How to make Cmd-H hide extras like in AI and PS

This bugs me, since I primarily use AI. I'd like Cmd-H to Hide extras instead of hiding the app. I've tried to change the shortcut in the Keyboard shortcuts menu, but when I type it in it just hides InDesign. Is there a way to fix this in ID CC?

Well, I dunno about command+H, but I personally killed off some inaccessible-in-the-GUI keyboard shortcuts by manually editing ~/Library/Preferences/.GlobalPreferences.plist. Because I have some really bad keyboard shortcut problems and I was consistently command+Q-ing when my hands thought I was on my Windows keyboard at work and trying to alt-tab. It drove me nuts.
But I really do think that they exposed all of the shortcuts to editing in 10.7 or 10.8. I'm not sure, I'll check when I get home.

Similar Messages

How to make hovering over menu buttons like history, bookmarks and options, open thier expanded menu without hovering over the arrow next to them?

I'm at the tail-end of the "fix the newest update" and the last thing i wanna do before i head out the door is make it so that when i open the menu and hover over the things like history bookmarks and options, that their sub menus open when my mouse is hovering over the words or the arrows. right now the sub menus only open when i hover over the arrows.
I wanna make the words and their arrows a single button with the functional purpose of both.
Thank you in advanced for your time.

Are you using the Classic Theme Restorer extension?
*https://addons.mozilla.org/firefox/addon/classicthemerestorer/
That is one of the things that I noticed as well when using this extension. 
Maybe contact its developer to see if this behavior can be changed.

Please help : How to make the anomalistic table just like below?

Hi all,
How to make the anomalistic table just like below? Anyone can give the way detail or thoughtway ?
http://61.132.17.188/webber/table.gif

This is just a suggestion.
If you put your "JTable" in a "JScrollPane", then you can add any "java.awt.Component" to the corner of the "JScrollPane" -- using the "setCorner()" method (of "JScrollPane").
I would suggest making a custon "JPanel" and overriding its "paintComponent()" method to draw a diagonal line (and the required text) on it.
You can find out more about how to do this from the links I provided in my first reply.
Hope this helps.
Good Luck,
Avi.

Can someone tell me how to make the letters that look like fabric?

Can someone tell me how to make the letters that look like fabric?

pharrout wrote:
Can someone tell me how to make the letters that look like fabric?
It could be as simple as clipping an image of the fabric of your choice, to a text layer.
In this example the Hessian texture was downloaded from Google images, and placed over a Type layer. You then Alt (Opt) click the intersection of the Type and Hessian layer to clip them together. This just means that only the shape of the underlying layer will show in the clipped layer.

How to make site root-relative links work in DW and Server both?

See details on buggy DW image link behavior, below. My question is:
1) how to make site root-relative links work in DW and Server both? Or…
2) how to reliably automate the change of several hundred legacy root-relative links of the form
/images/image.jpg to document-relative?
That is, to
../images/image.jpg or
../../images/image.jpg or
../../../images/image.jpg etc…depending on where the directory is.
The old format (/images/image.jpg ) used to work fine in my previous DW 8 configuration but appear grey in DW after “upgrading” to DW cs5.5 mac. (they look fine on the server, but it’s hard to edit image-heavy pages locally when they are all grey).
I tried changing the files to how DW creates root relative links now:
/public_html/images/image.jpg, which is a very easy, attractive root flow since there’s a one-to-one mapping. These look great in DW but are broken on the server!
I looked at the “advanced” site setup, and it looked like it might be possible to nuke the /public_html/ part of my server info…but it also looked like there was the potential for doing damage changing these settings, which are automatically generated from our server connection settings, which seem to work.
The “links relative to document/ site root” toggle…does that change how DW interprets existing links, or just change the default when you are adding a link? I have made 80% of the file links document relative…before wondering if root-relative isn’t better?
It sure seems less ambiguous for all those images if theres a way to make root relative work for DW design view, DW link check, and server.
Summary of buggy behavior: (see test with images here)
"old style" site root link
      /images/img_book/WScover120x150_NEW.jpg
      Design veiw in DW: broken (grey w/ broken icon)
      Link check in DW: "external link" (i.e., uncheckable, + file could appear orphaned)
      Browser: good
      Ease of switching: n/a (existing format)
"new style" site root relative link
      /public_html/images/img_book/WScover120x150_NEW.jpg
      Design veiw in DW: good
      Link check in DW: good
      Browser: broken
      Ease of switching: easy
Document relative link
      ../../images/img_book/WScover120x150_NEW.jpg
      Design veiw in DW: good
      Link check in DW: good
      Browser: good
      Ease of switching: hard (how to automate?)
Absolute link
      http://www.oasisdesign.net/images/img_book/WScover120x150_NEW.jpg
      Design veiw in DW: broken (grey w/ broken icon)
      Link check in DW: external (i.e., uncheckable, + file could appear orphaned)
      Browser: good
      Ease of switching: n/a...not a real option
Thanks!
Similar discussion on "/"

Hello again Jon!
Thanks for jumping on this.
All clear and understood about where publc_html is etc.
No contemplation of nuking the actual public_html directory on the server, just the "/public_html" text string at the start of the DW-generated links.
"/public_html" is automatically added to the front of the link in DW if I create the link with any of the GUI tools, if I have "site root relative" selected. And ""/public_html" ends up in the code, and gets uploaded that way to the server, where it (obviously) doesn't work.
Doesn't sound like it is supposed to work this way. Also, what seems to be the usual root relative format (/images/image.jpg) shows as a broken link in the GUI and an external link in the DW link check. All this togther makes me thinkI have some obscure setting incorrect?
The setting that caught my eye is manage sites/ site setup/ advance settings/ local info/ web url, which is automatically set to http://www.oasisdesign.net/public_html/
it gives an option to change it but it makes every effort to make this NOT look like something users should mess with:
Having gone through the more careful thought process during this post, I'm ready to do the experiment of changing the remote server web URL (why is it wrong by default?)...think I'll eat dinner first so there's 45 min to avert disaster if anyone knows this to be a bad idea!
Art
PS--don't have a local testing server...don't think this will solve the GUI broken link/ link shows as external problems.
Is there an easy, automated way to change links sitewide from document to root relative?

How u will set the external parameters like packet size and number

How u will set the external parameters like packet size and number of parallel process.

Dear Karthik,
ALE:
Use Transaction UPSC02 - ALE Distribution Unit: Packet Types.
Performance Optimization for ODS Objects:
To ensure a good ODS object loading performance, take the following into account:
 1. Creating SIDs
The creation of SIDs takes a long time and can be avoided in the following cases by:
 Not setting the indicator for BEx Reporting if you are using the ODS object only as a data store. If you do set this indicator, SIDs are created for all new characteristic values.
 If you use line items (for example, document number or time stamp) as characteristics in the ODS object, in the characteristic maintenance, indicate these as Attribute Only.
SIDs are created in parallel if parallel activation is switched on (see last point). They are then created with the same number of parallel processes as created for the activation.
However, if you specify a server group or a special server in customizing, these specifications are not only valid for the activation, but also for the SID creation. The creation of SIDs runs on the application server on which the batch job also runs.
 2. DB partitioning in active data tables (technical A table)
By partitioning by database level, you can delete data from the ODS object much more quickly. As a partitioning criterion, choose the characteristic by which you want to delete. For more information on partitioning database tables, see the database documentation (DBMS-CD). Partitioning is supported by the following databases: Oracle, DB2/390, Informix.
 3. Indexing
Use selection criteria for queries for ODS objects. If the key fields are specified, the existing primary index is used. The more frequently accessed characteristic should appear on the left-hand side.
If you did not specify the key fields completely in the selection criteria (visible in the SQL trace), you improve the run time of the query by creating additional indexes. You can create these secondary indexes in the ODS object maintenance.
 4. Activation of data in an ODS object
To improve system performance when activating data in the ODS object, you can make the following entries in Customizing under SAP Customizing Implementation Guide -> SAP NetWeaver -> Business Information Warehouse -> General BW Settings -> ODS Object Settings:
 the maximum number of parallel processes when activating data in the ODS object as when moving SIDs
 the minimum number of data records for each data package when activating data in the ODS object, meaning you define the size of the data packages that are activated
 the maximum wait time in seconds when activating data in the ODS object. This is the time when the main process (batch process) waits for the dialog process that is split before it classifies it as having failed.
 the server group that needs to be used when activating the data in ODS objects in parallel You have to create the server groups beforehand using the following path: Tools -> Administration -> Network -> RFC Destination, RFC -> RFC Groups. If you do not specify anything here, then the activation runs on the server on which the batch process was started for activation. If a server from the server group is not active, then the activation is cancelled.
 5. Loading unique data records
If you only load unique data records (meaning data records with nonrecurring key combinations) into the ODS object, then the loading performance is improved when you set the indicator Unique Data Records in the ODS object maintenance.
The records are then updated more quickly because the system no longer needs to check whether the record already exists. You do have to be sure that there duplicate records are definitely not being loaded, because this will lead to termination.
Regards,
Naveen.

How to make a selection of a layer delete content and paste another content with Photoshop scripting..?

how to make a selection of a layer delete content and paste another content with Photoshop scripting..?

There is a more specific Forum …
Photoshop Scripting

How to make dyn/admin not to prompt for username and password?

Hello all
How to make dyn/admin not to prompt for username and password? I am writing a selenium job to automate cache invalidation to load test a production issue we are facing. Selenium is opening a fresh firefox session and prompting for username and password every time. I am also trying to modify my script such that it will use the same session again and not prompt for username and password. But I thought of asking this question in the group.
Your inputs will help a lot.
Thanks,
Sundar

Hi,
You can set enabled property of /atg/dynamo/servlet/adminpipeline/AuthenticationServlet/ to false. It will not prompt for authentication.
Gopi

How find the missing glyph using javascript [like indesign preflight], and replace same glyph available font or

The situation:
I want to use basetext font, but some of the glyphs are missing in it, and are highlighted with pink boxes. common font [stix, etc.] have much more glyphs than basetext font. I can apply common font [stix, etc.]manually for each of the missing glyphs or insert two character and use kerning set it up, but it is tedious.
Question:
How find the missing glyph using javascript [like indesign preflight], and replace same glyph available font or insert two character and use kerning set it up?
Any one know how to do this?
Thanks in Advance,
~Jack

Try Peter kehrl's script
http://www.kahrel.plus.com/indesign/missing_glyphs.jsx

Hi. I have a 2008 macbook pro 15.4 inch. Not abused but the hinge is stiff and the lid/ screen is starting to de-laminate at the bottom edge. Any ideas on how to make the hinge work a little more freely and how to re-seal the screen to the lid?

Hi. I have a 2008 macbook pro 15.4 inch. Not abused but the hinge is stiff and the lid/ screen is starting to de-laminate at the bottom edge. Any ideas on how to make the hinge work a little more freely and how to re-seal the screen to the lid?

When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

How to make a rasterized word look like it was written with dirt?

Im trying to make an image where this word looks like it is written in dirt on the sidewalk. Iv' already taken a pile of dirt and created a clip mask out of it but it doesnt look natural enough. How do I do this so it looks realistic? And this is a graphic not font and I am using photoshop cs6. Thank you.

I'll just add a little footnote to the above, while I'm thinking about it. One problem with layer styles - especially complex ones like Bevel & Emboss, is that you have limited control of the different aspects of the effect. I didn't use Bevel & Emboss in the above example because the highlights were too strong, and made it look wrong.
A way round this is to right click the effect and choose 'Create layers'. This breaks up the effect into one or more layers, so you can reduce, say, the highlight without effecting the shadow.
I think if I was trying to do a stand out job, I'd use a finer font, so it looked like it had been drawn with a stick, and I'd use a combination of Bevel and Emboss layer style to get the depth, but I'd also use JJ's idea of a displacement map clipped to the text layer, to roughen the edges realistically, and add texture to the bottom of the indented text.
An alternative is to find a suitable texture, and save it as a Pattern. That would make it available to use as a 'Texture' in the Bevel Emboss sub options. The beauty of this is that the texture works very much like a Displacement map with depth and lighting effects. In fact, I think that might be the easiest way to go about it.

How to make modifier keys lockable? (like Caps Lock for Ctrl or Alt)

Playing around with the non-modal text editor ne, I found myself wondering if one could simulate a modal interface (like vim has) by having something like "Ctrl Lock" or "Alt Lock" (analogous to Caps Lock) and thus a "ctrl mode"/"alt mode". I would like to try this, but I am not sure how to make it happen.
My best guess is that this could be accomplished via XKB, but its documentation looks pretty intimidating. Is anyone here proficient in XKB and could point me in the right direction?
Other ideas:
– Is this something that a terminal emulator could do? Is there already one that can do it?
– Or a shell?
– For console applications, would it be possible to have a small wrapper that did nothing but intercept keyboard input and just pass everything through to the wrapped process, except that it would take into account the desired lockable modifier key? (I am thinking of tput here, but from my first search it appears that it doesn't do this sort of thing.)

@Trilby: Thank you for the elaborate input!
@drcouzelis: "sticky keys" normally means that modifiers remain active only until the next keypress, while I want a way to lock them in active state for an arbitrary number of keypresses. But still, "sticky keys" was a worthwile input for the search engine.
The program xkbset, which can be used to set XKB options on the fly, has a function that comes very close to what I desire:
$ xkbset h
Usage: To set or unset various options:
xkbset <options>
where <options> may be all or any of (the '-' switches the feature off,
otherwise it is switched on):
To switch sticky keys on or off, and optionally set or reset:
() two keys pressed at the same time stops sticky keys;
() a modifier pressed twice will be locked:
[-]{sticky|st} [[-]twokey|[-]latchlock]...
I cannot select specific modiers to be affected with xkbset, but that would be fine with me. Sadly, it didn't completely work for me:
– It doesn't affect Alt at all for me.
– The effect seems to go away as soon as I change the window. (Maybe I need to invoke xkbset from .xinitrc for its effects to persist throughout the session? I will try that.)
So I went on and tried to configure XKB manually. I got up to a certain point without studying the documentation in-depth, but now I have landed on an error message that seems to suggest to me that I would have to get to a better understanding about the layout files before I could understand it. Here is what I did:
1. Got my current XKB configuration:
xkbcomp :0 output.xkb
2. Editet output.xkb to include the following at the end of the xkb_compatibility section:
//Hoping this makes the ^-key into a Ctrl-Lock key:
interpret TLDE {
action= LockMods(modifiers=Control);
3. Then I recompiled the configuration back into the running X server:
$ xkbcomp out.xkb :0
Warning: Compat map for group 2 redefined
Using new definition
Warning: Compat map for group 3 redefined
Using new definition
Warning: Compat map for group 4 redefined
Using new definition
Error: Couldn't lookup keysym
Symbol interpretation ignored
Warning: No symbols defined for <AB11> (keycode 97)
Warning: No symbols defined for <JPCM> (keycode 103)
Warning: No symbols defined for <I120> (keycode 120)
Warning: No symbols defined for <AE13> (keycode 132)
Warning: No symbols defined for <I149> (keycode 149)
Warning: No symbols defined for <I154> (keycode 154)
Warning: No symbols defined for <I168> (keycode 168)
Warning: No symbols defined for <I178> (keycode 178)
Warning: No symbols defined for <I183> (keycode 183)
Warning: No symbols defined for <I184> (keycode 184)
Warning: No symbols defined for <FK19> (keycode 197)
Warning: No symbols defined for <FK24> (keycode 202)
Warning: No symbols defined for <I217> (keycode 217)
Warning: No symbols defined for <I219> (keycode 219)
Warning: No symbols defined for <I221> (keycode 221)
Warning: No symbols defined for <I222> (keycode 222)
Warning: No symbols defined for <I230> (keycode 230)
Warning: No symbols defined for <I247> (keycode 247)
Warning: No symbols defined for <I248> (keycode 248)
Warning: No symbols defined for <I249> (keycode 249)
Warning: No symbols defined for <I250> (keycode 250)
Warning: No symbols defined for <I251> (keycode 251)
Warning: No symbols defined for <I252> (keycode 252)
Warning: No symbols defined for <I253> (keycode 253)
The "Error" part is where I am currently stuck. It tells me that my changes were ignored (I no that it's about them because it goes away when I comment them out), but I don't yet understand why.

How to make a checkbox hide and show div between two different pages

Hi
I am developing a mobile site application.
Currently I need to make a checkbox effect.
Here is how I want the checkbox to work for me..
I want users to click on the checkbox, for an option on the editor as well as its content on the live mobile to hide.
These are two different files which contains the user interface.(the live mobile file and the editor file)
Now how can I make it possible to make both options hide or show at the same time after a user clicks on the
checkbox to show or hide.
Is it possible for a checkbox created on a different file affects an external file to hide a div within that file?
If so kindly advice me on this.
Thanks in advance

There are several tutorials out there for dissolving a layer, turning text to sand, and similar things. Use any/all of those and then time remap that composition to make the particles form into your word.

How to make an extruded column twist like a barber pole????

I'm new to Illustrator (and using Windows CS3), and I've been getting properly acquainted with the filters and effects mostly through trial and error. Nonetheless, I need to make a rectangular bar with a pronounced twist - like a barber pole. I started with a rectangle and extruded it into a rectangular bar, then tried to apply warp effects, envelope distortions etc. to try to achieve the result I want. "Twist" seems to make the bar look more like a snake slithering than the twist I need. I feel I must be overlooking something, but I can't seem to find the information I need in the Help functions. Would some experienced user please guide my fingers? Thanks!

does it need to look 3 dimentional or just to have that "barber stripe" look to a flat rectangle?

How to make a original frame same with Comment List and Attachment?

How can I make original frame looking like Comment List?
I'm using Windows XP and Adobe Acrobat 9 Pro and Acrobat 9 SDK.
I want to make a new plug-in that use a new frame.
The new frame is looking like Comment List and Attachment.
I want to show my original list and input form to the frame.
It is close to Comment List frame, but I want to show original list.
Additionally, I want to add new button upper of Comments Button on Navigation Button Panel.
Can I have any help?

There is no support in the SDK for adding your own panels.
There is no support for modifying the existing panels.

How to make Cmd-H hide extras like in AI and PS

Similar Messages

Maybe you are looking for