How to make EOIO for proxy messages in PI

Hi Experts,
We got different proxy outbound messages from ERP, we need to process all the messages in a sequence as it was sent from ERP, how can we make one queue in PI for all these messages.
Please give me some thoughts for this issue.

Refer to these blogs:
XI: Reliable Messaging u2013 EOIO in ABAP Proxies
/people/arulraja.ma/blog/2006/08/18/xi-reliable-messaging-150-eoio-in-abap-proxies
ABAP PROXY TO FILE u2013 Handling Heavy Volumes in SAP PI
/people/praveen.gujjeti/blog/2010/05/31/abap-proxy-to-file-150-handling-heavy-volumes-in-sap-pi
Regards
Raj

Similar Messages

How to maintain EOIO for JMS to multiple webservices scenario

Hi,
I have a requirement that
how to maintain EOIO for JMS to multiple webservices scenario.
JMS queue has multiple messages, each message has to be sent to either of 2 receivers.
How to maintain EOIO in case, when there are 2 receivers.
Regards
Sekhar

Hi,
since messages are split between 2 webservices receivers, each would have its own SOAP adapter.
So if order of messages in the JMS queues is M1, M2, M3 and M4 . There is a field based on which split happens.
Say, if M1 and M3 have to go Webservice1 (will have its own mapping)
and M2 and M4 have to go Webservice2. (will have its own mapping)
we'll have two receivers in the receiver determination and hence two Interface determinations.
The result should be
M1 delivered to Webservice1
M2 delivered to Webservice2
M3 delivered to Webservice1
M4 delivered to Webservice2
How will we maintain EOIO in this case?
Regards,
Balaji.M

How to Make BDC for transcation KKS1

Hi dear,
can any one tell me that how to make BDC for KKS1.
because i have recorded the BDC and converted into the program logic than it is showing the first window but not showing the window with ALV and futher more. So what coding i have to apply.
Please help.
Siddarth Jain

Hi,
U can record the flow in using SHDB transaction recorder.
U can record and it will generate the program, u can copy and paste the part of the code that is generated, in ur ALV report. this will call the transaction.
Do as follows:
SHDB > New Recording > Specify Recording Name YTEST > Transaction code KKS1 > STRAT RECORDING BUTTON>
then speciy the vales u want to give to run the transaction. U can save and come back as soon as u reach the screen when u want to stop it.
EG:
Declare a messtab
DATA: i_bdcdata TYPE STANDARD TABLE OF bdcdata,
* Internal table to hold BDC messages
i_messtab TYPE STANDARD TABLE OF bdcmsgcoll
* Work area to hold bdcdata value
DATA: w_bdcdata TYPE bdcdata,
* Work area to hold BDC messages
w_messtab TYPE bdcmsgcoll.
CONSTANTS : c_e type bdcmsgcoll-msgtyp value 'E', "E
c_a type bdcmsgcoll-msgtyp value 'A', "A
nodata type c value '/'. "/
perform f1000_bdc_mm03 using lv_matnr lv_werks.
FORM f1000_bdc_mm03 USING P_LV_MATNR
P_LV_WERKS.
perform bdc_dynpro using 'SAPLMGMM' '0060'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RMMG1-MATNR'
p_lv_matnr.
perform bdc_dynpro using 'SAPLMGMM' '0070'.
perform bdc_field using 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(15)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_field using 'MSICHTAUSW-KZSEL(15)'
'X'.
perform bdc_dynpro using 'SAPLMGMM' '0080'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-WERKS'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_field using 'RMMG1-WERKS'
p_lv_werks.
perform bdc_dynpro using 'SAPLMGMM' '4000'.
perform bdc_field using 'BDC_OKCODE'
'=ZU01'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_dynpro using 'SAPLMGMM' '4300'.
perform bdc_field using 'BDC_OKCODE'
'=ZU08'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_dynpro using 'SAPLMGMM' '4110'.
perform bdc_field using 'BDC_OKCODE'
'=GESV'.
*perform bdc_field using 'BDC_CURSOR'
* 'RMMG1-MATNR'.
call transaction c_transaction_call_MM03 using i_bdcdata MODE 'N'MESSAGES INTO i_messtab.
Kindly close the previous threads opened by u.
Message was edited by: Judith Jessie Selvi

How to make entry for transit loss in the system

Hello to all,
I am having an issue with one subCon material.
Suppose,
Material A is the product required of 3000 MT Qty.
SubCon vendor have sent that qty, but there is a transit loss of 500 MT.
How to make entry for this transit loss in the system.
regards,
Anisha

correct me if i am wrong-
ur scenario is
for making material A ,
3000 MT of material B required.
but for producing A vendor uses 3500MT of B
solution : if this ia the case then u can overwrite the value of B at GRN from 3000MT to 3500MT.
OR
ur scenario is -
u require material A of 3000MT
vendor sends u 3000MT
but actualy u recieve 2500MT
and u have to pay for 3000MT as per bill
solution : if this is ur scenario then.
prerequisite-activate direct posting to G/L and material at MIRO
Path - SPRO->MM->LIV->activate direct posting to G/L and material at MIRO.
now procedure is -
step 1) do GR for 2500MT
step2) in LIV pay to vendor for 3000MT for that put 500 qty in material tab and the relavent amount.
in this way loss in transite will be book on inventory.
regards,
sujit

How to make folders for pitcures on iphone 4

how to make folders for pitcures on iphone 4?

sorry about that..Where do i find the replies to my posts? tks

Example to demonstrate how to make rebate for business

Hello Gurus,
please give a example to demonstrate how to make rebate for business?
thanks very much!

hi
Rebates Processs in SAP is divided into three components
1) Configuring Rebates
2) Setting Up Rebates
3) Managing rebate agreeeements and payments
Pre-requsiistes- Check the following:
1.The payer partner needs toi have the rebate field checked in the customer master on the sales area-billing doc tab.
2.The Billing type must be marked as relevant for rebates.
3.The Sales Organisation must be marked as relevant for rebates.
Condition Technique :
Rebates, use the condition technique, but distinguish themselves from pricing in applying to transactions over time, versus on a transaction basis. Rebates have their wn field catalog and their own condition table naming convention.So you could have two condition table "001" one for pricing and one for rebates, which could have different key fields. You need to use the technical names A001 For pricing and KOTe001 for rebates when you use the query type using transaction SE 16..
Use create access sequence (AS). Enter 1 in field category for rebate specific. AS after going thru the right path of maintaining access sequence for rebates.
The big difference between the rebate and the pricing access sequence is that there is no exclsuion flag available for rebate related AS. This means multiple tables for an access sequence can be aplied at the same time.
Rebate related condition types are identified by codnition class -C.
After defining and creating condition types for rebated include them in the pricing proceedure. The requirement should be 24 here which implies that the accruals are calculated on the basis of invoice/bill.
The other fields- alctyp and altcbv does not allow you to manipulate how a rebate is calculated. Also, remove the requiremnt 24, if u want to see reabtes at order time.
Now payment of rebates:
Payments can be maunal or in full settlement. When you do manual payments, it defines how much can be paid out during a partial settlemetn. You use partial settlement only when rebate agreement is defined for a full year but the paoyouts are supposed to happen on a monthly, quarterly or anyother specified period.
These accurals are based on sales volume and when they are posted billing is created int eh follwoing manner. Provision for accruals is debited and Sales revenue is credited. When rebate credit memo is created
Customer account/ is debited and
Accrual provision account is credited.
Also, please note that when rebates are created without dependent ona material but on customer/material you need to refer to a material for settlement.
First of all rebates are more or less discounts which are offered to customers. The rebates are based on the volume of the business the customer does with you within a specified time. for eg if the customer agrees for Rs.1 Crore worth of business with u in 1 year, then you activate your rebate porocess. if at the end of the year the customer DOES achieve the target u offer him say 2/3/4 % whatever is decided. The rebates are passed on to the customer in the form of Credit notes.
The rebate can be given to the customer at one time or in installments also.
This is broadly the outline of the rebate process.
Note : I recomend you to study the theory part of why rebate and why not a discount.
This will help you understand better.
May be I can help you with rebate process.(IN -IMG)
1. define a rebate agreement type
2. define a condition type group
3. define a condition type and place this condition
Type in the pricing procedure.(REQUIREMENT=24)
ALSO IN THE PROCEDURE- ACCRUAL KEY = ERU
YOU ALSO HAVE TO DO THE ACCOUNT DETERMINATION FOR REBATES.
Once you have defined all the 3 and assignment starts.
Assign the agreement type to the condition type group
Assign the cond type group to the condition type.
Condition technique is also used in rebates.
REBATE ACTIVATION- IN CUSTOMER MASTER, SALES ORGANISATION AND FOR THE BILLING DOCUMENT.
After having done this please proceed to maintain the condition record for the rebates (transaction code-vbo1)
Note: if you maintain the requirement coloumn with the requirement as 24 - the rebate will be affected in the billing document and if you dont give the requirement as 24 your rebate will be affected in the sales order.
The rebate process is completed when you have created a credit memo to the customer.
The document type for the partial settlement is R3.
Please make sure you open two screens SO THAT YOU CAN COMPARE THE NEW ENTRIES WHAT EVER YOU'RE DEFINING WITH THAT OF THE STANDARDS or first you try with the standard condition type boo1, boo2
boo3 boo4.
AFTER YOU HAVE FINISHED A COMPLETE SALES CYCLE OF CREATION ORDER , DELIVERY AND BILLING.
GO TO THE CONDITION RECORD IN CHANGE MODE (VB02) AND SETTLE THE ACCOUNT PARTIALLY.
In a simple way,
1. First you need to create a Rebate agreement.
2. Create condition record for rebate giving the rebate rate and accrual rate.
3. when the rebate relevent billing doc is generated, the rebate and accruals are determined and posted in a seperate GL account as a noted item - amount to be settled. Also it gets copied in the rebate agreement.
4. create settlement run using credit memo request and then credit memo to settle this amount with the customer.

How to make password for macbook

how to make password for macbook

Go to System Preferences - Users and Groups, select your user, and click Change Password. If you currently have a blank password, type nothing in the "Current Password" box.
Matt

How to make root for lenovo a3500

Hey Guys
I need to know how to make root for lenovo a3500
I tried Kingo Android Root but it didn't do anything
Need help guys and thanks

I haved to try vroot, but unsucess. I haved upgrate android 4.4.2 and try used kingoroot and vroot unsucess. Who do try sucess? Help me?

How to make an ABAP Proxy public as an asynchronous WebService

Hello together,
i have made an ABAP-Proxy public as an WebService by generating the WSDL from the directory for my asynchronous outbound interface. This outbound interface is mapped to the ABAP-inbound interface and so on. This works fine.
But actually i don't need any mapping. So i'm thinking about to how to send the WebService directly and to the ABAP-Inbound-Interface asynchron.
1. Is this possible at all (and how), and if so
2. does it makes sense in order to improve the performace (there is a mass-processing in behind)?
Gunnar

Gunnar,
I guess its simple...go for SOAP to Proxy scenario.
If ur source and target structure is same ..u need not require mapping.u can execute the scenario without mapping also.
I have done same scenario 2 months ago.....
following things u need to do.
1)create outbound message interface
2)create inbound message interface
3)No need of message mapping and interface mapping(if u dont require any transformation of source structure)
4)create WSDL for outbound message interfce
5)create proxy for inbound MI
6)write the necessare code in ur proxy
7)using any SOAP editor like XML spy send data to proxy...
u have done the work!!!!
All the best
regards
biplab

How to make suggestion for improvements in LR

How do I make suggestions for new features or improvements in LR?
The stacking function, IMO, needs to be improved. The time between shots does not take into account the length of exposure. For example if my exposure is 5 seconds the stacking exposure will not add the two exposures together in the time setting < 4 seconds.
Ideally I would like to see an HDR stacking function, looks at time between exposures (taking into account the length of exposure) and changes in exposure.
ideally there would be similar options for pans and focus stacking.
Thanks
Rich

Submit a feature request or bug report
Go to the above site.

How to display Help for the message in our program

Hi Experts,
Do any one know how to display the HELP for the Message in our ABAP program? Just like the user click the Long Text button in SE91.Do we have any function modules or Class method to do that? Thanks in advance.
Joe

Hi Joe,
While creating a message class in se93, theres a button (documentation) on the application tool bar. Click on that and you will be lead to a text editor where you can fill in the necessary documentation for the message you have created.

How to Make field for selection in the datasource.

Hi All,
I want to enable one field in the DataSource for selection. I am not getting where can we make that enable.
I know we have one check box in transfer structure for make file for selection. But I am getting that is grayout , not able to check that ?
Please let me know where can we change the setting to make it enable.
regards
Ashutosh D

Look at Roberto's reply in the below post :
Re: Hos to make a filed to be required field when creating datasource
What is ur datasource ..?
Have u tried RSA6 Change Mode for that datasource - Flag Selection?
Message was edited by:
Jr Roberto

How to Send Emails for failed messages without using Alert

Hi Experts,
In our project, we need to trigger Emails for the failed messages in SXMB_MONI / Adapter Engine without using Alert Framewrok.
Please let me know the below :
1. Is this really possible to avoid Alert?
2. If possible, then can we accomplish this by creating any PI Scenario? Please provide me some knowledge.
3. Can we do it by writing any ABAP Code? If ABAP report can make it, then please provide me the code/ tables which will be needed. If any Blog/ Wiki is there, then please let me know the URLs.
Thanks,
Nabendu.

Hi Nabendu,
If your customer asks for mails with specific text for message failure, tell that it is not possible. Because Message will go through several engines like Adapter Engine, Integration Engine, BPE. You can not generate mails for the message failures in all these areas with out standard alert mechanism. These are pure technical alerts which only PI people can understand, not business alerts.
Example: assume your sender channel is unable to connect FTP Server, in this case you can not generate even though you will develop adapter module to generate alerts.
So for message validation only you can send mails not for message failures.
thanks,
madhu

How to make Mail stop marking messages from my Contacts as Junk?

I use Mail to access both my Gmail and Mac mail. Mail has begun marking as Junk messages from my Contacts, including VIPs. In Preferences, I have checked the boxes to have Contacts and Previous Recipients exempt from email filtering, yet they still sometimes end up marked as Junk and sent to the Junk folder. These are all Gmail messages: I use my iCloud account very little. I've unchecked the Trust junk mail headers... and Filter junk mail before applying my rules. I don't see how to make Mail leave my Gmail alone! Can anyone help?

Google recommends turning off Apple mail Junk filters if using gmail filters.

How to make lines for "fill in the blanks?" (iWork Pages 09)

This should be easy since it's something many people do: design a form for others to fill out with a pen or pencil. However, I can't find any information regarding how to make a line after text, like this:
Name _________________ Address _________________________________ Phone __________
...without using the underline character.
Back on the Clarisworks days there was some way to make nice neat lines after text using tabs. However, It's been so long that I can't recall how it worked. I've Googled this issue using every logical term I can think of but found nothing useful. The Pages 09 help file and the user guide seem to be mute on this subject. The Word 2008 help file is similarly silent. However, I'm sure that the greater Pages community knows the answer to this one.
Thanks,
Bill

What you want is called a tab leader. In Pages, to create the underline:
To create a new tab stop using the Text inspector, click in the document where you want to create a new tab stop, click Inspector in the toolbar, and then click Tabs. Click the Add button in the bottom-left corner of the Tabs pane. The new tab stop appears in the Tab Stops column.
Then use the Leader drop down menu to choose a solid line:

How to make EOIO for proxy messages in PI

Similar Messages

Maybe you are looking for