How to make free size in undotablespace

how to make free size in undotablespace
how to remove expiried values in undotablespace??
Edited by: user10896195 on Mar 4, 2011 11:23 AM

an undo tablespace is simply a tablespace where Oracle decides how many RBS's to create
and how big they should grow to.
Under the covers -- it is still JUST ROLLBACK SEGMENTS -- no different. It is just that
WE decide how many and how big instead of you.
If you have an undo retention period that is very small, there is nothing to motivate us
to extend an rbs -- hence you have the same problem. You want to up the undo retention.
Bear in mind that this parameter (retentation) is a SUGGESTION from you to us. It'll not
cause us to "blow out" undo space - if you constrain us to x megabytes -- we'll stop.
See
http://asktom.oracle.com/pls/asktom/f?p=100:11:::::P11_QUESTION_ID:6894817116500
Edited by: Santosh Deshmukh on Mar 3, 2011 11:42 PM

Similar Messages

Skype for Android Phone Video: How to Make Free Vo...

Our how-to videos will teach you everything you need to know to get started with Skype. Now, learn how to make free voice and video calls on Skype for Android.
Was this video helpful? Could you get your contact added?

pls i want to know how to make call with Skype. If am calling some one the person will not pick the call it look as if the person is not seeing the call. pls ur help.thnx

How to make components' size constant?

I have a newbie question for you. How to make the size of components (button, combobox, etc...) constant? I mean they keep the same size as the users change window's size.
Thanks.
Sraiper

You need to use a layout manager that respects the minimum and maximum size of the components and set the minimum and maximum sizes to be the size that you want the component to be. FlowLayout respects minimum and maximum, and so does BoxLayout. BorderLayout and GridLayout don't respect the min or max sizes. You can usually get what you want with a combination of layout managers. If you gave me a better idea of how you want to layout your components, and what you want the resizing behavior to be, then I could give you some more specific recommendations about the layouts you should use.
Try making some ascii drawings.
Example:
        small size window              large size window
    |                       | |                                      |
    | []check     o radio   | | []check                             |
    | []check     o radio   | | []check                   o radio   |
    |             o radio   | |                                      |
    | ___________________ | |                            o radio   |
    | |_____textfield_____| | |                                      |
    | ________   ________ | |                            o radio   |
    | |_button_| |_button_| | |                                      |
    |_______________________| | __________________________________ |
                               | |____________textfield_____________| |
                               |                 ________   ________ |
                               |                |_button_| |_button_| |
                               |______________________________________|Make sure you put
before and
after your drawings so the forum doesn't mess them up.

How to make window size same as linked file?

Hi
I understand how to make the link and have it open in a new
window upon click, but how do I make this map open in a window that
is exactly the same dimensions as the map png file itself, as
opposed to opening in the same size of the browser window.
http://www.enhancedwireless.net/Company/contact.shtml
and click on the MALAYSIAN driving directions.
Thanks
KB

That works fine and is quite acceptible, but it won't work
for the initial
default page - which is what the question is about.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"818g" <[email protected]> wrote in message
news:egm8m5$gd5$[email protected]..
> I'd do it with javascript. Highlight the link text in
Dw, type
> "javascript:;"
> in the link box, hit enter, open the Behaviors panel,
click on the Add
> behavior
> button (plus sign) and choose "Open Browser Window" from
the menu. In the
> Open
> Browser Window dialog box you can define the width anf
height of the
> window.
>

How to make free space on your start up disk

Hey!
I'm experiencing some problems with my MacBook Pro. Everytime I'm trying to save something or downloading something, it say my start up disk is almost full. And sometimes it tells me I have to quit applications to make space.
How can I make free space, I mean, I can't have used all the memory on my computer already, I've only had it for a year. I'm guessing I've got a file that's taking up a lot of space. How can I identify it? And how can I make free space on my start up disk?
Thanks for the help,
leozinho2r

Download and use either WhatSize or Omni Disk Sweeper to see what files are filling your drive. Trash them if you don't need them.

How to make page size %100?

Hi everyone,
I am asking for you help how to change the size of page (artboard)
I want to design a photography portfolio, and when website is opened, I want sizes of entire page to be %100 width and height, like in http://sisila.dphoto.com
Does the software only allows us to generate pages like 600x800 or let me say 400x500?
thanks in advance

Hi!
Nowadays, i think is not possible without importing the catalyst project in Flash Builder and editing the code. Please, correct me if I'm wrong.
Gabri <U>

How to make different size images the same size pdf in Acrobat.

I am trying to place 2 different size images into acrobat to create a pdf but one image is half the size. How do i make each page the same size when the images are different sizes?

Thank you, I changed the image size to match and then placed them in acrobat.

How to make Image/size/resolution agree with metadata resolution?

After scanning the help file a bit and searching thru this forum a bit with `metadata resolution' as search criteria, I'm still pretty confused about how it is supposed to work.. I may have never actually found the right part of the help file.
Cutting to the chase: How can I make the resolution reported by the metadata tab for resolution agree with what is reported inside photoshop at Image/size resolution. I didn't see any way to set how res is reported in bridge.
I see many pictures reported in metadata as 72 ppi for resolution and reported in photoshop as 200 pixel/inch
They do BOTH mean pixels per inch right? If so, or really even if they don't how can I get the two reports to show the same resolution?
There are too many processes that depend on knowing res in advance of opening a file for that to be so far divergent.

Jingshu Li wrote:
Some JPG or Tiff with Camera raw settings will be opened in ACR firstly when you double click them. In ACR workflow option (the bottom in the ACR dialog) the resolution value isn’t same with that in Bridge (metadata panel). If you go ahead to open the image in PS by clicking ‘Open Image’ button in ACR dialog and then check the image size from Image -> Image Size in PS, the resolution will be same with ACR (actually it is changed by ACR).
If disable ACR support for JPG and Tiff in Bridge (Open Camera Raw Preferences in Bridge and choose ‘Disable JPEG support’ or ‘Disable TIFF support’ for ‘JPEG and TIFF Handling’), JPG or TIFF files will be opened by PS directly and the resolution matches between Bridge and PS. I believe this is an ACR bug.
So what file types are you using and if they’re opened by ACR firstly in your workflow?
The files are *.jpg. But I don't see where camera raw comes in. These are common jpg files. I'm opening them by double click in bridge.
Any way I did disable jpg and tiff in the Camera Raw preferences as you suggested. At Jpeg and tiff handling, both disabled. and restared bridge.
However, I see no improvment.
For example, a file reporting 72 ppi in bridge when opened in photoshop ... Images/size resolution reports 480 pixels/inch.
There is obviously some kind of miss handling that has been done to these files for them to have such a high resolution. I suspect they may have been handled at Walgreens or Walmart... or similar since I had something very similar happen to me once when I had a bunch of pictures developed at Walgreens and they cam back with resolutions like that, when I know the camera would have given them something way less.
But I don't see how any of that should be effecting Bridges inability to get the resolution right.
Here is another example: some.jpg
It appears that bridge is showing an unusually huge file size in inches, to account for the reported 72 ppi.
Bridge:
Size: ...............1.14mb
Dimensions:.....1496x1064
Dimensions in
inches ............20.8x26.7
Resolution: .....72 ppi
===========================
Photoshop:
pixels
Width 1496
height 2064
Document size
inches
width 4.987
height 6.88
Resolution 300
Do you have further suggestions?

How to make Barcode Size double.

Hi,
I need to print Barcode with double size to existing Size.
In SE71, in Character Formats, There is no Size Specification is there. Cient requirement is to make the Barcode Double.
We are using RSNUM Barcode. In SE73, SAP is not allowing to create a new barcode or change the existing Barcode.
How can we make the BARCODE size double. What are the prerequisites that needs to be considered.
Thanks & Regards
Sathish Kumar.

Hi
Sathish,
Do like below .
GO to Tcode SE73
Choose System Bar Code and press Change
Form the list choose your Barcode.
Double Click on it..Pop Up will show the existing Dimensions
Change them as per ur need ( Height and width will be available )
It needsTR ..Save
And job is done ,
Hope it Helps.
Praveen

How to make the size of VI and controls unchanged irrespective of the resolution?

Hi All,
I have made the exe of my labview application and when i was trying to run it on the users PC the window was almost distorted in the sense the multicolumn list box on the front panel was alligned only to a portion of the screen instead of the full screen.I changed by setting The window size's maintain proportions of window for different monitor resolutions.But still the multicolumn list box was still having problem.
Then i thought of including the next option"scale all the objects on the front panel as the window resizes" but that option was inactive.
I read somewhere to select the control and then from the edit option select "scale object with panel".Unfortunately i could not find such an option in my edit menu even after i selected edit menu after selecting multi column list box which i want to scale according to the front panel.
How do i go forward?
Pls give me some help
Thanks in advance

You can size the area of a control or indicator programmatically using the Size property node. I believe in some cases you can increase the font size of the text in the object to achieve the same result. Here's an example of increasing the size of a system combo box by 100 in both width and height:
Message Edited by Bill@NGC on 09-25-2007 07:04 PM
“A child of five could understand this. Send someone to fetch a child of five.”
― Groucho Marx
Attachments:
sizecombo.png ‏3 KB

How to make lot size dependent in Material master?

Hello Experts,
I created a Material master for a Finished product in Pharma industry and in work scheduling screen, under the section "In house production time in days", I see that "lot size independent". What change(s) in my settings in the Material Master can change it to "lot size dependent"?
Does any changes in the "Lot size data" section in the view "MRP1" have any effect on this field?
Also one more question:
Where is the Usage for BOM first specified? Is it in material Master or when creating a BOM?
Thank you.
Message was edited by: Visu Venkat

Hi Visu
No,Lot size data in MRP1 view will not have any effect in inhouse production time in work scheduling view.
You need to maintain the base qty in work scheduling in order to get the scheduling time for lot size dependant.
BOM useage is first specified only during BOM creation.
Suppose if u maintain the BOM useage in material master before creation of BOM, then still u can create a BOM with different useage. During these case, there will be always inconsistencies.
Hence Useage is always specified first during BOM creation.
Hope u r clear now.
Regards
Vijay

How to make the buttons same size on the toolbar

Hi All,
Can anyone please tell me how to make the size of buttons on the toolbar to be same .
And i also want to add combo box at the right side of my menubar with prefered size.
Please send me the solution if anyone knows . Thanks in advance.
Regards,
Shankar.

how to make the size of buttons on the toolbar to be same Create a panel with a GridLayout. Add the buttons to the panel then add the panel to the menubar.
add combo box at the right side of my menubar Read this section from the Swing tutorial on [url http://java.sun.com/docs/books/tutorial/uiswing/components/menu.html]How to Use Menu Bars for an example.

Is there any way to make Object size permanent in Pages?

Hi. Does anyone know how to make the size of an object permanent? I use a lot of clip art and after resizing it, I would like it to stay that size but each time I select an object, the size selection box always appears. This is mainly a problem for Pages for the iPad.
Appreciate any help

Only if you have used a character style to italicise the words. If you have that you can change one of the word to a chosen colour and all words with that style will get the new colour

Can someone tell me how to make my screen full size with Safari ? I am using a Mac osx 10.6.8.

Can someone tell me how to make my screen full size on my Mac OSX 10.6.8. using safari. I know this is a simple question. I have always had it on full screen and recently had it worked on remotely and now I can't get the screen back to full size. I appreciate any advise you can offer. Thank you

from the BetterTouchTool blog, older versions can be obtained using these links:
The last 64bit Snow Leopard (10.6 ) version (v 0.939 ) can be downloaded here
<http://bettertouchtool.net/btt0.939.zip>
If you are using an older 32bit Mac you’ll have to use this version: 0.785
<http://bettertouchtool.net/btt0.785.zip>

How to make a copy of a legal size document on HP Officejet Pro 8600

How to make a copy of a legal size doucment on HP Officejet Pro 8600 e-All-in-One?

Hi,
Please try
(a) Load legal size papers onto the input tray (you have to extent the tray from the blue/cyan part to fit legal size papers),
(b) Load original face up on the ADF,
(b) Touch copy,
(e) Touch Settings (now you can change size and few other options,
(f) Touch Black or Colors to copy.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to make free size in undotablespace

Similar Messages

Maybe you are looking for