How to make data available in SAP PI from SAP BI

Hello All,
I have certain data in a INFOCUBE ie in SAP BI and as per my requirement i want to push that data to SAP PI
Can I get to know the process to make data available to SAP PI from SAP BI..?.
It would really helpful if i get the step by step procedure for the same.
Thanks in Advance.
Regards,
Foram

Hi,
SAP PI is the interface to move file from one system to other system like BI, R/3 etc.,
Create open hub on top of Info cube based on your requirement. Create logical path and assign physical path to logical path using T-code FILE. Provide that logical path in Open hub destination where the file will be placed. Then SAP PI team will pick that file and process that file as per requirement.
Thanks & Regards,
Chandra Sekhar.

Similar Messages

How to make material availability check work during Work Order creation

Hi Experts,
Kindly advice about these matters:
1. How to make material availability check work during Work Order creation?
My requirement is Work Order can not be created when it has missing parts. I have set the config to '3' can not created when is has missing parts, but it still does not work.
I have implemented SAP Notes 1148139 on my system (SAP ECC 6 Ehp 5) also, but still does not have any effect.
I must not set the config Res./Purch Doc creation to 'immediately', because it does not fit to my user requirement. Is there anyone knows how to solve this requirement?
2. How to make information message/ Availability check screen appear when sparepart is missing, without clicking Availability Check button? for example: appear when clicking Save button.
Thank you
-amoonra-

Hi Maheswaran,
I have implement the prerequisite notes. (Notes 790219 and 1034962). Do you know why it is still does not work?
Thanks
-amoonra-

How to setup Data guard for SAP database?

Can someone please tell me how to setup data guard for SAP databases?
Thanks,
Abhi

Hi Abhi,
have a look at OSS 105047 - Support for Oracle functions in the SAP environment you find this under
14
Oracle Data Guard
You can use "Physical Standby".
You cannot use "Logical Standby".
You are allowed to use Fast Start Failover (FSFO) but SAP Support is not provided.
You can use Data Guard Broker.
You can use Maximum Performance Mode, Maximum Availability Mode and Maximum Protection Mode.
In the case of Maximum Availability and Maximum Protection, you must pay particular attention to a fast network connection in order to avoid performance problems.
Maximum Protection causes the primary database to terminate if problems occur in the standby database.
And here you find on Oracle white paper from 2010 http://www.oracle.com/us/solutions/sap/wp-ora4sap-dataguard11g-303811.pdf
Perhaps some SAP user have answers for you http://scn.sap.com/community/oracle/content?query=guard
regards
Kay

How to make data sorted by default by key figure?

hi experts,
how to make data sorted by default by key figure?

Hi ,
Try to make the selections for the filter of the query..
Check this link ..
http://help.sap.com/saphelp_nw70/helpdata/en/f1/0a5625e09411d2acb90000e829fbfe/frameset.htm
Regards,
Shikha

How to do Data Masking in SAP?

Hello All,
How to do Data masking in SAP, My Client has a production data, so we have to create a development environment with this production data but the data should be masked/changed with some dummy data, and it should work as test data for developments in dev environment.
Please tell me the Process? Approach? and how to do it in SAP?
Regards,
Srikanth

Hi,
this kind of tools already exist in SAP, if you client have some money to spend : TDMS
regards
Fred

How to make iBooks available in iBookstore for Sri Lanka and India?

Does anyone know how to make iBooks available for purchase in iBookstore for Sri Lanka and India? I have tried going through iTunes Connect to add regions, but it doesn't give me the option to add any more. Thanks

ali.basheer.ahamed wrote:
Can I know How to add to the Indian store please. I have been trying the same - unable to add.
Consult this list to see whether paid books are available in those countries:
http://support.apple.com/kb/TS3599
If not, you have to use another store, like Kindle, Nook, Kobo, Googlebooks, or Sony.

How to convert date format into sap standard format?

Hi All,
In SAPUI5 screen i have one simple form in form i have date field which is format (MM/DD/YYYY). but i am getting POST error while inserting the data in to sap table.
I want convert date format in sap format (YYYY/MM/DD).
One more issue, when i am fetching the data from sap table,but the date display with time and time zone.
eg. Sat Aug 02 2014 05:30:00 GMT+0530 (India Standard Time)
I want to display only date.
Thanks,
Prashant.

Now i am using <DatePicker id="Emp_fsdate" displayFormat="yyyy-MM-dd"/>
I checked in console, but date is display like mm/dd/yy
In my controller.js file i have written code
OData.request
           requestUri: "http:sap/opu/odata/sap/ZSERVICE_FINAL_SRV/es_sodata",
           method: "GET",
           headers:
           "X-Requested-With": "XMLHttpRequest",
           "Content-Type": "application/atom+xml",
           "DataServiceVersion": "2.0",
           "X-CSRF-Token":"Fetch"
       function (data, response){
        var header_xcsrf_token = response.headers['x-csrf-token'];
                   OData.request
                        requestUri:
                         "http://sap/opu/odata/sap/ZSERVICE_FINAL_SRV/es_sodata",
                        method: "POST",
                        headers:
                      "X-Requested-With": "XMLHttpRequest",
                        "Content-Type": "application/atom+xml",
                        "DataServiceVersion": "2.0",
                        "Accept": "application/atom+xml,application/atomsvc+xml,application/xml",
                        "X-CSRF-Token": header_xcsrf_token
                        data:
                               Empid:Emp_id,
                               Empname:Emp_name,
                               Start_Date:Emp_sdate,
//                              End_Date:Emp_edate,
                               Status:Emp_status,
                               City:Emp_city,
                               Location:Emp_location,
and in my CREATE_ENTITY method
method ES_SODATA_CREATE_ENTITY.
     DATA: ls_request_input_data TYPE zcl_zservice_final_mpc=>ts_et_sodata,
         ls_userinfo TYPE zsodata.
   DATA ls_temp TYPE sy-datum.
* Read Request Data
   io_data_provider->read_entry_data( IMPORTING es_data = ls_request_input_data ).
* Fill workarea to be inserted
   ls_userinfo-Empid   = ls_request_input_data-Empid.
   ls_userinfo-Empname   = ls_request_input_data-Empname.
   ls_userinfo-Start_Date   = ls_request_input_data-Start_Date.
   ls_userinfo-End_Date   = ls_request_input_data-End_Date.
   ls_userinfo-Status   = ls_request_input_data-Status.
   ls_userinfo-City   = ls_request_input_data-City.
   ls_userinfo-Location   = ls_request_input_data-Location.
* Insert Data in table ZUSERINFO
   INSERT zsodata FROM ls_userinfo.
   IF sy-subrc = 0.
     er_entity = ls_request_input_data. "Fill Exporting parameter ER_ENTITY
   ENDIF.
   endmethod.
But still i am getting an error
POST http://sap/opu/odata/sap/ZSERVICE_FINAL_SRV/es_sodata 500 (Internal Server Error)
I am able to insert all field except date field. How to insert date field in sap table.

How to make date specific in sourcing personalized pages

How to make date specific in sourcing personalized pages

1. Extend the controller NegCreationHeaderPageCO
2. have code something like below.
OAMessageRadioGroupBean Quotestyle=
(OAMessageRadioGroupBean)webBean.findChildRecursive("BidVisibilityCode");
Quotestyle.setreadonly("yes";
3. Attach the extended controller through forms personalization.
Please try and let me know if this works fine.

How to make data flow from one application to other in BPEL.

Hi All,
I am designing work-flow of my application through BPEL(JDeveloper), I am making different BPEL projects for different functions, like sales manager got the order from sales person and sales manager either approve it or reject it, if he approve it it goes to Production manager and he ships the goods, now I want to keep sales person, sales manger,production manager in seperate BPEL files and want to get the output of sales person to sales manager and sales manager to production manager please help me in dong this.
I was trying to make partner link in Sales manager of sales person and getting the input from there. I dont know this is right even or not, if it is right I dont know how to make data flow from one application to other.
Experience people please guide.
Sales Person -----> Sales Manager ----> Production Manager
Thanks
Yatan

Yes you can do this.
If you each integration point to be in different process, you have to create three BPEL process.
1. Create a Async BPEL process 'A' which will be initiated when sales person creates the order.
2. From BPEL process 'A' call a ASync BPEL process 'B' which has the approval flow. Depending on the input from process 'A' the sales manager will review the order in workflow and approve or reject and send the result back to process 'A'.
3. Based on the result from workflow, invoke the Sync BPEL process 'C', where you can implement the shipping logic.
-Ramana.

How to make barcode interface with SAP B1

Hi all,
I need an interface code to make an interface between barcode printer with SAP B1. i got a scenario from the barcode people. that they are using EPL coding only for Barcode printer print, there they need to run this EPL code in Dos mode, for that .bat file is needed. hope you might got some idea that how a barcode printer is working. now how to make an interface of SAP B1 with Barcode printer.
how to generate a code which will put the bar code and price with the AP invoice of the item in EPL code which is in a text format. so that by .bat format txt file should be run in dos mode.
if you have any other process to run the EPL code, kindly send me the details as soon as possible....its very urgent.
regards
sandip

Sandip,
I think what you may be more concerned about, rather than the printer "language" (ZPL, EPL, etc...) is the symbology that you require for barcodes. Like 3of9, code 128, etc.
The standard B1 PLD will input a barcode image for whatever field you specify, but only in a couple of symbologies. The Advanced Layout Designer apparently supports a lot more. I have read that it may be requested from you partner, or if on 2007, it is part of the standard install.
B1 should pass the bar code to the printer, where the printer's language will decode and print it out. Bypass the .bat file, bypass DOS, let B1 do it.
Is your Epson printer supported under Windows?

How to make programs available to all users

How to make programs available to all users

By default, all Applications are installed in /Applications. Those are available to all users. If you choose to install in your home Applications folder, they are only available to that user.
You can also control app usage with Parental Controls. If that is on, that my be why some cannot use certain apps.

How to make a communication of two VIs from difference computers throught VI server?

how to make a communication of two VIs from difference computers throught VI server?
I have built the program which is attached at below. But it doesn't work. Can any one help me?
Attachments:
panel5.vi ‏82 KB

Hi Barry,
What do you mean "it doesn't work"? What kind of errors are you seeing? Also, you only specified the file name (data.vi) when opening a VI reference. Try specifying the whole path to the VI. Also, you might want to make sure you are able to ping your other computer from the start (to see if this is a LabVIEW issue or a network issue).
Hope this helps,
Travis H.
LabVIEW R&D
National Instruments

How to process data in the past based from data in the present

hello guys,
i have a problem in my labview programs. how to process data in the past based from data in the present ?
i have a formula self-organizing maps
this formula is looking for D1, D1 is neuron index that will be searched for the smallest value.and the result are D1=2 ,D2=5, D3=17 from calculating with formula .it means the smallest value is 2, "2" from weight [2 2] in file attached.
and then it will be in other formula
it mean [2 2] + 0.5 ( [1 1]-[2 2] ) = [1.5 1.5]
and the weight will be [1.5 2 2 ] in matrix
1.5 3 5
I would appreciate any input/help on solving this
thanks
Attachments:
dika.vi ‏16 KB
weight.txt ‏1 KB
data .txt ‏1 KB

Hi Ronny Hanks,
Moving your records from internal table into the database table depends upon various scenarios :-
1. If you use INSERT statement.
INSERT <database_table> FROM TABLE <internal_table>.
But in this case, you need to make sure that you don't have any duplicate entries in your internal table that violates data entry into database table, else you will get a dump.
INSERT <database_table> FROM TABLE <internal_table> ACCEPTING DUPLICATE KEYS.
In this case, you are forcefully inserting duplicate records into your database table which may lead to data redundancy in your database table.
2. If you use UPDATE statement.
UPDATE <database_table> FROM TABLE <internal_table>.
This will update the existing records in your database table from the internal table.
3. If you use MODIFY statement.
MODIFY <database_table> FROM TABLE <internal_table>.
This statement works both in combination of INSERT & UPDATE statements.
Existing records (in database table) will be eventually updated/modified and new records (not in database table currently) will be successfully inserted into the database table.
Hope this solves your problem.
Thanks & Regards.
Tarun Gambhir.

How to Select data using same column name from 3 remote database

Hi,
Can anyone help me on how to get data with same column names from 3 remote database and a single alias.
Ex.
SELECT *
a.name, b.status, SUM(b.qty) qantity, MAX(b.date) date_as_of
FROM
*((table1@remotedatabase1, table1@remotedatabase2, table1@remotedatabase3)a,*
*(table1@remotedatabase1, table1@remotedatabase2, table1@remotedatabase3)b)*
WHERE b.dept = 'finance'
AND a.position = 'admin'
AND a.latest = 'Y' AND (b.status <> 'TRM') AND b.qty > 0;
GROUP BY a.name, b.status ;
NOTE: the bold statements is just an example of what I want to do but I always gets an error beacause of ambiguous columns.
Thanks in advnce. :)
Edited by: user12994685 on Jan 4, 2011 9:42 PM

user12994685 wrote:
Can anyone help me on how to get data with same column names from 3 remote database and a single alias.Invalid. This does not make sense and breaks all scope resolution rules. And whether this is in a single database, or uses tables across databases, is irrelevant.
Each object must be uniquely identified. So you cannot do this:
select * from (table1@remotedatabase1, table1@remotedatabase2, table1@remotedatabase3) a3 objects cannot share the same alias. Example:
SQL> select * from (dual, dual) d;
select * from (dual, dual) d
ERROR at line 1:
ORA-00907: missing right parenthesisYou need to combine the objects - using a join or union or similar. So it will need to be done as follows:
SQL> select * from (select * from dual d1, dual d2) d;
select * from (select * from dual d1, dual d2) d
ERROR at line 1:
ORA-00918: column ambiguously definedHowever, we need to have unique column names in a SQL projection - so the join of the tables need to project a unique set of columns. Thus:
SQL> select * from (select d1.dummy as dummy1, d2.dummy as dummy2 from dual d1, dual d2) d;
DUM DUM
X X
SQL> I suggest that you look closely at what scope is and how it applies in the SQL language - and ignore whether the objects referenced are local or remote as it has no impact to fundamentals of scope resolution.

How to make a redirect without auto-redirect from the portlet "edit" mode?

How to make a redirect without auto-redirect from the portlet "edit" mode?
I use some sofisticated customizing with server-side validation of the form data. I want to redirect to the page of the portlet "show" mode and to the "edit" mode depending on the validation results. How can I do it?

Heay.....this worked for me.
I am able to change the mode programatically from edit to show.
HttpPortletRendererUtil.handleEditAction(portletRenderRequest,"OK");
I removed Apply , OK and Cancel buttons and applied my own Submit and Back button in Personalize mode and then change the mode to show on click of Back button using the above mentioned statement.
Thanks
~Neeraj Sidhaye
Try_Catch_Finally @ Y !
ExtremePortal @ Gmail　Ｄｏｔ　Ｃｏｍ

How to make data available in SAP PI from SAP BI

Similar Messages

Maybe you are looking for