How to make MAC print to an network printer on a non default port.....

Hello
I have a Gestetner 3235PCL printer at the office. The printer is on IP address 192.168.1.10 using Port 9101.
I can't seem to find a way to make the computer print to anything but the default port.
Any ideas if this is possible using a Mac?

Bruce is correct, but be certain you select IP > HP Jetdirect-Socket. Then enter the IP address with the port number separated by a colon " : ".
You could also use the CUPS web page to add the printer. At the Device menu, select 'Appsocket/HP Jetdirect' and then at the Device URI menu, after socket you can enter the IP address with port 9101, such as
socket://ip_address:9101/
Do you know if the printer is using a Fiery controller? I know the Fiery's offer three ports alternate to 9100 so that you can connect to a specific queue. 9100 will print to whatever has been selected as the default queue in the controller config, such as print, while 9101, 9102 and 9103 are the direct, print and hold queues respectively.
Pahu

Similar Messages

ICal: how to make my print selections become the default

how do I make my chosen printer selections become the default? Also, is there a way to assign selections to a named type of "file", i.e, "My Calendars", "My To Dos", etc.?

If you leave a CD, DVD, or some disc with data, in the internal drive, it should then use the external drive for burning. If you use good blank discs, such as Verbatim, there should be no reason to reduce the burning speed.

HT201270 MORNING COMMUNITY, anyone know how to make the i4s forget a network - when the device won't give you that option?

MORNING COMMUNITY, anyone know how to make the i4s forget a network - when the device won't give you that option?

if you dont have the options to forget network you can reset your network settings, but than the device forget all networks
settings > general > reset > reset network settings

TA21087 Link to how to keep Mac printer sharing on, please?

This must have been answered many times: How to keep Mac printer sharing on?
Brother MCF-7340 drivers have been installed from original DVD.
Turning on printer sharing remains easy. But sharing goes away by itself.

Dr. S-
The iPad uses AirPrint for printing. AirPrint uses Bonjour data. Some WiFi routers do not handle Bonjour data correctly.
Two options:
1. New WiFi router. Apple's AirPorts and Time Capsules are known to work. My Cradlepoint MBR900 works. There are others, but I do not know of any compatibility list.
2. iPad App such as Print n Share.
(The option to run a program on your desktop computer that will share the printer over WiFi, may also require the router to pass Bonjour data correctly.)
Fred

How to make the Printer deskjet 3940 compatible with Windows 7, home basic, 32 bits?

I have HP Deskjet 3940 Printer. I recently purchased a Lenovo desktop( C320, 57-302429) which has Windows 7,home basic,32 bits operating system. The said printer does not work with the above computer. Please guide how to make this printer compatible with the above operating system.
This question was solved.
View Solution.

1. Click the Start button, click Control Panel and double click Devices and Printers.
2. Click Add a Printer.
3. Select Add a local printer.
4. Choose an existing USBx Local port, click Next.
5. Click the Windows Update button.
6. After the update finishes, search for the 3940 driver.
7. click Next,Next,Next,Next,Finish
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

How to make the APEX tree in the "Expand All" shape by default?

Could anybody please enlighten me on how to make the APEX tree in the "Expand All" shape by default please? I created an APEX tree and by default it's in the "Collapse All" shape. I am using APEX 4.1.0.00.21

Hi,
you can check the view source of html and check the onclick code written on that plus sign(Expand All), just copy that onclick javascript code and put it on page javascript event.
Thanks,
Jaydip Bosamiya
+91-76000 23053
http://jbosamiya.blogspot.com

How to find mac address of a client computer in specified time and port in WIFI WCS Control system

how to find mac address of a client computer in specified time and port in WIFI WCS Control system

WCS record-keeping is very crude.
You'll get the time/date when the client authenticated. You'll get the local inside address but you'll need the router to translate the outside IP address and the port.
You will need a proxy server to determine what sites did a wireless client goes.

How to use non default port 1521 while 11.2.0.1 grid upgrade to 11.2.0.2

Hi Team ,
We are planning 11.2.0.1 Grid infra rolling upgrade to 11.2.0.2 with out any downtime.
But while up gradation due to default scan port 1521 , 11.2.0.1 databases are not able to connect (remote connections)
We are using 1900 port for existing 11.2.0.1 grid infra scan.
While up gradation it is taking default port of 1521 insted of existing port 1900.
Please provide the solution to use non default port while 11.2.0.2 up gradation.
After upgrade the status as below.
grdoratst104:/apps/grid/grdhome:+ASM4> srvctl config scan_listener
SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1521
SCAN Listener LISTENER_SCAN2 exists. Port: TCP:1521
SCAN Listener LISTENER_SCAN3 exists. Port: TCP:1521
Here I was getting TNS:no Listener errors from the client connections.
I have modifyed the scan port then it is working fine.
grdoratst104:/apps/grid/grdhome:+ASM4> srvctl modify scan_listener -p TCP:1800
grdoratst104:/apps/grid/grdhome:+ASM4> srvctl config scan_listener
SCAN Listener LISTENER_SCAN1 exists. Port: TCP:1800
SCAN Listener LISTENER_SCAN2 exists. Port: TCP:1800
SCAN Listener LISTENER_SCAN3 exists. Port: TCP:1800
grdoratst104:/apps/grid/grdhome:+ASM4>
Here the problem is we need to do the grid infra upgrade with out downtime,but due this default port issue clients are not able to connect to the database.
Thanks
Bala
Edited by: user12032334 on May 31, 2011 11:46 AM

Why are you using a non default port? It does not improve security. It makes network management more complex. And causes the type of issues that you are facing now.
So before changing defaults, make sure that your reasons are technically sound. And using port 1900 when 1521 is available, is not technically sound by any means.
As for addressing the problem you have created for yourself by mucking around with port numbers. Use a NAT firewall (on each RAC node) to rewrite packets headers received on port 1900 and send these to the server's port 1521 instead (on the VIP or static IP as required).
This can be fairly easily done using iptables if your o/s is Linux. You need to:
a) create a pre-routing NAT rule
b) create a post-routing NAT rule
c) create a forwarding filter rule for port 1900/tcp
d) create an input filter rule to accept traffic on 1900/tcp

How to establish user equvalance between 2 rac nodes on non default ports??

Hi Friends,
Please shed some light on how to establish user equvalance between 2 rac nodes on non default ports such as ssh on 22...
i want to establish user equvalance on other ports..
Thanks
RB

R12DBA wrote:
Hi Friends,
Please shed some light on how to establish user equvalance between 2 rac nodes on non default ports such as ssh on 22...
i want to establish user equvalance on other ports..
Thanks
RBHi RB ,
22 is default port for ssh. For configuring
http://yasarmoran.wordpress.com/2010/06/12/configuring-ssh-on-oracle-rac-nodes/
For non default port , first of all you need to configure ssh on new port . For that refer :
http://www.itworld.com/nls_unixssh0500506

How to make Mac 8.6 support PCL 5e printer.

I share HP1100 printer in windowsXP. My mac 8.6 install the HP 1100 printer. But the printer is PCL 5e. I how to install the printer in Mac 8.6.
thank you very much for your help.

Disable the firewall in the Security & Privacy preference pane.

HT4356 How to make my printer compatible with my iPad 3

Hi , I have a Canon MG5250 printer that I want to make compatible with my iPad 3. Have heard I can do this with a plug in or an app,rather than having to buy another printer. Please can you help. Many Thanks.

How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
iPad Power: How to Print
http://www.macworld.com/article/1160312/ipad_printing.html
Check out these print apps for the iPad.
Print Utility for iPad ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
Print Agent Pro for iPad ($5.99) http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8 Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
FingerPrint turns any printer into an AirPrint printer
http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
 Cheers, Tom

How to make the print, email button work in PDF output

Hello,
I'm using LC Designer ES2 to create a xdp form with print, email and httpSubmit button. Then using LC server to generatePDF output, binding with xml dynamically. But after that I got the static pdf file and none of the button work,
I really need help on how to make it work. Any configuration, plug-in....
Thanks,

Hi,
This is solved by note 1281208.
Thanks,
Edited by: Zhijie Kong on May 24, 2011 6:06 PM

While using mac as wireless router ; How to make Mac sleep?

Hi all.
I set up my macbook to act as a wireless router [sharing it's wireless signal, via the "Sharing" settings in System Preferences]
using this guide
http://www.macinstruct.com/node/118
I am wondering how to make my mac sleep while this wireless-sharing setting is enabled?
Since I have enabled this setting, the mac will not sleep, however, the mac will sleep when I disable it.
I am also wondering ; [if it is possible to make the mac sleep while this setting is enabled], can I still use the mac as a wireless router even while it is asleep?
Or does it need to be awake to function as a router?
Thanks very much in advance for any help!

Thank you very much everybody for your answers.
Dominic23
and
BobTheFisherman
Yes, I kind of thought what you are saying would be the case.
It makes "sense" that when the computer is asleep, so are all it's functions,
but I *WISH* there was an option to keep the airport functioning even while the computer is asleep.
Bob, I don't think having the OPTION to leave the airport on while mac sleeps would defeat the power-saving feature of the computer (:
I know the "best" way to share wifi is with a router, but for me, a router just another piece of plastic I don't need. All I need to do is share wifi in a small space [my room] from my mac to my iPad and ipod touch.
I like to use my ipad as a reader, and when I am reading, I may be sitting down for many hours just reading from the ipad. It doesn't make sense to leave the mac running during these long periods just for a wireless signal, so I may sadly buy a router ):
Anyway, I get what you are all saying, and thank you for telling me the current limits of this function.
Cheers! (:

Very URGENT -- How to make keyboard print

This is very urgent. How to make the keyboard print?

Here is the code. It is supposed to make the keyboard type something.
This is URGENT.
public class KeyBoarder
     private int keyPressed;
     public KeyBoarder()
          System.out.println("Welcome to keyboard");
     private void print()
          System.out.println("Keyboarder has printed");
     public static void main(String args[])
          KeyBoarder board = new KeyBoarder();
          board.print();

How to make Mac Mini (Early 2009) sleep in Lion?

After upgrading to Lion, my Mac Mini (Early 2009) stopped going to sleep from the Apple menu or from the keyboard. The problem has persisted with all point releases of Lion. The computer went to sleep with the same peripherals just fine under Snow Leopard.
The display goes to sleep but the computer itself neither suspends nor hibernates. The power light is lit and doesn't pulsate. Measuring how many watts the device draws from the power socket shows that it's not sleeping. It wakes up so quickly that it must be only the display sleeping.
Console log shows nothing when trying to sleep.
Changing the hibernate mode from the default 3 to 25 makes no difference. Running the PleaseSleep app make no difference.
How to put Mac Mini (Early 2009) to sleep (preferably hibernation--not just suspension) under Lion?

Hello,
Open console in Applications>Utilities, check the system log for the date/time of the last problem & the Startup right after that for clues.
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

How to make MAC print to an network printer on a non default port.....

Similar Messages

Maybe you are looking for