How to make full system restore disk in Windows 8

http://www.techrepublic.com/blog/window-on-windows/restore-windows-8-with-system-image-recovery/7464
And its called Windows 7 File Recovery?
But finally found way to make the good old fashion restore disks.

Hello Jay,
The current forum is for developers. I'd suggest asking non-programming questions on the
Office 2013 and Office 365 ProPlus - IT Pro General Discussions forum instead.

Similar Messages

HT4528 My iPhone 4s would not sync - it kept canceling. I backed it up and did a full system restore. Now it won't restore my apps. It starts on 1 of 51 and then tells me it's canceling sync and it stops. My apps are all black. How do I fix this?

My iPhone 4S kept canceling while syncing. In the Apple support communities, it was recommended that I do a full system restore. I backed the phone up and did the restore. Now it won't finish the restore process. It gets to where it will restore the apps and it says "copying 1 of 51", and then it cancels the sync. I have no apps on the phone - they are all black and they say "waiting". How do I get the apps reloaded on the phone? Do I have to delete them all and redownload them? I'm not even sure that will work. Do I go to Verizon and ask if they can fix it? Any suggestions?

robsta_1980 wrote:
...- no laptop, no desktop, just my iPhone! How can I get my songs back?
Download Past Purchases
http://support.apple.com/kb/HT2519

How can one do a full system restore from Time Machine to a Macbook Air

I recently had a major crash on my two internal disc DualG5. The system internal disk failed completely and I used Time Machine to do a full system restore to the second internal disc. It worked PERFECTLY!! I followed the instructions in support
http://docs.info.apple.com/article.html?path=Mac/10.5/en/15638.html
This involved inserting the Leopard DVD into the optical drive and backing up from my external LaCie time machine backup.
I also have a MacBook Air. I use an external USB HD drive as Time Machine backup. The Air only has one USB port. I have an external DVD drive for the Air. Clearly, I will not be able to mount the DVD and External disk at the same time unless I use a small hub. I guess this will work but is there any other work around. Could I do a full reinstall and then connect the external HD?

Richard,
Alternatively, you could use Remote Disc Sharing (via the DualG5) to do the install and reserve the USB port for the Time Machine disk.
[http://support.apple.com/kb/HT1131]
[http://support.apple.com/kb/HT1777]
Let us know if this was helpful.
Cheers!

I lost my iphoto application how i can restore it? i am not having system restore disk. how i can get my photos back?

i lost my iphoto application how i can restore it? i am not having system restore disk. how i can get my photos back?

If the iPhoto application is no longer on your hard drive (do a search to be sure it didn't just get moved to an unexpected place), there's no way to get it back without either backups or a copy of iPhoto. Your original disks that shipped with the machine would have iPhoto. If you have lost those disks and don't have backups, you'll simply have to buy a copy of iLife. Or call Apple with your machine's serial number in-hand and request replacement disks, which they will send you for a small fee.

How do I do a full system restore on an iPad 2?

I want to prepare my ipad 2 to sell so I can upgrade to a 64gb model.
How do I do a full system restore to factory settings?

Follow the instructions in the restoring topic of the following.
iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software

If I do a full system restore on my MBP will i get ilife off of the boot disks that came with the computer?

If I do a full system restore on my MBP will i get ilife off of the boot disks that came with the computer.
Hi on my MBP i am going to restore it.
It came with iLife will this be on the boot disks?
Thanks

If your computer shipped with Snow Leopard, that means it shipped with two disks: an Install disk that contains the OS, and an applications disk that contains the iLife suite. You would use the applications disk to reinstall iLife.

Cannot run Disk Manager in Full System Restore

Hi,
I'm trying to do a full client restore of Windows 8.1 with my Windows Server 2012 R2 Essentials (all Windows Updates installed on server), but on the screen where I select source and destination volume, and I click on "Run Disk Manager", I get
error "Cannot load Microsoft Management Console". Same error occurs whether I start the Full System Restore via network over Client Restore Service, or via USB stick.
I can think of a workaround to this, but I've used this earlier in previous Essentials/WHS versions and it has worked flawlessly, so I'm wondering if this is some regression in 2012 R2?
UPDATE: For anyone wondering, the workaround for this was to boot with normal Windows ISO, go to Advanced settings -> Command prompt, and set up the volume using
diskpart tool. Then going back to Full System Restore, and you can just select the correctly initialized target volume.
Any comments?

Hi,
Few days ago system got in a weird state and had to do a full restore. Enabled network boot from BIOS, connected to Windows Server, chose disks (only restore BIG_SSD, i.e., C:) just normally without need to go to Disk Manager, as backup matched current drive.
Perhaps the original issue was due to boot partition being on the secondary drive for some reason (drive D:), but I'm not sure if it was indeed the case.
I have seen it before as well, that restores in Essentials don't work properly if you've chosen only to backup drive C:, but for some reason drive D: is the booting disk (although Windows is on C:). Why has it ended up like that, I don't know, but nowadays
I always install Windows with just one hard drive connected especially if I want to get reliable backups to Essentials.
Thank you everyone for feedback, will mark it as solved, although we perhaps got more questions than answers :)

Network Error in Client Full System Restore

Hi,
I've been attempting, as a test, to restore a full system backup to a client computer using a boot flash drive. When I attempt to do so, I get a "Unknown Network Error" at the point where the client has attempted to contact the server, been unable
to and offered the opportunity to enter a name or an IP address. When I enter either one, I immediately get an "Unknown Network Error". There's no error number or other specific identifying informations.
Details:
The client computer is a UEFI motherboard PC running Windows 7 Professional. It connects with no difficulty whatsoever on a normal basis to the Windows 2012 R2 Essentials server. It gets backed up every night by the server over the network with no problem.
When I boot from the Network Client Computer Restore USB key, everything works fine except that it is unable to find network drivers. When given the chance to load missing drivers, I use the "Drivers for Full System Restore (from the full system backup)"
on another USB key and they are found just fine.
Then when we get to the point of searching for the server, it appears to look for 30 seconds or so, then a dialog comes up asking whether to search again or if I want to enter a IP or name. Searching again doesn't yield results, and when either an IP or
the server name is entered, I get the "Unknown Network Error".
I feel certain there must be some logging that is either available or could be turned on if I knew how. I feel concerned that I would not be able to restore my client computer if something were to happen. Any ideas would be greatly appreciated.
Jeff

Hi Justin,
Thanks for your response. I'm sorry that I didn't see it sooner - I guess I assumed I'd get an email if there was a response...
Anyway, at the time when the error occurs, the OS is not running. We have just booted via PXE over the network and started the "Full System Restore" Wizard, so it is not possible to "ping" the server. However, the fact that we successfully
booted via PXEs tells me that basic connectivity exists to the server, because otherwise the PXE boot wouldn't work.
Thanks for the pointer to the logs - I'll check them.
What I have done since I last updated was to do a few experiments. I added a Windows 7 boot image and install image with the Windows Distribution Service, so that on PXE boot I'm given 2 options - a Full System Restore and a Software Install.
I also roped another PC into service, one that is running from BIOS rather than UEFI. On that PC, both the System Restore and Software Install via PXE boot work fine. This tells me the server is at least nominally working, and that the problem is related
somehow to the specifics of the PC being connected. Could be server setup still, could be something on the PC.
On the computer with the UEFI, neither Full System Restore nor Software Install works. However, there is at least a clue in the error response from the Windows Setup - I get a lengthy error message that essentially says that \Windows\Boot\EFI\bootmgr.EFI
is corrupted. I'm not clear whether at this point we are referring to a file extant on the PC or one that is being downloaded that's being claimed to be corrupted.
This took me down a path in which, to eliminate variables, I changed the boot drive on the UEFI system from MBR to GPT. No joy. Also broke up my mirrored drive and changed the SATA from RAID back to AHCI. Also no joy. But everything I am reading is leading
me to believe that the problem has to do with the fact that my target PC has a UEFI BIOS. I continue to investigate - and will look through the logs you mention.
Jeff
Update 8/24/2014
Made some progress yesterday. I'm now able to use Windows Deployment Service to deploy Windows 7 over the network to the UEFI computer. I had to do two things to get that to work.
Turn off driver signing in the UEFI bios. That got me past the error screen complaining about a corrupted driver (which I'm pretty sure I don't have). But then it got hung up saying it couldn't find a driver for the network.
To fix that, I added the driver package to the boot image using the tools in the Windows Deployment Service applet.
After that, it found the server just fine, allowed me to authenticate, and would have proceeded to install Windows 7 if I hadn't aborted.
I then added the exact same driver package to the Full System Restore boot image, but it made absolutely no difference. Exactly the same symptoms as reported previously.
So, where am I and what do I know?
I can do both a Remote Windows 7 install and Client Full System Restore using Windows Deployment Services on an X64, BIOS based computer.
I can do a Remote Windows 7 install to my X64 UEFI based computer.
When I attempt a Client Full Restore to the X64 UEFI computer, I get all the way to the Full System Restore Wizard, which tells me that it can't find network drivers (even when they've been installed to the boot image). It finds network drivers when provided
via a USB key, but then when the Wizard looks for the server, it's unable to find it. When a manual option is presented, and I enter the server's IP address, I get an "Unknown Network Error" popup message, and I can't proceed further.
On the UEFI computer, I've tried all combinations of Compatibility Support Module (CSM) settings, but they make absolutely no difference to the Full System Restore process.
I've also tried converting the boot disk from MBR to GPT, didn't make any difference.
I "unmirrored" my mirrored RAID drives and changed the SATA bios from RAID to AHCI. Made no difference.
So, at this point I'm kind of stuck. I'm out of ideas for things to try for now. I did look at the logs as suggested, but didn't see much of anything relative to WDS. Possibly logging has to get turned on?
As always, any help or ideas would be much appreciated.
Jeff

Question Regarding A Full System Restore...

My MacBook is just over a year old and I'm noticing some odd behaviors of late. More beach balls and jumping cursors when typing emails etc. ( The cursor issue is irritating... I'll be typing and suddenly the entire message will delete, or the cursor will jump to another area within the email and I don't realize it... as I'm typing it's inserted in the middle of something I've already typed.)
I was wondering if I should do a full system restore? This is my first Mac, so my only experience doing a system restore back to the factory settings has been with a Microsoft PC and THAT is a pain. I do regular SuperDuper and Time Machine backups on my MacBook, but if I do a system restore and THEN do a restore from my SuperDuper or Time Machine won't that just put back onto my MacBook whatever is causing the beach balls and cursor issues? I would prefer to not have to do a full system restore and then reinstall individually all of my current applications as well as reconfigure my Airport Extreme/ Express and Apple TV etc.
Does anyone have any thoughts or suggestions?
Thanks !
Chuck

Hi - there's a few things i would do first if you haven;t done them already of i were you. Firstly, check your disk permissions in disk utility - go to spotlight and type in disk utility - click on the application and then in the right hand pane select you macintosh hd - once you've selected that go to the bottom middle of the whole pane where it says repair disk permissions - this can sometimes help rectify any cranky issues you have.
You can also fix your preferences - this site tells you how along with some other useful tips on sorting out system problems:
http://www.macattorney.com/ts.html
Another thing to try is to run your routine maintenance scripts - your machine will run these automatically but only if your machine is on in the early hours of the morning! I've heard that under Leopard if your machine is not on the scripts will run as soon as they can after missing the scheduled time but i've no evidence of this in my Console logs. Anyway, manually running them is easy - there are daily, weekly and monthly scripts. To run them all at once:
open the terminal application from spotlight
at the command prompt type:
sudo periodic daily weekly monthly
press return and it may ask you for your system password. type that in and press return
it will take a few minutes to run these scripts.
you may also need to clean out your caches as per the detail in the article listed above. you can get software that performs these tasks for you e.g. macjanitor, onyx, maccleanse etc
and if you do have to reinstall, i'd go for the fresh install - yes it is a bit time consuming but it loads and loads quicker than windows! make sure you back up your important data first.
all the best!

Can I do a full system restore of a 10.5 system by booting on a 10.6 CD?

Dear all,
I am trying to support my parents whos MacBook just failed (harddisk dead). They have now gotten a new harddisk installed and wants to restore the setup from their TimeCapsule.
I would prefer to do a full system restore, so that it gets back to exatly how they had it before. A 'user only' setup would require them to reinstall all third party apps including MS Office etc., which will be tricky for them.
Few questions:
1. Does a 'full system restore' restore everything, including applications and system files? Will it be going back to an exact clone of what they had?
2. They ran a Mac OS 10.5.x system, but cannot find their installation CD. Can I lend them my Mac OS X 10.6 (Snow Leopard) CD to boot, while still restoring their 10.5.x system? (I don't want them to have 10.6 as I am not sure about compability with all their 3rd party software/drivers etc.)
3. Any other things I should keep in mind for a successful restore?
Thanks,
Magnus

Magnus Olsson wrote:
2. They ran a Mac OS 10.5.x system, but cannot find their installation CD. Can I lend them my Mac OS X 10.6 (Snow Leopard) CD to boot, while still restoring their 10.5.x system?
No. Well, you can do the restore, but it won't boot.
You need a Leopard disc. It can be the original that came with their Mac, or a Retail (black) version, and it doesn't matter what version of Leopard it is, since you don't load OSX but only use the Installer utility. Thus borrowing one doesn't violate the license.
They really should have a Leopard disc, not only to do a restore, but also if they need to do a +*Repair Disk+* on the internal HD. And they would need the original disc, for the Apple Hardware Test on it; AppleCare will send them a replacement for a nominal fee.
3. Any other things I should keep in mind for a successful restore?
Yes. See #14 in the Frequently Asked Questions *User Tip,* also at the top of the +Time Machine+ forum, for detailed instructions. Note the caution there, under the green box, about turning TM off immediately after the restore.

Hey I'm a novice on computers, but i've just done a full system restore on my laptop after backing it up on an external hard-drive long story short in the back up process all my itunes converted to mpeg4 files and now i can't get them back into my my libr

Hey I'm a novice on computers but i've just done a full system restore on my laptop and put it back to factory spec, obviously i backed up all the data on an external hard-drive but when i have re-installed itunes and gone to import all my old music files from my previous itunes library as mpeg4 files it keeps telling me i don't have permission??!! *** someone please explain or tell me how to get music on to my new itunes without having to re-import every cd i own which is alot!!!

Other than iMovie, GB always incorporates the audio files into the GB package. So just save or move the GB project to the external drive, and you're done - anything you import, edit or record will be saved to the external drive.

I have lost my toolbar and task bar. I have tried all the sugestions on this site to no avail. I don't know how to try a system restore with out them.

I was enlarging pictures on Facebook to full screen. When i went to move on. All my tool bars and my task bar have disappeared. I have tried all the suggestions on this site to no avail. I don't know how to do a system restore without my task bar, and don't want to lose my book marks. Please help, i can't grt to my important favorite sites.

Can you launch a new window (Ctrl+n for a normal window, Ctrl+Shift+p for a private window) that has the usual complement of toolbars? If a new window also is missing bars, try using the View menu > Toolbars list to restore them. If the classic menu bar is not displayed, usually tapping the Alt key or the F10 key will show it temporarily.

Ho do i restore my files from time machine after a full system restore?

I have just had a full system restore on my MAC, thanks to the genious bar in Bondi, prior to doing this i backed everything on my external hard drive using time machine, i now want to put everything back on to my MAC, including emails, music, photos, movies and important docs etc. what is the best way to do this?
cheers Colin,

See Here > How do I restore my entire system?
From Here > http://pondini.org/TM/FAQ.html
More Info Here > http://pondini.org/TM/Troubleshooting.html

Unable to boot after Time Machine full system restore!!

I was having some serious slowdowns with my computer. I did multiple RAM and HD hardware tests, everything seemed to be working fine. I had recently deleted a bunch of files in order to free up some HD space, so I thought that may be the culprit. So I did a Time Machine backup and restored the Powerbook to it's original 10.3 software. All was fine. Then I upgraded back to 10.5 and all was fine. Then I did a Time Machine full system restore overnight and got the message "Your restore was successful, you must now restart your computer" (or something to that effect). Now I get the start-up chime and startup screen (apple logo) but then the computer shuts itself down. I have reset the PMU and PRAM to no effect. I have tried booting up in safe made, also no dice. I have tried starting it up with the time machine HD attached - doesn't help. I guess I'll need to hit the genius bar but wanted to ask the friendly discussion forum folks first. thanks in advance.

Hi coldengray
Did you try to start from your System-CD? Hold down C-key during startup, start DiskUtility from the menu and verify/repair disk and permissions there.
If the CD is not available you can also connect your TimeMachine-Disk, select it as startup volume in System Preferences/StartupDisk, restart and then run DiskUtility from folder Applications/Utilities
Good luck P

Installing iDVD from a system restore disk

Hello all-
I posted a question elsewhere looking at this problem from another angle, but I think this might be the way I want to go about it, if I can.
To make a long story short (or at least try): I just bought a six-month-old Power Mac G5 on eBay. I am planning on moving all my apps and data over from my old computer, a G4. The system restore disks came will put OS 10.3.5 on the G5. The G5 has a built-in DVD burner, and thus also came with iDVD. The G4 does not have a DVD burner, and thus did not come with iDVD.
I have a commercial version of OS X 10.4, and what I'd ideally like to do is make a totally fresh and clean install of 10.4 onto the G5, and then use the setup assistant to import all my stuff from the G4 over. However, my fear would be that in doing so I would lose iDVD. Is there any way to install iDVD from the install disks that come with the G5 without installing OS X?
Thanks in advance,
jf

Put your install disc inside your PC and right click and choose Show Package Contents on the main installer - then have a look in the sub folders for the iDVD package - it should be in there - this should work again once you re-install your machine.

How to make full system restore disk in Windows 8

Similar Messages

Maybe you are looking for