How to make hard reset on laserjet pro mfp m125rnw

Hi, All
I need some help. Cause of my ugly hands I install chineese language on my printer How can i make the hard reset to reset the language settings?
Thanks
This question was solved.
View Solution.

Also you may want to try.
Turn off the device.
Press and hold the Copy+ Cancel (X) button, keep the quadrant depressed as you turn the product on.
When the ‘Permanent Storage Init.’ Message appears on the display, release the button.
Super NVRAM Initialize
Turn off the device.
Press and hold the Right+ Cancel (X) button, keep the quadrant depressed as you turn the product on.
When the ‘Permanent Storage Init.’ Message appears on the display, release the button.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Similar Messages

How to enable WebScan feature in LaserJet Pro MFP M126nw Printer

I have installed a new LaserJet Pro MFP M126nw printer with wireless configured. The IP Address is 192.168.0.21. I visit http://192.168.0.21 through browser. I don't see Print/Copy/WebScan options there. I can see rest of the configuration tabs.
I am interested in WebScan feature to scan document from my Chromebook. Please let me know how to enable this.

Hi,
The Webscan feature is not available on laser printers, it is only available on Inkjet printers.
I afraid you can only print from a Chromebook, scanning to a such is not supported with the HP Laserjet Pro MFP M126 printer.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How to make hard reset on Toshiba Journ.E Touch?

How to reset hard the Toshiba journ e touch?
Thanks

The only way I have managed to recover completely, which appears to be equivalent to a hard-reset.
Apply (or re-apply) the firmware update using SD card. Make sure to get the correct file that corresponds to your device. (mine is PX1530U-1ET1)
be aware that any previously used SD card needs to be formatted by a Windows PC to be totally successful.
I had problems getting the card recognised by the journe until I did a complete reformat of the card. (using quick format isn't thorough enough).
1. back up your data
2. put firmware onto card using a Windows PC
3. plug the charger into Journe touch
4. slide reset switch to left and back to the right. (with a paper clip)
5. insert your firmware SD card
6. power up and the Updating message should pop up.
It usually takes a couple of minutes to get things back to usable.
power off and remove the SD card. (keep it safe for future problem resolution)

HP Laserjet Pro MFP M127fn - How to turn off T.30 Trace Reports

After every fax received the unit prints a "T.30 Trace" report. Needless to say, this is a big waste of paper. Have gone into the Reports setup and changed the settings accordingly, but am still getting this report after every fax we receive. We are using the unit as a fax machine/copier only, so it's only connected to a phone line and power source. How can I turn off these unwanted reports? Thanks for any assistance you can give.

Hi @mrinn ,
I see that you are having issues with the T.30 Trace Reports printing, you have already turned off the setting and the printer is still printing them off. I would like to help you out with this issue today.
Just double check the setting, to make sure it is still turned off.
Go to Setup, Service, T.30 Trace.
You could update the printer's firmware, but the printer would have to be setup on a computer to do this.
HP LaserJet Pro MFP M127fn Drivers.
Select your operating system, click next, click the link for firmware.
I can send you a reset for the printer in a private message. But it will set the printer back to factory settings and clear out the phone book. In the forum beside your handle name just click on the envelope to view it.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Color LaserJet Pro MFP M177fw How to Scan

I just bout the HP Color LaserJet Pro MFP M177fw printer today and don't know how to use the scanner. I use Windows 8 operating system. Please advise how to use th scanner function. Thanks.

Hi, From page #38 of the manual: Scan by using the HP Scan software (Windows)
Use the HP Scan software to initiate scanning from software on your computer. You can save the scanned image as a file or send it to another software application.
1. Load the document on the scanner glass according to the indicators on the product.
NOTE: For best results, load small-size paper (Letter, A4, or smaller) with the long edge of the paper along the left side of the scanner glass.
2. Click Start, and then click Programs (or All Programs in Windows XP).
3. Click HP, and then select your product.
4. Click HP Scan, select a scanning shortcut, and then adjust the settings if necessary.
5. Click Scan.
NOTE: Click Advanced Settings to gain access to more options.
Click Create New Shortcut to create a customized set of settings and save it in the list of shortcuts. Regards.

How to make a RESET button in labview ?

how to make a RESET button in labview which resets all the elements in an array back to inactive element. Rather than deleting values in every column of array its better to create a RESET button ... how to make it ???

abhinavb wrote:
how to make a RESET button in labview which resets all the elements in an array back to inactive element. Rather than deleting values in every column of array its better to create a RESET button ... how to make it ???
You seem to have some misconceptions.
Is the array a control or an indicator or just some data held in a shift register or feedback node?
What you are probably looking for is an empty array. An empty array has a size of zero and has no elements (active or inactive). From your mentioning of "rows", you seem to have a 2D array.
The size of the array is independent of the visible size of the container.
Clearing an array means simply writing an empty array of the same datatype to it's terminal (or internal data structure). If the array is a control, you need to write to a local variable of it instead.
Can you show us some code so we can have a better understanding what exactly you mean by "array" in this context? Thanks!
LabVIEW Champion . Do more with less code and in less time .

How to lock the Printer of LaserJet Pro 500 Color MFP m570dw

how to lock the Printer of LaserJet Pro 500 Color MFP m570dw

You can set a control panel lock security level and password for your HP LaserJet series printer. To lock your printer, follow below link:
http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-bpl03612

How to scan on Mac OS10.10.2 by HP Color LaserJet Pro MFP M177fw?

hello,
i try few different way but still don't know how to scan things.
anyone know how to scan on Mac OS10.10.2 by HP Color LaserJet Pro MFP M177fw?
it have no problem on printing by wifi.
thanks,
Les

Hi Les,
Follow these steps to scan with the HP Scan software:
http://support.hp.com/us-en/product/HP-Color-LaserJet-Pro-M170-Multifunction-Printer-series/5303438/...
If you do not have the HP Scan Software located as the socument states, download and install the following software.
Be sure to seect HP Scan while installing the software:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=kj-124923-3&cc=us&dlc=en&lc=en...
Additionally you may scan with Apple's software by following these steps instead:
http://support.hp.com/us-en/product/HP-Color-LaserJet-Pro-M170-Multifunction-Printer-series/5303438/...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How to print fax call log on hp laserjet pro mfp m375

There should be a way to print fax call log on hp laserjet pro mfp m375. Not sure whether to go in "tools", "fax", "settings" or what! Can somebody please give me instructions ASAP. Does anybody else find HP's tech support - if your warranty runs out - to be terribly POOR. I've been trying to get an answer to this question for about an hour which I think HP should at least answer simple questions in hopes that the customer will want to continue buying HP products of which they will purchase warranty plans. So my next question is > are we supposed to keep a tech support plan on a product for as long as it's in service - 5 years or longer??? The 1st question is VERY important to me if someone would please answer. The 2nd comment/question is more directed to HP!!! :-) Thank you very much!
NEVERMIND!!! I finally found the answer to my fax question and got it to print. As for how long HP expects a customer to pay for warranty plans and why they don't answer SIMPLE questions without them, please answer if you are a representative of HP b/c I'm really disheartened with your service. Thank you.

Hi,
You may print the Fax Activity Log report by following the steps listed under the Print individual fax reports section below:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?sp4ts.oid=4337652&spf...
Phone or Chat support are available within the product warranty period or can be extended with a Care Pack or a Service Agreement, the HP websire and the forums are available for out of warranty users.
You may find amy avaialble support method listed below:
http://h20566.www2.hp.com/portal/site/hpsc/public/help/contactHP/home/?ac.admitted=1404750921744.876...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How do i reset my mac completely? I have parental controls and cant seem to get to time machine cause i bought the computer with parental controls on it and they did not have the password. How do i completely reset my macbook pro?

how do i reset my mac completely? I have parental controls and cant seem to get to time machine cause i bought the computer with parental controls on it and they did not have the password. How do i completely reset my macbook pro?

If you have a rescue email address (which is not the same thing as an alternate email address) on your account then the steps on this page will give you a reset link on your account : http://support.apple.com/kb/HT6170
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps on this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5620
Or, if it's available in your country, you could change to 2-step verification : http://support.apple.com/kb/HT5570

How to replace hard drive in macbook pro?

How to replace hard drive in macbook pro?

Hi S,
If you have the newer unibody style, it's very easy. If it's one of the earlier models, it's considerably more difficult. Go to Apple Menu > About This Mac > More Info > Hardware and find your Model Identifier. Then go to ifixit.com, or powerbookmedic.com or macsales.com or youtube or others and there are illustrated, detailed directions. Good luck to you and post back if you have further questions.

HT4113 how do you hard reset 2nd gen with out pass code?

how do you hard reset a ipad with out the password

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.

How to make mirror image on officejet pro 8600

how to make mirror image on officejet pro 8600

Hi,
You can not make mirror images with printers but you can print mirror images on printers. This is how to print mirror images on a normal printer:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=bpu02032&lc=en&product=61561
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP Color LaserJet Pro MFP M177fw screen frozen on hp logo and energy star icon

My HP Color LaserJet Pro MFP M177fw screen is frozen on hp logo and energy star icon. It has only printed the test page, and will not print otherwise. I have tried unplugging for 60 seconds, and even uninstalled it and reinstalled it with the latest download - still no change. None of the other icons outside the screen work either (home, help, etc.) about all i can do is turn it off and on. Also, I obviously cannot make copies etc since I cannot access any of the functions. Please help! and thanks in advance!

Hi , I read your post and see that the printer is frozen on the HP Logo and Energy Star Icon. I would really like to be able to help you resolve this issue.
I have provided some steps to try to see if we can resolve this issue. Disconnect the USB/Network/FAX and power the printer on Standalone. Check and remove any packaging material inside the printer and toner. Do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation. If the issue persists, perform a power drain by disconnecting the power cord from the back of the printer and keeping the power button pressed for 30 seconds and in case of a power switch keep the switch in ON position for 30 seconds before reconnecting the power chord. Update the printer's firmware, make sure you run this through a USB connection. It may not detect the printer in this error state though. Software and Drivers. Select Option 2 and wait for the page to load and then select the link for firmware. I can send a private message with some another step to try.
In the forum beside your handle name just click on the envelope to view it. How is the printer connected? (USB/Ethernet/Wireless) Please let me know the outcome. Have a nice day!
Thank You.

HP Laserjet Pro MFP M12fn, printing a solid black line on every paper

I'm running windows 7 professional. I haven't received any error messages and nothing out of the oridarny has happened. My printer/scanner/fax/copy (My HP Laserjet Pro MFP M12fn, product # CZ181A) is printing with a black line down the entire paper, but its only doing it thru the feeder and not on the glass. HELP, How can I fix this?

Welcome to the HP Forums angelinaOO7,
I read your post, which indicates that you are getting a black line down the page when using the feeder. You can print fine from the glass. I can help you with this.
I would do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
Clean the scanning glass and platen.
Turn the printer off.
Disconnect the power cord from the product and the wall outlet.
Open the scanner lid.
Clean the following scanner areas with a soft cloth or sponge that has been moistened with nonabrasive glass cleaner.
Main scanner glass.
Small scanner glass to the left of the main scanner glass.
White plastic backing.
Dry the glass and white plastic backing with a chamois or a cellulose sponge to prevent spotting.
Plug the power cord into the product and the wall outlet.
Turn the printer on.
Try to make another copy.
If you are still having issues, then update the printer's firmware.
HP LaserJet Pro MFP M127fn Drivers.
Select your operating system, click next, click the link for firmware.
If you need further assistance, let me know.
Have a wonderful day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How to make hard reset on laserjet pro mfp m125rnw

Similar Messages

Maybe you are looking for