How To Make Infocube Visible in Query Designer?

hello,
i'm using BIW 3.10, i've just created infocube and succesfully populated it with data. I went through all the process from datasource (from R/3 masterdata), infosource, infoobjects and so on, until i get to browse the content of the infocube using the "Manage Data Targets" screen of rsa1->modeling->InfoProvider->Manage. Now my problem is how do i make the infocube visible in the Query Designer?
thanks,
sid

hi sid,
you have open bex analyzer, and click 'query', in next screen 'sap bex : select query', click 'new' (icon blank page), and click 'infoarea' in left side, you will see the infocube under your infoarea. hope this helps.
for new infocube, when there is no query created from this infocube, the infocube will invisible, since the screen is to select existing queries.

Similar Messages

  • I accidently "hide" some of my purchased apps in the app store and need to know how to make them visible again.

    I accidently "hide" some of my purchased apps in the app store and need to know how to make them visible again.

    Mac App Store- Hiding and unhiding purchases

  • Attribute not visible in Query Designer

    hi BI Gurus,
    I could not see some InfoObjects(Attributes) which are marked Authorization Relevant, in the query designer. And the strange thing is, they are not visible even for the user with SAP_ALL and 0BI_ALL assigned. The authorizations for the  cube in which the main char is used looks fine.
    I have checked all the options in RSECADMIN, everything looks good.
    pls help me in finding the solution..
    thanks
    Cnu..

    check out with the info object screen in attribute tab, navigational attribute on/0f switch box, if u r using FF source system.
    check out with the infocube whether u r checked the check boxes in navigational attribute tab.
    regards
    harikrishna.N

  • How to make changes in infose query in SQ01

    Dear experts,
    I hv question abt infoset query.
    I m not very familiar with infoset query and now i hv to make some changes in already existing query.
    I hv found the infoset in use.
    from this infoset i can find the query.
    Now the question is I just hv to insert one field in selection screen and and same in output list. This field has to come from a table which is already in use in joins. I just have to tick the checkbox to appear the field in selection screen and in outputlist.
    But I m not sure, if i make any changes in query, what will be the effects because the query is in production system and i hv to make changes in the production system only.
    and before sq01 i hv to drag and drop that field in infoset sq02..
    Can any one pls guide me , how i should make changes in query.
    Thanks in advance
    Jaspal Kumar
    Edited by: jaspalkumar on Feb 25, 2011 10:43 AM

    Thank you very much for ur reply.
    Actually, there are tjhree table joined in sq02.  One is KNVV. i hv to add customer group into selection screen and output list also.
    SO i will hv to make changes both in sq02 and then sq01.
    how i supposed to do it.   I m very sory asking again and its like spoon feeding,
    but to be very true report is in production and i m very scared of ripple effects of changes as i hv less idea abt the infoset.
    Pl;s guide,
    With best regards,
    Jaspal Kumar

  • How to merge text attribute in query designer

    Hi,
    please does anybody know, how to merge, let say, two text attributes of one characteristic into one long text? I know, that it is possible with method, which is finally called in the Web Application Designer. But I need to proceed this on the query level. It means, when I display result of query in query designer, I need to have two attributes merged into one long text. Is there some exit, method or something else, where can I do it?
    Thank you very much
    Best Regards
    J.

    Hello,
    I don't think so we have string concatenation at query level.
    You have to create / use existing info object and use string functions to achieve this.
    Might be you could wait for some time to get more replies.
    Regards,
    Venkat

  • How to get grand total in query designer

    Hi,
       Antbody know how to get the grand total after the  last row in query designer? I
    Thanks

    Hi,
    If we select the very first Characterstic in the rows section and set the Supress result rows as "never".
    That will show the overall result in the end of the report,
    In the query properties tab ,check for display properties of the result.That should be set to bottom.
    Hope this will work.
    Thanks
    Mukesh

  • Cant see the infocube in the Query Designer

    Hi,
    I am working with 0FI_GL_1 datasource. Activated the respective business content in BW and loaded the data into 0FIGL_C01 infocube.
    when I go to query designer to create a query, I dont see this infocube. Is this permission (security) issue? Or Do i need to anythingelse?
    Thanks a lot
    Sri

    Hi Sri
    after clicking on new(blank page icon) to create new query, if ur not able to see ur cube, just click on binaculor icon i.e to to find and type ur cube tech. name and search, then u can find ur cube.
    Hope it helps..........let me know
    Regards
    NR
    *Assign points for helpfull answers
    Message was edited by: NR

  • Variable not visible in query designer

    Hello,
    I have 4 variables created for an InfoObject. But for one of my query written on Infoset, under that InfoObject in query designer it only shows me 2 variables.
    Any ideas what is causing the other 2 variables not to be visible?
    Thanks in advance,
    vamsi.

    which type of variables have you created?
    Regards,
    Chandra.

  • How to make tables visible for Group Operations

    Hi:
    - SunMC Group Operations has a 'Modules Table' option which
    allows users to edit tables within a module
    - Why is it that for some modules, the tables are not visible at all, but
    for other modules, the tables are visible ?
    - Is there any documentation available which outlines how to make a module's
    table visible under SunMC Group Operations 'Modules Table' option ?
    thanks
    J L

    Please check the below thread.
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/eff6e995-e13e-4e30-844e-6242a613daff/making-sp-apps-visibleinvisible-to-users
    My Blog- http://www.sharepoint-journey.com| Twitter
    If a post answers your question, please click "Mark As Answer" on that post and "Vote as Helpful

  • New key figures in multiprovider not visible in query designer

    Dear Experts,
    I added a cube and  keyfigures to the multiprovider definition.
    The multiprovider is activated successfully.
    The added keyfigures come only from this new cube.
    I  identified these new keyfigures to this new cube only.
    There is an existing query based on old version of the multiprovider without the new cube.
    When i relaunch query designer and re-open this query, i could not see the new keyfigures.
    When i create a new query, also its not showing the new keyfigures.
    Is there something not refreshed that I do not see these new key figures?
    Kindly advise. Thank you!
    Best regards
    Bass

    Hi,
    Some time it happens that newly added key figures and characteristics are not visible immediately in Bex query designer. Just check for warnings if any encountered while activating else try editing and re activating your Multiprovider and also proper field assignment.
    Newly added Key Figures should be visible in both New and Old queries without any differentiation. Just log off and log in back after some time, there is a good possibility that this inconsistency would be resolved.
    Regards
    Raj Rai

  • HELP! How to make RRI from BEX query into Workbook with one report???

    How to make RRI from query into Workbook???

    Hi Alex,
    A workbook is a set format of queries, so when you try to jump to another query , you will definitely open another session and hence another excel file. This is the same for web templates also though you have an option of opening the new result in the same window.
    You would have to use some macros and open the query on the same page. A RRI is a query jump and not a drill down . A drill down would be getting more of the dimensions into the query.
    Regards
    CSM Reddy

  • How to make icon visible?

    HI !
    I´ve been making some icons with photoshop and icon composer, everything is fine except that I don´t know how to make the ready icon visible without third part application.
    At the moment icon composer leaves the icns file icon to applications own document icon.
    So:
    How to change icns files so that the icon that they contain is the icon that they display?

    I am at work (Windows) so I can't try this now, but, I've copied icon images between items by copy and paste. I wonder if you can, open the file, select and copy the icon image. Close the file, open the "Get Info" dialog, click the icon to select it (in the "Get Info" window) and paste.
    Otherwise there is a program (freeware I think) called "Pic to Icon" that makes the files icon the same as the picture it contains. I don't know if it works for .icns file though. But, if it doesn't the work around should be pretty easy.
    Good Luck!

  • How to make feedback visible to all user having read permission

    hi,
        for a document , a user is giving a feedback. my need is how to make that feedback visible to all user. all user are having read permission only.
      help will be appriciated
    Regards,
    Shanthakumar.

    Hi,
    Normally we use feedback as an explanation by an approver to the previous approver about his action on the doc( reject/approve).
    I think you want ur users to view the doc and then give suggestions to make it better and these comments should be approved and then made visible.
    I replied on one such thread earlier too.
    Please have a look at this [thread|https://www.sdn.sap.com/irj/sdn/thread?threadID=816692]
    I hope it helps.
    Regards,
    Sumit

  • How to create an exception in query designer?

    Hi,
    I am new to BW. I created an exception and set the from and to limits with an alert level of green for an amount column. When I run this query in the web, it does not change the color to green for the condition in the amount column. What is the validity area of exception? Do I need to enter anything there? I am in BW 3.5

    Hi,
    You need to change the default option Result only to all the cells in the second tab(cell defining) of Exceptions in query designer.
    http://help.sap.com/saphelp_nw04s/helpdata/en/68/253239bd1fa74ee10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/1a/615f64816311d38b170000e8284689/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/68/253239bd1fa74ee10000000a114084/frameset.htm
    Hope this helps............
    Rgs,
    Ravikanth.

  • External monitor: how to make toolbar visible on both

    I have an external monitor attached to my MacBook Pro and it is currently set up as the secondary monitor. Somehow I managed to get the resolution I wanted on both screens, i.e., greater on external without mirroring. But how do I view the toolbar/dock on both. My husband has done it on his, but doesn't know how he did. On the other hand, he must sleep his laptop to get the appropriate resolution on external.
    How to make both things happen?
    Thanks, Marion

    RETRACTION My husband was confused or I was. Double toolbar only with same resolution on both screens.
    Sorry.

Maybe you are looking for

  • Can iPhone messaging be used for free when in Europe?

    Please advise if free iPhone messaging can be used in Europe.  It would be handy if we could communicate this way to set up meetings

  • Compare pdf:s in Acrobat X

    I have recently updated to Acrobat X (on Win 7 X64) from Acrobat 7 (on Win XP) and can no longer compare pdf:s as I used to do. Comparison of pdf:s created in Word still compare as expected and generate a good report with marked differences. However,

  • Can't draw connection from anything to destination schema in BizTalk Mapper

    I'm new to BizTalk, so forgive me if I'm not using the correct terminology.  Anyways, I've created a composite Schema with two tables that I'd like to insert into, it's basically like this: <xs:element name="StorageLocationImport">     <xs:complexTyp

  • Writing SQL statements in piublic methods

    Why shouldnt i write my sql statements in the public method itself rather than directing it to a private method and access the data base?

  • W540 unable to utilize K1100M in Windows 8.1

    W540 doesnt recognizethe K1100m in Autocad 2015 it only uses the HD 4600 integrated card. Autodesk recognized the issue and said, "even though the GPU notification icon in the tray reads that its using CAD, its only reading the file that the cpu is p