How to make itunes work on 600 x 480 monitor

I have an old monitor. Trying not to upgrade just yet. I installed Itunes, but I can't get to the whole page. It suggets a different ratio, but I can't change mine. It is 600 x 480. Is there a way to make Itunes fit that resolution?

I very much doubt it.

Similar Messages

TS1292 i got an itune card after I hit the pin in it show invalid number, so how to make it work?

I got an itune card after I hit the pin in, it show invalid number so how to make it work?

See Here > iTunes Store: Invalid, inactive, or illegible codes
http://support.apple.com/kb/TS1292

All songs in my iTunes library are listed twice. I have two copies of my library in two different locations. How do I make iTunes work with one copy of my library?

All songs in my iTunes library are listed twice. I have two copies of my library in two different locations. How do I make iTunes work with one copy of my library?

That is the way the iphone works.
You need to copy everything from your backup copy of your computer.

How to make iTunes recognize the music library in my external hard drive after instaIling Yosemite?

How to make iTunes recognize the music library in my external hard drive after instaIling Yosemite? I tried re-setting the media folder location, but it didn't work. What else should I do?

The issue is not related to the external drive. iTunes Match has difficulties matching tracks ripped fom CDs because they may differ slightly from the versions on sale in iTunes. You can try the match again. Otherwise do a search of this forum. There are already many discussions on this subject here that may help you.

How to make iTunes read the song's name/singer from the file's name itself?

Hi everyone,
So I have this file with songs from everywhere. I spent quite some time now to make sure that the structure of each file's name is as such : "Singer - Song name", hoping that everything would be read by iTunes accordingly. However, either iTunes read it well, or it didn't read it at all ("Singer - Song name" appearing in Title alone), or iTunes read the "media" of the file (ie. what the guy I downloaded it from wrote for it in the Preferences, which usually is in capital letters or with a bunch of weird underscores). As I'm OCD and need everything to be neat, I'm highly tensed right now. I really want everything to be neat and clear!
So, how do I make sure that iTunes reads the files' names such that it knows the structure is "Singer - Song name"? Thanks.

iTunes doesn't use file names to determine how music appears in your library, Rather, it uses metadata that is split between:
data elements that are embedded within the media files
data elements that are included in the entries in the iTunes database
No amount of reorganization, renaming or other manipulation at the file level will make any difference to how songs will appear in iTunes. Using your example:
the value of the track number element is 1
the value of the artist element is "Elvis Presley"
the value of the song name element is "Blue Suede Shoes"
Depending on how you configure iTunes then the file name is either:
completely independent of iTunes (i.,e., the file containing this song could be xyz.mp3)
dependent on the metadata managed by iTunes, (i.e., when you have these two options set:
then iTunes will set the file name to be 1-01 Blue Suede Shoes.mp3 where:
the file is in a folder called "Elvis Presley" (the name of the album)
that folder is in one called "Elvis Presley" (the name of the artist) which is in iTunes Media\Music
Going back to your question "How to make iTunes read the song's name/singer from the file's name" the answer is simple - you can't, as this is not how iTunes works. There are some third-party utilities that you can use to set some metadata element values based on parsing of file names which might be a useful first step. However, to use iTunes effectively you should really forget about / ignore file names - manage your media using appropriate metadata and allow iTunes to look after file names behind the scenes.

How to Make Itunes Recognize Foreign Characters in file names?

How to Make Itunes Recognize Foreign Characters in file names?
Any Body, please
DELL Windows XP Pro

That's not how it's supposed to work according to this: http://www.griffintechnology.com/support/italkpro/
By default, a playlist will be created in iTunes called "Voice Memos" and those files will be transferred there automatically. The files themselves can be found on your computer in your iTunes Music folder in Unknown Artist > Unknown Album.
It may be worth working through any trouble shooting articles on that site.
Regards,
Colin R.

How to make iTunes detect the new location of music files?

Hi everyone. I moved all of my music to a different location on my hard drive, and I changed the location in iTunes preferences, but it doesn't seem to detect this, so my library is empty now. I saved an itl, xml, and temp file as well, but I don't know what to do from here.
I also tried dragging the new music folder onto the "Library" entry in iTunes, and this added everything, but I no longer have my ratings, playlists or anything like that.
Is there some other way to have iTunes detect the new location? And can I get back my ratings and playlists?
Thanks.

iTunes doesn't use file names to determine how music appears in your library, Rather, it uses metadata that is split between:
data elements that are embedded within the media files
data elements that are included in the entries in the iTunes database
No amount of reorganization, renaming or other manipulation at the file level will make any difference to how songs will appear in iTunes. Using your example:
the value of the track number element is 1
the value of the artist element is "Elvis Presley"
the value of the song name element is "Blue Suede Shoes"
Depending on how you configure iTunes then the file name is either:
completely independent of iTunes (i.,e., the file containing this song could be xyz.mp3)
dependent on the metadata managed by iTunes, (i.e., when you have these two options set:
then iTunes will set the file name to be 1-01 Blue Suede Shoes.mp3 where:
the file is in a folder called "Elvis Presley" (the name of the album)
that folder is in one called "Elvis Presley" (the name of the artist) which is in iTunes Media\Music
Going back to your question "How to make iTunes read the song's name/singer from the file's name" the answer is simple - you can't, as this is not how iTunes works. There are some third-party utilities that you can use to set some metadata element values based on parsing of file names which might be a useful first step. However, to use iTunes effectively you should really forget about / ignore file names - manage your media using appropriate metadata and allow iTunes to look after file names behind the scenes.

The e mail tab at the left top corner of the Notes page in iBooks is inactive in my Ipad3 WiFi retina display. How to make it work?

The e-mail tab at the left top corner of the Notes page in iBooks is inactive in my Ipad3 WiFi retina display. How to make it work?

Stephane,
First off - great tutorial - will go through it tonight to make sure I have the same.
I have this setup too, however I am connected to the internet fine, but iTunes airtunes sharing does not appear at all. Any suggestions as to why or what I can try?
The Airport Express is setup to use Airtunes, and iTunes is too. When setting up the airport Exp, Airtunes worked but internet didnt. When i figured out the internet part, Airtunes stopped
Thank you

Ipod Classic 120g - How to make it work again? Was formatted by windows.

My ipod classic shows as "removable device" in the finder, but does not appear on itunes. The iPod was formatted as a mobile device on windows. How to make it work again?

Hello soraiaSP
Try putting your iPod classic into Disk Mode and then use iTunes to restore it. Then it should show up within iTunes to sync media across to it.
Putting iPod into Disk Mode
http://support.apple.com/kb/ht1363
Regards,
-Norm G.

Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well

Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well

If you use an HDMI cable, the audiostream will be integrated, so there will be sound when using an HDMI cable!
Not necessarily. That only works as stated if you have one of the most recent MBP's that has a built-in HDMI port.
If the MBP only has a Thunderbolt or miniDisplayPort, you need an appropriate adapter cable and even if you use an HDMI adapter or cable to connect to your HDTV there is no guarantee it will carry audio. You have to determine if your specific MBP model supports audio out through its miniDisplayPort or Thunderbolt output, and whether the adapter does likewise.

TS2634 I bought a composite AV cable with 30 pin connector at a proper apple store for my ipad 2 which no longer works now i have updated to ios7 - please advise how to make this work ?

I bought a composite AV cable with 30 pin connector at a proper apple store for my ipad 2 which no longer works now i have updated to ios7 - please advise how to make this work ?

I have the same problem.
Two similar discussions:
https://discussions.apple.com/message/23081658#23081658
https://discussions.apple.com/message/23281391#23281391
I have not yet seen any official response to the question: "Is the Apple AV Composite cable fully supported with 30pin connector devices upgraded with iOS7 - specifically ? - eg. iPad 2, iPhone 4, iPhone 4s"
If it is not currently supported is that then due to a bug / oversight and in that case is it something that will be fixed in the near future?
Please let us know what feedback you got from asking Apple support.

How to make buttons work in Interactive Adobe Forms

Hi Experts,
I am new to interactive form. Though i have worked in normal/non-Interactive form, i do not know how to make buttons work in interactive adobe forms using ABAP (I don't know JAVA). Can any one help me out and walk me through to how to code in ABAP to make buttons work.
Kind Regards,
Sharat.

Please refer to my earlier post ... You will get an idea
Please refer to the below thread for detail solution
Sample Interactive form example ?....urgent...
Cheers
Satya

Deleted itouch files using ifile from cydia. i restarted it but now it shows the apple logo and that is it... it doesnt respond. any ideas of how to make it work?

I restarted my itouch using the home button and top button...it restarted but it only shows the apple logo and that is it. I deleted all files from ifile and then it froze... any ideas of how to make it work again?

Discussions of hacked ipods is not permitted here.

I have unlocked iphone 5.i tried to use it with tmobile.it shows full network but fails to activate and shows sim invalid.how to make it work?

i have unlocked iphone 5.i tried to use it with tmobile.it shows full network but fails to activate and shows sim invalid.how to make it work?

Who was your original carrier; did you call them to ask them to unlock your phone, and are you aware of what their unlock policy is (THey may only unlock for international sims and not US sims

HT201343 My mac is OS X 10.6. has not airplay. how to make it work?

My mac is OS X 10.6. has not airplay. How to make it work?

OS 10.6 is Snow Leopard, which does not support Air Play. If you upgrade to OS 10.7 Mountain Lion (which is what you list in your category) then you may be able to use Air Play depending on the age of your computer.
See this document:
http://support.apple.com/kb/HT5404

How to make itunes work on 600 x 480 monitor

Similar Messages

Maybe you are looking for