How to make entry in table EDSDC?

Hi,
  Can somebody tell me how to make entry in table EDSDC?
  I need an urgent answer.
  Waiting to give good points.
Thanks,
Max

Hi ,
Go to SE16 , Enter View Name -> V_EDSDC and Click on Display / Change Button to maintain entries .
Please note that you must have authorization to do maintainance for this table ; failing which you can only view the table .
If you are unable to add entries , I can tell you an alternative for doing so , through debugging  .

Similar Messages

  • How to make entry into table J_1IEWT_ACKN

    Dear Sir,
    As per SAP Note 1172387 , for  printing Acknowledgement Number in TDS Certificate (Tcode used for Certificate generation is J1INCERT) , Records pertaining to Acknowledgement Numbers need to be created in Table J_1IEWT_ACKN .
    Kindly guide us , as how can we created Records into this table .
    With Thanks and Regards
    Sonia Agarwala

    Hi ,
    Go to SE16 , Enter View Name -> V_EDSDC and Click on Display / Change Button to maintain entries .
    Please note that you must have authorization to do maintainance for this table ; failing which you can only view the table .
    If you are unable to add entries , I can tell you an alternative for doing so , through debugging  .

  • How to make entry for transit loss in the system

    Hello to all,
    I am having an issue with one subCon material.
    Suppose,
    Material A is the product required of 3000 MT Qty.
    SubCon vendor have sent that qty, but there is a transit loss of 500 MT.
    How to make entry for this transit loss in the system.
    regards,
    Anisha

    correct me if i am wrong-
    ur scenario is
    for making material A ,
    3000 MT of material B required.
    but for producing A vendor uses 3500MT of B
    solution : if this ia the case then u can overwrite the value of B at GRN from 3000MT to 3500MT.
    OR
    ur scenario is -
    u require material A of 3000MT
    vendor sends u 3000MT
    but actualy u recieve 2500MT
    and u have to pay for 3000MT as per bill
    solution : if this is ur scenario then.
    prerequisite-activate direct posting to G/L and material at MIRO
    Path - SPRO->MM->LIV->activate direct posting to G/L and material at MIRO.
    now procedure is -
    step 1) do GR for 2500MT
    step2) in LIV pay to vendor for 3000MT for that put 500 qty in material tab and the relavent amount.
    in this way loss in transite will be book on inventory.
    regards,
    sujit

  • Please help : How to make the anomalistic table just like below?

    Hi all,
    How to make the anomalistic table just like below? Anyone can give the way detail or thoughtway ?
    http://61.132.17.188/webber/table.gif

    This is just a suggestion.
    If you put your "JTable" in a "JScrollPane", then you can add any "java.awt.Component" to the corner of the "JScrollPane" -- using the "setCorner()" method (of "JScrollPane").
    I would suggest making a custon "JPanel" and overriding its "paintComponent()" method to draw a diagonal line (and the required text) on it.
    You can find out more about how to do this from the links I provided in my first reply.
    Hope this helps.
    Good Luck,
    Avi.

  • Make entries in table T095

    Hi all,
    Iam unable  to make entries in table T095, if i use through se11->utilitis then create entry option is disabled. if i use sm30 then it saying " The maintenance dialog for T095 is incomplete or not defined" please give me procedure to maintain the table t095.
    Thanks&Regards,
    RP

    Hi,
    T095 is a standard SAP table and you wont be allowed to insert or update entries in this table directly.
    If you have authorization for SPRO, you can update this table via Financial Accounting. Otherwise, you can ask your FI functional consultant to provide you with values in the table so that you are able to use these in your program.
    The last option would be to write a few lines of codes in an ABAP program and use "INSERT" or "UPDATE" ABAP statements to update this table. But avoid this option as inconsistencies may occur because of this.
    Hope it helps.

  • How to make entry in a table e.g. vbak table

    how make entries in a table.
    what is the procedure.
    can i do it in  production directly?

    >
    Vijay Babu Dudla wrote:
    > it is not possible to do it directly in production. if you do that you will loose your job, don't practice those on production.
    More than loosing you job you are violating the contractual terms with SAP. You will simply loose all Support from SAP.
    I wonder how an ABAPer got a uid in Proction Server. Its a strict no-no in our organization.
    pk

  • How to make use of Table Maintanance Generator?

    PLs sany one can explain me how to maek use of Table maintanance Generator?
    Regards and cheers,
    Giri

    Hi,
        table maintainence Generator is used to manually
        input values using transaction sm30
        follow below steps
       1) go to se11 check table maintanance check box under
          attributes tab
       2) utilities-table maintanance Generator->
          create function group and assign it under
          function group input box.
          also assign authorization group default &NC& .
       3)
        select standard recording routine radio in table
        table mainitainence generator to move table
        contents to quality and production by assigning
        it to request.
       4) select maintaience type as single step.
       5) maintainence screen as system generated numbers
          this dialog box appears when you click on create
         button
        6) save and activate table
       using sm30 you can create entries manually.
    also check below thread to assign transaction code to
    table generator
    /message/240993#240993 [original link is broken]
    0#2409930  
    Regards
    amole

  • How to make a custom table?

    Ok, so an assignment is due today. I am up to the last part and what you need to do it make a custom graph, I have an iMac (OS X Yosemite) and I need to make a table like the one showed on the image I attached. If you look on the right hand side of the image, you see a row that says "Size" with three custom made columns which says: "Width", "Thickness and "Length". Please tell me, how I can make a custom table like the one below? Thanks.

    Select a group of cells, right-click on them and choose Merge Cells from the pop-up menu:
    Description, Material and Qty are two cells selected down and merged, Size is three cells selected across and merged.
    Hope this helps.

  • How to make a ranking table

    I want to make a ranking table and the data is saved on the Internet.
    I know how to read from a file on Internet, but how can I write a file on the Internet....

    Sorry, I think it is better for me to explain more.
    I want to make a ranking table according to the score of all players of the world
    Hence, I need to put the results over the Internet.
    What should I do?

  • How to make entries in TVDIR

    Hi,
    I want to maintain table J_1ISTATECD. When I try to maintain I get the message "The maintenance dialog is incomplete or not defined.". After debugging I found out that there needs to be an entry for table J_1ISTATECD in either TVDIR or DD25L.
    How to maintain the entry in TVDIR or DD25L.
    Please help.
    Regards,
    Sriram

    Hi,
    TVDIR is the view directory.
    Well, first you transfer required data from J_1ISTATECD to an internal table ITAB.
    Then update TVDIR from this internal table using :
    MODIFY TVDIR from TABLE <itab>.
    Hope it helps.

  • How to make horizantal repeating table?

    Hi All,
    I just want to make horizantal repeating table in InfoPath form. In brief, if insert new item in repeating table it should add next to first table not one by one.
    How to achieve this, thanks in advance!

    Hello,
    It should work in IP 2013 as well. Also make sure that you are designing client form because it does not works in browser based form.
    http://www.bizsupportonline.net/infopath2013/videos/infopath-2013-show-hide-columns-horizontal-repeating-table.htm
    Hemendra:Yesterday is just a memory,Tomorrow we may never see
    Please remember to mark the replies as answers if they help and unmark them if they provide no help

  • How to make a whole table row be read at once?

    Hi,
    I want to make a whole table row be read at once by screenreaders if the table is not editable?
    I tried to use "getAccessibleSelection" and return a own implementation which returns the number of columns at "getAccessibleSelectionCount".
    But if "getAccessibleSelectionCount" return anything else than 1, the method "getAccessibleSelection" is never called.
    Does anybody have a idea or a suggestion to solve this problem?
    Thanks in advance

    Hi AJL,
    If you mean a table of data values in the Data Portal, i.e. a list of channels, then yes you can do it. In that case you should just register load the channels you want to be read-only. You can do this interactively by right-clicking on the data file in question and select "Register data". You can also double-click on the file to select individual channels to load or register. Programmatically, this looks like
    Call DataFileLoad(DataFilename, DataPluginName, ImportAction)
    Setting ImportAction = "Register" will register load the channels. If dragging and dropping the data file loads it correctly, then you can set DataPluginName = "". Otherwise, you can specify there which DataPlugin to use for the import process.
    You can also programmatically selectively load some of the channels from the data source:
    Call DataFileLoadSel(DataFilename, FileImportFilter, ImportSelection, ImportAction)
    The "ImportSelection" parameter works just like the CNo() function in DIAdem:
    "GroupName/ChannelName"
    "GroupName/[ChannelIndex]"
    "[GroupIndex]/ChannelName"
    "[GroupIndex]/[ChannelIndex]"
    If, on the other hand, you mean a read-only table in the REPORT panel, your options are limited, though you can do that with a SUDialog.
    Regards,
    Brad Turpin
    DIAdem Product Support Engineer
    National Instruments

  • How to make a SCROLLABLE Table in ADF Faces ?

    Hi All,
    I want to make my ADF Table Scrollable (both Horizontally & vertically). It means when I have 30 rows on the table, I can make it only display 10 rows visible, then scroll it vertically.
    Also If I have wide tables(many columns) I can scroll it horizontally.
    Is it possible with ADF Faces ?
    (I look at FrameBorderLayout, but it seems not be able to do that )
    Thank you,
    xtanto

    Hi,
    What about the Horizontal scrolling ?
    for exampe :
    I have about 15 columns, the full page width can only shows 10, so I need to scroll horizontally, But I don't want to scroll the page, only the table.
    Is there any ADF Faces components for this ?
    or any commercial JSF components ?
    Thank you,
    xtanto

  • How to make a control table with the same number of rows of its itab

    I'm creating a control table, but it always have the maximum number of lines possible.
    How can I make it so that it has only the same number of rows of it's internal table?

    solved partialy with this:
    MODULE locka_lin OUTPUT.
      DATA: lin TYPE i.
      DESCRIBE TABLE t_obj LINES lin.
      table_con-lines = lin.
    ENDMODULE.                 "  OUTPUT
    but it still doent work when lin = 0
    any simple way to solve it on that case?
    Edited by: RagnaRock on May 5, 2010 6:00 PM

  • How to have entry in table INOB?

    Hi,
    I wish to know how an internal object no. entry can be created in table INOB for class type '022', Table 'MCHA' and Object having article and batch combination.
    Because of no entry in this table automatic picking of batch in LEFO order is not happening.
    Could someone help me with INOB table entries?
    Thanks in advance.

    hi,
    this is to inform you that,
    in AUSP - material number contains how many characterics that many internal object keys will be there for the respective materials.
    there will be link for AUSP & INOB.
    AUSP - ATINN = INOB - CUOBJ is related key field for these two tables.
    hope you understood your issue & by  this clears issue
    balajia

Maybe you are looking for