How to make curved lines in image more smooth and clear

How do i make this clear its and image, i want to make the lines really clear and smooth

Quick and dirty:
Use Gaussian blur to soften the edges, (I used a value of 2).  The use levels, and drag the black and white sliders towards thge center.
Much better to create from scratch using the rough graphic as a template.  If it is a one off, then just stroke a path for the circular outlines, and use a layer mask for the break in the inner circle.
For the curved text, the simplest way is to use the type tool, and then the Create warped text tool from the Options bar, but I doubt you'd get a tight enough curve, so you'll need to use Type on a path.  The easiest way to do that in this case would be to drag out a circular selection with the Marquee tool using the Shift and Alt/Opt keys, and then use the Make work path from selection icon at the bottom of the Paths panel.  Hover the Type cursor over the path and type your text.  If you use Center justified and start at the top, to keep it symetrical, but I just get it close, and fix it with Free Transform.  The rest is straight forward.  I used Areil bold for curved text, and Times New Roman bold for the center text. Use a custom shape for the Tick.  If the tick is not quite to your liking, use the Direct selection tool (a) to drag the points to a better shape.
If you want to use this in a layout program like InDesign, save the layered document as an EPS file, which will be (mostly) vectored and scaleable in InDesign.  You'd need to use Shape layers for the two circles to make it fully vectored.

Similar Messages

  • How Do I make curved lines with the pen tool in after effects CS6

    Hello, so I have been following this video http://www.youtube.com/watch?v=vKzB-CFT0MI on how to make 2d intros in after effects and at the 2:20 mark he shows how he uses the pen tool to make curved lines around the elipse. I tried to do the samething myself, and couldent make the curved lines. I looked it up online and there were tutorials on how to make curved lines but they did not work the same way, and I could not make curves like he did.So if any of you know how to do curved lines like in the video, your help will be appreciated.
    Thanks !

    This is basic stuff and it's basically the same way Illustrator or Photoshop works with bezier paths. You'll find a lot of helpful information if you just type masking or mask in the Search After Effects Help field at the top right corner of the app.
    Adobe - Search: masking
    Directly from the Help Files: After Effects Help | Creating shapes and masks
    Mylenium.. sorry you thought it was an awful tutorial. I made it in under a minute just to show this member the very basic task of creating a mask with the pen tool and animating the shape. I'll try and up the quality of my quick replies to simple operations.

  • How to make new line in JButton.setText()?

    how to make new line in JButton.setText()?
    I want to set the text of jbutton in tow line ,as follows
    | jbutton-line1 |
    | xxxxxxx-line2 |
    i konw i can jbtton.settext("<html>line1<br>line2</html>");
    but i find it's ugly using html,
    is there anyother way to create new line in JButton's Text

    As for the above comment....
    I thought the question was well purposed. Using HTML was not acceptable in this instance, which was made clear, so why critisize his comments? "Using HTML" is a poor solution, it does NOT work in many instances due to browser, OS variations. Usually the "common answer" is never a COMPLETE answer.
    Possible Solution:
    Use JLabels to render the text on the button.
    import javax.swing.*;
    import java.awt.*;
    public class ButtonMaker {
    public static void makeButton(JButton jb, String[] titleList) {
    jb.setLayout(new FlowLayout());
    for (int i = 0; i < titleList.length; i++) {
    JLabel tmpLabel = new JLabel(titleList);
    tmpLabel.setForeground(Color.black);
    jb.add(tmpLabel);
    public static void clearButton(JButton jb) {
    Component[] cList = jb.getComponents();
    for (int i = 0; i < cList.length; i++) {
    if (cList[i] instanceof JLabel)
    jb.remove(cList[i]);
    Known Limitations:
    1. Flowlayout does not work well with single line text buttons... perhaps another layout manager may work better for various buttonsizes-linenumber combos.
    2. Mac OSX : The default UI for Mac OS X (and above it seems), is to have rounded edged buttons. These rounded edges are destoryed when using JLabels, leaving a square, blocky button in its place.
    POSSIBLE SOLUTION:
    (this is ugly and time consuming)
    - create images of the button with text on them.

  • How to make a Colorful Gif Image for Holi

    How to make a colorful Gif Image for Happy Holi 2014

    Okay, I know this doesn't answer your question, but don't get me wrong. A logo is meant to be the way it was designed - upright, no flipping/ swiveling animation. Why exactly do you want to let your logo turn around?
    If its to grab attention, why dont you consider animating the area on which your logo sits (header)? Or maybe add nice transitive slideshows on your main content area to add more interactivity?

  • Firefox open images in a new tab upon clicking the link,how to make firefox to save images in the folder upon clicking the link

    firefox open images in a new tab upon clicking the link,how to make firefox to save images in the folder upon clicking the link.

    You can right-click the image and use "Save Image As" to save that image.

  • How to delete the line between the last point and first point?

    How to delete the line between the last point and first point? 
    I want to draw a curve many times, from first point to the end point. and redraw from first point to the end point.But I hope update point by point. but between the end point and the first point,  there is a line. How to delete the line?
    the code is:
    CNiReal64Vector plotData(50);
    m_graph.ChartLength = 50;
    //m_graph.ClearData();
    for (int j = 0; j < 2; j++)
           for (int i=0; i<50; i++)
                   plotData[i] = ((double)rand()/(double)RAND_MAX)*6 + 4;
                   m_graph.GetPlots().Item("Plot-1").ChartXY(i, plotData[i]);
                   Sleep(100);
    Attachments:
    20150605142608.png ‏31 KB

    Hi Kumar,
    I think you can just delete it in the sales order directly, if you are using make-to-order scenario, then there will be special stock left for the sales order as the production has been goods receipt, you need to use MM transaction move the stock to unrestricted use stock. If you are using make-to-stock scenario, there should be no further problem. If you are using assembly order, please try to reject the sales order item to see if it could fullfill your requirement.
    Regards,
    Rachel

  • How to make a silhouette from a portrait (photo) and-

    How do I make a silhouette from a portrait?
    And how do I make the background transparent?

    Do you mean that I send you the portrait?
    Chabæna
    26 apr 2014 kl. 12:31 skrev c.pfaffenbichler <[email protected]>:
    Re: How to make a silhouette from a portrait (photo) and…
    created by c.pfaffenbichler in Photoshop General Discussion - View the full discussion
    How do I make a silhouette from a portrait?
    Ah, but wouldn’t it be ever so much easier to explain if you actually provided (a lores of) the image in question?
    And how do I make the background transparent?
    Preferably with a Layer Mask and then saving in the appropriate file format (psd or png24 for example support transparency).
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6332417#6332417
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6332417#6332417
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6332417#6332417. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop General Discussion at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • How to make a PWM period of 20 ms and a pulse duration 0,8-2,0 ms

    Hi
    How to make a PWM period of 20 ms and a pulse duration 0,8-2,0 ms. deskret pulse length 0.01 ms. for MCB2300. Are there examples of such implementation?
    thanks

    Sergiv,
    I see you as having two options (if you want finer resolution):
    1) Lower the period of the PWM (such that the percentage values would be of finer resolution with regards to the overall PWM period).
    2) Alter the duty cycle of the PWM with an Inline C node.
    From what I understand, LabVIEW simply calls into the PWM driver distributed by Keil (for the MCB2300).  You can call into the PWM driver directly and/or change register values on the chip if you want in order to do whatever you want.  Both would require you to look through/program in C code.
    Kevin S.
    Applications Engineer
    National Instruments

  • How to make an openfiledialog? (browse a file and put it in a parameter)

    How to make an openfiledialog? (browse a file and put it in a parameter)
    Best Regards

    hi,
    check the code  below:
    FORM sub_gui_download.
    * Define local variables
      DATA:
        lo_fullpath       TYPE string,
        lo_filename       TYPE string,
        lo_path           TYPE string,
        lo_user_action    TYPE i,
        lo_encoding       TYPE abap_encoding.
    * Define local constants
      CONSTANTS:
        lc_encoding(1) TYPE c VALUE 'X',
        lc_directory TYPE string VALUE 'D:',
        lc_filetype TYPE char10 VALUE 'DAT',
        lc_separator TYPE char01 VALUE 'X',
        lc_blank TYPE char01 VALUE ''.
    * Call method to create dynamic save_path and save_format
      CALL METHOD cl_gui_frontend_services=>file_save_dialog
        EXPORTING
          with_encoding        = lc_encoding
          initial_directory    = lc_directory
        CHANGING
          filename             = lo_filename
          path                 = lo_path
          fullpath             = lo_fullpath
          user_action          = lo_user_action
          file_encoding        = lo_encoding
        EXCEPTIONS
          cntl_error           = 1
          error_no_gui         = 2
          not_supported_by_gui = 3
          OTHERS               = 4.
      IF sy-subrc <> 0.
        EXIT.
      ENDIF.
    * Check user_action
      IF lo_user_action <> cl_gui_frontend_services=>action_ok.
        EXIT.
      ELSE.
    *   If user_action equals to action_ok, call function module to download datas
    *   using download table i_dwn_tab
        CALL FUNCTION 'GUI_DOWNLOAD'
          EXPORTING
            filename                = lo_fullpath
            filetype                = lc_filetype
            write_field_separator   = lc_separator
            trunc_trailing_blanks   = lc_blank
          TABLES
            data_tab                = i_dwn_tab
          EXCEPTIONS
            file_write_error        = 1
            no_batch                = 2
            gui_refuse_filetransfer = 3
            invalid_type            = 4
            no_authority            = 5
            unknown_error           = 6
            header_not_allowed      = 7
            separator_not_allowed   = 8
            filesize_not_allowed    = 9
            header_too_long         = 10
            dp_error_create         = 11
            dp_error_send           = 12
            dp_error_write          = 13
            unknown_dp_error        = 14
            access_denied           = 15
            dp_out_of_memory        = 16
            disk_full               = 17
            dp_timeout              = 18
            file_not_found          = 19
            dataprovider_exception  = 20
            control_flush_error     = 21
            OTHERS                  = 22.
        IF sy-subrc <> 0.
          MESSAGE i007.
        ENDIF.
      ENDIF.
    ENDFORM.    

  • How to make an effect of a glass breaking and fall into pieces?

    How to make an effect of a glass breaking and fall into pieces?
    I want to make an effect where there's a guy hitting a wall and the wall falls into pieces...Please help!! I can make the guy in green screen but its the effect of the wall breaking that I want to know how to make in motion. Hope anyone can help

    Search is your friend:
    http://discussions.apple.com/search.jspa?threadID=&q=shattering&objID=f656&dateR ange=all&numResults=30
    Patrick

  • How to make the mobile application work with firewall and anti-virus ON

    Hi,
    I keep on receiving internal processing error when i try to login sap mobile solution 1.3.0 on my ipad and i was provided a solution, that is to turn off my firewall and antivirus. I works by turn off both of it but i cant possible turn of the firewall and antivirus on the server.
    Can anyone guide me how to make the mobile application work with firewall and anti-virus ON
    Thank you

    Dear Rajesh,
    Create a policy in your fire wall to allow the port to send and receive data.
    I believe the port for the mobile should be port 8080 and 8443.
    And your license server port 30000 and 30001
    nd.Q

  • How to make editing cell to show up caret and taking keyboard event

    Hello everyone:
    I have the following problem with table editing.
    1. using mouse clicking, the editing cell will have cursor and taking keyboard event.(no problem with it)
    2. just type in data, it will show up in the selected cell, but the editing cell do not have cursor visible and also do not fire the keyboard event.
    I have problem with this one. So how to make editing cell to have caret visible and taking keyboard event.
    Thank you very much!
    --tony                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    Hi,
    you should subclass JTable and overwrite two methods.
    1. protected boolean processKeyBinding(javax.swing.KeyStroke ks,
    java.awt.event.KeyEvent e,
    int condition,
    boolean pressed)
    to store the current keyboard event,
    2.public boolean editCellAt(int row,int column,java.util.EventObject e)
    to fix the problem with isCellEditable and curret position and direct the event into proper place.

  • How to make a Integration between jdev10.1.2 and vss

    How to make a Integration between jdev10.1.2 and vss to enable a version control.the help document tell to make a extension file, but how to do? thank you!

    http://www.oracle.com/technology/products/jdev/101/htdocs/partners/addins/905resources.html
    There is a link there to:
    Creating a Version Control System Extension
    A project with sample code to get you started

  • The Multi-touch surface of the Magic Mouse could be more smoother and the sensor could be more sensitive on different kinda surfaces.

    The Multi-touch surface of the Magic Mouse could be more smoother and the sensor could be more sensitive on different kinda surfaces.

    ) I have a ProLink bluetooth mouse with me labelled 2.4GHz wireless mouse with this USB bluetooth stub that is inserted into the USB port in order for the mouse to connect to my iMac. (i'm not a techincal guy)
    Is this mouse connected at the same time as the Magic Mouse? If so, unplug it.
    Try resetting the PRAM: http://support.apple.com/kb/PH14222
    Try putting it on a mouse pad.
    Barry

  • How to make a line with arrow curve around a circle?

    I've got CS6 and Windows 7. Trying to make a line with an arrow on one end curve around a circle. Actually want it to have a 3D look like it was curving around the back side of a globe. How do you do this? Thanks.

    Perhaps you mean something more like this
    similar technique you create the arrow as a straight stroke path with an arrowhead and make it a symbol
    You then make it a symbol
    you than make a vertical rectangle and use the 3D Revolve Effect to make a cylinder
    then you go to map art
    then you choose in the map art to make the geomtery invisible
    then you ma the arrow symbol and adjust the placement and then adjust the rotation of the cylinder to your likeing.
    If you need a video to follow I'll do one later.

Maybe you are looking for