How to Make installer for one Computer ?

Hello All,
I want to make application installer only for one computer, like single license copy how it is possible in LabWindows/CVI ?
Is there any LabWindows build-in option or how it will possible ?
Regards
Umer
Solved!
Go to Solution.

I don't think there is a bult-in capability to create an installer that will run on a single PC, but you can incorporate in your application instructions on some hardware item of the target system and create your own licensing algorithm on them.
This subject has already been discussed in this forum: you can look at this thread and this other one.
In the last page, I mention a sample of mine which is available on the Community: I have updated it to retrieve the disk serial number also, as it can be useful to get a unique sign for a specific PC; the sample uses WMI to get system infos: you can find the modified version attached to this message. You need full CVI version to run the sample.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?
Attachments:
CallWMI_2.zip ‏11 KB

Similar Messages

How do i transfer music for one computer to a laptop via home sharing?

how do i transfer music for one computer (desktop) to a laptop via home sharing? the home share is switched on but cant see how to transfer music over
i cant see the little house on the left hand side under where it says genius, 90s music classical music etc, there is also no import or export botton at the bottom of the screen.

Welcome to the Apple Community.
Select the content you want to import from the shared library and click the import button at the bottom of the screen.

I have a MacBook that is synced with my ipad. My daughter has an Iphone4 and no computer. How can we use the one computer for both devices that are unique?

I have a MacBook that is synced with my ipad. My daughter has an Iphone4 and no computer. How can we use the one computer for both devices that are unique and keep them separate. thank you for your help!

This should help:
How to use multiple iPods, iPads, or iPhones with one computer
Regards.

How to make more than one partition on Airport Time Capsule?

how to make more than one partition on Airport Time Capsule?

Only for the very brave......
Open up the Time Capsule (voids the warranty)
Pull the hard drive
Place the hard drive in a separate enclosure
Connect the enclosure directly to your Mac
Use Disk Utility to partition the hard drive
Reinstall the hard drive back in the Time Capsule
For the rest of us.....
The next best thing might be to set up one or more disk images on the Time Capsule, which will allow you reserve a given amount of space for each disk image.
Open up Macintosh HD > Applications > Utilities > Disk Utility
Click on the New Image tab
Navigate to the Time Capsule
Set up the disk image by naming it and specifying how much space you want to reserve

How to make entry for transit loss in the system

Hello to all,
I am having an issue with one subCon material.
Suppose,
Material A is the product required of 3000 MT Qty.
SubCon vendor have sent that qty, but there is a transit loss of 500 MT.
How to make entry for this transit loss in the system.
regards,
Anisha

correct me if i am wrong-
ur scenario is
for making material A ,
3000 MT of material B required.
but for producing A vendor uses 3500MT of B
solution : if this ia the case then u can overwrite the value of B at GRN from 3000MT to 3500MT.
OR
ur scenario is -
u require material A of 3000MT
vendor sends u 3000MT
but actualy u recieve 2500MT
and u have to pay for 3000MT as per bill
solution : if this is ur scenario then.
prerequisite-activate direct posting to G/L and material at MIRO
Path - SPRO->MM->LIV->activate direct posting to G/L and material at MIRO.
now procedure is -
step 1) do GR for 2500MT
step2) in LIV pay to vendor for 3000MT for that put 500 qty in material tab and the relavent amount.
in this way loss in transite will be book on inventory.
regards,
sujit

Example to demonstrate how to make rebate for business

Hello Gurus,
please give a example to demonstrate how to make rebate for business?
thanks very much!

hi
Rebates Processs in SAP is divided into three components
1) Configuring Rebates
2) Setting Up Rebates
3) Managing rebate agreeeements and payments
Pre-requsiistes- Check the following:
1.The payer partner needs toi have the rebate field checked in the customer master on the sales area-billing doc tab.
2.The Billing type must be marked as relevant for rebates.
3.The Sales Organisation must be marked as relevant for rebates.
Condition Technique :
Rebates, use the condition technique, but distinguish themselves from pricing in applying to transactions over time, versus on a transaction basis. Rebates have their wn field catalog and their own condition table naming convention.So you could have two condition table "001" one for pricing and one for rebates, which could have different key fields. You need to use the technical names A001 For pricing and KOTe001 for rebates when you use the query type using transaction SE 16..
Use create access sequence (AS). Enter 1 in field category for rebate specific. AS after going thru the right path of maintaining access sequence for rebates.
The big difference between the rebate and the pricing access sequence is that there is no exclsuion flag available for rebate related AS. This means multiple tables for an access sequence can be aplied at the same time.
Rebate related condition types are identified by codnition class -C.
After defining and creating condition types for rebated include them in the pricing proceedure. The requirement should be 24 here which implies that the accruals are calculated on the basis of invoice/bill.
The other fields- alctyp and altcbv does not allow you to manipulate how a rebate is calculated. Also, remove the requiremnt 24, if u want to see reabtes at order time.
Now payment of rebates:
Payments can be maunal or in full settlement. When you do manual payments, it defines how much can be paid out during a partial settlemetn. You use partial settlement only when rebate agreement is defined for a full year but the paoyouts are supposed to happen on a monthly, quarterly or anyother specified period.
These accurals are based on sales volume and when they are posted billing is created int eh follwoing manner. Provision for accruals is debited and Sales revenue is credited. When rebate credit memo is created
Customer account/ is debited and
Accrual provision account is credited.
Also, please note that when rebates are created without dependent ona material but on customer/material you need to refer to a material for settlement.
First of all rebates are more or less discounts which are offered to customers. The rebates are based on the volume of the business the customer does with you within a specified time. for eg if the customer agrees for Rs.1 Crore worth of business with u in 1 year, then you activate your rebate porocess. if at the end of the year the customer DOES achieve the target u offer him say 2/3/4 % whatever is decided. The rebates are passed on to the customer in the form of Credit notes.
The rebate can be given to the customer at one time or in installments also.
This is broadly the outline of the rebate process.
Note : I recomend you to study the theory part of why rebate and why not a discount.
This will help you understand better.
May be I can help you with rebate process.(IN -IMG)
1. define a rebate agreement type
2. define a condition type group
3. define a condition type and place this condition
Type in the pricing procedure.(REQUIREMENT=24)
ALSO IN THE PROCEDURE- ACCRUAL KEY = ERU
YOU ALSO HAVE TO DO THE ACCOUNT DETERMINATION FOR REBATES.
Once you have defined all the 3 and assignment starts.
Assign the agreement type to the condition type group
Assign the cond type group to the condition type.
Condition technique is also used in rebates.
REBATE ACTIVATION- IN CUSTOMER MASTER, SALES ORGANISATION AND FOR THE BILLING DOCUMENT.
After having done this please proceed to maintain the condition record for the rebates (transaction code-vbo1)
Note: if you maintain the requirement coloumn with the requirement as 24 - the rebate will be affected in the billing document and if you dont give the requirement as 24 your rebate will be affected in the sales order.
The rebate process is completed when you have created a credit memo to the customer.
The document type for the partial settlement is R3.
Please make sure you open two screens SO THAT YOU CAN COMPARE THE NEW ENTRIES WHAT EVER YOU'RE DEFINING WITH THAT OF THE STANDARDS or first you try with the standard condition type boo1, boo2
boo3 boo4.
AFTER YOU HAVE FINISHED A COMPLETE SALES CYCLE OF CREATION ORDER , DELIVERY AND BILLING.
GO TO THE CONDITION RECORD IN CHANGE MODE (VB02) AND SETTLE THE ACCOUNT PARTIALLY.
In a simple way,
1. First you need to create a Rebate agreement.
2. Create condition record for rebate giving the rebate rate and accrual rate.
3. when the rebate relevent billing doc is generated, the rebate and accruals are determined and posted in a seperate GL account as a noted item - amount to be settled. Also it gets copied in the rebate agreement.
4. create settlement run using credit memo request and then credit memo to settle this amount with the customer.

My account is good for one computer. Or is it?

My iTunes setup says that my account is good for one computer. Would that include using the iPod (account) connected and synced to my PC? Do I need to similarily setup the same or different account on my iPod? Please explain. (Note: My iPod already syncs with the CD I added to iTunes in my PC.)
How many pieces of gear can used in this fashion (ie: iPod, iPad, iPhone, and computer), I'm guessing management on one computer plus another piece of hardware like iPod . . . or am I wrong?
I guess to avoid confusion . . . is one account for both sufficient and agreeable to Apple?
Any advice or help will be appreciated.
TIA

Well, I'm getting on since I hit Trafalger when I was 18 (old enough to hit the pubs there but not here). I hung out at the Friend At Hand and drank Watneys (and anything else). Made it to Liverpool, Torquay, and in between. Some of my best memories. Almost had a ideal job at BOAC, but immigration quotas from the far east nixed that. Still listen to Radio Caroline on this side of the Atlantic.
Got my connection and account to iTunes working on both the PC and iPod now. Haven't located iTunes radio though on the iPod. Do you know if it is even possible with the older 4.2 version?
Thanks, again.

How to Make BDC for transcation KKS1

Hi dear,
can any one tell me that how to make BDC for KKS1.
because i have recorded the BDC and converted into the program logic than it is showing the first window but not showing the window with ALV and futher more. So what coding i have to apply.
Please help.
Siddarth Jain

Hi,
U can record the flow in using SHDB transaction recorder.
U can record and it will generate the program, u can copy and paste the part of the code that is generated, in ur ALV report. this will call the transaction.
Do as follows:
<b>SHDB > New Recording > Specify Recording Name YTEST > Transaction code KKS1 > STRAT RECORDING BUTTON></b>
then speciy the vales u want to give to run the transaction. U can save and come back as soon as u reach the screen when u want to stop it.
EG:
Declare a messtab
DATA: i_bdcdata TYPE STANDARD TABLE OF bdcdata,
* Internal table to hold BDC messages
i_messtab TYPE STANDARD TABLE OF bdcmsgcoll
* Work area to hold bdcdata value
DATA: w_bdcdata TYPE bdcdata,
* Work area to hold BDC messages
w_messtab TYPE bdcmsgcoll.
CONSTANTS : c_e type bdcmsgcoll-msgtyp value 'E', "E
c_a type bdcmsgcoll-msgtyp value 'A', "A
nodata type c value '/'. "/
perform f1000_bdc_mm03 using lv_matnr lv_werks.
FORM f1000_bdc_mm03 USING P_LV_MATNR
P_LV_WERKS.
perform bdc_dynpro using 'SAPLMGMM' '0060'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RMMG1-MATNR'
p_lv_matnr.
perform bdc_dynpro using 'SAPLMGMM' '0070'.
perform bdc_field using 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(15)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_field using 'MSICHTAUSW-KZSEL(15)'
'X'.
perform bdc_dynpro using 'SAPLMGMM' '0080'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-WERKS'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_field using 'RMMG1-WERKS'
p_lv_werks.
perform bdc_dynpro using 'SAPLMGMM' '4000'.
perform bdc_field using 'BDC_OKCODE'
'=ZU01'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_dynpro using 'SAPLMGMM' '4300'.
perform bdc_field using 'BDC_OKCODE'
'=ZU08'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_dynpro using 'SAPLMGMM' '4110'.
perform bdc_field using 'BDC_OKCODE'
'=GESV'.
*perform bdc_field using 'BDC_CURSOR'
* 'RMMG1-MATNR'.
call transaction c_transaction_call_MM03 using i_bdcdata MODE 'N'MESSAGES INTO i_messtab.
<b>Kindly close the previous threads opened by u.</b>
Message was edited by: Judith Jessie Selvi

HT203254 how to make whats on my computer show on my t.v.

how to make whats on my computer show on my t.v.

I'm presuming that you've already made the connection with a suitable cable. What are you getting on the TV? Are you getting a completely blank screen? Are you getting a message similar to 'no input detected'? Or are you getting the spiral galaxy desktop?
If the last of these then what you have is an extended desktop. If you move the mouse cursor off the edge of the MBP's screen you will see it appear on the TV. Similarly you can drag windows from the MBP's screen to the TV. At present the MBP's screen is the primary display and shows the menu bar and dock, and the TV is the secondary display. To change this go into System Preferences -> Displays -> Arrangement. You will see an image of two screens, a smaller one representing the MBP's display and a larger one representing the external display. At the top of the smaller screen in the image is a bar, this represents the menu bar at the top of the screen. Drag it from the smaller screen to the larger screen. The external display will become the primary display and the menu bar and dock will appear there and any new windows or applications that you open subsequently will appear there too.
silvergc's suggestion to use mirroring will work, but you won't be using the native resolution of the TV which could result in fuzziness or bluriness of the image on the TV.

How to make more than one person can access the database at one time

how to make more than one person can access the database at one time

Please post further f'up's in the Access forum.
In short: for different reasons it is best practice that each user gets its own local copy of the database. This means that you need to split it into a front-end which only consists of the forms, queries, reports etc. Everything which doesn't need to be
shared. And a back-end, which only stores the data.
Take also a look at Allen Browne's article:
Split your Access database into data and application.
When you've splitted your database, you may often consider to use SQL Server as back-end. Here you may read Armen Stein's
The Best of Both Worlds: Access-SQL Server Optimization.

MCOD Installation on ONE Computer

is it possible to do a MCOD installation on one computer?
actually i encountered serious problems installing the SRM Server in a data base of an existing CRM System.
one problem i see is, that the user environment variables of the administrator are overwritten.
i think this was the reason why i run into errors while installing the database data base load.
could i perform an MCOD installation employing several ADMINISTRATOR accounts for each sap system to avoid this problem?
or what is the real problem with MCOD installations on one computer? has anyone else already tried it?
Message was edited by: Gideon Lenz

Hi,
Check the note 388866, it gives directions to where you find more resources on MCOD.. i believe it gives the email id of the SAP chap who deals with MCOD.
Also check the FAQ on http://service.sap.com/mcod
Hope that helps
Regards,
Siddhesh

How to transfer bookmarks from one computer to another?

how to transfer bookmarks from one computer to another?

Export your bookmarks (file menu in Safari, from the Show All Bookmarks option in Firefox) and save to your HD. Copy the saved .html file to the other Mac over the network, or by copying the file to a USB stick and copying to the other Mac, or emailing them to the other Mac. On the other Mac import the Bookmarks file into your browser of choice,

How to transfer photos from one computer to another

How to transfer photos from one computer to another fast from iMac to MacBook both on lion
help. Tried airdrop to slow

Hi roseabe
Please give us more details. What kind of computer (model, speed) are you trying to transfer from and to?
Besides, you don't hold down cmd/apple+"T" on the target computer - just the "T" key.
Matt

How to make folders for pitcures on iphone 4

how to make folders for pitcures on iphone 4?

sorry about that..Where do i find the replies to my posts? tks

How to make password for macbook

how to make password for macbook

Go to System Preferences - Users and Groups, select your user, and click Change Password. If you currently have a blank password, type nothing in the "Current Password" box.
Matt

How to Make installer for one Computer ?

Similar Messages

Maybe you are looking for