How to make it work please

select to_number('1,32352941e7','999999999999999D999999999999999','NLS_NUMERIC_CHARACTERS='',.''') from dual;

You need to tell to_number that you are using scientific notation:
SQL> select to_number (
   '1,32352941e7',
   '999999999999999D999999999999999EEEE',
   'NLS_NUMERIC_CHARACTERS='',.'''
) n from dual;
         N
13235294.1
1 row selected.cheers,
Anthony

Similar Messages

TS2634 I bought a composite AV cable with 30 pin connector at a proper apple store for my ipad 2 which no longer works now i have updated to ios7 - please advise how to make this work ?

I bought a composite AV cable with 30 pin connector at a proper apple store for my ipad 2 which no longer works now i have updated to ios7 - please advise how to make this work ?

I have the same problem.
Two similar discussions:
https://discussions.apple.com/message/23081658#23081658
https://discussions.apple.com/message/23281391#23281391
I have not yet seen any official response to the question: "Is the Apple AV Composite cable fully supported with 30pin connector devices upgraded with iOS7 - specifically ? - eg. iPad 2, iPhone 4, iPhone 4s"
If it is not currently supported is that then due to a bug / oversight and in that case is it something that will be fixed in the near future?
Please let us know what feedback you got from asking Apple support.

How to make buttons work in Interactive Adobe Forms

Hi Experts,
I am new to interactive form. Though i have worked in normal/non-Interactive form, i do not know how to make buttons work in interactive adobe forms using ABAP (I don't know JAVA). Can any one help me out and walk me through to how to code in ABAP to make buttons work.
Kind Regards,
Sharat.

Please refer to my earlier post ... You will get an idea
Please refer to the below thread for detail solution
Sample Interactive form example ?....urgent...
Cheers
Satya

SPA3000 FXO to SPA2000 FXS, how to make it work?

I'd like to create an environment so I can test the dial plan of SPA3000. But when I dial throughgw0 of SPA3000 while connecting FXO to FXS of SPA2000, from SPA2000 configuration I always get Call 1 State Invalid and Call 1 Tone Reorder. It seems that SPA2000 couldn't recognize the DTMF tone sent by SPA3000. Don't know how to make it work. Please advise. Thanks in advance.

I have a SPA3102 attached thru the FXO port to the FXS port of a SPA1001. I don't think there is anything special in the configuration.
On the PSTN Line Tab I have:
Preferred Codec: G711u
Use Pref Codec Only: no
DTMF Tx Method: AVT
VoIP-To-PSTN Gateway Enable: Yes
VoIP Caller Auth Method: none
Line 1 VoIP Caller DP: none
PSTN Dialing Delay: 1
VoIP Answer Delay: 0
If you are having trouble, for troubleshooting I would run the sip debug trace on the SPA3000. If the failure is in your line 1 dial plan you won't see anything in the trace. If the dial plan sends the call to gw0 then you will see the sip invite for the internal call inside the adapter and you should see the FXO port go off hook. If that looks OK you can run a trace on your SPA2000 to see the result there. The SPA3000 Info tab will also give you troubleshooting information. You should see the on-hook and off-hook voltage level of the SPA2000. You may also see information about the last pstn number dialed.
On the SPA2000, you would need to have it registered with a voip provider, or else have it set to Make Call Without Reg before it will accept an incoming call from the FXS port.
Message Edited by hw on 02-02-2009 06:02 PM

Hi! I'm using a Macbook Pro, and my photo booth stopped working! I just updated my software yesterday, but it still doesn't work!! The green light does go on though, any suggestions on how to make it work?

Hi! I'm using a Macbook Pro, and my photo booth stopped working! I just updated my software yesterday, but it still doesn't work!! The green light does go on though, any suggestions on how to make it work?

In what way is it not working?
Please describe in detail all you have attempted to do in order to resolve the issue.

RdbmsRealm - how to make it work

I was running the example server. I would like to see if I can delegate the security to an rdbmsRealm. I followed the instruction from the documentation. I created the three tables for security in Oracle 8i Lite in my NT machine. I then startup the example server and created a security realm for my oracle 8i tables. I then selected the cacing realm and selected my oralce 8i Lite realm. However, this does not change the security because the new users that I created are still updated in the filerealm.properties file.
My understanding is that we should be able to use the oracle realm I just created for the wls realm. As for the caching realm, I thought it's there for performance reasons.
Could somebody tell me how to make it work? Thanks.

Hi Susan:
I followed you instruction and modified the config.xml file to use the rdbmsRealm in that I set up in Oracle 8i Lite. I am using the Oracle 8i Lite driver to talk to the database. I then tried to create new users. From the console, it appears that the users are added successfully. However, the new users do not exit in the oracle 8i lite rdbmsRealm. They do not exist in the filerealm.properties file neither.
I then tried to use the cloudscape rdbmsRealm. This is achived by the following configuration in the config.xml file:
<CachingRealm BasicRealm="defaultRDBMSRealmForCloudscape" Name="defaultCachingRealm"/>
However, the realm initialization failed. Then I checked the definition for the cloudscape rdbmsRealm in the config file and found out that the schemaproperties entried are all chopped off. This is because of the bug you told me earlier.
I would like to get the cloudscape rdbmsRealm working first and then try to find out why the oracle 8i Lite rdbmsRealm did not work. Could you please send me the schemaproperties entries needed for the cloudscape rdbmsRealm? Thanks.
Helen
"Suresh Vallabhaneni" <[email protected]> wrote:
>
Hi Helen
Here is a sample of what you need in the config.xml. Modify to match your environment.
<Security
Realm="defaultRealm"
/>
<Realm
Name="defaultRealm"
FileRealm="defaultFileRealm"
CachingRealm="defaultCachingRealm"
/>
<CachingRealm
Name="defaultCachingRealm"
BasicRealm="defaultRDBMSRealmForOracle"
/>
SUBSTITUTE THE REQUIRED VALUES FOR THE RDBMS REALM
<RDBMSRealm
Name="defaultRDBMSRealmForOracle"
RealmClassName="examples.security.rdbmsrealm.RDBMSRealm"
DatabaseDriver="weblogic.jdbc.oci.Driver"
DatabaseURL="jdbc:weblogic:oracle:yourdatabase"
DatabaseUserName=""
DatabasePassword=""
SchemaProperties=""
/>
Let me know if you still have a problem.
thanks
"Helen Semus" <[email protected]> wrote:
Hi Suresh:
Yes, I was selecting the default cacherealm from the console.
I checked my config.xml for the exampe server. You are right. The schemaProperties attribute values are truncated. I guess I will have to manually modify my config.xml file to get it to work.
Besides making sure the attributes for the rdbmsRealm element correct, is there anyother element or attribute that I need to set to enable the rdbmsRealm?
Thanks.
Helen
"Suresh Vallabhaneni" <[email protected]> wrote:
Hi Helen
Are you trying to select the caching realm through console? There is a release note on this(http://www.weblogic.com/docs60/notes/issues.html#1029973) that selecting the caching realm through console will corrupt the config file. If you're doing otherwise, plz let me know.
thanks
"Helen Semus" <[email protected]> wrote:
I was running the example server. I would like to see if I can delegate the security to an rdbmsRealm. I followed the instruction from the documentation. I created the three tables for security in Oracle 8i Lite in my NT machine. I then startup the example server and created a security realm for my oracle 8i tables. I then selected the cacing realm and selected my oralce 8i Lite realm. However, this does not change the security because the new users that I created are still updated in the filerealm.properties
file.
My
understanding
is
that we should be able to use the oracle realm I just created for the wls realm. As for the caching realm, I thought it's there for performance reasons.
Could somebody tell me how to make it work? Thanks.

DVR with fms3 , how to make it work?

Hi
I am trying to look for documentation on how the DVR functionality is working in fms3. It seems that I need to implement som server-side scripting to make DVR even work. In Flash Live Encoder there is an option to Record DVR, but it when I press the button, all I get is:
Thu Apr 30 2009 13:15:38 : Start DVR command received
Thu Apr 30 2009 13:15:38 : Requested DVR command has been successfully issued to Primary FMS server for stream ob1stream
Thu Apr 30 2009 13:15:38 : Primary - Network Status: NetConnection.Call.Failed error Method not found (DVRSetStreamInfo).
Does anyone know how to make this work?
Best Regards Niclas

ok i'm back for a second......so uhhh....class is in session here is a basic example of a video encoder
use this to stream your video while recording.....what makes it record?and not live? this line here:
ns.publish("thefilename", "record");
the second parameter.....to make it stream live without recording it to file you change it to "live"....the first parameter is what you name your file...
after this you use your client player to connect to the same connection as outlined.....and to play the same file ..ie   stream.play("thefilename");
package
    import flash.display.*;
    import flash.media.*;
    import flash.net.*;
    import flash.events.*;
    public class SimpleEncoder extends Sprite
        var nc:NetConnection;
        var ns:NetStream;
        var mic:Microphone;
        var video:Video = new Video();
        var camera:Camera;
        public function SimpleEncoder():void
            NetConnection.defaultObjectEncoding = 0;
            nc = new NetConnection;
            nc.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
            nc.connect("rtmp://localhost/video/myvids");
        private function publishLiveStream():void
            ns = new NetStream(nc);
            ns.addEventListener(NetStatusEvent.NET_STATUS, netStatusHandler);
            ns.client = this;
            camera = Camera.getCamera();
            mic = Microphone.getMicrophone();
            if (camera != null){
                camera.addEventListener(ActivityEvent.ACTIVITY, activityHandler);
                video = new Video();
                video.attachCamera(camera);
                ns.attachCamera(camera);
            if (mic != null) {
                mic.addEventListener(ActivityEvent.ACTIVITY, activityHandler);
                ns.attachAudio(mic);
            if (camera != null || mic != null)
            // start publishing
            // triggers NetStream.Publish.Start
            // "thefilename" is the name of the file you use after you connect to stream in client player   stream.play("thefilename");
            ns.publish("thefilename", "record");
            else
                trace("Please check your camera and microphone");
            addChild(video);
        public function onBWDone():void
        private function netStatusHandler(event:NetStatusEvent):void
            trace(event.info.code);
            switch (event.info.code)
                case "NetStream.Buffer.Full":
                    break;
                case "NetStream.Buffer.Empty":
                    break;
                case "NetConnection.Connect.Success":
                    trace("Congratulations! you're connected");
                    publishLiveStream();
                    break;
                case "NetConnection.Connect.Failed":
                case "NetConnection.Connect.Rejected":
                   // trace ("Oops! the connection was rejected");
                    break;
                case "NetStream.Play.Stop":
                    break;
                case "NetStream.Play.StreamNotFound":
                    trace("The server could not find the stream you specified");
                    break;
                case "NetStream.Publish.BadName":
                    break;
                case "NetStream.Publish.Start":
        private function statusHandler(event:StatusEvent):void {
            trace("statusHandler: " + event);
            trace(mic.activityLevel);
        private function activityHandler(event:ActivityEvent):void
            //trace(mic.activityLevel);
        public function onFault(e:Object)
            //trace(e.info);
            //nc.close();
    }//end class
}//end package
thelegendaryghost

Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well

Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well

If you use an HDMI cable, the audiostream will be integrated, so there will be sound when using an HDMI cable!
Not necessarily. That only works as stated if you have one of the most recent MBP's that has a built-in HDMI port.
If the MBP only has a Thunderbolt or miniDisplayPort, you need an appropriate adapter cable and even if you use an HDMI adapter or cable to connect to your HDTV there is no guarantee it will carry audio. You have to determine if your specific MBP model supports audio out through its miniDisplayPort or Thunderbolt output, and whether the adapter does likewise.

Deleted itouch files using ifile from cydia. i restarted it but now it shows the apple logo and that is it... it doesnt respond. any ideas of how to make it work?

I restarted my itouch using the home button and top button...it restarted but it only shows the apple logo and that is it. I deleted all files from ifile and then it froze... any ideas of how to make it work again?

Discussions of hacked ipods is not permitted here.

I have unlocked iphone 5.i tried to use it with tmobile.it shows full network but fails to activate and shows sim invalid.how to make it work?

i have unlocked iphone 5.i tried to use it with tmobile.it shows full network but fails to activate and shows sim invalid.how to make it work?

Who was your original carrier; did you call them to ask them to unlock your phone, and are you aware of what their unlock policy is (THey may only unlock for international sims and not US sims

HT201343 My mac is OS X 10.6. has not airplay. how to make it work?

My mac is OS X 10.6. has not airplay. How to make it work?

OS 10.6 is Snow Leopard, which does not support Air Play. If you upgrade to OS 10.7 Mountain Lion (which is what you list in your category) then you may be able to use Air Play depending on the age of your computer.
See this document:
http://support.apple.com/kb/HT5404

Today my money is deducted Rs.60 when I try to download paid applications of any amount and I am getting message transaction declined, so why my money is deducted. I lost almost Rs 480 rupees . So how to get refund and how to make card working?

Today my money is deducted Rs.60 when I try to download paid applications of any amount and I am getting message transaction declined, so why my money is deducted. I lost almost Rs 480 rupees . So how to get refund and how to make card working?

Today my money is deducted Rs.60 when I try to download paid applications of any amount and I am getting message transaction declined, so why my money is deducted. I lost almost Rs 480 rupees . So how to get refund and how to make card working?

How to make tablesorter work for GroupedColumns??

Hi all,
I imported the class of TableSorter.java to my project. It automatically picks up my normal columns, they all can be sorted.
but the groupedColumns generated by the drag and drop table node into the design area wont pick up, even i set the property of "onAction" of the column to "Sort"(method) it wont sort the content for me.
how to make it work?
thanks

hi!
you can get lead selection in the action handler then inset your code for currentContextElement.
wdContext.currentContextElement().getTableSorter().sort(wdEvent, wdContext.nodeXXX());
thanks
vishal

How to make rss work

So, I'd like to get RSS working on my iMac. When I click on an RSS logo/button, I get the message "No associated application could be found." HUH??? Any idea on how to make RSS work??? In either Safari or Mail.

RSS has been removed from Mail and Safari in Mountain Lion, so you will need to use a thrd party application such as Vienna.

How to make MDM work?

Hi Guy,
I'm newbie for MDM.I already intalled it on my machine(Window Xp)but dunno how to make it work.
The installed components are MDM/Syndicator/Import server,Console/Import mgr/Data mgr/Syndicator.
Do I have to install any component else?And Can you guy give me any guides/documents/Posts how to make it work.Cause I have to demo it next week but right now still blank about it...
Thanks
Parinya.

Hi Jack,
For Demo Purpose,
1.Create few master records in R/3 Servers [ MM(Tcode MM01) /Employee(PA40) /Vendor(Xk01) /Customer(XD01) according to your MDM Repository(For Example "Products").]
2.Extract those master datas from R/3 Servers.
3. You will get the xml file of master datas.
4.Open the import manager and import the xml file into the MDM server.
5.In Import manager ,you need to map the records[Source Fields(Imported records) VS Destination Fields(MDM repository)].
6.Once you imported the record ,u can see the records in the MDM Data manager.
   We can Create/edit/Delete those records .
   We can merge the records for consolidation purpose.
   We can perform Data enrichments process   like Validation,Workflow,Assignments..etc.
7.Once cleaned the Master records,it is ready to distribute to R/3 servers.
8.Syndicator is used for sending data back to the R/3 servers
   Here also we have to do Mapping against R/3 servers.
   Using XI We can connect the R/3 Servers.
Hope u will understand this.
This is very simple example for MDC-MDH Scenario.
For futher learning on how to create a repository/Enrich the mater datas, go through reference documents in the Service Market place.
Best Regards
Devaraj PK

How to make it work please

Similar Messages

Maybe you are looking for