How to make downtime shorter in BI upgrade project

hi expert,
I am planning upgrade to BI7.0 from BW3.0B.
After upgrade to BI700(ABAP), install AS-JAVA(EP,BI-JAVA)
as addin installation.
In this case downtime is not only for BI upgrade (ABAP) but also
have to be considered install and setting bi-java setting.
It must take over 1 week at least i guess.
What is generall way to complete upgrade BI-ABAP and
BI-JAVA project ??
Regards
MASAKI

Hi,
check this links
Upgrade from 3x to BI 7.0
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2e8e5288-0b01-0010-2ea8-bcd4df5084a7
Post Upgrade Checklist
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/472443f2-0c01-0010-20ab-fbd380d45881
http://www.myitgroup.com/upload/BusinessIntelligence/BW35%20Post%20Install%20steps.doc
Presentation
http://csc-studentweb.lrc.edu/swp/Berg/Articles/PM_2006_upgrade_NW2004s_Bjarne_Berg_v12.ppt
Here are the frontend requirements:
Troubleshoot the SAP NetWeaver 2004s BI Frontend Installation
Hope it helps u...

Similar Messages

How to make a short clip out of the original one ?

Some days ago, I asked a question on editing a clip in this forum. The responder asked me to provide a few seconds of the clip for his examination. But I got stuck. I didn't know how to make a clip of a few seconds out of the original clip and that it had the exact same format and properties as the original clip.
Neither Premier nor After Effect have an ouput option such as "same as original source" .
So, my question is how to make a short clip out of the original one with everything the same properties as the original one.
Thanks in advance.

May be I haven't made myself clear
Sorry, but I think that I am still not following you.
I want to export and render the short clip to a new file which I want to have everything the same as the original clip. Just like I cut off a few seconds off it and that few seconds becomes an independent file.
OK, you have your original source file. It is complete and is also unaltered. If you want a "Copy" of it, just use Windows Explorer, or similar to make that Copy. If you want a separate file of your edited version of that source file (as it appears in the Timeline), use the WAB (Work Area Bar) to include just that edited instance of the source footage, and Export just the WAB. This will give you a separate file with the edits in it.
I still feel that neither is what you want. If you can step me through, maybe with screen-caps, what you have and what you wish to end up with, I can see the operation more clearly.
Good luck,
Hunt

How to make a short name of iweb

Hi.. anyone have an idea to make a short name of iweb when my friends ask about " what's your web name... I cant remember cause it too long " like mind ... http://web.mac.com/jokertgfoto/iWeb/joker/Welcome.html how can I make....http://[email protected] . I need mac to solve this help too. Many thanks

Well, as far as telling people about your iWeb URL, all you have to tell them is the short iWeb URL...
http://web.mac.com/jokertgfoto
This will always lead to your default starting homepage, which is set in the SiteOrganizer in iWeb. So you don't have to specify the rest of the URL as you have typed out....that's an improvement already, isn't it?
But if you like, you can get register for you own domain name at any number of places like GoDaddy or Yahoo or 1&1...there are LOTS of domain registrars. This should cost somewhere in the vicinity of $10 a year. Then once you have your domain name, you can setup a feature of domain names called "Domain Forwarding". This will link your domain name to your iWeb URL so that anyone who types your domain name, like http://www.jokertgfoto.com will get taken directly to http://web.mac.com/jokertgfoto
I hope this answers your question, but feel free to post back if you need any clarification.

How to make word short cut in texting

I can't remember how to make word substitutes .
For example is I type "r" IMessage will automatically put "are"
Help please

Hey kalmatt,
Here is a link for you that will help you add shortcuts to your phone so that you can save keystrokes:
Save keystrokes - iPhone
http://help.apple.com/iphone/7/#/iph6d01d862
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

How to make and build a dinamic web project

hi people, i just downloaded the flex 2 beta 3, and installed
this "separated" of the eclipse application, but my question is ..
how i have to create a new dinamic project, that contains the
Web-Inf folder and Meta-Inf folder..?? off course that i have the
java sdk installed, the eclipse and the flex environment....
can anybody help me with this?? i will really really
apreciate this!!
thanks in advance!!
JP.

quote:
Originally posted by:
ntsiii
Also, you will be using Tomcat and Java on the server to
provide data to your client-side application.
it´s rigth..
quote:
You have several options, including RemoteObject,
Webservices(Axis?), or HTTPService(it is very simple to use JSP to
save and retrieve data and send it to the Flex client)
All this options, in what tool are implemented?
quote:
Post again if you get stuck.
By the way, General Flex questions should be posted in the
General Discussion forum. This one is for Flex Builder questions.
Tracy
yes, i know, i searched the site looking for a tutorial or
something that refer how to related a website and a data in a
database.... in order to make a form to manage the data..
thanks a lot!!!

How to make more storage space to upgrade iPhone 4

Can’t upgrade to IOS 8.0.2 b/c phone says, “This upgrade cannot be installed because it requires at least 4.7 GB of storage. You can make more storage available by deleting items in Usage Settings.” Phone says I only have 1.4 GB available. I’ve only got 1) 2.7 GB of music, 2) 161 MB of photos, and total of 2 GB of other apps. Everything else are Apple apps, such as contacts, safari, mail, etc. I cleaned out most photos.
I’ve made a point of downloading very few apps and keeping all photos on my iMac, but the phone has filled up in only a few months. Seems only way to make any real space available is to have no music, no photos, and no apps. Only that will create 4.8 GB of available space. Is it just a phone then? Is there any other practical option?

You can look in Settings > General > Usage > Storage > Manage Storage. That list will tell you what is taking up the most amount of space. Obvious culprits are photos and video. But games and magazine subscriptions are also very large.
What you delete first depends on what you use your iPhone for. What is your priority? In any case, that list will at least help you see what takes up the most space and decide what should go first.

How to make videos shorter?

Hey guys, I've got a video here that's 2 hours long and there's a 2minute scene I want to take out of it so it doesn't use up so much space. What do I need to do to achieve this?

With QuickTime Player 7 for Mac OS X v10.6.3 or later you can select a section of a movie and cut it out. Then save the remaining movie to a new file to preserve the original.
Move the two lower tab indicators to the start and end of the part you want to cut out and type Command + X or use the Edit ➙ Cut menu.

How to make a DVD 5 from a project?

I have a FCP project just short of 3 hours long and my client has demanded a DVD 5 preview copy with burnt in timecode. Can anyone advise on how I can do this?

You said,"I use a DVD recorder to create BITC copies directly from FCP's Timeline."
I used to make a master on my Sony DVD HD deck and then down convert it onto a DVD recorder, with the time code display on.A bit long winded. I didn't realise you could go from the time line, are you simply playing it back ie pressing the "Space bar"? and if so how do you burn in the time code?
I think I'd rather try and burn a DVD on the computer, I'll give it a go.

How to make small change in old "finished" project

I'm now working in PPCS3. I want to retitle, but no other changes, a project I did 2 years ago in PP2. I have the MPEG2 output of that project, but did not keep the source material and prproj file. I do have the background clip for the title. I could put the old MPEG2 on the timeline of a new project, overlay the new title material at 100 opacity and fade it to the original at its end. This would be easy to do, but would the bulk of the project suffer noticably from rerendering the already compressed MPEG2 material? I could do the title piece as a new project, but can't figure out how to chop off the front-end title seconds from the original MPEG2 to join it up with the new title segment. Are there any other options, and any advice on which way to go?

From Harm's reply, I guess I didn't make one question in my plea clear. Forget the reference to "title" footage, is there a utility that will modify an m2v file to remove a selected number of video frames at one (front) end? I realize one or two compression cycles would have to be redone and would suffer. Second question, could such a utility replace the removed frames with a new m2v segment? To do the compression at the "splice" there would need to be overlap and again the quality of that splice region would suffer a bit, but the rest of the m2v would be in "new" condition. For what its worth, my original m2v was done with CBR encoding and I have several still frame segments of a second or more which should be OK for the splice, if it is possible at all.
Thanks for your constructive comment, Jim.

How to make a backup of a Premiere project?

Hi everyone, do you know how can I make a backup on a external hard drive of a Premiere Pro project with videos, music, text, videos linked with after effects??
or, since for the project, I took files from different folders and even from the desktop for example, do you know how to put all the files in a single folder without losing the properties of the project in premiere?
thank you

thank you, but there is reported: "Project Manager does not collect and copy After Effects compositions that are dynamically linked to an Adobe Premiere Pro project. Project Manager does save the Dynamic Link clip in the trimmed project as an offline clip, however."
so what can I do?

How to make a slideshow of a book project?

I am new to Aperture (1.5.2), so apologies if this question has been handled previously. I could not find a solution on my own or in the manual or in a quick search of the forum.
I produced a book and ordered it from Aperture. Now I would like to view the book as a slideshow within Aperture. While in the book project, if I use shift-S, a slideshow will start, but it is of all of the photos I selected from in making the book, not the pages of the completed book itself. I know I have been able to do this in iPhoto, so I must be missing something obvious.
Thanks for any assistance.
J
MacBook Pro 15" Mac OS X (10.4.7)

Dear J....
We just had our annual cookie party for people in the neighborhood. My wife, who made about 1500 cookies this year, and I were host to our close neighbors. To show them the highlight of our trip to the Amazon, Machu Picchu, and the Galapagos in October, I printed the book as a .pdf file and showed in in Adobe Reader 8.0.
If you go to Preferences->Full screen and select the options that suit your presentation, I think you will provide the slideshow you see.
One further wrinkle...if you have Acrobat Pro, you can delete the cover page and the narrative page, then loop the presentation of pages, you will have a continuous slide show. I hope this helps.
Merry Christmas!
Don
G5 +MB Pro Mac OS X (10.4.8) Panasonic DMC-FZ20

Slow Phone 4s with ios8!! How to make it faster?

Slow Phone 4s with ios8!! How to make it faster? After upgraded ios8.1.1, my iPhone 4s Facebook become very slow response and always hand. Whastapp having same problem! Very lagging with safari too! It is really regret to upgrade since many peoples say upgrade will have this issue always

Slow Phone 4s with ios8!! How to make it faster? After upgraded ios8.1.1, my iPhone 4s Facebook become very slow response and always hand. Whastapp having same problem! Very lagging with safari too! It is really regret to upgrade since many peoples say upgrade will have this issue always

How to make a video for YouTube

Does anyone know how to make a short video on a Macbook, to put on YouTube?

For direct recording into YouTube or other Flash based video web sites, use Flash Settings to select between available microphones and cameras.
If you uneed help, see Adobe's microphone suppport info at http://tinyurl.com/3e5cnl Adobe Help for selecting your webcam is here: http://tinyurl.com/4pswu9
Only external (Firewire) iSight (out of production for several years) has a built-in microphone. If your Mac has a built-in iSight, it also has a separate, built-in, USB Mic.
Either kind of microphone can be selected in your  > System Preferences > Sound > Input settings.
If you want to use an external iSight with a Mac that also has a USB mic for some purpose other than recording directly into YouTube or another Flash based web site, you can usually select which mic to use depending on your desired purpose.
Many apps that can recognize multiple microphones allow you to select which micriphone either via a menu choice or the app's speparate Preferences... settings. As one example, here is how to select a mic in QuickTimeX:
Each app works its own way, and some apps can only access the curreent System Preference setting.
A side note for other readers who are using Mac OS X Lion 10.7.x: Neither FaceTime Version 1.1 (258) from OS X 10.7.1 nor the current Version 1.1.1 (262) from OS X 10.7.2 can use external iSight's Firewire mic. The firewire camera works, but the Fireiwire mic is not available for selection in FaceTime > Video.

How to make relative links

Hello.
I need your help.
Inside the public_html folder I have two files one index.dir and part1.dir The file (index.dir) I wanted to do html and I do the Regulating through public settings
My problem is that it will link files? I do not know how to do it and I want your help please.
How to make relative links?
Information my project test:
Script from index to part1
-- DESCRIPTION --
on getBehaviorDescription me
return \
    "GO NEXT BUTTON" & RETURN & RETURN & \
    "Moves the playback head to the next marker when the user clicks on the sprite." & RETURN & RETURN & \
    "PERMITTED MEMBER TYPES:" & RETURN & \
    "Graphic members" & RETURN & RETURN & \
    "PARAMETERS: None"
end getBehaviorDescription
on getBehaviorTooltip me
return \
    "Use with graphic members. " & \
    "Moves the playback head to the next marker on mouseUp."
end getBehaviorTooltip
-- HISTORY --
-- 3 November 1998, written for the D7 Behaviors Palette by James Newton
-- 5 January   2000: updated to D8 <km>
on mouseUp me
go frame "test1" of movie "pat1" -- test1 is Maker and the file is part1.dir
end mouseUp
on isOKToAttach (me, aSpriteType, aSpriteNum)
tIsOk = 0
if aSpriteType = #graphic then
    tIsOK = 1
end if
return(tIsOK)
end on
script from part1 to index
-- DESCRIPTION --
on getBehaviorDescription me
return \
    "GO PREVIOUS BUTTON" & RETURN & RETURN & \
    "Moves the playback head to the previous marker when the user clicks on the sprite." & RETURN & RETURN & \
    "PERMITTED MEMBER TYPES:" & RETURN & \
    "Graphic members" & RETURN & RETURN & \
    "PARAMETERS: None"
end getBehaviorDescription
on getBehaviorTooltip me
return \
    "Use with graphic members. " & \
    "Moves the playback head to the previous marker on mouseUp."
end getBehaviorTooltip
-- HISTORY --
-- 3 November 1998, written for the D7 Behaviors Palette by James Newton
-- 5 January   2000: updated to D8 <km>
on mouseUp me
go frame "Intro" of movie "index" -- Intro is Maker and the file is index.dir
end mouseUp
on isOKToAttach (me, aSpriteType, aSpriteNum)
tIsOk = 0
if aSpriteType = #graphic then
    tIsOK = 1
end if
return(tIsOK)
end on
Please help
Look my page for you to understand my problem www.ionio.gr/~aleksgeor

It looks like you have taken a behavior from the Library Palette and hard coded it to suit your needs. This was unnecessary. Instead try the following behaviors attached to buttons that take you between movies - assuming they are in the same directory:
on mouseUp me
gotoNetMovie("@/part1.dcr#test1")
end
on mouseUp me
gotoNetMovie("@/test.dcr#Intro")
end
Also, you should Shockwave-compress your files to DCR (see the Publish Settings) in order to make your movies as small as possible so they download quickly

HT5796 I was on a a different Apple ID and I logged out because they didn't want me on there anymore so I figured out how to make one and now it's not letting me upgrade or download anything. I rebooted my iPhone 5, iOS 7.0.4 multiple times nothing fixed

I was on a a different Apple ID and I logged out because they didn't want me on there anymore so I figured out how to make one and now it's not letting me upgrade or download anything. I rebooted my iPhone 5, iOS 7.0.4 multiple times nothing fixed my problem.

I was on a a different Apple ID and I logged out because they didn't want me on there anymore so I figured out how to make one and now it's not letting me upgrade or download anything. I rebooted my iPhone 5, iOS 7.0.4 multiple times nothing fixed my problem.

How to make downtime shorter in BI upgrade project

Similar Messages

Maybe you are looking for