How to make default event on Droid calendar an "appointment"?

Does anyone know how to make the default new event on the Droid calendar an "appointment" instead of a "meeting?"  When I enter a new event on the Droid calendar it assumes a meeting, asking for attendees and for attendance confirmation.  That's also how it syncs to my Google calendar, as a "meeting."  I only want to create simple appointments on the phone calendar. Right now I have to go up to the Google calendar, delete the event as a "meeting" and re-enter it as an appointment, at which point it flows down to the phone correctly.  Help!

Thank you for your inquiry! I can definitely understand the need for being able to increase the font size in your email. At this time, there is no option in Android phones to increase the font size for email. This issue has been lifted up to Google in the past, but at this time there is no information on whether this will be available in the future. There are different mail applications in the Market that may have the ability to increase the font size.

Similar Messages

  • With Yosemite I can't figure out how to make a event in a calendar "on my mac"

    When I used
    create calendar with name myCal
    in pre Yosemite it would make the calendar "on my mac" which was fine because when you got a list on all calendars it would be there.
    Now with Yosemite it still will only make a new cal on my mac not iCloud but when you get a list of all cals its not listed, just the ones on iCloud are. Since I can't have it make a new calendar in iCloud and applescript doesn't see the calendars on my mac, I am lost on how to add a new event in the calendar I just created. I can get an event in an existing iCloud calendar but it takes a long time (in minutes not seconds).

    Hello,
    Just tried this. works fine if iCloud is switched off but when iCloud switched on then the Calendars 'On my mac" are not listed.
    Not a reply to your question but do you know either how to create a named Calendar in iCloud or to rename an existing calendar in iCloud?
    Thanks,
    John H

  • How to Make All Events in One Calendar Have Alerts Automatically

    I am a college student majoring in engineering, which means I always have lots of homework due at various times. So to help me keep better track of when my assignments are due, I have started putting the due dates into my calendar. The only problem with that is every time I enter in a new event I have to set up an alert for that particular event. This is extremely annoying having to do this for each assignment. What I am wondering is there a way to make it so that every event in my "Homework" Calendar sends me an alert two hours before the event starts? I know you can make it so that all events send you an alert, but I just want this one calendar to automatically send alerts for it's events. Any help is greatly appreciated!

    Thread is closed.
    'Twas simple, but problem was my lack of knowledge how winhelp is built.
    I needed to Update (synchronizae) document after I linked it and built proper topics and link them with proper document section.

  • HT4759 How can make the events listed in my chalenda become automatically a reminder in the reminder?:

    How can make the events listed in my chalenda become automatically a reminder in the reminder?:

    Welcome to the Apple community.
    Calendar and reminders are two different and separate apps, you cannot transfer information between the two of them.

  • How to make default Currency  depending upon plant in table entries

    Hi,,
    How to make default Currency  depending upon plant in table entries?
    I am making entries in SM30.
    I have the following fields in z table.
    plaant , material,month.year,PFvalue,Currency.
    Can  some body throw light for this issue,please?\
    I am familiar  with modification-events.
    With Regards,
    Jaheer

    Hi,
      In PBO, within a LOOP, table control is filled via a Structure/Work Area.
      In that module, code as follows,
    LOOP AT SCREEN.
        IF WA-FIELD1 = C_1 AND SCREEN-GROUP1 = C_G1.
          SCREEN-INPUT = 0.
          MODIFY SCREEN.
        ENDIF.
    ENDLOOP.
      Here, WA is a strcture & FIELD1 is its field, like that...
      I already did this.
      Check it out & Reply.
    Yours,
    R.Nagarajan
    We can

  • How to add an event to my calendar?

    How to add an event to my calendar?  I tried several times and the events are not there.

        We appreciate you trying, Deborah1964. We'll get your events added! From your home screen, tap Calendar then tap the plus sign in the upper right corner to enter a new event. After you've made sure to selecy the correct dates, times, calendar (email address), etc then tap Add at the top right corner to save the event. Please keep us posted if you run into any error messages or what happens after you save the event if you continue to have trouble.
    JenniferH_VZW
    Follow us on Twitter www.twitter.com/vzwsupport

  • How to make default values in selection field?

    hi,
          i have selection field date , using data element 'QENTST' using following code in view INIT Method. i get the input selection field when i test application.
    DATA: LT_RANGE_TABLE TYPE REF TO DATA.
    CALL METHOD WD_THIS->M_HANDLER->CREATE_RANGE_TABLE
      EXPORTING
        I_TYPENAME                     =     'QENTST'
      RECEIVING
        RT_RANGE_TABLE           =     LT_RANGE_TABLE.
    CALL METHOD WD_THIS->M_HANDLER->ADD_SELECTION_FIELD
      EXPORTING
        I_ID                                     = 'QENTST'
        IT_RESULT                         = LT_RANGE_TABLE
        I_OBLIGATORY                 = ABAP_TRUE.
    What i need now , to make default value in this selection field( low = sy-datum and high = sy-datum + 10 ) . I have checked , i found one method called... SET_RANGE_TABLE_OF_SEL_FIELD. Bt i m not able to understand how to assign values to input table parameter in this method?
    Thanks In Advance.
    Saurin Shah

    Hi,
    Refer this Article by Thomas on how to make default values in Select Options:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60474842-91ca-2b10-3390-d2fd30f335fd
    I hope it would solve your problem.

  • How to make Default ALV layout

    Hi,
    I want to make 'STANDARD view' as a default ALV Layout...If anybody execute my ALV Report STARD Layout variant should display by default. Other variant layouts they can select from drill down..
    I know class and method but i don't know how to write code for this with paremeters..Can anybody help on code please..
    CLASS : CL_SALV_WD_C_TABLE
    METHOD : IF_SALV_WD_COMP_TABLE_PERS~SET_STANDARD_VIEW
    My current ALV CODE
      DATA: l_ref_interfacecontroller TYPE REF TO iwci_salv_wd_table .
      DATA: l_value TYPE REF TO cl_salv_wd_config_table.
      l_ref_interfacecontroller = wd_this->wd_cpifc_alv( ).
      l_value = l_ref_interfacecontroller->get_model( ).
    Thanks.,
    Subba

    Hi sarbjeet singh,
    Thanks for your reply...
    I didn't understand your answer...Already this view gone to production system and every USER created his own view..
    Now how can make default standard view to all users..
    If i keep Standard view as Intial view and release transport to production is it effected to all users and display standard view as initial view?
    Thanks,
    Subba

  • How to make Default the Higher-Level Manager of the employee

    Dear experts,
    how to make Default the Higher-Level Manager of the employee as Further Participant in performance management ?
    Regards,
    TVS

    Hi,
    The delivered BAdI below defaults in both the appraiser and appraisee as part-appraisers//Default Further Participants.
    BAdI Area: Appraisal Enhancements
    BAdI Definition: HRHAP00_DOC_DEF_DO (Appraisal - Default Further Participants)
    App. Enhn.: DEFAULT_ALL_MANAGERS     
    Implementation: HRTMC_DEF_OTHERS
    Implementation short text: Determine All Managers
    Implement this BADI  in SE18/SE19 and  write the desired code in the  BADI methods
    Hope this will help u out.....
    Regards
    Lakhan

  • How to make different events with different colors on calendar, on my new iPad

    how to make events on calendar with different colors ?

    Sergio,
    The color of an event is dictated by the color assinged to the calendar it's on.
    Tap Calendars then tap Edit to either changed the color of an existing calendar or to add a new one.
    Matt

  • How to make an event repeatable in the Calendar? - No such field.

    Normally I would change the Repeat "never" field to weekly or whatever I want. 
    This time however the event suddenly closed while I was changing it to weekly.
    Now when I edit the event in the calendar there is NO repeat field at all. 
    How to bring it back?   Thanks!

    Darn because of a buggy touch screen that triggered right when you finish typing everything...you are have to delete and then retype the entire event? 
    Bummer, was looking for a more elegant solution or perhaps something in the UI (some kind of undo).  I'd expect that from Windows...but not iOS. 
    Oh well tip to remember, always type in notepad first, then copy and paste.  Never type directly into an app.

  • How to make default account assignment category in planned order?

    Scneario Description:
    1. Sales order for a configurable parent item is created in ERP & order BOM is changed & transferred to APO. In APO MRP run takes place for that parent item, which creates a planned order with account assignment category "M" (M:Individual Customer w/o KD-CO.
    2. Now based on the dependant requirement generated for parent item, MRP takes place for one of the child item in ERP & purchase requisition gets created for child item.
    Question:
    1. Can anybody help me how i can make default account assignment as "F" (F:Order) in the planned order of parent item?
    2. PR created for child item also has default account assignment category as "M". we wish to change that to "F".
    Thanks & best regards
    Hemchandra & Sandeep Mandhana

    Hi V. Suresh,
    The account assignment category maintained in the requirement class for parent item is 'M'.
    No account assignment category maintained has been maintained in the requirement class Semi-finished component (this component is sent for subcontracting).
    The business process is as follows:
    1. Create Sales Order for Parent say ME_PARENT.
    2. Order BOM for ME_PARENT is created and subsequently cifed to APO.
    3. PP/DS heuristic is run for ME_PARENT.
    4. MRP for component ME_COMP is run in ERP.
    It can be seen that purchase requistion for ME_COMP has a/c assgn category as 'M'. It seems that the ME_COMP has inherited 'M' from ME_PARENT.
    We would like to have no a/c assgn category for ME_COMP.
    Any pointers?
    Regards,
    Sandeep

  • How do i display events from different calendars side by side and not on top of each other

    I must have something set up wrong on one of my calendars on my macbook pro 10.7. On one of the calendars, the events do not make space for an event from another calendar so I can see both events sidi by side in a week or day view. 
    When I view from the web icloud, it looks right:

    Hi Hotch,
    I have been having the exact same problem, however, I am not seeing your graphic. From your description, though, I can tell we have the same problem. This has only become a problem since migrating everything over to iCloud and since upgrading to Lion.
    Can anyone help us out there?!?!?!?!?
    ~todd

  • How to make default personalization options for users

    Hi all,
    How can I make default personalization options for users, so that those will the default options when the user opens the portal BSP applications. Those will be the standard, at later point of time if they want they can personlalize some other fields, but earlier fields will be the default fields and user cant be able to change them.
    Thanks
    Murthy

    Hi Murthy,
    If you use IMG (crmc_blueprint_c) to customize PCUI appl than you can use the personalization feature. If you select 'Not in List' in the IMG for the field in the fieldgroup structure, than this field by default will not be viewable in the List View and will not be checked as 'Visible' in the Personilzation link. So by not selecting 'Not in List' you are giving that field to be viewable and all other fields are available for users to personalize by default.
    If you have maintained the 'List View' using the CRM Designer, than most likely you would lose the above feature, as SAP Standard code considers the CRM Designer as high level of customization.
    Thanks
    Harsh

  • How to make default value for region based on city?

    Dear Experts,
    When city is selected in TRIP or PR05, how to make the default value of city based on region?
    The standard search help givenfot citydoesnt contain any enhancement point?
    Pls suggest how to resolve this!!!
    Thanks In Advance
    Rgrds,
    Sravan

    Hello Sahil
    Account and CC/PC are 2 different entity types. For PC and CC there is dependency. First you have to load Cost centers and then load PC.
    For CC - load CC master data first. Then load hierarchy file then group file and finally assignment file.
    Follow same process for PC.
    GL you can load independently but you have first load group GL then operational GL and then GL at company code level,
    Kiran

Maybe you are looking for