How to make LR remember the Crop Ratio

Is there a way to have LR remember a crop ratio so you don't have to always re-selected it again when you move to another image?
I needed to crop over a 100 photos to 5x7. I would select crop, then choose 5x7, adjust the crop to what I want, and move to the next image. The Crop ratio would be at the original, so I would have to re select 5x7 for every image. What am I doing wrong?

Select all 100 in Grid view, expand the Quick Develop panel, click the Saved Preset drop down, click the Crop Ratio drop down menu and apply 5x7.
Press R to jump to Crop mode and tweak composition as needed.

Similar Messages

How to make firefox remember the main web address of each website instead of it remembering URLs history?

Whenever you visit a website such as youtube.com and have searched for videos on the site, firefox remembers all these URLs the next time round you attempt to type youtube.com into the address bar. I find it frustrating because all I want to see is a neat list of websites beginning with the letter 'y' when I begin typing 'youtube' such as youtube.com or yahoo.com, etc. I don't want to see everything else otherwise it just looks messy - you end up having to click on one of the URLs to get to the site again or you end up retyping the main address out yourself (some main web addresses are long!).
Is there an option in firefox where you can have it only remember the main web address of the sites you have visited instead of all the URLs visited on those sites? I'm not talking about deleting the entire history, just for the address bar to remember a simple list of sites such as google.co.uk, yahoo.com, youtube.com, outlook.com, etc.
If something like this doesn't exist then I wish someone would give us the option to do that.

Pick a page you like for that site, then bookmark it. In the future,
just select the bookmark.

How to make Premiere remember the sequences in the sequence panel when re-opening the project?

I've got a project I've been editing on ( a feature film) which consists of 100 scenes which are roughly in 100 sequences plus about 100 more sequences from the dialies during the shoot. In the sequence panel I have usually a couple sequences open and of course the master. Then I save it, shut down Premiere, restart it and then later I load the project back in. The result is a complete random selection of sequences in the sequence panel (usually the old dailes) but never the ones I worked on when I saved the project. Anything I can do so that Premiere remembers which sequences I edited on when I saved it?

You did not state what version of PP you are using. However, this was a known issue and was fixed in the 8.2.2 update. What you have to do is create a new project file in 8.2.2. and import the entire project you are having the problem with then save.
Even though this issue was fixed in 8.2.2, just by opening and re-saving a project file will not resolve it. As stated, you have to create a new project file from within 8.2.2., import your current project then save. That will resolve it.

How to make Safari remember my password for sites whiteout promoting me? I mean i don't want to ask me if i want to save the password or not, just save it automatically to my keychain.

How to make Safari remember my password for sites whiteout promoting me? I mean i don't want to safari ask me if i want to save the password or not, can it just save it automatically to my keychain qhitout asking?

No. It's a safety feature. Select the appropriate response and the next time you visit, you won't be prompted.

Flip the crop ratio in camera/photos app?

In the new photos app, does anyone know how to flip the crop ratio, change it from say 2:3 to 3:2? This used to be simple in iOS 7 and earlier, and it's a common feature of photo apps (iPhoto, Aperture, Pixelmator, etc.), but it seems to be missing from iOS 8.
Let's say you want to do a portrait crop from a landscape photo using a set ratio like 5 x 7. In iOS 8 there appears to be no way to do this easily. You can flip the photo, edit it while on its side (not a natural view which makes doing a nice crop more difficult), then flip the photo back to its proper orientation, but that's a lot of unnecessary steps.
Am I missing an easy way to do this?

Good day!
I notice no difference to prior to 8.4.
But maybe the ACR Forum may be a better place for questions realted to ACR.
http://forums.adobe.com/community/cameraraw
Regards,
Pfaffenbichler

I have a $10 gift card balance on my Apple ID but when I try to rent a movie it wants me to use my debit card. How can Make it use the iTunes credit?

I have a $10 gift card balance on my Apple ID but when I try to rent a movie it wants me to use my debit card. How can Make it use the iTunes credit?

Hi ...
Select None for payment method > iTunes Store: Changing account information
Be aware, an auto renewing subsciption by require a credit card.

How to make use of the presentation variable in SQL result query

I have 2 prompts in my dashboard.
Prompt1 decides the values of Prompt2.
I have set a presentation Variable (selected_comp) in prompt1 which holds the value selected.
To populate the values for Prompt2, I need to execute a query using the presenation variable set by Prompt1.
SELECT "List Of Values".RID from rocketv2_3 WHERE "List Of Values".NAME='COMPONENT' AND "List Of Values".VAL=@{selected_comp}
the query is resulting into
SQL Issued: SELECT "List Of Values".RID from rocketv2_3 WHERE "List Of Values".NAME='COMPONENT' AND "List Of Values".VAL=0
but the value in selected_comp is "ABC".
Can anybody help in how to make use of the presentation variable in query to get the correct value
thanks
Shubha

Just use constrain check box to filter your 2nd prompt values based on the 1st prompt.
Thanks,
Venkat
http://oraclebizint.wordpress.com

How to make use of the FM EDIT_TEXT_FORMAT_DOC

Hi frnz,
How to make use of the FM
EDIT_TEXT_FORMAT_DOC
Could anyone explain with an example how to use this
regards

hi
I need an example please....
did any one use that FM
Regards

How to make iTunes recognize the music library in my external hard drive after instaIling Yosemite?

How to make iTunes recognize the music library in my external hard drive after instaIling Yosemite? I tried re-setting the media folder location, but it didn't work. What else should I do?

The issue is not related to the external drive. iTunes Match has difficulties matching tracks ripped fom CDs because they may differ slightly from the versions on sale in iTunes. You can try the match again. Otherwise do a search of this forum. There are already many discussions on this subject here that may help you.

How to make iTunes read the song's name/singer from the file's name itself?

Hi everyone,
So I have this file with songs from everywhere. I spent quite some time now to make sure that the structure of each file's name is as such : "Singer - Song name", hoping that everything would be read by iTunes accordingly. However, either iTunes read it well, or it didn't read it at all ("Singer - Song name" appearing in Title alone), or iTunes read the "media" of the file (ie. what the guy I downloaded it from wrote for it in the Preferences, which usually is in capital letters or with a bunch of weird underscores). As I'm OCD and need everything to be neat, I'm highly tensed right now. I really want everything to be neat and clear!
So, how do I make sure that iTunes reads the files' names such that it knows the structure is "Singer - Song name"? Thanks.

iTunes doesn't use file names to determine how music appears in your library, Rather, it uses metadata that is split between:
data elements that are embedded within the media files
data elements that are included in the entries in the iTunes database
No amount of reorganization, renaming or other manipulation at the file level will make any difference to how songs will appear in iTunes. Using your example:
the value of the track number element is 1
the value of the artist element is "Elvis Presley"
the value of the song name element is "Blue Suede Shoes"
Depending on how you configure iTunes then the file name is either:
completely independent of iTunes (i.,e., the file containing this song could be xyz.mp3)
dependent on the metadata managed by iTunes, (i.e., when you have these two options set:
then iTunes will set the file name to be 1-01 Blue Suede Shoes.mp3 where:
the file is in a folder called "Elvis Presley" (the name of the album)
that folder is in one called "Elvis Presley" (the name of the artist) which is in iTunes Media\Music
Going back to your question "How to make iTunes read the song's name/singer from the file's name" the answer is simple - you can't, as this is not how iTunes works. There are some third-party utilities that you can use to set some metadata element values based on parsing of file names which might be a useful first step. However, to use iTunes effectively you should really forget about / ignore file names - manage your media using appropriate metadata and allow iTunes to look after file names behind the scenes.

How to make restriction for the description of value in the transformation

one infoobject AAAA which has value T001, T002, T003...
the description of value
T001 - Heywemay
T002 - Heyrtya
T003 - Tyuatyew
I need to make routine in the transformation, when the description of value that contains "Hey", then we need to load it into infoprovider, otherwise we need to delete data package. Now the issue is the filed in source is only Key, not description. But, we had maintained the description for infoobject AAAA. Anyboady know how to make restriction in the transformation, ?
that means we only need to load data into infoprover once the description of value that contains "Hey". Should I add field 0TXTMD into infoprovider and make the link from infoobject AAAA? Thanks for any input.

Hi,
Write the Start routine to delete complete data packet whic won't have "Hey".
DELETE SOURCE_PACKAGE WHERE TXTMD NP '"Hey'.
If you want load the data with blank for that InfoObejct if it won't contains "Hye".
Write this code at TXTMD infoObejct level.
if SOURCE_PACKAGE-TXTMD NP 'Hey' .
RESULT = ' '.
elseif SOURCE_PACKAGE-TXTMD CP 'Hey' .
RESULT = SOURCE_PACKAGE-TXTMD.
endif.
Note: In the above code I'm giving logic to do the same, but for code corrections please check with ABAPer.
Thanks
Reddy
Edited by: Surendra Reddy on Aug 12, 2009 10:48 AM

How to make iTunes detect the new location of music files?

Hi everyone. I moved all of my music to a different location on my hard drive, and I changed the location in iTunes preferences, but it doesn't seem to detect this, so my library is empty now. I saved an itl, xml, and temp file as well, but I don't know what to do from here.
I also tried dragging the new music folder onto the "Library" entry in iTunes, and this added everything, but I no longer have my ratings, playlists or anything like that.
Is there some other way to have iTunes detect the new location? And can I get back my ratings and playlists?
Thanks.

iTunes doesn't use file names to determine how music appears in your library, Rather, it uses metadata that is split between:
data elements that are embedded within the media files
data elements that are included in the entries in the iTunes database
No amount of reorganization, renaming or other manipulation at the file level will make any difference to how songs will appear in iTunes. Using your example:
the value of the track number element is 1
the value of the artist element is "Elvis Presley"
the value of the song name element is "Blue Suede Shoes"
Depending on how you configure iTunes then the file name is either:
completely independent of iTunes (i.,e., the file containing this song could be xyz.mp3)
dependent on the metadata managed by iTunes, (i.e., when you have these two options set:
then iTunes will set the file name to be 1-01 Blue Suede Shoes.mp3 where:
the file is in a folder called "Elvis Presley" (the name of the album)
that folder is in one called "Elvis Presley" (the name of the artist) which is in iTunes Media\Music
Going back to your question "How to make iTunes read the song's name/singer from the file's name" the answer is simple - you can't, as this is not how iTunes works. There are some third-party utilities that you can use to set some metadata element values based on parsing of file names which might be a useful first step. However, to use iTunes effectively you should really forget about / ignore file names - manage your media using appropriate metadata and allow iTunes to look after file names behind the scenes.

Can any body tell me how to make changes in the print layout of Fb03.

hi,
Can any body tell me how to make changes in the print layout of Fb03.
I want to add comapny address on the layout.
Regards
Mave

If you mean the correspondence, you have to change the configuration in Financial Accounting -> AR and AP -> Business Transactions -> Outgoing Invoices -> Carry Out abd Check Settings for Correspondence. There, you need to assign your custom Program or Layout for the Correspondence Type (like SAP19) and Program.
If you mean the display layout in transaction FB03, You can change a few settings, mainly with BKPF and BSEG fields. I don't think you can add company address, though.
Good luck,
Bhanu

How to make password for the printer to prevent coping paper from other s

i have ( hp officejet pro 8600) how can i prevent others from making copies of paper . when i am outside . i mean how can i lock the printer itself

iTunes doesn't use file names to determine how music appears in your library, Rather, it uses metadata that is split between:
data elements that are embedded within the media files
data elements that are included in the entries in the iTunes database
No amount of reorganization, renaming or other manipulation at the file level will make any difference to how songs will appear in iTunes. Using your example:
the value of the track number element is 1
the value of the artist element is "Elvis Presley"
the value of the song name element is "Blue Suede Shoes"
Depending on how you configure iTunes then the file name is either:
completely independent of iTunes (i.,e., the file containing this song could be xyz.mp3)
dependent on the metadata managed by iTunes, (i.e., when you have these two options set:
then iTunes will set the file name to be 1-01 Blue Suede Shoes.mp3 where:
the file is in a folder called "Elvis Presley" (the name of the album)
that folder is in one called "Elvis Presley" (the name of the artist) which is in iTunes Media\Music
Going back to your question "How to make iTunes read the song's name/singer from the file's name" the answer is simple - you can't, as this is not how iTunes works. There are some third-party utilities that you can use to set some metadata element values based on parsing of file names which might be a useful first step. However, to use iTunes effectively you should really forget about / ignore file names - manage your media using appropriate metadata and allow iTunes to look after file names behind the scenes.

How to make Illustrator remember color settings?

Hello!
The quick color selector in the main toolbar (fill and stroke) always resets their thumbnail sizes whenever I quit Illustrator.
I use a 27" monitor and prefer large thumbnails in my fill and stroke palette in the toolbar - but is there no way to make Illustrator "save" the settings when I change it to large thumbnails?

Can't help you but just to confirm that this is the case (I'm using CS5 Win7). No way to make Illustrator remember the settings - they programmed it as bad as it is and I don't think there is a way at least using the UI.
You can use this link to post a feature request http://forums.adobe.com/community/illustrator/illustrator_feature_requests although I think this can be considered as a bug.
by the way, it is called the Control panel which by default is the horizontal bar under the main menu - the Toolbar is the vertical bar with tools on the left side.
Alternatively meanwhile you can increase the size of the swatches in the Swatches panel which luckily Illustrator remembers.

How to make LR remember the Crop Ratio

Similar Messages

Maybe you are looking for