOT confidential or sensitive in any way. Moreover....only want to "Share" (Microsoft calls it "Forward") with my own multiple devices. The "Notes" data might include a picture, another type of image, a map, a URL, etc. I and the rest of the MS Windows user world began building Contacts in Outlook so long ago it is not practical to switch to iOS-based personal info management software unless it allows complete conversions or "Sharing" as Apple calls it.
Microsoft figured this out years ago by allowing the user to choose whether to include Notes or not when "Forwarding" any individual Outlook Contact Record. It sounds like we need Microsoft Outlook for iOS like we have MS Outlook for MAC. With thousands of Contacts in MS Outlook 2010 I can't do without the Notes data in my files. And it isn't practical to use a syncing function when I only need 10-20% of my overall contacts on some of my iOS devices.

How to make chords by making the notes end at the same time

Similar Messages

Maybe you are looking for