How to make flash play movieclip for rollout effect on button

I am using AS2 and I'm trying to figure out how to do a RollOut effect using buttons and getting nowhere. You'd think it would be easy!
I have a movieclip within the "over" section of my button, which contains both an roll over and a roll out animation. My problem is that I cant seem to get flash to play the rollOut animation.
I placed the following code in the button itself
on (rollOut) {
this.start_mc.gotoAndPlay("mouseOut");
Does anyone have any suggestions? I tried setting up a function to find when the user rolls off the button but it didn't work either. Any help would be very much appreciated.
Thanks!
Eileen

Code inside a button will not work. The code you show would have to be attached to the button, but a button only has the properties that Flash defines for it (unlike movieclips where you can assign all the properties you like). So you wouldn't be able to target a movieclip inside a button symbol because the button does not have such a property.
Buttons are self animating objects. You do not need to code to make them perform rollover/rollout animations. But a button does not have a rollout frame, just the Up frame. So you would need to have your rollout animation be in the up frame, where it settles to be the button as you see it without interacting with it.
What you might try instead of using a button is to use a movieclip as a button, Then you can control which frame it is in as you wisdh as well as command things within it to function.

Similar Messages

How to make Flash to wait for user input

Hi,
I found this PHP script, then I made some changes to make it
FEED the Flash user interface with online user input.
The main concept of this script is WAITING for user input, so
it shows the messages and then go to next line and so on.
The user input go to directly to TEXT file which writes in
lines, each line has a unique id = (mag_id).
There "get_msge.php" which works as the middleware between
FLASH and messages text file.
The problem, its doesn’t show any data while there are
data in the text file.
Help here please, best regards.
This is the link of
problem illustartion
AS is:
// create an object to store the variables
varReceiver = new LoadVars();
// load the variables from the text file
varReceiver.load("get_msg.php?file_id=1&msg_id=1",
"POST");
// trigger something - when the variables finish loading
varReceiver.onLoad = function(){
//the variables have finished loading
if (this.msg_id == 1) {
_root.xmsg1_swf.text = this.msg;
_root.xmsg1_ch.text = this.msg;
gotoAndPlay("line2");
} else {WAIT }
PHP is:
<?php
//get these values from the FLASH
$file_id_swf = $_POST ['file_id'];
$file_name = "messages/messages".$file_id_swf.".txt";
$msg_id_swf = $_POST ['msg_id'];
// [0] ."||".[1] ."||".[2] ."||". [3] ."||".[4]."||". [5].
//$msg_id."||".date."||".time."||".$from."||".$to."||".$msg.
$fp = fopen ($file_name, 'rb');
while (!feof ($fp))
$msg_txt = fgets ($fp, 1024);
$line = explode ("||", $msg_txt);
$msg_id = $line[0];
$from = $line[3];
$to = $line[4];
$msg = utf8_encode ($line[5]);
if ($msg_id == $msg_id_swf)
echo
"msg_id=".$msg_id."&from=".$from."&to=".$to."&msg=".$msg;
}//while
fclose ($fp);
?>

Well, given the things that you've written, I don't think it
could. There technically isn't any code in flash that lets it
"wait." In order to "wait," you must run the script over again
until some condition is met.
However, your code does look accurate. Why do you need to
wait? The onLoad function will be invoked WHEN something is loaded.
So, I don't see the reason for the "waiting."
In addition to that, I would like to say that using text
files isn't that great with flash. I have done this before and
noticed several problems with using text files. The biggest problem
is that the text files are cached after being loaded. Every time
you re-load it again, you will get what you got the first time
until you reset your cache (ie. close your browser). I suggest
using MySQL. (Just my thought.)

How to make mplayer play 3gp type files ??

how to make mplayer play 3gp type files ??
I downloaded a Japanese blue movie by amule, but I cannot play it!

Army wrote:Actually, a few weeks ago, opencore-amr went into [extra] and ffmpeg and mplayer are being compiled against it, so Arch's mplayer should support 3gp files ootb including audio. Video playback was never an issue, because 3gp is just a container, the video codec is usually h263 or h264, which are no problem for mplayer.
Very new versions of FFmpeg have native amr-nb support. I'm not sure if it happened before or after the most recent FFmpeg bump in the repos.

How to make a good referencing for my web site

hi. i start with muse and would like to know how to make a good referencing for my web site; thanks for your answers...

Google and search the forum for: SEO or Search Engine Optimisation

How to make saved IR available for all users

Hi,
I've created IR and saved it to several tabs based on search conditions.
But they're only visible for developers.
How to make these tabs available for all end-users ?
Does version 4.0 support this option ?
Thank you!

Hi
At present this feature is not included, although I believe it may be in 4.0. Many people have provided workarounds for this. None of which I have tried. I cannot find the original thread but here is a solution from a chap called Ruud
>
One way to share your saved reports with others is to 'Publish' your report settings to a few intermediate tables in your application and have other users 'Import' your settings from there. The reason for using intermediate tables is so that not all your saved reports need to be 'visible' to other users (only those that you've chosen to publish).
Basically you have available the following views and package calls that any APEX user can access:-
- flows_030100.apex_application_pages (all application pages)
- flows_030100.apex_application_page_ir_rpt (all saved reports - inclusing defaults and all user saved reports)
- flows_030100.apex_application_page_ir_cond (the associated conditions/filters for above saved reports)
- wwv_flow_api.create_worksheet_rpt (package procedure that creates a new saved report)
- wwv_flow_api.create_worksheet_condition (package procedure that creates a condition/filter for above saved report)
The way I've done it is that I've created 2 tables in my application schema that are straightforward clones of the 2 above views.
CREATE TABLE user_report_settings AS SELECT * FROM flows_030100.apex_application_page_ir_rpt;
CREATE TABLE user_report_conditions AS SELECT * FROM flows_030100.apex_application_page_ir_cond;
( NB. I deleted any contents that may have come across to make sure we start with a clean slate. )
These two tables will act as my 'repository'.
To simplify matters I've also created 2 views that look at the same APEX views.
CREATE OR REPLACE VIEW v_report_settings AS
SELECT r.*
p.page_name
FROM flows_030100.apex_application_page_ir_rpt r,
flows_030100.apex_application_pages p
WHERE UPPER ( r.application_name ) = <Your App Name>
AND r.application_user 'APXWS_DEFAULT'
AND r.session_id IS NULL
AND p.application_id = r.application_id
AND p.page_id = r.page_id;
CREATE OR REPLACE VIEW v_report_conditions AS
SELECT r.*
p.page_name
FROM flows_030100.apex_application_page_ir_cond r,
flows_030100.apex_application_pages p
WHERE UPPER ( r.application_name ) = <Your App Name>
AND r.application_user 'APXWS_DEFAULT'
AND p.application_id = r.application_id
AND p.page_id = r.page_id;
I then built 2 screens:-
1) Publish Report Settings
This shows 2 report regions:-
- Region 1 - Shows a list of all your saved reports from V_REPORT_SETTINGS (filtered to only show yours)
SELECT apex_item.checkbox ( 1, report_id ) " ",
page_name,
report_name
FROM v_report_settings
WHERE application_user = :APP_USER
AND ( page_id = :P27_REPORT OR :P27_REPORT = 0 )
ORDER BY page_name,
report_name
Each row has a checkbox to select the required settings to publish.
The region has a button called PUBLISH (with associated process) that when pressed will copy the settings from
V_REPORT_SETTINGS (and V_REPORT_CONDITIONS) into USER_REPORT_SETTINGS (and USER_REPORT_CONDITIONS).
- Region 2 - Shows a list of already published reports in table USER_REPORT_SETTINGS (again filtered for your user)
SELECT apex_item.checkbox ( 10, s.report_id ) " ",
m.label,
s.report_name
FROM user_report_settings s,
menu m
WHERE m.page_no = s.page_id
AND s.application_user = :APP_USER
AND ( s.page_id = :P27_REPORT OR :P27_REPORT = 0 )
ORDER BY m.label,
s.report_name
Each row has a checkbox to select a setting that you would like to delete from the repository.
The region has a button called DELETE (with associated process) that when pressed will remove the selected
rows from USER_REPORT_SETTINGS (and USER_REPORT_CONDITIONS).
NB: P27_REPORT is a "Select List With Submit" to filter the required report page first.
Table MENU is my application menu table where I store my menu/pages info.
2) Import Report Settings
This again shows 2 report regions:-
- Region 1 - Shows a list of all published reports in table USER_REPORT_SETTINGS (filtered to show only other users saved reports)
SELECT apex_item.checkbox ( 1, s.report_id ) " ",
m.label,
s.report_name,
s.application_user
FROM user_report_settings s,
menu m
WHERE m.page_no = s.page_id
AND s.application_user :APP_USER
AND ( s.page_id = :P28_REPORT OR :P28_REPORT = 0 )
ORDER BY m.label,
s.report_name,
s.application_user
Each row has a checkbox to select the setting(s) that you would like to import from the repository.
The region has one button called IMPORT that when pressed will import the selected settings.
It does this by using the 2 above mentioned package procedure to create a new saved report for you
with the information form the repository. Be careful to match the right column with the right procedure
parameter and to 'reverse' any DECODEs that the view has.
- Region 2 - Shows a list of all your saved reports from V_REPORT_SETTINGS (filtered to only show yours)
SELECT page_name,
report_name
FROM v_report_settings
WHERE application_user = :APP_USER
AND ( page_id = :P28_REPORT OR :P28_REPORT = 0 )
ORDER BY page_name,
report_name
This is only needed to give you some feedback as to whether the import succeeded.
A few proviso's:-
a) I'm sure there's a better way to do all this but this works for me :-)
b) This does not work for Computations! I have not found an API call to create computations.
They will simply not come across into the repository.
c) If you import the same settings twice I've made it so that the name is suffixed with (2), (3) etc.
I did not find a way to update existing report settings. You can only create new ones.
d) Make sure you refer to your saved reports by name, not ID, when matching APEX stored reports and the
reports in your repository as the ID numbers may change if you re-import an application or if you
auto-generate your screens/reports (as I do).
Ruud
>
To me this is a bit too much of a hack and I personally wouldn't implement it - it's just an example to show it can be done.
Also if you look here in the help in APEX Home > Adding Application Components > Creating Reports > Editing Interactive Reports
...and go to the last paragraph, you can embed predicates in the URL.
Cheers
Ben
http://www.munkyben.wordpress.com
Don't forget to mark replies helpful or correct ;)
Edited by: Munky on Jul 30, 2009 8:03 AM

How to make warehouse field inactive for all users in all documents autom.

Hi All,
Can anyone pls tell me "**how to make warehouse field inactive for all users in all documents without having to do it through form setting** "for each and every user. It should be visible but inactive
Thanks & Regards,
Mukesh Agrawal

Hi,
As a work around create a warehouse SelectWH and map the mandatory acoounts as a On hold account(in chart of accounts).So there will not be any posting on this account.
And set this warehouse as default warehouse for all users.
So without selecting the appropriate warehouse the user can not add the document.
I think this might resolve you issue.

How to make jar files availabe for deployed EJBs

Hi,
I'm interested on how to make jar files availabe for deployed EJBs.
My EJB is packed in an ear. It uses a util jar. I now just add the jar to the
classpath, but I think that shouldn't be the way. Is there somthing in the admin
console to make jars available or do I have to insert it in the ear file? And
if so, where do I hve to place it?
Thanks
Claudia

Put the util.jar in the ear with your ejb jars - at the same level (i.e. in
the root) - but do not include them in the manifest.xml.
Also each ejb jar that refers to util.jar must have util.jar on its internal
classpath in the manifest.
"Claudia" <[email protected]> wrote in message
news:3d537db5$[email protected]..
>
Hi,
I'm interested on how to make jar files availabe for deployed EJBs.
My EJB is packed in an ear. It uses a util jar. I now just add the jar tothe
classpath, but I think that shouldn't be the way. Is there somthing in theadmin
console to make jars available or do I have to insert it in the ear file?And
if so, where do I hve to place it?
Thanks
Claudia

How to make a group contacts for iphone 4s, How to make a group contacts for iphone 4s

How to make a group contacts for iphone 4s

Or there are apps
https://www.google.co.uk/url?sa=t&source=web&cd=3&ved=0CEEQFjAC&url=https%3A%2F% 2Fitunes.apple.com%2Fgb%2Fapp%2Ftext-2-group-fast-sms-imessage%2Fid519077434%3Fm t%3D8&ei=WCkfUc6vE8THtQavlYCoBw&usg=AFQjCNHnoWUqJ9AMYWCadVceOkq-6Ed4Vg

How to make the logs captured for Z fields in ME21N/ ME22N

Hi
I have devloped new tab(Screen) and added Z field in the PO header (ME21N) as per my requirement. But whenever I do changes to the perticular Z field, logs are not captured (ME21N->ENVIRONMENT-->HEADERLOG). How to make the logs captured for Z fields like standard fields. Is there any way?
Regards
Raj.

HI Ranjitha
For the data element of Z fields go to further caracteristics of tab and make change document checkbox ticked.

How to make a portlet unvisible for another(not Owners) Users?

Hi all,
I (Site-Owner) have create a little Portal-Site with any portlets.
I want to make one or two portlets(Admin-Area) unvisible for other users. But when I create a portlet as Site-Owner, then all another users can they see.
How to make a portlet unvisible for another users?
Regards
Leonid Pavlov

You can hide and show portlets of Web providers (OmniPortlet, Web Clipping, and Java portlets) on portal pages dynamically. This functionality is controlled by security managers. The PDK provides a number of security managers. For example:
o Group security manager: The group security manager makes the portlet appear to users who are members of a specified group, while hides the portlet for those who are not members.
o Authentication level security manager: You can use the authentication level security manager to control access to the portlets based on the users authentication level. For example you may hide the portlet from public users, but display it to authenticated users.
In addition to the security managers provided by the PDK, you can build your own security managers.
Although OmniPortlet and Web Clipping do not expose security managers through the user interface, you can apply them by editing their XML provider definition file.
For PL/SQL portlets you can use the is_runnable method to control whether the portlet is hidden or shown.
Peter

How to make a loop run for specific period of time ?

hello !
i'm new to labview and could'nt found how to make a loop run for 2 sec for example, and then to exit.
Solved!
Go to Solution.

Hi Hookso,
You can do it using the different loops like While loop and For Loop. Roderic has already stated how to do it using a for loop. I have illustrated in the attached vi how to do it using a while loop and Elapsed Time function. Take a look.
Regards,
Nitzz
(Give kudos to good Answers and Mark it as a Solution if your problem is Solved)
Attachments:
Untitled 2.vi ‏36 KB

How to make custem sized book for example 12inch x 8 inc, 18 inch x12 inch

how to make custem sized book for example 12inch x 8 inch, 18 inch x12 inch

I'm afraid there is no way to do this currently available.

Does anyone here know how to make a background soundtrack for a Tai Chi Video?

Good morning,
Does anyone here know how to make a background soundtrack for a Tai Chi Video in Garageband. I have been looking around at the different sounds and music in Garageband but I have not been able to find anything that would go with the video.
Here is an example of a Tai chi video if you were wondering
http://youtu.be/a6pJf2otwv8
I want to create something like this for a video I did for a fitness gym for a Yoga instructor and Tai Chi instructor.
Any tips would be appreciated.

Brandon,
you will not have to do any importing in GarageBand. Intalling Mainstage will extent GarageBands Loop Library and Instruments Library.
After you installed MainStage the additional loops and Instruments will show in GarageBand just like all other Loops. you will simply see more loops.
For example:
or:

I just installed an update on my iPhone and since then the choice to repeat music, or not, has disappeared and it automatically plays songs and albums on a loop. Anyone know how to make it play an album or song just once?

I just installed an update on my iPhone and since then the choice to repeat music, or not, has disappeared and it automatically plays songs and albums on a loop. Anyone know how to make it play an album or song just once?

Basics from the manual are restrt, reset, restore.
Have you tried each of these?

HT4528 i am new to iphone. i downloaded a song but don't know how to make it my ringtone for incoming calls. can someone help?

I just got an iphone4. I downloaded a song but i don't know how to make it my ringtone for incoming call. Can someone help?

YOu can't use the whole song for a ringtone, you would have to create one 30 second or less.
YOu can download an app to create the ringtone.

How to make flash play movieclip for rollout effect on button

Similar Messages

Maybe you are looking for