How to make logical link visible in workcenter group (not type AA, BB, CC)?

In Marketing Workcenter MKT-MKT-WCC there are 5 assignment blocks with grouplinks. Except the classified link groups (AA=Create, BB=Search, CC=Reports), there are 2 non-classified groups.
How to add a Z-link in these assignment block.
When we create a new Z-group, add Z-links and make them visible in the businessrole, they don't appear. Only when we set the Z-group to classified, for example Create, the link becomes visible.
Please advise,
Toine

Hi Toine
If you create a Direct Link Group(including direct links with pos number), then
assign the same to your Nav Bar Profile with some position number.
If you do this, then by default Direct Link Group will be visible in the Business Role
but, the links under the Direct Link Group will be invisible. So make the Direct links
under the link group to visible and then relogin.
It should work 100%, because i have already done the same.
Please let me know with the steps you are following if it is still not working.
Thanks
Arun

Similar Messages

How to make downloadable links in Adobe Muse

I am new to website design and am trying to figure out how to make downloadable links for some PDF flyers, PSD templates I am creating. Not sure if "downloadable links" is the correct term for what I'm trying to say but in a nutshell I am creating Business Flyer's in PDF form and Photoshop PSD template files that I would like to be able to have my users click a link that allows them to download them right to their desktop. Any help would really be appreciated!

Hi caybar10gaming,
I had the same question as you and was searching online for how to add "downloadable links" as well so your not alone in that lol. Anyways, I found this video that explains how to do this. I hope this helps you, as it did me. Good Luck
http://tv.adobe.com/watch/muse-feature-tour/add-and-link-to-any-type-of-file/
-Caitlin

How to make a link to an image in flash?

Hi,
I´m new in Flash CS3 and I´m trying to get some
answers to my problem.. The question is
that how do I create a link to an image in flash??
I know how to make a link to a text field but I really
don´t know how this could get working properly.. :/

Link to an external URL image? In AS 2 the code is
'getURL("putaddresshere")' and in AS 3 it's 'navigateToURL("")' ...
If it's a simple image, it's easier just to import it to the
stage, save it as a symbol, put it in a timeline frame and then
code your link so on click or rollover it goes
'gotoAndPlay(framenumber)'.

How to make the library visible IN AN EXTERNAL disk?

Hello.
Searched this forum (found about 25 identical questions and answers "how to make the library visible").
I turned mine and it is constantly visible now.
Before installing Lion made a bootable image.
When I connect the external HD, I see it in the Finder side bar, click on users>myname and the library folder doesn't show up.
Tried the 3 ways to make it visible but they all bring back and show the Lion's library on my MBP, not the one in the external HD.
Any ideas?
(BTW, I am just an "amateur user", not too heavy, so just, please take in consideration that if you explain to me slowly I will understand quicly)...
Thanks in advance.
Saul

Thank you Baltwo.
Don't I know you from CCC? (If judging from your answer I do, always hit the nail in the head)...
Yes, I guess I used the wrong terminology. Anyway, I did a bootable disk/image/clone, however it's called, with CCC (Carbon Copy Cloner), which BTW I am using for at least 3 years and saved several times my behind.
So, if I understood you right, you mean booting from my external HD and make the library visible (I don't remember if the clone was made after installing Lion or still while in Snow L, but will check).
I'll try and update here if it worked.
Thanks again and have a good evening.
Saul

How to make a link page come up in seperate window

Am not sure how to make a link page to anther site for
insatance come up in seperate window so that they do not navigate
away from my site.Thanks Tony

Select the item you want to use as a link. In the property
inspector, type
in the full path to the website you want to link to and set
the Target to
_blank.
Nadia
Adobe� Community Expert : Dreamweaver
http://www.csstemplates.com.au
- CSS Templates | Free Templates
http://www.perrelink.com.au
- Web Dev
http://www.DreamweaverResources.com
- Dropdown Menu Templates|Tutorials
http://www.adobe.com/devnet/dreamweaver/css.html
"chesterarebest" <[email protected]> wrote
in message
news:e88357$ifp$[email protected]..
> Am not sure how to make a link page to anther site for
insatance come up
> in seperate window so that they do not navigate away
from my site.Thanks
> Tony

How to make a link in textflow that send parameters to a function?

How to make a link in textflow that send parameters to a function?

In the examples included with the weekly builds there is a CustomLinkEventHandler.as example. Passing parameters would be done in the CustomClickHandler function. You could attach the parameters to the LinkElement as user styles using the setStyle API.
Hope that helps,
Richard

How to make relative links

Hello.
I need your help.
Inside the public_html folder I have two files one index.dir and part1.dir The file (index.dir) I wanted to do html and I do the Regulating through public settings
My problem is that it will link files? I do not know how to do it and I want your help please.
How to make relative links?
Information my project test:
Script from index to part1
-- DESCRIPTION --
on getBehaviorDescription me
return \
    "GO NEXT BUTTON" & RETURN & RETURN & \
    "Moves the playback head to the next marker when the user clicks on the sprite." & RETURN & RETURN & \
    "PERMITTED MEMBER TYPES:" & RETURN & \
    "Graphic members" & RETURN & RETURN & \
    "PARAMETERS: None"
end getBehaviorDescription
on getBehaviorTooltip me
return \
    "Use with graphic members. " & \
    "Moves the playback head to the next marker on mouseUp."
end getBehaviorTooltip
-- HISTORY --
-- 3 November 1998, written for the D7 Behaviors Palette by James Newton
-- 5 January   2000: updated to D8 <km>
on mouseUp me
go frame "test1" of movie "pat1" -- test1 is Maker and the file is part1.dir
end mouseUp
on isOKToAttach (me, aSpriteType, aSpriteNum)
tIsOk = 0
if aSpriteType = #graphic then
    tIsOK = 1
end if
return(tIsOK)
end on
script from part1 to index
-- DESCRIPTION --
on getBehaviorDescription me
return \
    "GO PREVIOUS BUTTON" & RETURN & RETURN & \
    "Moves the playback head to the previous marker when the user clicks on the sprite." & RETURN & RETURN & \
    "PERMITTED MEMBER TYPES:" & RETURN & \
    "Graphic members" & RETURN & RETURN & \
    "PARAMETERS: None"
end getBehaviorDescription
on getBehaviorTooltip me
return \
    "Use with graphic members. " & \
    "Moves the playback head to the previous marker on mouseUp."
end getBehaviorTooltip
-- HISTORY --
-- 3 November 1998, written for the D7 Behaviors Palette by James Newton
-- 5 January   2000: updated to D8 <km>
on mouseUp me
go frame "Intro" of movie "index" -- Intro is Maker and the file is index.dir
end mouseUp
on isOKToAttach (me, aSpriteType, aSpriteNum)
tIsOk = 0
if aSpriteType = #graphic then
    tIsOK = 1
end if
return(tIsOK)
end on
Please help
Look my page for you to understand my problem www.ionio.gr/~aleksgeor

It looks like you have taken a behavior from the Library Palette and hard coded it to suit your needs. This was unnecessary. Instead try the following behaviors attached to buttons that take you between movies - assuming they are in the same directory:
on mouseUp me
gotoNetMovie("@/part1.dcr#test1")
end
on mouseUp me
gotoNetMovie("@/test.dcr#Intro")
end
Also, you should Shockwave-compress your files to DCR (see the Publish Settings) in order to make your movies as small as possible so they download quickly

Can you explain me clearly how to make company code visible in cost center

can you explain me clearly how to make company code visible in cost center master data using tcode kmlv

Hi,
There is no way to activate the company code field. If your Controlling Area and Company Code have one to one Assignment, then Company code is defaulted from the Controlling Area. However, if multiple Company Codes are assigned to one Controlling Area, then Company Code becomes a mandatory field in the Cost Center master data
Also, in case you have multiple company codes assigned to one controlling area, please check the setting of the Controlling Area in Configuration and see if have selected "Cross Company Code Cost Accounting" . Also, check if you have assigned all the company codes to the controlling area
Regards
Mahendra

How to make email link with a button with AC2 in flash cs3?

How to make email link with a button with AC2 in flash cs3?
I wrote this, but it does not work:
btn_emailinfo.on (release) {
getURL("mailto:"[email protected]");
}

I am guessing you put that on a frame?
If so, the syntax is as follows:
btn_emailinfo.onRelease = function(){
getURL("mailto:[email protected]");
Though, if you are placing it directly on the button itself,
the syntax is:
on(release){
getURL("mailto:[email protected]");
}

How to make the link between the technical version and the packaging vers.

Hello,
Does anyone know how to make the link between the technical version number and the packaging version number ?
For exemple, I can download on the SAP Market Place the version B1iSN 8.8 PL7 but if I look into the B1iSN the version information, it returns B1iP_3.0_SP04_HF03.
This is quite confusing.
Thank you.

Hi Gordon,
In fact this information is usefull for me. I was looking for a customer installation but he did not remember which version was installed. They are facing some problems. So I don't know if I have to update B1iSN or not to solve it.
B1iSN returns only the technical version number, but I would like to know which version was downloaded from the Market Place.

How to make a function return number(10,0) data type (ORACLE 10g)?

With 10g, how to make a function return number(10,0) data type?
here is the function, it returns a number type :
create or replace FUNCTION Get_portfolio_Id3 (p_HistObjTable In Varchar2,p_LHISTOBJID IN NUMBER) RETURN view_cpu_STD_Asset.LPORTFOLIOITEMID%Type IS
v_Id view_cpu_STD_Asset.LPORTFOLIOITEMID%Type;
BEGIN
If p_HistObjTable ='amPortfolio'
then v_Id:=p_LHISTOBJID ;
elsIf p_HistObjTable = 'amComputer' then
select litemid into v_Id from smcdba.amComputer c where c.LCOMPUTERID=p_LHISTOBJID ;
else v_Id:=-99;
End If;
RETURN v_Id;
END Get_portfolio_Id3;
Thanks.
Message was edited by:
user631701

create or replace FUNCTION Get_portfolio_Id3 (p_HistObjTable In Varchar2,p_LHISTOBJID IN NUMBER) RETURN view_cpu_STD_Asset.LPORTFOLIOITEMID%Type IS
v_Id view_cpu_STD_Asset.LPORTFOLIOITEMID%Type;
BEGIN
If p_HistObjTable ='amPortfolio'
then v_Id:=p_LHISTOBJID ;
elsIf p_HistObjTable = 'amComputer' then
select litemid into v_Id from smcdba.amComputer c where c.LCOMPUTERID=p_LHISTOBJID ;
else v_Id:=-99;
End If;
RETURN round(v_Id);
END Get_portfolio_Id3;

How to make a list item field with DATE data type?

I have a column with DATE data type. Using forms 6i I want to generate a poplist list item field with this column while the value of the elements in the list to will be day names like SATURDAY,SUNDAY,MONDAY. if we change the data type from date to char, it will work properly but now with DATE data type behind it, it gives the following error message
"FRM-32082: Invalid value for given item type.
List WEEKREST
Item: WEEKREST
Block: EMPRESTS
Form: MODULE3
FRM-30085: Unable to adjust form for output."
Using forms 6i how to make a list item field with DATE data type which can hold day names?

Set your date column as a hidden (non-displayed) field. Create your list item with the varchar2 day names. Create the list item as a non-base-table field that accepts the text values of day names. On that field, create a when-validate-item trigger that translates the text into a real date, which it then uses to set the value of the actual base-table item.

Hello guys! Do you know how to make a video smaller on imovie? Not by size or trim, i mean simply show the video as small as possible in the middle of the screen! Please text back.

Hello guys! Do you know how to make a video smaller on imovie? Not by size or trim, i mean simply show the video as small as possible in the middle of the screen! Please text back.

Go to the Map, Background & Animatic Browser (last button in the centre tool bar alongside the Transition button). Drag the Black background (or any background) to your project. From an Event, drag the video selection directly onto the Black clip in the project. As you drop the video clip, a pop-up menu will appear. Select Picture in Picture.
Your video will appear as a small picture within the black clip. Click on it and reposition it to the centre of the viewer, using the yellow guide lines to get the exact centre position. Resize the Picture in Picture if desired by dragging the corner handles.
NOTE: You may need to extend the duration of the Black clip to match the duration of the video clip. Double-click on the Black clip to open the Inspector, then adjust the duration there.
John
Message was edited by: John Cogdell - added NOTE

How to create logical link for report and make that available in webui

Hi All,
Please mention the steps to creae logical link for standard report(BI) or customized report and assiging it to work center,
Thanks,
priya

There is a good guide available from SAP: service.sap.com/crm-inst
It goes into most details you would want to know on including BI reports.
The path is SAP CRM > SAP CRM 2007 > CRM WebClient UI
cheers Carsten

How to make a link in a report open a Form in a different region of the same page ?

Hi,
I developped a report and a form for the same table. I also created a link and used it in my report so that when I click on the link of one record, the form is opened and display this record.
My problem is that when I include my report as a portlet and I click on a link, the form is opened in full screen mode by replacing the page containing my report.
What should I do in order to open this form in another region of the same page ?
Thanks a lot

I presume that the two regions are working fine with their individual buttons and your issue is how to make them both save with one button.
Here is how
a. You will have 2 ApplyMRU and 1 ApplyMRD processes for each of the regions. Right? Lets say you have 2 "Save" (i.e. label=Save) buttons, one has name SUBMIT and the other SAVE ( SUBMIT and SAVE being the requests that will be sent when they are clicked , respectively)
b. Make the Display condition on one of the buttons 'Never'. Now it won't show when you run the page. Lets say you made SAVE's conditional Display 'Never'
c. Go and change the condition on all ApplyMRU and ApplyMRD processes from "When Button Pressed" to "Request is contains in Expression1". In Expression1 enter SUBMIT,SAVERegards

How to make logical link visible in workcenter group (not type AA, BB, CC)?

Similar Messages

Maybe you are looking for