How to make hard reset on Toshiba Journ.E Touch?

How to reset hard the Toshiba journ e touch?
Thanks

The only way I have managed to recover completely, which appears to be equivalent to a hard-reset.
Apply (or re-apply) the firmware update using SD card. Make sure to get the correct file that corresponds to your device. (mine is PX1530U-1ET1)
be aware that any previously used SD card needs to be formatted by a Windows PC to be totally successful.
I had problems getting the card recognised by the journe until I did a complete reformat of the card. (using quick format isn't thorough enough).
1. back up your data
2. put firmware onto card using a Windows PC
3. plug the charger into Journe touch
4. slide reset switch to left and back to the right. (with a paper clip)
5. insert your firmware SD card
6. power up and the Updating message should pop up.
It usually takes a couple of minutes to get things back to usable.
power off and remove the SD card. (keep it safe for future problem resolution)

Similar Messages

How to make hard reset on laserjet pro mfp m125rnw

Hi, All
I need some help. Cause of my ugly hands I install chineese language on my printer How can i make the hard reset to reset the language settings?
Thanks
This question was solved.
View Solution.

Also you may want to try.
Turn off the device.
Press and hold the Copy+ Cancel (X) button, keep the quadrant depressed as you turn the product on.
When the ‘Permanent Storage Init.’ Message appears on the display, release the button.
Super NVRAM Initialize
Turn off the device.
Press and hold the Right+ Cancel (X) button, keep the quadrant depressed as you turn the product on.
When the ‘Permanent Storage Init.’ Message appears on the display, release the button.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

How to make a RESET button in labview ?

how to make a RESET button in labview which resets all the elements in an array back to inactive element. Rather than deleting values in every column of array its better to create a RESET button ... how to make it ???

abhinavb wrote:
how to make a RESET button in labview which resets all the elements in an array back to inactive element. Rather than deleting values in every column of array its better to create a RESET button ... how to make it ???
You seem to have some misconceptions.
Is the array a control or an indicator or just some data held in a shift register or feedback node?
What you are probably looking for is an empty array. An empty array has a size of zero and has no elements (active or inactive). From your mentioning of "rows", you seem to have a 2D array.
The size of the array is independent of the visible size of the container.
Clearing an array means simply writing an empty array of the same datatype to it's terminal (or internal data structure). If the array is a control, you need to write to a local variable of it instead.
Can you show us some code so we can have a better understanding what exactly you mean by "array" in this context? Thanks!
LabVIEW Champion . Do more with less code and in less time .

HT4113 how do you hard reset 2nd gen with out pass code?

how do you hard reset a ipad with out the password

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.

Toshiba Journ E touch Account Reset!

_Hello good day_
Can you reset my account because I was not in the *Toshiba Virtual Store*
_'m logged_
_not registered_
* I have the Toshiba
Journ e Touch gift from a friend
and does not know his password or his e-mail
*Personal Account 29 122*
ask for quick reset

Thank you for the request.
Your Toshiba Virtual Store account has been reset.

Is Toshiba Journ.e Touch compatible with Adobe Digital Editions?

Greetings from Barcelona!
I have problems to authorize my Toshiba Journ.e Touch. Adobe Digital Editions recognizes the device, but there is no way to authorize it, there is no option for this.
Thus I cannot transfer my ebooks from my computer to the Toshiba. At the Adobe Forum it seems that other users had the same problem. I cannot transfer my ebooks from my computer to the Toshiba Device.
Does anybody know what is wrong or how to solve this?
Thanks so much!
Cristina

Hello cristinadeseras,
unfortunately, it is not possible to use the "Adobe Digital Editions" on the JournE Touch.
The system requirements of the JournE Touch are not enough for this program.
best regards

Is it possible to install Android on Toshiba Journ.E touch?

Is it possible to install android on Toshiba Journ.E?
If so, what and how?
+Message was edited: content has been translated+

No, as far as I know this is not possible.
Toshiba Journ.E touch uses the Windows CE system.

All-In-One C4780 screen is stuck on a loop. How can I hard reset the printer?

I have a C4780 and am running Windows 7. I have had the printer for 2 years and never had a problem until recently. I have been unable to print for months because the touch screen on the printer is stuck in a loop. I first noticed the problem because I could hear random beeping and printer movement from the other room. It was doing it all on it's own. There were no changes to the computers, wireless or anything. I had just used it 2 weeks prior to print a passport photo and it worked fine.
It thinks I am trying to print from a memory card and asks me to insert the card. Then it thinks I am trying to print a passport photo. Then it thinks I am scanning and asks me to place the photo face down. (etc, etc) If I try to hit cancel on any of the screens, it moves on to a different task it thinks I want done. If I try to follow through with the task it wants to do, it cancels it on it's own and moves on to another task. It will also move through the screens and tasks without me around. It moves so quickly through the screens that when I do try to get to a certain screen, I sometimes can't, because the printer has taken off in a different direction of screens all on its own.
All software is up to date.
I have tried turning it off, unplugging it, waiting, plugging it back in, turning it on.
I have tried unplugging it while it is on, waiting, plugging it in and turning it on.
I tried a semi-full reset by pressing bottom left 4 times. It was actually really difficult because the printer kept changing screens randomly while I was doing it. I finally got it to do the reset. It got to the "now printing alignment page..." screen and then just moved on to the main screen. Never printed the page. Shortly after that it started doing the screen loop with wireless settings. And now it is back to doing a loop through all the screens again.
It seems to be pushing buttons on its own.
Does anyone have any idea of how I can fix this? Is there a way to do a hard-reset on this printer? Restore it to factory settings? Or doing you think there is something physically wrong with the touch screen where it is actually pressing buttons on it's own?

I'm having the same problem, including paper running through the printer randomly. I believe I completed a semi-full reset that (so far) has stopped the paper going through the printer. And, the random changes on the touch screen seem to have stopped too. But, the touch screen still lights up and goes dark randomly, whcih leads me to believe that all is still not well.
I too would like to try and hard reset if one is possible on this machine.

How can I hard reset my PRIMO 91 ? or pass a forgotten password ?

My tablet had a password which I forgot it . Can you help me pass this password or tell me how to hard reset the tablet .. Thank you

Sorry, we can't help with cracking passwords. Try contacting MSI about it (Note: you will need a proof of purchase): >>How to contact MSI.<<

How to physically hard reset?

Hi there, so I forgot my pin number to unlock screen and was wondering how to do a physical hard reset. Any help will be appreciated.
Solved!
Go to Solution.

Performing a system repair is the only way - This will factory reset your phone
Switch off your phone and unplug from Pc (Hold volume up and power for around 10 seconds)
Start PC Companion and select Support zone then Update my phone/tablet then in Blue Repair my phone/tablet and follow the onscreen instructions - When prompted connect your phone still switched off holding volume down or back button - This should start the repair or reformat process
If you are using Windows 8/8.1 or a 64bit operating system then adjust the settings for PC Companion and run in compatibility mode and chose Windows 7 or XP
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

How to make hard cover paper book from iBooks author digital book

Someone suggested I make a few hard cover books from my iBooks Author published digital book. How would you go about doing this?
What file should I should I use, (PDF, etc)? What printer would do this best (iPhoto publishing, etc)?
Hoping it will be easy to use the format of iBooks Author so that I won't have to make changes.
Many thanks for your help.

You can print directly from iBA or you can generate a PDF from the print menu and use that. Be sure to test layouts, orientation, etc. Of course certain content won't be output to a printer.
There are hundreds of printers to choose from - shop your budget.

How to make a reset password function work in OIM?

There is a requirement for resetting password for users in OIM.
An OIM admin should be able to reset a password for a specific user, and the new password which should NOT be known by the admin will be sent to the user via email. And the user will be required to change his password when he logins with the new password.
I know there is a 'Change Password' button in User Detail page. But the problem is the admin has to type a password for the user, which means the new password is exposed. Ideally, the new password is generated by system. Has anyone had any experience in dealing with this kind of case? Thanks!

See if this can solve or answer your requirements.
When User's account is locked, It is assumed that he has forgotten his password.
Write a scheduled task which looks for all the locked users.
Generate temporary password for them.
Send that password in a mail to those users.
This may not be exactly how you want it to be. But this will require lesses efforts as compared to customizing "Change Password" button on admin console.
To make it the way you want, Following approach can be useful.
Admin console of OIM is made using struts framework. So If you know struts, Reading into struts-config.xml file will tell you the action class which is executed on click of "Change Password".
Modify that action class and make it the way you want that to be.
-Kiran Thakkar

How do you hard reset your Nokia N97 phone?.....Re...

There have been so many methods told on here of which none work. How would the Nokia sepcialists do this? I need to reset to delete my existing email accounts.

have you tried this method
http://mynokiablog.com/2009/07/18/how-to-hard-reset-your-nokia-n97/
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

How to make hard hard drive turn off?

How do i turn off hard drives when they are not mounted?

The program you're looking for is hdparm. Check the man page & read the section on the -S option. Do not set the timeout too low or your drive may die sooner than expected. A hard drive can only spin up/down so many times.

How to make hard disks hidden?

I Have 2 HDs and i want to use them on my macbook via network and to do it, those disks needs to stay connected to my sister's mac pro. This disks have confidential and work files that no one can't have acess. Does exist a way to make this disks hidden on my sister's mac and mounted only on my macbook?
One of this disks are used to keep my files and the other one is used by Time Machine backups.

You can change Sharing & Permissions on those drives so that only you can access them. Right click the hard drive icon and select Get Info.
In the bottom of the new pane you have to click the padlock and authenticate. Sharing and Permissions should show you have Read & Write privileges. Change "everyone" to no access.

How to make hard reset on Toshiba Journ.E Touch?

Similar Messages

Maybe you are looking for