How to make LIS Extractor nightly full load

Hello All,
We need an LIS Extractor to be a full load. It appears Full Load only reads setup tables. How can we do a full load for a LIS Extractor?
Thanks!

Hi All,
Here is our scenerio:
I am referring to the LO Cockpit.
We have deltas coming over to a DSO that has a key of order number, material and batch. Now, when the order is created, for example, it will have batch NULL because we have not determined what batch to use yet. It could remain like this for days. In the meantime this record comes over to BW...just fine and updates. Now, we have decided for this order that exists in BW with a batch of NULL that we allocate a batch to it now. Now this record comes over to BW and it creates a new record. So we have 2 records in BW, one with batch NULL and one with batch updated. We really only want to see the record with batch updated.
We also thought about, what happens if we assign a batch (after the record came over to BW as batch NULL), then this creates 2 records as mentioned above and then now we change this batch to yet another batch. Now when this record comes over to BW this order will have 3 records by batch, yet only the latest is valid.
So we thought a full load would work, which it would. How do you handle such a scenerio for deltas? We load to DSO as mentioned and then push to a Cube.
Thanks

Similar Messages

How to make delta possible on full load datasources

Hi All,
What would be best option to enable delta to existing business content DataSource like in Project systems:
0PS_DAT_MLS -- Dates milestones
Is there any options?
Any help greatly appreciated.
Best Regards,
Reddy.

Hi,
one option would be to figure out the underlying table(s) and either:
1- identify a field like changed date/tiem or timestamp or number in order to create a generic datasource delta enabled on such field.
2- create a message type / change pointer monitoring changes on the relevant fields you want to load; finally create a generic datasource based on a function module reading and resetting your custom change pointer.
hope this helps...
Olivier.

How to make sure the maps are loaded though nokia ...

Hi,
I have downloaded new nokia map v.3.0109 to my nokia E75 and loaded maps by using nokia map loader (Asia).
but still I cant see the all regional map which I downloaded, without usign live internet connection.
How to make sure the maps are loaded properly to my mobile ?
with regards
Moderator's note: Email address removed. It is not wise to publish your personal information on a public forum.
Message Edited by myn1126 on 27-Jan-2010 07:54 AM

Hi,
I have downloaded new nokia map v.3.0109 to my nokia E75 and loaded maps by using nokia map loader (Asia).
but still I cant see the all regional map which I downloaded, without usign live internet connection.
How to make sure the maps are loaded properly to my mobile ?
with regards
Moderator's note: Email address removed. It is not wise to publish your personal information on a public forum.
Message Edited by myn1126 on 27-Jan-2010 07:54 AM

How to change Delta Datasource to Full Load?

Hi All,
I have an issue in my report which has Inbound Datasource (customized) from EKES and GRn from VBFA customized datasource.
Currently,
EKES is FULL UPDATE*
VBFA is DELTA UPDATE
My Scenario steps:
Step1:Inbound Created --EKES
Step2:GRn done--VBFA
Step3:Grn Reversed--VBFA
Step4:Inbound Deleted.--- EKES
So When the user deleted the INBOUND after REVERSAL, my EKES is full update, so it doesn't capture the deleted INBOUND based on our Datasource design to FILTER the AVAILABLE INBOUND. by type selection.
so before deletion GRN done in STEP 2, which is alreadt pushed to BI and after deletion of Inboubd GRN from VBFA is DELTA UPDATE, it doesn't capture the Deletion data...
In order to remove the deleted INBOUND from VBFA Infoprovider, I am planning easiest way to do FULL UPDATE...
May what are the precaution and steps to convert the DELTA update to Full UPDATE?
My flow 2PSA(EKES & VBFA)>2DSO(frm EKES & VBFA)->CUBE--->MultiProvider
Pls provide a good suggestion.

Hi ,
I mean to say, losing data in the sense..Once I do Full LOAD, will there any chance I miss data.
Also correct my below steps, if I am wrong,
1.Delete data from Target and PSA.
3. Run setup table-----HERE MY CONFUSION comes....my datasource is 0FI_GL_14. IT IS A FI datasources and this is not LO Method to do SET UP TABLE... or no need this step
2. Create Info Pak with FULL UPDATE.and run the Info pak
3. then run the DElte infopak, how the delta is set up..?
May I know what are the steps for FULL Update for FI?.
Thanks!

How to make safari open in full screen in Mountain Lion

I can not make safari open in full screen mode since I upgraded to Mountain Lion
It used to open in full screen mode, now every time I have to make it full screen each time.
Helps appreciated
Salih

gunafly wrote:
You can achieve this by going into system preferences>general>uncheck "close windows when quitting applications." The apps will open fullscreen next time, even after a reboot. One caveat, the window will open in the last session left...
Hope this helps!
Thank you, this resolved my question as well.

GX60 3CC - GPU driver bug (it makes the GPU go full load in standby)

Hi, I have a GX60 destroyer with the R9 M290X, and it runs games awesome, but there's a problem, sometimes the GPU goes full load when I'm doing nothing (Temperature: 75 C), after trying some things in the CCC and power options, I decided to uninstall the AMD drivers (it's the same with the drivers from MSI and from AMD), and in the uninstalling process the GPU went from 75 C to 50 C, after that I reinstalled the same drivers and the GPU went to normal temperatures (45 C or less), after one week the same happened, it takes 15 mins to reinstall the drivers but anyway maybe there's a fix.

I'm wondering if you can get your hands on a different Power Supply to slave in if that HD doesn't turn out to be the problem.
I'd also check the 4 pin cpu power plug (I'm pretty sure that's what it's for... ).
Mine wasn't fully seated and I ended up with a month or so of random boot/no boot issues every time I moved the case.
Simple things, but who knows, sometimes it's just that second set of eyes or hands we need to find the problem.
Good luck!

Issues with a customized extractor running 'Full' loads.

Hi Gurus,
Is it possible to check at what date/time a particular data record has been posted in the VBPA table [Sales Document Partner Function Table]?
My issue is that we have a customized extractor that pulls data from both the VBAP & VBPA tables based on VBELN [Doc No] & POSNR [Item]. We are using an 'Inner Join' on these two tables, so if either the Doc No or Item is not present in the VBPA table at the time of extraction, the data record will be skipped and we are facing several such missing documents in BW.
The loads are 'Full' based on 'ERDAT' & 'AEDAT' on the VBAP table for the last 3 days i.e. if a Sales Document is either Created or Changed in the last 3 days, it will be picked up by the extractor. So my reasoning for the missing data records in BW is that the VBPA table entries for that particular Order had been updated at a later date and hence data was missed out during extraction [because of the 'Inner Join' based on Doc No & Item].
But since VBPA does not have a created on or changed on field, I am unable to find out when exactly a data record has been updated in the VBPA table.
Any suggestions that you can provide will be highly appreciated!
Thanks

Hi,
I feel your table join logic is not correct. Please discuss with your functional team once and try to revise the logic. Otherwise you may keep missing some records all the time. Test the extractor alot in RSA3 before replicating in BW.
Regards,
Suman

How to make OMS try to re-load XML files marked as error

Hello,
we have a lot of XML files marked as errors due to the OMS had been unable to load them becouse a full TS.
Now that de TS has been extended, how can we force the OMS loader to retry loading all those XML files???. Is there any method to do it??.
Thanks in advance.

Hi,
>>>
Now, after the form has been open for several weeks and I have collected a number of responsed (hence, made a number of assignments) I've been asked to get 2 volunteers for most assignments (I was only getting 1 volunteer per assignment initally). I now need to reopen/re-display all of the assignments that I marked as an error but they are no longer visable on my form.
Can I bring them back? If so, how?
You can go back to "Design" Tab and add the options back to your choice fields. For example, if your choice field options are "Blue", "Yellow", "Red", and you deleted "Red", you can add "Red" back to the choice field options (you should be able to add additional new options as well). In "View Responses" Tab you should not see the error mark anymore.
Hope this helps,
Thanks,
Lucia

How to make Firefox 8.0.1 load only the home page when starting?

After upgrading to 8.0.1, I see two tabs being loaded when starting - my home page and this http://www.mozilla.org/en-US/firefox/central/. I dont find a setting to not load mozilla page.
This happens only when the first instance of firefox is started. If I start another firefox, it loads only the home page tab.

-> Update Firefox to the latest version 10
* [[Installing Firefox on Mac]]
* [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
Check and tell if its working.

If full load is there in infopackage if u want delta how to load with out d

if full load is there in infopackage if u want delta how to load with out deleteinng request under same infopackage

Hi ,
One point i would like to make you clear,using full load Ip you can't load delta
for which you need to create one more IP
And now to load delta,you need to check some prerequisites:
http://help.sap.com/saphelp_nw04s/helpdata/en/44/97437799ee70dbe10000000a1553f6/frameset.htm
chek the abobe link for step by step instructions
Cheers,
Swapna.G

Full load to Delta conversion of standard extractor

Hi Gurus,
Data have been loaded to Infocube from standard extractor( LO LIS) as a full load.Now I needs to convert full load to delta.Kindky throw your ideas, what are the points I have to be considered .
Thanks
Siva

HI,
For getting the Delta u have to first Initlize the Cube. the option is available at InfoPackage level.
After that only u can get the Delta.
that is only the Way.
Assign Point if it helps.
Regards,
sandeep

How do I make a contact photo full screen when receiving a call

I know this feature went away in iOS 7.1 and turned into the small round bubbles but it appears to have returned in iOS 8 and Apple is advertising it on their site in the Yosemite pictures. Does anyone know how to make my contact photos full screen again?
Scroll down to Continuity: http://www.apple.com/osx/

There isn't a setting but there is a trick (at least on earlier iPhones but I suspect the 6 as well). For the photo to be full screen it must be a photo taken on the iPhone and still resident there. If you import the photo to a computer, delete it from the phone and then sync it back via iTunes, it will not display full screen. If the photo was taken on a previously owned iPhone and transferred to your new 6, it will not display full screen. If it is any consolation, I think the circular pictures are better when placing a call as the full screen ones aren't very visible behind the outgoing call screen, at least with my settings.

How to make pictures on the iPhone 5 in full screen?

Photograph on the iPhone 5. When viewing the photos on the iphone 5 at the bottom and top of the screen black bar. How to make photos to be full screen?

Hi Nimesh,
Just add the adddition default 'X' for the first radio button .
Syntax :
PARAMETERS : button1 RADIOBUTTON GROUP r1 USER-COMMAND m1 default 'X'.
Reward points if useful
Thanks & Regards,
Basha

How to make it full screen

Hello
I have made a slide show and I will be showing it threw a projector and I do not know how to make the slide show full screen.
So how do i make the show be full screen?
Thanks
Greg Wyatt

hey there Greg & welcome to Discussions.
connect the projector to the Mac using the appropriate adaptor & cable, open System Prefs. > Displays > Detect Displays > Gather Windows. set rez for the projector & turn off Mirror. that's how you play your slideshow "through" the projector.
good luck.

LO Extractor's Full update Functionality

Hello All,
I have some few questions regarding the FULL UPDATE functionality of LO extractor.
Till now I was under the assumption that FULL UPDATE will bring all the current data from ECC, but we had a requirement to make a LO extractor (for e.g. 2LIS_02_ITM) has a full update in the info package.
But this is just pulling the data from the Set up tables, hence the newly posted data is not coming to the BW system. If this is the case, then why we have Full Update functionality for the LO extractors?
Does Full update only works for the FI extractors?
Please let me know your ideas,
Thanks,

Hi Ram,
in all the scenarios of LO and LIS, the full update is only accessed from Setup tables.
The deltas are retreived from base tables subsequently.
In case of non LO and LIS extractors the full updateas well as delta is fetched from base table.
If you want latest data aswell to be pulled from ECC then there is no other go, other than filling the set up till that point and perform a full load from BI.
Naveen.A

How to make LIS Extractor nightly full load

Similar Messages

Maybe you are looking for