How to make front panel-text visable but not selectable

Hi,
I am trying to overlay text over a LED (control) on my front panel. But now I can not control the LED status anymore because the text is now on the top layer and the LED control is not. I like it to be still visable, but I need to be able to select the underlying control. Is this possible?

Hi Remko,
why do you use a LED as control? It is meant to be an indicator…
Boolean controls also have boolean text - you need to make it visible in the control properties. Now you can write any text "over" your control without disabling it's usage!
@Potterton: Welcome to the forum!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Similar Messages

  • How to make front panel as Generic

    Hi all ,
    I need to know that how to do front panel reuse.
    Here i am using two front panel to do some work .
    But both the front panel do the same work ,
    I need to use create one front panel make them as generic .
    I C#  can able to do front panel generic .
    In labview how to do it .
    It helps me lot ..
    Thanks in advance .,
    Attachments:
    fp.vi ‏11 KB

    You can group the controls as a Cluster and make a type-def of it. That's probably what you're after.
    /Y
    LabVIEW 8.2 - 2014
    "Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
    G# - Free award winning reference based OOP for LV

  • X-fi XtremeGamer, front panel mic works but not r

    really weird problem I've got here. my mic doesn't work at all in the back ports in any of the 3 (since I wasn't really sure which port it was at first). the speakers work fine in the back but the mic only works in the front panel. any ideas?

    Silver_Rizla wrote:
    i had this problem, but have solved it
    i simply unplugged the front panel from the sound card, and then used the port on the back for my mic and it works fine, probably better than it did in the front panel
    hope it works for you
    are u kidding me? i have the same problem - mic on the rear - nothing works - forntpanel - everything is fine - but i bought the xtremegamer to use my frontpanel - and not to unplug it so the x-fi will work as it is supposed to...
    one more reason (beside the scp-thing) to bring this card back to my dealer...

  • How to make JTable editable by me but not by the user?

    Hi. I am doing an application to show data in a JTable.
    I need to update the data but do not want the user to change the data.
    Could somebody tell me how to do it?
    Thanks a lot!

    Yes, the above solution is clean. To add a little bit, if you donot want to have a JDialog to your application, just check for the password that is sent in an argument at the start of the application.
    java MyApp <password> // to be run by you
    java MyApp // to be run by user
    This would check the password and then sets the edit mode for the table. (But mind you, this can be done only at the start). If you want to determine the editing mode during the runtime, then you have to go for a login dialog. But, as far as I can imagine, you develop the application and will give it to the user. Is that correct?
    Thanks,
    Kalyan

  • Is there a way to make all screen text bold (but not necessarily) larger?

    My sweetheart can't see font well except for that which is very bold. Chasnging the SIZE of font is too cumbersome for him because it enlarges the entire page and means he has to scroll everywhere to see everything he wants to see. We can't seem to locate an option to just make all of the font on screen go bold, rather than larger...

    Only on web pages or also in the user interface?
    A possibility is to use code in [http://kb.mozillazine.org/UserChrome.css userChrome.css] below the @namespace line.
    See http://kb.mozillazine.org/Editing_configuration#How_to_edit_configuration_files
    <pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
    body, body * {font-weight: bold !important;}
    </nowiki></pre>
    You can also look at Stylish.
    Stylish: https://addons.mozilla.org/firefox/addon/2108
    NoSquint: https://addons.mozilla.org/firefox/addon/2592

  • The send button is greyed out when I try to text some but not all people from my iPod touch. Any ideas how I can fix this?

    The send buttin is greyed out when I try to text some but not all people from my iPod Touch. This happens even when they have iPhone 4s. Any ideas why and how I can fix this?

    This issue can be caused by the McAfee SiteAdvisor extension.
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

  • How to make a dynamic text  be SMS by fl2.1

    Now ,I know use " getURL("sms:"+telnumber) "to send sms to a
    specified no.,but how to make a dynamic text be the sms content.?
    Many thx!:

    Ciao,
    this should work:
    smstxt = "ciao, happy holidays";
    telnum = "1234567890";
    getURL("sms:"+telnum+"?body="+smstext);
    body is a keyword.
    Alessandro

  • How to make s:Panel middle in Flex4

    When I use <mx:Panel>,I find <mx:Panel> replaced by <s:Panel>.I can make <mx:Panel> middle by using following parameter:
    paddingTop="10"
    paddingLeft="10"
    layout="vertical"
    horizontalAlign="center"
    verticalAlign="middle"
    Then I use <s:Panel>,but I don't know how to make <s:Panel> middle both horizon and vertical. How to do it?
    Thanks.

    Please try:  horizontalCenter="0" in the s:Panel.

  • How to get front panel sou

    how to get front panel sound for me headphones, i have audigy 2 ZS.

    Works Great. Thanks
    !!! Although .... the gain on the front mic is very low compared to the rear mic jack. Instead of using the x0 pin plug for the mic, I configured/spliced the front mic wires into a (rear) pass through /8" jack lead. Now, the front panel mic is at full output. I lose the?rear mic input, but I'll never use it now that I have front panel input.

  • How to make separate/individual text frame from one parent frame in indesign with javascript

    Hi all,
    Please suugest - how to make separate/individual text frame from one parent frame in indesign with javascript.
    Thanks
    Rohit

    @Larry – ah, your interpretation could be the right one…
    May I rephrase the question:
    "How to split threaded text frames to single ones?"
    "SplitStory.jsx" or "BreakFrame.jsx" under Scripts/Samples indeed could be the answer.
    From the comments in the code of "BreakFrame.jsx":
    //Removes the selected text frame (or text frames) from the
    //story containing the text frame and removes the text contained
    //by the text frame from the story.
    //If you want to split *all* of the text fames in the story, use the
    //SplitStory.jsx script.
    Uwe

  • Do you know how to create Front Panel like Web,

    Do you know how to create Front Panel like Web, I mean like we pointed the word and click it will do another process instead by clicking push button.
    If possible, i can click the link in the table... Any idea anyone
    Solved!
    Go to Solution.

    Hi ezam,
    can you define more clearly exactly what you would actually like to do, and ill have a further look into it. I think smercurio_fc has understood it as I have, and is right with the activeX.
    any way, give a shout back with exactly what you want to do and we see what we can do,
    Richard
    Richard S
    Applications Engineer
    Certified LabVIEW Associate Developer
    National Instruments UK&Ireland

  • How to embed front panel in FP-2010

    hi
    1. is FP-2010 support "front panel embedding"?
    2. if yes then how?
    regards
    mazhar

    Hello Mazhar,
    Thank you for contacting National Instruments.  If I understand your
    question correctly you would like to know how to utilize front panel
    communication on a Fieldpoint 2010.  If you are just trying to view the
    Front Panel of your Fieldpoint VI on your development computer then you should
    be able to open up the front panel on the development computer and see it
    running.  However, if you are trying to communicate the information from
    the front panel to a non-development machine there are a few different
    methods.  Here is a knowledgebase
    article that explains some of the different methods that you can use. 
    Here is some more information about setting
    up a remote front panel for a Real-Time target executable that also may
    assist you.  Please let me know if you have any further questions or if it
    seems that I do not fully understand your question.  I hope this helps!
    Thanks!
    Bob H
    Applications Engineer
    National Instruments

  • How to make Dynamically Shortened Text With "Show More"

    Hi there! i want to know how to make dynamically shortened text with show more or read more in my website using HTML 5 pages  or ASP.NET ?
    example like these paragraphs 
    Lorem Ipsum är en utfyllnadstext från tryck- och förlagsindustrin. Lorem ipsum har varit standard ända sedan 1500-talet, när en okänd boksättare tog att antal bokstäver och blandade dem för att göra ett provexemplar av en bok. Lorem ipsum har inte bara överlevt fem århundraden, utan även övergången till elektronisk typografi utan större förändringar. Det blev allmänt känt på 1960-talet i samband med lanseringen av Letraset-ark med avsnitt av Lorem Ipsum, och senare med mjukvaror som Aldus PageMaker.
    Det är ett välkänt faktum att läsare distraheras av läsbar text på en sida när man skall studera layouten. Poängen med Lorem Ipsum är att det ger ett normalt ordflöde, till skillnad från "Text här, Text här", och ger intryck av att vara läsbar text. Många publiseringprogram och webbutvecklare använder Lorem Ipsum som test-text, och en sökning efter "Lorem Ipsum" avslöjar många webbsidor under uteckling. Olika versioner har dykt upp under åren, ibland av olyckshändelse, ibland med flit (mer eller mindre humoristiska).
    I motsättning till vad många tror, är inte Lorem Ipsum slumvisa ord. Det har sina rötter i ett stycke klassiskt litteratur på latin från 45 år före år 0, och är alltså över 2000 år gammalt. Richard McClintock, en professor i latin på Hampden-Sydney College i Virginia, översatte ett av de mer ovanliga orden, consectetur, från ett stycke Lorem Ipsum och fann dess ursprung genom att studera användningen av dessa ord i klassisk litteratur. Lorem Ipsum kommer från styckena 1.10.32 och 1.10.33 av "de Finibus Bonorum et Malorum" (Ytterligheterna av ont och gott) av Cicero, skriven 45 före år 0. Boken är en avhandling i teorier om etik, och var väldigt populär under renäsanssen. Den inledande meningen i Lorem Ipsum, "Lorem Ipsum dolor sit amet...", kommer från stycke 1.10.32.
    Den ursprungliga Lorem Ipsum-texten från 1500-talet är återgiven nedan för de intresserade. Styckena 1.10.32 och 1.10.33 från "de Finibus Bonorum et Malorum" av Cicero hittar du också i deras originala form, åtföljda av de engelska översättningarna av H. Rackham från 1914.

    Moved to the main Dreamweaver support forum.
    There are several ways you could approach this. Here's one you might try:
    Give the first paragraph an ID, such as "first", and wrap the paragraphs you want to hide in a <div> with another ID, such as "more". Then add the following block of JavaScript just before the closing </body> tag of the page:
    <script>
    var first = document.getElementById('first'),
         more = document.getElementById('more'),
         trigger = document.createElement('span');
    trigger.id = 'trigger';
    trigger.innerHTML = 'Show less';
    first.appendChild(trigger);
    function toggleDiv() {
      var state = more.className,
           text = trigger.innerHTML;
      more.className = (state == 'open') ? 'closed' : 'open';
      trigger.innerHTML = (text == 'Show more') ? 'Show less' : 'Show more';
    toggleDiv();
    if (trigger.addEventListener) {
        trigger.addEventListener('click', toggleDiv, false);
    } else if (trigger.attachEvent) {
      trigger.attachEvent('onclick', toggleDiv);
    } else {
      trigger.onclick = toggleDiv;
    </script>
    This gets references to the "first" paragraph and the "more" <div>. It also creates a <span> with the ID "trigger" that's appended to the "first" paragraph. The rest of the script defines a function called toggleDiv(), which toggles the "more" <div> open and closed, and changes the text in the "trigger" <span>.
    You also need to create the following style rules for the various elements:
    <style>
    #trigger {
        text-decoration: underline;
        color: blue;
        cursor: pointer;
    #more {
        transition: ease-out .7s;
        overflow: hidden;
    #more p:first-child {
        margin-top: 0;
    #more.closed {
        height: 0;
        -webkit-transform: translateY(-600px);
        transform: translateY(-600px);
    #more.open {
        -webkit-transform: translateY(0);
        transform: translateY(0);
        max-height: 600px;
    #more + p {
        margin-top: 0;
    </style>
    This solution hides the text and creates the "trigger" <span> only if JavaScript is enabled in the browser. It should work in all browsers, including Internet Explorer 8 and earlier.

  • Front panel audio jack is not working on K9N Neo V2

    My front panel audio jack is not working on K9N Neo V2. I check the JAUD1 cable and it appears to be connected to the front panel audio jack. My soundcard driver cannot detect any gadgets when I plug it in the front panel. My audio drivers and BIOS are up to date.  Is there any known solution to this? My computer is only a few months old and I have not tried the front audio jack until recently. I'm on Vista home premium btw.
    Also, I've got another problem, my processor is AMD 64x2 4400+ overclocked to 2.63Ghz. I've been using that clock value ever since I built this computer and stress tested the processor and found that it would not cause any problems like hanging or overheating. However, I recently decided the need for AMD's Cool & Quiet technology and enabled it. It caused BSODs every few days or per week that didn't happen before. I tried it with the default clock value and it still causes BSODs. Can someone help me?

    Quote
    Thanks. Its ironic that disabling it actually enables it.
    It has to day with the front panel audio wiring of your case.  How many wires are there that can be connected to the board's pin header?
    Quote
    Sound quality isn't very good
    Can you be more descriptive?  Is the quality better if you plug the headphone into one of the jack at the back panel?  (Also, make sure you tell the Realtek HD Audio Manager, that a headphone is connected (and not regular speakers).

  • How to make sure that schema name is not included with generated sqls

    How to make sure that schema name is not included with generated sqls with tableadapter wizard.
    What should I use? Oledb, ODT.NET, where can set that I want "pure" sqls, not schemas, not ", or anything like this
    I want
    "Select a,b from t1" ,not "select "a","b" from schema.t1"
    Also schema name is put in all parameters, all over the place... What if schema name changes. (b1test to b1prod)
    . I now manually edit XML files of dataset. It works but....
    thanks

    The full hardware :
    Processor Intel core due 3.00 MHz
    RAM:1.5GB
    psu:650 Watt (but i baught i cheap one so it may be actually about 400 watt)
    HD Disk:160 GB
    But about the power supply if it not able to run the VGA card ,Is it will not show any screen or it will not able to run the computer??

Maybe you are looking for