How to Make Link Open an Attached PDF?

I see in "Link Properties" and "Actions" that there is an option to "Open a file"; but when I select this, and click "Add"--I am not given the opportunity to link to the other PDF file that is already attached to the PDF file that I'm working on.
I know this can be done, just don't see how right now.
Thanks.

Have the Attachments pane open so that you can see the attached PDF(s).
Using Acrobat's Link tool lay down the link annotation (the 'box' you create) over the text string of interest.
In the Create Link dialog use "Go to a page view".
Click "Next".
The "Create Go to View" dialog presents itself.
Leave it for the time being.
Go to the open Attachments pane. Select the desired PDF. Right click and select "Open Attachment".
Back to the "Create Go to View". Now, click "Set Link". 
The "Create Go to View" dialog removes itself.
You're now observing the PDF that has the attached PDF(s).
Note that the PDF to which you linked is also still open.
This will be the case for each attached PDF you link to.
So, as part of the clean up ---
Do a Save As to the PDF having the attached PDFs.
Close the other PDFs.
Good to know.
The default for the link(s) will open the target, attached PDF while closing the "source" PDF that contains the attached PDF(s).
You can edit each link in the "source" PDF to configure "Open in" --
--| Window set by user preference
--| New window
--| Existing window
Open a link's properties. Select the Actions tab. Click the Edit button that is under the Actions 'window'.
Be well...

Similar Messages

  • How to make links open in new window

    Is it Javascript? How do you make links open in a new
    window.. what's the code and where do you put it, how do you end
    it?

    Target box (below link box0) to "_blank"
    "BenMan 88" <[email protected]> wrote in
    message
    news:e7v4it$jfj$[email protected]..
    > Sorry, this is totally unnecessary and I hope it doesn't
    irritate anyone
    > but thank-you this posting helped me very much.
    >
    >

  • How to make link open in new TAB and not new window

    Mac users can do the following...
    http://www.switchingtomac.com/tutorials/how-to-force-safari-4-to-open-links-in-a -new-tab-instead-of-a-new-window/
    how can this be done for WIndows users?
    Using Safari 4.0

    I'm not totally sure what you mean, because unless you are talking about not having to right-click a link first, that is prasisly what I do. the link you provided I just right clicked it & clicked on "open in new tab" ,& that's what it did.
    - But now because that was so easy to answer, I can only assume you mean not actually having-to right-click a link to open it up in a new tab. ,hope this helped.

  • How can I use terminal to make links open in same window the default behaviour, as it was in Safari 5.0, How can I use terminal to make links open in same window the default behaviour, as it was in Safari 5.0

    In Lion, the default of pressing a link on a web page, is to open the page in a new tab. In itself, I do like this because this is what I did for 19 out of any 20 links, which I command+clicked in previous Safari versions.
    However, there is a snag to this behaviour. Most (all?) secure site do not like links to be opened in a new tab. For example, when I am doing Web banking, The the linked page doesn’t open in new tab. Rather I get a page telling me my login session is expired. Probably a security measure instituted by my bank.
    I since found out, that a command-click opens lings in the same window. Theoretically that solves the problem, if I would think about this all the time. I don't. Old habits die slowly.
    Is there a terminal command to make links open in same window the default behaviour, as it was in Safari 5.0.

    Hi Eric,
    I got it figured out today, basically you have to load the Parallel Flash Loader first into FPGA ram. It is a special .sof file (pfl_epXXXX.sof) based on your FPGA. Code is actually pretty straight forward, using the Sys Exec VI. Use the windows based programmer to generate the .cdf file that identifies your FPGA, attached Flash and .pof file .
    Syntax was odd going into Sys Exec. Note the extra "C" in in front of the "quartus_prm.exe" I have no idea why that was needed, but I was getting an error until I just happened to put it in there (Blind Luck :-))
    I used a 2 element array going into a four loop
    cmd /cquartus_pgm.exe -c USB-BLASTER -m JTAG -o P;pfl_epXXXX.sof
    cmd /cquartus_pgm.exe -c USB-BLASTER -m JTAG S_FPGA.cdf
    Defining the working director C:\altera\12.1sp1\qprogrammer\bin
    And added match string with "Successfully performed operation" on the output in the loop to make sure everything loaded correctly then adding the array to give me a overall P/F
    To anyone doing this same thing Altera's documentation is poor to say the least. It took most of a week to figure this out Not allowed to upload code, so anyone wanting details just post here and I will try to help. This was painful, with lots of lessons learned.
    Thanks for the interest though
    Best regards John

  • How do i make links open in a new tab

    Hi There,
    Can someone please tell me how to get iWeb to set pages to open on a new tab when links are clicked.
    Like when someone is viewing my website, I want the links in that website to open in a new tab within the web-browser when someone clicks on them. I know I can make links open in a New window but how do I make them open in a new tab.
    Thanks a bunch
    Jason

    There is no HTML command to open windows in tabs.
    Only these commands are available :
    target="_blank"
    target="_top"
    target="_new"
    Opening a new page in a tab is decided by the browser preferences.
    In Safari : Preferences > Tabs

  • How can I make links clickable on all PDF viewers/readers?

    I have an InDesign document that's been built to be 'interactive' when printed as a PDF: along the top of each page are links that allow you to skip ahead in the document to specific pages. The links are created using boxes over the relevant text that are set up in an alternate layer of the Indesign document. The links just take the reader to a specific page of the PDF - not to an element on a page. There are minimal images - one on the cover and a logo on every page. It's mainly text.
    The links open in the PDF when viewed in Acrobat, and also on on Mac Book (it looks great!), but they don't open on iPads or other devices (and it looks like a complete dud when viewed this way). Are there some settings I can change/use to make my document 'clickable' from all readers?
    I'm very far ahead with this project and need to publish it urgently. I wasn't aware of this issue previously. Any suggestions/solutions gratefully received. Just to clarify - the links are mostly internal. I just need people to be able to jump around within the document.

    You cant transfer interactivity to a PDF when you print to PDF as you have written.
    PDFs have to be exported so that interactivity will live inside the PDF. Of course you have to set up links in the Hyperlink Panels.
    But not every reader is supporting interactivity. URL are supported from Reader and Apple iBooks. But you can't force the user to use a certain application anyway.

  • How to make links in dynamic text?

    Hi All,
    I need to know how to make links in dynamic text. I have
    created a
    table to hold the dynamic copy, and the copy is added through
    a CMS page
    that I created. This Admin page is accessed through a
    browser, and I
    don't know how to attach a link to selected text within a
    browser. Can
    anyone point the way? It's probably so easy I'll feel dumb.
    Thanks,
    Brett

    "Brett" <[email protected]> wrote in message
    news:fpf7j6$23m$[email protected]..
    > Thanks Hunter,
    >
    > Yes, I suppose a legend on the admin page would provide
    a solution. And
    > ultimately, if the client doesn't feel confident doing
    writing the HTML
    > they would have to pay me to do it for them. OK, that
    works for me.
    The only other thing might be to use something like FCK (or
    one of the many
    others... ContentSeed, I think is one Murray mentions often)
    for the CMS,
    that would give an easier option for the end user. WebAssist
    has an
    FCK-based plug-in called iRite that can give a more
    wordprocessing-like feel
    to the field (i.e., they could just highlight the text and
    then click a
    button to add the link).

  • How to make movies open in the center of my screen.

    Does anyone know how to make Quicktime open up videos in the center of a screen? When I double click any movie file it pops open in the uppermost far left corner, and I have to drag it down into a more comfortable area. It's annoying with a large monitor.
    Thanks
    noodle--head

    The script writing lobe of my brain was damaged by years of drug abuse, years ago. Try as I might, I can't seem to get it right.
    The most common error I get is:
    Expected end of line, etc. but found “end tell”.
    I tried modeling one of any number of existing scripts but still no dice.
    I tried this:
    tell application "QuickTime Player"
    activate
    set the bounds of window 1 to {235, 58, 944, 590}
    end tell
    And got this error message: QuickTime Player got an error: NSReceiverEvaluationScriptError: 4
    I know this is simple but, like I said...
    nnooo-dlehead ssslowto catchon

  • How to make Firefox open automatically a new, empty tab in each start, but keep last sessions?

    How to make Firefox open automatically a new, empty tab in each start? (keep last sessions as well) It will be good, because Firefox wont load the previous sessions last watched tab after start straight away, but keep my previous sessions tab as well in the browser.

    Hello,
    You can change your home page settings to open a blank tab:
    * Tools (or [[Image: New Fx Menu]]) > Options > General
    * Beside "Startup", change to "Show a blank tab"
    * See the article [[Startup, home page and download settings]] for more information
    To retrieve your previous browsing session, first make sure that you are not running in [[Private Browsing - Browse the web without saving information about the sites you visit|Private Browsing mode]]. When you start Firefox, to recover your previous session, you can go to:
    * History (or [[Image: New Fx Menu]] > History) > Restore Previous Session
    * Please see [[Restore previous session - Configure when Firefox shows your most recent tabs and windows]] for more information

  • How to make Finder open automatically...?

    How to make Finder open automatically when I insert external drive?

    Make sure the Finder preferences are set to display hard drives:
    OT

  • IWeb • How Do I Make Links in an Embedded PDF Document Open in New Page?

    On this page http://ostyn-newman.com/Gov_Downloads.html I have a PDF document that is embedded.  I tried an IFrame, but everything seemed to work better for me with the "Embed" code.  I am open to changing this if it would be better.  Here's my problem.  I can get the PDF document to display fine, but when I click on the links in the PDF document, the destination page opens in the embedded window.  I want the links to open the destination in a new window.
    I created the part of the document with most of the links (Pages 8.5 - 56) in Numbers and cut and pasted the table into a Pages document to create the completed document on our site.  I exported the docuemnt from Pages as a PDF file which is what you see.  There is also a link to download the file on the same page which works just fine.
    I have tried to insert the target="_blank" code but have not been able to get it to open the destination pages in a new window.  I am inserting the code by using the Insert/Widget/HTML Snippet Feature in IWeb.  Here is the code I am using.
    <embed src=
    "http://ostyn-newman.com/Media/GS27F0026XTextfile.pdf"
    style="width:850px; height:1000px;
    border-width:0px;
    border-color:#FFCC66;
    border-style:solid;"
    scrolling="auto" >
    </embed>
    I am not a coder and have just used Google to find the code to cut and paste and have played around with it to get to the place I am.  If anybody can tweak the code I have or offer some totally new code for me to insert that will get this to work would be greatly appreciated.
    Please keep in mind that most of the people who visit and use this page are government employees and are almost exclusivey using Explorer. 

    Thank you Jeff,
    I tried your original suggestion and now my inserted html widget reads
    <embed src=
    "http://ostyn-newman.com/Media/GS27F0026XTextfile.pdf"
    style="width:850px; height:1000px;
    border-width:0px;
    border-color:#FFCC66;
    border-style:solid;"
    scrolling="auto" target="_blank">
    </embed>
    It is live on my site.  You can see that the embedded document still opens the destination links in the embedded window.
    As for your other two suggestions, thank you as well.  I am aware of those techniques and did not use them because that is not how I want the other PDF links on the page to behave.  The catalog and autocad blocks downloads in the box at the top should simply download (or behave however the client's browser is configured to handle downloaded PDF documents or zip files.)  I don't intend to force those to open a new window.  I could also have our client click on a link to the PDF document and open it in a new page (like in your second suggestion) but I was hoping to embed the PDF and have it automatically viewable on our Download • Terms • Prices Page with all of the PDF search functions intact as well as the links be active.  My only complaint at this point is that the links in the embedded PDF document open the destination page in the embed window instead of a new window.  I only want to force a new window because the destination window doesn't behave properly when it opens in my embed window and it is difficult to figure out how to go back to the my PDF document when a destination window gets opened in the embed window.  The code you sent didn't do the trick.  Or maybe I didn't get it exactly right.  That is why I included it above.  Thanks for trying though.  I appreciate the effort.
    I would be willing to bypass the imbed/iFrame route altogether if I could just somehow drop the Pages document into the IWeb page and retain the search and link features, but I've not been able to figure out how to do that.  When I was exploring how to directly drop a Pages document into an IWeb page is when I stumbled on the method of embedding a PDF document into an IWeb page to retain the important search and link features.

  • How do make link between query and UDF

    How do you link a query to your UDF after you created the query and the UDF?
    Also do you have to set the UDF as type "general", and "link"?
    Please take me thru step?

    oh good - a discussion about whether to use "link" or "image" when having an image connected to a product!!!
    Billy and Suda - We had fun with this one some time ago in a project collecting additional data and images for the customer's products on the market.  As we were ramping up the project, we tried both ways of connecting an image to a product and there was a few drawbacks we found with using the UDF type of "General" and "Image":
    1.  The image was placed directly on the UDF portion on the Item Master - they were working in large TIFF (?) formats and the picture just looked horrible.  The approving manager could not tell if the image should be approved for press or not.  When he double-clicked on the image in the UDF portion it brought up another SAP window that wasn't quite crystal clear.
    2.  The image took up so much room on the UDF portion of the Item Master that the data entry personnel had to constantly scroll down to enter the other data points (color, size, branded promo, mixture, etc - there were about 12 fields).  Talk about being ticked!
    3.  While using the "General" and "Link" it addressed those concerns BUT there was one extra enormous advantage with this General/Link method.  When the image was brought up, it opened up the image automatically in a standard picture editor/manager program.  If they liked what they saw, they continued foward with the approval of the image for press runs.  If they did not like the image, they were able to manipulate the image at the moment and then follow through with approval (time saver for sure!).
    I am sure it all boils down to what the customer requirements are, but some other clients I demoed this to wanted to switch immediately after seeing that!  But definitely something to think about if you are planning on connecting an image to a product...
    Oh and she really is correct, Billy - I have never heard of anyone linking a query to a "link" or "image" type...I don' t know how you would even do that as the "link" or "image" selection leads you directly into the attachment and/or storage path and location...
    take care - Zal

  • How to make 'always open in ... view' check box actually work?

    What I need is a "Make 'Always open in ... view' check box work" check box.
    Specifically:
    I double click on my hard drive icon to open its window. I press command 3 to make it display in column view. I press command J and check "Always open in column view" and check the further check box, "Browse in column view". Then later on having viewed various windows I double click on the hard drive icon and it opens in some other view than column view. So, how to make the check box do what it actually says it will do?
    Thanks.
    edit: In fact in Panther, and probably other older OS X's, all folders would generally remember (I think) how it was last viewed and use that again. How to make that happen? Thanks.

    Hi,
    For Question #1,
    refer this link.
    Hope it helps!
    Thanks,
    Avni Bhatt
    If this helped you resolve your issue, please mark it Answered

  • How to make only part of a PDF document editable?

    I'm looking to see if there is a way to make only part of a PDF document editable. My problem is, I have pieces of collateral that some of our channel partners need to be able to add their logo to and then edit the contact information on them, but we don't want them to be able to change any of the main copy on these documents. The only thing I've been able to come up with as a solution is to create outlines of the text that I don't want editable, but I need the copy to be able to be read by computer systems for disability purposes. Does anyone have any ideas on something I could do for this? Or has anyone dealt with anything like this? Any help would be greatly appreciated!

    Hi vward26,
    You can use Acrobat to make only part of a PDF document editable.
    Kindly refer this FAQ:http://tv.adobe.com/watch/acrobat-x-tips-tricks/how-to-convert-just-part-of-a-pdf-file/
    Regards,
    Florence

  • How to make blank copies of a PDF file and put it into the printer tray.

    Dear experts,
    Before you try printing the data from the FM, How tomake several blank copies of the PDF file  and  put it in the printer tray so that you can print just the data from the function module on it??????
    Please reply.

    Hi drredwood,
    When you open your PDF file a yellow bar will appear on the top of the screen.
    Click on 'Enable All Features'.
    Then you will be able to copy the content from your pdf and to paste in any of the file.
    Regards,
    Florence

Maybe you are looking for