How to make lumia 920 detected as USB mass drive ( as flash memories) instead of MTP

i need to know How to make lumia 920 (running windows phone 8.1) detected as USB mass drive ( as flash memories) instead of MTP

For help using Windows Phone please post on the Windows Love forums on http://answers.Microsoft.com
The developing for Windows phone forum is for developers to discuss writing their own Windows phone apps.

Similar Messages

  • How to make linux bootable off a usb stick on mac

    Guys i was wondering how to make linux bootable off a usb stick on mac, since i dont have a optical drive in my mac, plus i need it for university

    I have the same question, but parsed differently.  What people have tried answering here is:
         how to (make linux (bootable off a usb stick on mac))
    What I'm trying to find is:
        how to make ((linux bootable off a usb stick) on mac)
    That is, I don't want to boot from the usb stick on my mac; I want to write an ISO to a usb stick that's plugged into my Macbook Pro (Mavericks), then carry the stick to a different machine (several discarded Windows boxes in fact), plug it in there, and watch it boot on that machine.  I've done a bit of googling, but everything I find talks about making USB drives with content that can be booted on a Mac.  What I'm wondering is if it's possible to write to use my Mac to write bootable USB gadgets that work on other machines that aren't running OSX software.
    Anyone know if this is discussed anywhere?  If not, what's the right forum to ask it on?  And how do I ask it so that I don't get yet another explanation of how to make something that will boot on my Mac?
    I have several linux ISOs waiting.  Actually, I could do the job on one of several available linux boxes.  But I'd like to do it on my portable laptop, which at the moment is this Macbook Pro.

  • How to make Adobe as your default viewer for all your PDF file instead of the Preview given? Thanks

    How to make Adobe as your default viewer for all your PDF file instead of the Preview given? Thanks

    you need to "Get Info" on the file first. Select it, right click and select 'Get Info' in the menu.
    In the window that pops up, near the bottom, the "Open With" drop down menu needs changed. If the drop down menu does not present the one you want, select "Other" and find it.

  • How to make email link with a button with AC2 in flash cs3?

    How to make email link with a button with AC2 in flash cs3?
    I wrote this, but it does not work:
    btn_emailinfo.on (release) {
    getURL("mailto:"[email protected]");
    }

    I am guessing you put that on a frame?
    If so, the syntax is as follows:
    btn_emailinfo.onRelease = function(){
    getURL("mailto:[email protected]");
    Though, if you are placing it directly on the button itself,
    the syntax is:
    on(release){
    getURL("mailto:[email protected]");
    }

  • IMac cannot detect ANY usb mass storage device.

    iMac Core 2 Duo (White) cannot detect ANY usb mass storage device including iPod. Only Mice and Keyboards work via usb. Any solutions? OS X shows absolutely nothing when any usb device is connected.

    Try resetting the PRAM. Hold down Option-Cmd--P-R together at the startup chime. Wait for two more chimes, total three, then let go to finish booting.
    Try an SMC Reset. Shutdown, unplug from power, wait ten minutes, still unplugged, hold power button in for five seconds. Reconnect to power.
    Run the Hardware Test in extended.
    http://support.apple.com/kb/ht1509
    Tried a different USB port, tried a different device besides the iPod?
    Some other ideas
    http://reviews.cnet.com/8301-13727_7-10328879-263.html

  • How to connect Lumia 920 with PC Suite

    Hi,
    I downloaded and installed latest Nokia PC Suite on my WIndows 7 machine. While connecting my Lumia 920 with USB cable to my system, it shows "Quit the transfer mode from phone if you want to use the phone with PC Suite"
    I have not been able to find this option in the phone anywhere.. I want to connect and backup my contacts and sync alot of sother stuff as well. 
    Can anyone please guide me as to how to do this.

    Vaihtaja wrote:
    I don't want to synchronize to ANY cloud. I want to synchronize to my own PC. Must I return back to my N8?
    No, but you wil llimit your phone options and features.
    If you are away from home and your phone bricks or gets damaged you have no way of recovering until you get back home. By using the cloud your can access your data anytime, anywhere and your phone and backup data are always in sync without you needing to do anything. If that is not what you want by all means go ahead and try THIS (there are other options.. go Google it)..
    You will also HAVE to own/use Outlook for any of these to work.
    There are plenty of posts around here which can give you more info on this.
    Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

  • How to make the WTR 610N external (USB) storage port my network common BackUP point..

    My networked PC's (XP Pro & VISTA Ultimate OS's) are set up to share those Folders & files I've selected for BackUp.  I intend to connect a 600 Gb ext HD to my WTR 610N Ext Storage port.  I hope a simple instruction (Move to...;Copy to...; even  Point & drag) will suffice to create the BackUp.  What commands should I use to select location and name of that special BackUp port.?

    How to Make my Macbook Pro's internal HDD external, when I get a SSD?
    Get an externel enclosure at the same time.
    You can order from OWC
    http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
    Put the SSD in the externel enclosure and use something like Carbon Copy Cloner,  to clone the internal drive and all it content to the SSD.  Then swap them out.
    Always good to have more than one backup.

  • How to make my computer send all the audio through optical audio cable instead of headphone jack?

    Howdy,
    To listen to online radios or CD's played from my computer, I used to connect the computer to my home entertainment system from the computer's headphone jack to the AUX port on my home entertainment system.
    I now wanted to get better sound and purchased the optical audio cable. However, I don't know how to tell my computer to send the audio signal to the home entertainmeny system through the optical digital cable rather than through the headphone jack. If I just unplug the cable connecting the headphone jack and the AUX port and only have the PC and the system connected with the optical audio cable, I don't hear any sounds. I suspect the computer isn't sending any data through the optical audio port. I'm not able to find how I can adjust the settings on my computer so that from now all sounds are output through the optical audio.
    1) I'd like to do that mainly for my HP desktop (configuration below) and any advice on how to do that would be appreciated.
    2) I also have a HP laptop (configuration below) and was wondering if that would be doable too (even though it doesn't appear to have a audio out, but it has HDMI out - can one convert it to optical audio?
    Thanks in advance!
    My desktop is: 
    ENVY h8xt,
    • Windows 8 64
    • 3rd Generation Intel(R) Core(TM) i7-3770 quad-core processor [3.4GHz, 8MB Shared Cache]
    • 12GB DDR3-1333MHz SDRAM [3 DIMMs]
    • 1TB 7200 rpm SATA hard drive
    • No secondary hard drive
    • 1GB AMD Radeon HD 7570 [DVI, HDMI, DP, VGA adapter]
    • 300W Power supply
    • SuperMulti DVD Burner
    • Wireless-N LAN card (1x1)
    • 15-in-1 memory card reader, 2 USB 2.0 (front), 2 USB 3.0 (top)
    • No Additional Office Software
    • No additional Security Software
    • No TV Tuner
    • Beats Audio (tm) -- integrated studio quality sound
    • HP USB volume control keyboard and mouse with Win 8 keyboard
    • Adobe Premiere Elements & Photoshop Elements 10
    And the laptop:
    HP ENVY 15t Quad    
    • Windows 8.1 64
    • 4th generation Intel(R) Core(TM) i7-4700MQ Processor
    • NVIDIA(R) GeForce(R) GT 740M Graphics with 2048MB of dedicated video memory
    • 15.6-inch diagonal Full HD BrightView LED-backlit Display (1920x1080)
    • 8GB DDR3 System Memory (1 Dimm)
    • 1TB 5400 rpm Hard Drive
    • 24GB flash Hard Drive Acceleration Cache
    • No Additional Office Software
    • Security Software Trial
    • 6-Cell Lithium-Ion Battery
    • No Internal DVD or CD Drive
    • Standard Keyboard
    • HP TrueVision HD Webcam w/ integrated digital mic
    • 802.11 AC WLAN and Bluetooth(R) [2x2]
    This question was solved.
    View Solution.

    Hello @_goma,
    Welcome to the HP Forums, I hope you enjoy your experience! 
    I have read your post on how you are looking to make your computer send all the audio through an optical audio cable instead of the headphone jack, and I would be happy to assist you in this matter!
    To configure your desktop to enable the optical audio cable, I recommend following the steps below:
    Step 1. Click the Windows Key Button on your desktop
    Step 2. Type "Control Panel"
    Step 3. Select "Control Panel" in the top right-hand corner
    Step 4. Select Sound
    Step 5. Under the Playback tab, right-click the white area below the devices available
    Step 6. Select "Show Disabled" and "Show Disconnected Devices"
    Step 7. Connect your Optical Audio Cable
    Step 8. Select your Optical Audio Cable as the default device and click "Enable"
    Since it is not possible to convert the HDMI out to audio out on your notebook computer, it is unfortunate that the notebook is not able to connect with an optical audio cord.
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • How do I install Lion onto a USB thumb drive or SD card

    Hi, folks..
    I'm not asking about how to create a Lion installation thumb drive or SD card, or copy the recovery partition to a USB drive or SD card. I already have a backup Lion install thumb drive. What I am hoping to do is create a bootable Lion thumb drive or SD card on which I can also have Drive Genius and other utilities -- so I can boot from the thumb drive or SD card and work on my unmouted nternal hard drive.
    Is it as simple as installing Lion onto the thumb drive or SD card, or is there more to it than that?
    I've tried searching for this, but everything I've found has been about creating an install SD or thumb drive.
    Thanks in advance!

    Okay, so I ran the Lion Install app and directed it to install onto my USB thumb drive. Everything looked like it was doing what I wanted, and since the screen showed that it would take about 17 minutes I stepped away for about a half-hour. When I came back my screen was off, and when I pressed a key the progress bar said it would take another 11 minutes. Huh? I went away again for another half-hour, and when I returned the progress bar hadn't moved -- still 11 minutes.
    Okay, I was working on a USB drive, no big thing. No keypresses did anything, so I hit the power button on my Mcbook Pro, shut the sytem down, then started it back up. It booted to a screen to setup Lion. Hmmm.... I shut the system down (this time from the Apple menu), pulled the USB thumb drive, powered back up, and ended up at the same place.
    I rebooted, this time holding the Alt key, and saw that my Macintosh HD had been renamed to something about install. Booting from that partition gave me no option but to complete a Lion installation.
    Thankfully I have a Time Machine backup, and the recovery partition worked, so my system is back up (although some of my preferences seem to have changed, even though my backup was current -- another "huh?").
    So, what did I do wrong?

  • How do install Windows 7 from a USB optical drive?

    I have a 27" 2013 iMac with no optical drive so I borrowed an Apple USB portable optical drive. How do I install Windows on BootCamp from the USB Optical drive?

    iirc, you won't be able to or at least you shouldn't, it will take much longer than using a usb install
    CHECKLIST
    use only a +8gb USB2 flash drive
    disconnect ALL devices except kb, mouse
    STEPS
    do a PRAM reset
    open disk utility, confirm you have 1 partition (‘mac HD’ unless you renamed it) and repair permissions TWICE
    dl a windows ISO
    insert your usb flash drive and open boot camp assistant, choose all options making sure you used the new ISO just dl'd
    if you get an error that the windows support software is unavailable, manually dl it here, put it on a separate USB2 drive and install by clicking setup.exe after windows is installed
    http://support.apple.com/kb/ht5634
    w7 ISOs
    http://techverse.net/download-windows-7-iso-x86-x64-microsofts-official-servers/

  • How to make the car just like in  the index of Flash cs5?

    I  am curious know how to make the car of the Flash cs5 index site ?
    Does it render from 3D model or we can create it from illustrator ?

    You need to make enough of an interface with JNI to let your app be a service... google a search on it and you'll find a generic JNI model to allow you to do what you want.

  • Lumia 920 overheating when running Here Drive+

    Any suggestions as to why my Lumia 920 overheats to the point of shutting down when trying to navigate with Here Drive+
    Doesn't matter if I have it running on battery power or via a Nokia DC car charger, same effect, it gets hot and then shuts down
    version 4.0.5410.0
    maps 8.30.51.121
    Lumia 920 WP8
    UK on o2
    Regards,
    Andy

    Similar issue with Lumia 920 (WP8) heating up when using Here Drive.  I've resorted to using it only for short amounts of time to avoid excessive heat buildup.  When I use Here Drive, battery life is significantly shortened also which is another reason why I don't leave it running during long drives.  If the phone does overheat, it tends to exit out of the Drive app and I sometimes I don't realize that Navigation has stopped working until I look at the phone!
    And no, I do not use live traffic data as I do not have a data plan on my phone.
    Lumia 920, Lumia 800
    Nokia N8-00 (NAM, Product Code: 059C8T6), Symbian Belle, Type RM-596, 111.030.0609
    Nokia 5800 XpressMusic (NAM, Product Code: 0577454) Software v51.2.007, Type RM-428

  • How do i change sharing & permissions on  USB HARD DRIVE???

    Hello i bought a mac mini 10.6.5 , and i have a simple tech 320g usb hard drive that i used to save pics, videos, etc. from my windows xp laptop. and i want to save pics, videos, etc from my mac to the USB DRIVE. and it and it wont let me!!!! when i go to the drive info it says under sharing and permissions (you can only read) can some one please help.

    The drive is formatted for Windows using NTFS. The Mac OS can only read NTFS, not write. You'll have to install something to allow writing, or format the drive as FAT32.

  • Does any one know how i can make my iMac detect my usb Alesis mixer 2.0

    Help

    Try this app
    http://itunes.apple.com/us/app/large-viewer/id400600005?mt=8
    Especially made for viewing PDF, TIFF, or images that have paper measurments in meters or yards...
    Other general purpose PDF readers fall over and die when the paper size goes over a meter or 36 inchs.

  • ¿How i make a Browser Detect swf movie?

    Hi, i use a simple embed swf movie in one of many pages i own, but recently I build a new page in html5. But i tested in Internet Explorer and doesnt work well. What i need its a script code in AS3 to use in my swf movie that detect the browser and if the browser its IE9 load an old page, but if its other browser is like mozilla or chrome, load  the new page in html5.
    It is possible to do that in AS3 right?
    Thanks to all
    Firefawx 

    You can simply say "I want an animation to play before it decides which page to load" and we'd get it. So you want to show your logo animation.
    Use the tutorial link I gave you and look at the code. It is a full example of browser detection using both actionscript and javascript. ActionScript needs JavaScript to get the information on what browser it is. All of the information and code examples are there to show you how to detect the browser.
    Spanish translation:
    Usted puede simplemente decir "yo quiero una animación para jugar antes de que decida lo que se cargue la página" y que sería para nosotros. Así que usted quieremostrar su animación de la insignia.
    Utilice el enlace tutorial que te di y mirar el código. Se trata de un ejemplo completo dela detección del navegador utilizando tanto ActionScript y JavaScript. ActionScriptnecesita JavaScript para obtener la información del navegador que es. Todos los ejemplos de la información y el código están ahí para mostrar la forma de detectar el navegador.

Maybe you are looking for