How to make High Quality HD DVDs from iMovie11 Toast 10 Titanium Pro?

I was searching all over the net to find answers to a problem that I have with film making at home. I'm trying to become an Indie film maker on a small amount of money to start out, so to speak. I've asked Apple over and over for some help, but they say - we can't because we don't support third party solutions. I have iMovie 11 and iMovie HD 6. I use AVCHD 1080i camcorders and a GoPro HD Hero for time lapse shots. Toast 10 Titanium Pro and a external LaCie d2 Blu-ray Drive also external hard drives. I'm trying to make high quality HD dvd's and then Blu-ray disks later also for my ( high elevation mountain video) demos. Codec/compression - bit rate/data rate - key frame - sample rate and what software to use or not is all confusing me. I've tried and I'm still not making video that looks as good as it did when first imported into iMovie. Can anyone please help me out with this mater. Thank You Good Day

Good FAQ type information [is at this link|http://discussions.apple.com/thread.jspa?threadID=2424451]
In general, import to iMovie in FULL, not LARGE.
Export from iMovie using the SHARE menu. Use the 1080P Preset. You can SHARE/iTUNES, SHARE/MEDIA BROWSER, SHARE/MOVIE..., or FILE/FINALIZE PROJECT. All will use the 1080P preset.
You can also SHARE/EXPORT TO QUICKTIME, but I would not recommend it unless you know what you are doing.
Drag this file into TOAST 10 with BluRay plugin.
Check FILE/PROJECT PROPERTIES in TOAST to make sure you are burning at highest quality.

Similar Messages

  • How to make high-quality DVD

    I want to make high-quality DVD(Blu-ray Format) with premiere.
    But, when I used Ecore and select Blu-ray to exported the image disk.
    (want burning the DVD from toaster).The DVD was video only.(The menu has not been played).
    If changed to DVD to exported the image disk, it was ok, the menu has been played.
    Did I lost step or wrong way?
    thank you
    li

    Effectively, I post this because I hope help other one to solve this issue.
    So at first I didn't not very clearly understand about it.
    The issue point is hope export AVCHD disk form Premiere/Encore.
    (Premiere Element can export AVCHD file).
    Now, I thought the Premiere/Encore can't export AVCHD disk.
    The menu describe form in the other one, I think is not  issue point and maybe operate mistake.
    thank you!

  • How to make a self-playing DVD from FCP project of 75 minute film.

    A Quicktime film has been made in Final Cut. It is about an hour and 15 minutes long. It needs to end up on a self-playing DVD.
    Maybe this is a question for the FCP boards (or for DVD SP, which I don't know well): What's the approach to get this project to DVD?---having it look best on the DVD. Are there compression best practices?

    Or you may be able to make a Kiosk mode DVD from a QT file / folder using iDVD. (btw ...I've done this successfully thru iDVD6 but I have not yet tried it under iDVD08):
    http://discussions.apple.com/thread.jspa?messageID=4764361&#4764361
    Please note that this approach is the only way I know of to make a DVD (w/in iDVD) that plays by itself and with no menu whatsoever. Hence the DVD will always play in a continuous loop until you press stop or eject on the remote. Or if you prefer you can also use Roxio Toast which has a similar feature.

  • How to make high-quality QuickTime export?

    I have a question regarding the QuickTime export.
    I have a very pretty Keynote Preso with some nice transitions, and I want to export to QuickTime. When I export with expert settings, using H.264, 60fps, 512x384, the movie looks great - but plays VERY choppy even on my dual-core 2.0 GHz mac. It looks pretty, and if I step through the frames I can see they're all there... it should be able to transition smoothly, but the transitions look awful.
    I've noticed that if I export an interactive QuickTime movie, the transitions are smooth and beautiful! But I don't want it to require user clicks - I want it automatic. So:
    - Can I make my QuickTime export look good AND smooth?
    or
    - Can I make the "interactive" QuickTime export play by itself?

    Effectively, I post this because I hope help other one to solve this issue.
    So at first I didn't not very clearly understand about it.
    The issue point is hope export AVCHD disk form Premiere/Encore.
    (Premiere Element can export AVCHD file).
    Now, I thought the Premiere/Encore can't export AVCHD disk.
    The menu describe form in the other one, I think is not  issue point and maybe operate mistake.
    thank you!

  • How Can I Make a High Quality HD DVD Video (dvd vob)

    i work a hd project and after we will make a dvd video. if i export a mov and convert it with toast titanium the quality is bad. if i make it dvd studio pro hd dvd mac and pc is open but dvd player does not play it. and the other version dvd studio pro convert from 16/9 to 4/3. but i don't like it. the other one i send to compressor and chose the dvd/hd dvd:mpeg-2 30 minutes it exports mv2 not vob(audio ts video ts)
    so i want to make a high quality hd dvd video how can i do that?
    thanks
    Message was edited by: rec_off
    Message was edited by: rec_off

    I don't know about NTSC but there is a nice PAL solution for SD 16:9 for ordinary DVDs. The 16:9 image becomes 720x576 pixels. So the pixels are each quite wide, and the horizontal resolution is less than the vertical resolution, but at least no pixels are wasted as with letterbox.
    A semi-solution is to make a HD-DVD. That format has been abandoned but Apple software pretends otherwise. Apple Compressor does compressions at around 20 Megabits/second data rate specifically for HD-DVD, and Apple DVD Studio Pro makes HD-DVDs. For short projects, less than around 30 minutes, the HD-DVD can be made on a normal DVD. (I did this for a 40 minute project by cutting the bitrate somewhat.) The quality is almost equal to Blu-Ray, but who can play it? People with well equipped Apples can.

  • How to make report with access 2010 from SharePoint Discussion lists 2013

    HI,
    I want to make an access report from SharePoint Discussion lists 2013. When i open the list with access, the body of the list is in HTML format in access. Also if i reply something to one subject in the discussion, the reply is not mapped to that subject
    but instead it is shown as a separate entry in the database.
    Anyone can please help?
    SAN
    Santhiya
    Santhiya

    Hi Santhiya,
    I have seen a similar post from you, my understanding is that you wonder that the reply is mapped to the related subject. You can take a look at Daniel's reply in the following thread:
    http://social.technet.microsoft.com/Forums/en-US/dfb5bcb9-0076-412a-b34f-46aa9cfba876/how-to-make-report-with-access-2010-from-sharepoint-discussion-lists-2013?forum=sharepointgeneral
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • How to make separate/individual text frame from one parent frame in indesign with javascript

    Hi all,
    Please suugest - how to make separate/individual text frame from one parent frame in indesign with javascript.
    Thanks
    Rohit

    @Larry – ah, your interpretation could be the right one…
    May I rephrase the question:
    "How to split threaded text frames to single ones?"
    "SplitStory.jsx" or "BreakFrame.jsx" under Scripts/Samples indeed could be the answer.
    From the comments in the code of "BreakFrame.jsx":
    //Removes the selected text frame (or text frames) from the
    //story containing the text frame and removes the text contained
    //by the text frame from the story.
    //If you want to split *all* of the text fames in the story, use the
    //SplitStory.jsx script.
    Uwe

  • How to make a pattern in illustrator from a placed image ?

    how to make a pattern in illustrator from a placed image ?

    Just embed the image and make a swatch of it.

  • How to make the audio track independent from the video track?

    Can someone remind me how to make the audio track independent from the video track? My memory just went blank. Must be the age.
    Thanks

    Hi -
    Select the clip in the timeline.
    Type Command + L or go to the menu Modify > Link to toggle it off.
    MtD

  • I am looking for a high quality video converter from MTS or M2TS format to MAC...there are loads of softwares claiming they can do it but all turned out to be disappointing qualitywise...any idea?

    I am looking for a high quality video converter from MTS or M2TS format to MAC...many softwares claim they can do it but turn out to be disappointing (low quality...).
    Please advice if you know of any solution or serious test forums.
    Thanks!

    Also, you didn't say for what purpose you need them converted, but this thread might ofer a clue:
    https://discussions.apple.com/message/21389296#21389296

  • How to make Address Book obey Preferences? I run MacBook Pro 4.1 laptop,  Mac OS X 10.6.8  Address Book 5.0.3 (883) Preferences set at ... General First name following Last name   Sort for Last name Address Format Canada Font size Large Phone format set a

    How to make Address Book obey Preferences?
    I run MacBook Pro 4.1 laptop,  Mac OS X 10.6.8
    Address Book 5.0.3 (883) 
    Preferences set at ...
    General
    First name following Last name 
    Sort for Last name
    Address Format Canada
    Font size Large
    Phone format set at
    +1.123.456.7890
    When application quits - it's all forgotten and it self-resets to
    unwanted configuration.

    Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the third-party developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
    Here are some general guidelines. Suppose you want to remove something called “BrickYourMac.” First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickyourmac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, email the developer. While you're waiting for a response, download BrickYourMac.dmg and open it. There may be an application in there such as “Uninstall BrickYourMac.” If not, open “BrickYourMac.pkg” and look for an Uninstall button.
    If you can’t remove software in any other way, you’ll have to erase your boot volume and perform a clean reinstallation of OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
    Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" that purport to remove software.

  • How do I extract an audio file from a PDF in Pro? (Mac)

    How do I extract an audio file from a PDF in Pro? (Mac) . Properties say it's a .m4a file.
    Thanks

    Hi Tim,
    That isn't a supported feature. If the PDF is unsecured and you have the legal rights to extract the audio, it would be possible to locate and decompress the raw file data from the PDF file using third-party tools to read the low-level file structure (a hex editor or Cos editor) - but Acrobat can't help you.
    Regards,
    Rave

  • How do I check and clear malware from my Mac book Pro 10.6?

    How do I check and clear malware from my Mac book Pro OS x 10.6?

    Helpful Links Regarding Flashback Trojan and Virus Protection
    An excellent link to read is Tom Reed's Mac Malware Guide.
    A link to a great User Tip about the trojan: Flashback Trojan User Tip.
    To check for the trojan: Anti Flashback Trojan 2.0.4.
    A Google search can reveal a variety of alternatives on how the remove the trojan should your computer get infected. This can get you started. Or the preferred method is to use Apple's protection tool: Flashback Malware Removal Tool 1.0.
    Or, open Software Update. If you do not have the Apple protection software installed it will download and install it via Software Update. If no update appears that means you either already have it installed or it isn't needed for your system. The software is only available for Leopard, Snow Leopard, and Lion versions of OS X.
    Also see Apple's article About Flashback malware.
    For general anti-virus protection I only recommend using ClamXav.
    For the DNS Changer malware see the following:
    Will your internet service cut off on July 9?
    DCWG | DNS Changer Working Group
    How to remove the DNS Changer malware

  • Best way to make a high quality slide show from still images

    I know that this may have been asked before but i am trying to create a high quality slide show of my still images that will look great on a TV. I have tried imovie, idvd, and iphoto and i am not happy with the quality. i do own FCP. can anyone walk me through a way to create a high quality slide show and then burn it on IDVD.
    any info would be appreciated
    John
    power mac g5 dual 2 gig   Mac OS X (10.4.6)  

    i usually lay everything out in FCP. if you're going to use music or voice overs, lay down your audio tracks as appropriate. then cut all of the stills to you audio to get the timing just right. don't do any motion graphics in FCP. then, when you're satisfied with the cuts, send the entire sequence to Motion and do all of your motion graphics (grow/shrink, spins, throws, fades).
    i find that all of the motion effects can be done more easily in the Motion application. this has been my preferred workflow for over a half-dozen slideshows now.
    scott
    PowerMac G5 2.5GHz   Mac OS X (10.4.5)  

  • How to improve the quality of DVD?

    I know that there is a option of best perfermance or best quality in the preference menu.
    I have tried the "best quality" and encode a 1 hr. video from DV Cam , the size of the video is only around 2 G out of 4.2.
    While I use my DVD HD recorder to make a DVD, I chose the best quality and the quality/resolution of the DVD is much better compare with the one made by the Mac book.
    How can I increase the quality of DVD captured from DV cam?
    Any helps?
    Macbook 2.0   Mac OS X (10.4.7)  

    welcome wwb to the  board ...
    there are no manual-settings in iDVD for setting bitrates...
    to "set" the highest possible bitrate, make project shorter then <60min plus choose "Best performance"... (the naming is irritating... BP creates VBR, which is "better" compared to CBR, which is in iDVD-ish "Best Quality"...)
    helpful?

Maybe you are looking for