How to make it work in Europe? Need help
Hey!
I wonder if it is possible to use Samsung Galaxy S SCH-i500 Fascinate in other countries. This phone does not have sim card so I am asking for some help on working unlock in Poland I got it from my buddy from USA and I want to make Fascinate useful here in Poland It is possible to make it work on local operators without sim?
Thanks in advance!
Hello pepson93! The Samsung Fascinate is a CDMA only device, which makes it great for use in areas were CDMA signal is available. Unfortunately, the country of Poland does not have CDMA service providers so the Fascinate will not work there. I recommend seeking options for equipment with your local carriers. Best of luck!
Dion M.
VZW Support
Follow us on Twitter www.twitter.com/vzwsupport
Similar Messages
-
I cannot connect a Sony ILCE6000 camera for wireless downloading. Sony feels I need DLNE? They do not know how to make it work. Can anyone help OS10·9·5
I cannot use the software.. so you need to figure out where the problem is..
But let me suggest.. the Mac is not the issue and likely the info from Sony is also up the creek.. they make PC's after all.
It is far more likely the camera is having issues with the wireless network.
Do you know you have a connection to the home network on the camera.. ?? You have an IP address and some internet or local access at least?
How you will discover those things is by fiddling.. but if you can tell me what wireless AP you are using that will help. -
I need to sync my laptop and iphone with my bosses laptop and iphone. We need to be able to have access to the same files.
Any suggestions?Yes you can both use the same iCloud account.
-
i have a macbook pro and need to send a password protected document to a pc based computer and it shows up at the other end as corrupted and they can't open it- any suggestions on how to make it work?
It was tricky sorting out the actual questions in your post. I think the other poster has one question in hand, here's the other:
Post by Turingtest2: HowTo: Grouping Tracks Into Albums - http://discussions.apple.com/message.jspa?messageID=9910895 -
Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well
Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well
If you use an HDMI cable, the audiostream will be integrated, so there will be sound when using an HDMI cable!
Not necessarily. That only works as stated if you have one of the most recent MBP's that has a built-in HDMI port.
If the MBP only has a Thunderbolt or miniDisplayPort, you need an appropriate adapter cable and even if you use an HDMI adapter or cable to connect to your HDTV there is no guarantee it will carry audio. You have to determine if your specific MBP model supports audio out through its miniDisplayPort or Thunderbolt output, and whether the adapter does likewise. -
So, I'd like to get RSS working on my iMac. When I click on an RSS logo/button, I get the message "No associated application could be found." HUH??? Any idea on how to make RSS work??? In either Safari or Mail.
RSS has been removed from Mail and Safari in Mountain Lion, so you will need to use a thrd party application such as Vienna.
-
Hi Guy,
I'm newbie for MDM.I already intalled it on my machine(Window Xp)but dunno how to make it work.
The installed components are MDM/Syndicator/Import server,Console/Import mgr/Data mgr/Syndicator.
Do I have to install any component else?And Can you guy give me any guides/documents/Posts how to make it work.Cause I have to demo it next week but right now still blank about it...
Thanks
Parinya.Hi Jack,
For Demo Purpose,
1.Create few master records in R/3 Servers [ MM(Tcode MM01) /Employee(PA40) /Vendor(Xk01) /Customer(XD01) according to your MDM Repository(For Example "Products").]
2.Extract those master datas from R/3 Servers.
3. You will get the xml file of master datas.
4.Open the import manager and import the xml file into the MDM server.
5.In Import manager ,you need to map the records[Source Fields(Imported records) VS Destination Fields(MDM repository)].
6.Once you imported the record ,u can see the records in the MDM Data manager.
We can Create/edit/Delete those records .
We can merge the records for consolidation purpose.
We can perform Data enrichments process like Validation,Workflow,Assignments..etc.
7.Once cleaned the Master records,it is ready to distribute to R/3 servers.
8.Syndicator is used for sending data back to the R/3 servers
Here also we have to do Mapping against R/3 servers.
Using XI We can connect the R/3 Servers.
Hope u will understand this.
This is very simple example for MDC-MDH Scenario.
For futher learning on how to create a repository/Enrich the mater datas, go through reference documents in the Service Market place.
Best Regards
Devaraj PK -
SPA3000 FXO to SPA2000 FXS, how to make it work?
I'd like to create an environment so I can test the dial plan of SPA3000. But when I dial throughgw0 of SPA3000 while connecting FXO to FXS of SPA2000, from SPA2000 configuration I always get Call 1 State Invalid and Call 1 Tone Reorder. It seems that SPA2000 couldn't recognize the DTMF tone sent by SPA3000. Don't know how to make it work. Please advise. Thanks in advance.
I have a SPA3102 attached thru the FXO port to the FXS port of a SPA1001. I don't think there is anything special in the configuration.
On the PSTN Line Tab I have:
Preferred Codec: G711u
Use Pref Codec Only: no
DTMF Tx Method: AVT
VoIP-To-PSTN Gateway Enable: Yes
VoIP Caller Auth Method: none
Line 1 VoIP Caller DP: none
PSTN Dialing Delay: 1
VoIP Answer Delay: 0
If you are having trouble, for troubleshooting I would run the sip debug trace on the SPA3000. If the failure is in your line 1 dial plan you won't see anything in the trace. If the dial plan sends the call to gw0 then you will see the sip invite for the internal call inside the adapter and you should see the FXO port go off hook. If that looks OK you can run a trace on your SPA2000 to see the result there. The SPA3000 Info tab will also give you troubleshooting information. You should see the on-hook and off-hook voltage level of the SPA2000. You may also see information about the last pstn number dialed.
On the SPA2000, you would need to have it registered with a voip provider, or else have it set to Make Call Without Reg before it will accept an incoming call from the FXS port.
Message Edited by hw on 02-02-2009 06:02 PM -
When i charge my ipod it workd but as soon as i take it out the charger it doesnt work any suggestion on how to make it work?
It may need a new battery, take it to an Apple Store and check.
-
RdbmsRealm - how to make it work
I was running the example server. I would like to see if I can delegate the security to an rdbmsRealm. I followed the instruction from the documentation. I created the three tables for security in Oracle 8i Lite in my NT machine. I then startup the example server and created a security realm for my oracle 8i tables. I then selected the cacing realm and selected my oralce 8i Lite realm. However, this does not change the security because the new users that I created are still updated in the filerealm.properties file.
My understanding is that we should be able to use the oracle realm I just created for the wls realm. As for the caching realm, I thought it's there for performance reasons.
Could somebody tell me how to make it work? Thanks.Hi Susan:
I followed you instruction and modified the config.xml file to use the rdbmsRealm in that I set up in Oracle 8i Lite. I am using the Oracle 8i Lite driver to talk to the database. I then tried to create new users. From the console, it appears that the users are added successfully. However, the new users do not exit in the oracle 8i lite rdbmsRealm. They do not exist in the filerealm.properties file neither.
I then tried to use the cloudscape rdbmsRealm. This is achived by the following configuration in the config.xml file:
<CachingRealm BasicRealm="defaultRDBMSRealmForCloudscape" Name="defaultCachingRealm"/>
However, the realm initialization failed. Then I checked the definition for the cloudscape rdbmsRealm in the config file and found out that the schemaproperties entried are all chopped off. This is because of the bug you told me earlier.
I would like to get the cloudscape rdbmsRealm working first and then try to find out why the oracle 8i Lite rdbmsRealm did not work. Could you please send me the schemaproperties entries needed for the cloudscape rdbmsRealm? Thanks.
Helen
"Suresh Vallabhaneni" <[email protected]> wrote:
>
Hi Helen
Here is a sample of what you need in the config.xml. Modify to match your environment.
<Security
Realm="defaultRealm"
/>
<Realm
Name="defaultRealm"
FileRealm="defaultFileRealm"
CachingRealm="defaultCachingRealm"
/>
<CachingRealm
Name="defaultCachingRealm"
BasicRealm="defaultRDBMSRealmForOracle"
/>
SUBSTITUTE THE REQUIRED VALUES FOR THE RDBMS REALM
<RDBMSRealm
Name="defaultRDBMSRealmForOracle"
RealmClassName="examples.security.rdbmsrealm.RDBMSRealm"
DatabaseDriver="weblogic.jdbc.oci.Driver"
DatabaseURL="jdbc:weblogic:oracle:yourdatabase"
DatabaseUserName=""
DatabasePassword=""
SchemaProperties=""
/>
Let me know if you still have a problem.
thanks
"Helen Semus" <[email protected]> wrote:
Hi Suresh:
Yes, I was selecting the default cacherealm from the console.
I checked my config.xml for the exampe server. You are right. The schemaProperties attribute values are truncated. I guess I will have to manually modify my config.xml file to get it to work.
Besides making sure the attributes for the rdbmsRealm element correct, is there anyother element or attribute that I need to set to enable the rdbmsRealm?
Thanks.
Helen
"Suresh Vallabhaneni" <[email protected]> wrote:
Hi Helen
Are you trying to select the caching realm through console? There is a release note on this(http://www.weblogic.com/docs60/notes/issues.html#1029973) that selecting the caching realm through console will corrupt the config file. If you're doing otherwise, plz let me know.
thanks
"Helen Semus" <[email protected]> wrote:
I was running the example server. I would like to see if I can delegate the security to an rdbmsRealm. I followed the instruction from the documentation. I created the three tables for security in Oracle 8i Lite in my NT machine. I then startup the example server and created a security realm for my oracle 8i tables. I then selected the cacing realm and selected my oralce 8i Lite realm. However, this does not change the security because the new users that I created are still updated in the filerealm.properties
file.
My
understanding
is
that we should be able to use the oracle realm I just created for the wls realm. As for the caching realm, I thought it's there for performance reasons.
Could somebody tell me how to make it work? Thanks. -
DVR with fms3 , how to make it work?
Hi
I am trying to look for documentation on how the DVR functionality is working in fms3. It seems that I need to implement som server-side scripting to make DVR even work. In Flash Live Encoder there is an option to Record DVR, but it when I press the button, all I get is:
Thu Apr 30 2009 13:15:38 : Start DVR command received
Thu Apr 30 2009 13:15:38 : Requested DVR command has been successfully issued to Primary FMS server for stream ob1stream
Thu Apr 30 2009 13:15:38 : Primary - Network Status: NetConnection.Call.Failed error Method not found (DVRSetStreamInfo).
Does anyone know how to make this work?
Best Regards Niclasok i'm back for a second......so uhhh....class is in session here is a basic example of a video encoder
use this to stream your video while recording.....what makes it record?and not live? this line here:
ns.publish("thefilename", "record");
the second parameter.....to make it stream live without recording it to file you change it to "live"....the first parameter is what you name your file...
after this you use your client player to connect to the same connection as outlined.....and to play the same file ..ie stream.play("thefilename");
package
import flash.display.*;
import flash.media.*;
import flash.net.*;
import flash.events.*;
public class SimpleEncoder extends Sprite
var nc:NetConnection;
var ns:NetStream;
var mic:Microphone;
var video:Video = new Video();
var camera:Camera;
public function SimpleEncoder():void
NetConnection.defaultObjectEncoding = 0;
nc = new NetConnection;
nc.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
nc.connect("rtmp://localhost/video/myvids");
private function publishLiveStream():void
ns = new NetStream(nc);
ns.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
ns.client = this;
camera = Camera.getCamera();
mic = Microphone.getMicrophone();
if (camera != null){
camera.addEventListener(ActivityEvent.ACTIVITY, activityHandler);
video = new Video();
video.attachCamera(camera);
ns.attachCamera(camera);
if (mic != null) {
mic.addEventListener(ActivityEvent.ACTIVITY, activityHandler);
ns.attachAudio(mic);
if (camera != null || mic != null)
// start publishing
// triggers NetStream.Publish.Start
// "thefilename" is the name of the file you use after you connect to stream in client player stream.play("thefilename");
ns.publish("thefilename", "record");
else
trace("Please check your camera and microphone");
addChild(video);
public function onBWDone():void
private function netStatusHandler(event:NetStatusEvent):void
trace(event.info.code);
switch (event.info.code)
case "NetStream.Buffer.Full":
break;
case "NetStream.Buffer.Empty":
break;
case "NetConnection.Connect.Success":
trace("Congratulations! you're connected");
publishLiveStream();
break;
case "NetConnection.Connect.Failed":
case "NetConnection.Connect.Rejected":
// trace ("Oops! the connection was rejected");
break;
case "NetStream.Play.Stop":
break;
case "NetStream.Play.StreamNotFound":
trace("The server could not find the stream you specified");
break;
case "NetStream.Publish.BadName":
break;
case "NetStream.Publish.Start":
private function statusHandler(event:StatusEvent):void {
trace("statusHandler: " + event);
trace(mic.activityLevel);
private function activityHandler(event:ActivityEvent):void
//trace(mic.activityLevel);
public function onFault(e:Object)
//trace(e.info);
//nc.close();
}//end class
}//end package
thelegendaryghost -
E540 SSD caching - how to make it work
Hello. Does anyone know how can I rebuild E540 SSD caching? The problem is, that I formatted the whole notebook (1TB HDD + 16 GB SSD) and now after fresh install of Windows 8.1 it doesn't seem to use the 16 GB SSD as cache. I installed Intel Rapid Storage, but I can't install Intel Smart Response (which seems to do the SSD-caching) because it needs the RAID to be enable in BIOS but I don't have such an option. Any idea how to make it work?
Thanks in advance!ColonelONeill wrote:
I think you need the ExpressCache package.
Well that seems to do the trick. The quiestion is - why? On lenovo expresscache download page (http://support.lenovo.com/en/downloads/ds035460) my model (E540) isn't listed in the supported models. That's why I didn't even try it. Although I was considering this until I saw, that my model is not supported. -
How to make isight work with skype
hi
Does anyone Know how to set up the Camera with skype or msn messenger .
I have a Macbook pro with the camera in the top of the Monitor but have no idea how to make it work on any other program except photobooth , it works on ichat but i don't use ichat only Skype or Msn messenger ..
So if anyone can help me getting it to work on those would be great
thanksHello Globalmark
For your problem dealing only with Skype, Skype supports their product with a comprehensive Help system for answers to your Skype-specific questions.
If you cannot find the answer you need from their Knowledgebase, Troubleshooter, User Guides, or dedicated Skype-user forum, you can get technical support directly from Skype.
MSN (now Microsoft) Messenger for Mac cannot use ANY camera unless you are using the "corporate" version. The personal version is a text only app.
This post will give you the options available to you for using your MacBook Pro to contact those whose only chat client application is MSN (now Microsoft) Messenger.
Your posted system info shows that you are still using Mac OS X (10.5.1). If that is correct, you may want to consider the advantages of updating to the latest version of Leopard.
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.2) External iSight -
I bought a composite AV cable with 30 pin connector at a proper apple store for my ipad 2 which no longer works now i have updated to ios7 - please advise how to make this work ?
I have the same problem.
Two similar discussions:
https://discussions.apple.com/message/23081658#23081658
https://discussions.apple.com/message/23281391#23281391
I have not yet seen any official response to the question: "Is the Apple AV Composite cable fully supported with 30pin connector devices upgraded with iOS7 - specifically ? - eg. iPad 2, iPhone 4, iPhone 4s"
If it is not currently supported is that then due to a bug / oversight and in that case is it something that will be fixed in the near future?
Please let us know what feedback you got from asking Apple support. -
How to make buttons work in Interactive Adobe Forms
Hi Experts,
I am new to interactive form. Though i have worked in normal/non-Interactive form, i do not know how to make buttons work in interactive adobe forms using ABAP (I don't know JAVA). Can any one help me out and walk me through to how to code in ABAP to make buttons work.
Kind Regards,
Sharat.Please refer to my earlier post ... You will get an idea
Please refer to the below thread for detail solution
Sample Interactive form example ?....urgent...
Cheers
Satya
Maybe you are looking for
-
I am not sure what to do. My iphone 5, is nto working after I updated itunes,, it appears I lost all my stuff. Not sure if I should contact Apple or AT&T?
-
I don't know if this topic is being posted in the correct location. I am new to LabVIEW and the hardware associated with it. I am using an NI 9237 DAQ board for a senior design project in engineering and I was informed that I can make multiple connec
-
Late 2009 Mini: FireWire port - what size is it?
All I know is that the normal FireWire cable I have doesn't fit in the mini,s port. Googling suggests that there exist 8,9,4, and 6 pin variants of FireWire, although it doesn,t state whether those correspond to different form factors. Apple tech s
-
Multiple Accordians on same page
Hi Everyone, Hope this was not covered before, if so, I can't find it. I added a Spry Accordian to my page no problem. It looks and work fine. I now tried to add a second accordian to the page and it picked up the Style CSS fron the first but does no
-
Report DW error with CSS position
To the Adobe staff I use this forum cause I can't find where the F... to report an error! There is an error in Dreamweaver CS4 french (canadian) version. When you create a css style, the position tab, the fonction fixed has been translated and should