How to make main menu start at loop point when you link back to it?

I have a main menu with a an intro, after the intro I have put a loop point.
But when I link back to the main menu, it plays the whole intro.
How do I let the main menu start at the loop point when I target a button back to it?

Jake:
English is not my native language (I used Wikipedia to understand RTFM !!!).
I used to copy&paste some lines from the manuals when a post can be answered directly that way (why to write it again if it's well written there?).
This is my "last upgrade": I uploaded some captured images from the manual to use easier in this kind of frequent questions. I like to show that the information was right there in the manual . . . but I really find the expression RTFM a little hard !
;D
  Alberto

Similar Messages

  • How to make Outlook stop asking for a password when you no longer have a valid password?

    Many people have asked how to get Outlook to stop prompting for a password, but the answers given are for people who have a valid password. My question is different. You've graduated from school or left your job. You no longer have access to an Exchange
    server. Within Outlook, you have an historical archive of your emails messages and you need to keep them. You can't send email because you no longer have access to that Exchange server, but you have a local cache of the address book in Outlook, which is valuable
    to you and you want to continue to be able to use.
    How do you keep the account in Outlook but have it stop prompting you for a password in this specific case? Remember, you never will have a valid password to this Exchange server again.

    Well you can manually recover your lost PST password with the command Pst19upg.exe -i filename.psx then press enter. After using this
    command your pst files will be free from password and you can easily again use your outlook files. You can also recover pst password with the assist of pst password recovery tool.
    http://www.outlookpassword.recoverytoolbox.com/
    It's Recovery Toolbox for Outlook
    Password.

  • How to make firefox to open new a tab when you click a link in pdf

    I have this pdf page that has a lot of links embedded opened on Firefox (24.7).
    When I click the link on the pdf page, it jumps to the page on the very same tab.
    Is there any way to open links on a pdf page in a new tab?
    What value in about:config should I modify to make it happen??

    Hi,
    You can't open link in new tab by middle click on PDF page...
    You must be talking about behavior on normal web page.
    Thanks for your response anyways.

  • How to make a song as Apple loop?

    Hi there,
    I'm working on 'dj mix' and liked to make couple of songs as apple loops.
    Dont want to use 'Time and Pitch Machine' as I want to change tempo and see how they mix together...let's say starting mix from 130 and ending up to 138bpm.
    I know how to make short files to Apple loops but as long as 6-8min tracks seem to have problem. Cannot select type "loop" in "Add Region to Apple Loops Library" for some reason?
    Using PowerPC G5 and logic Pro 7.2.2
    Is it possible use Logic Apple loops as Ableton 5 Live is using files?
    So much easier to use a tool you have been using last 6 years...
    Thanks for your help!

    i tried this also, but could not get it to work. i got an error message saying that the loop was too long to be an apple loop.
    if you get it to work, please post how!

  • How to make context menu in Windows 10 application?

    How to make context menu like this? With touch friendly and DPI per monitor awareness. Also considered WPF variant.

    Hybrid app? Do you mean Universal app?  Please explain what you're trying to make.
    Matt Small - Microsoft Escalation Engineer - Forum Moderator
    If my reply answers your question, please mark this post as answered.
    NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
    objects and unknown namespaces.

  • In JSF, how to make a menu with access control?

    In JSF, how to make a menu with access control?
    The access control can be guided by programming, database or other means if possible?
    Thanks

    I want to make a dvd menu in iMovie because i don't have IDVD and can't find anywhere to download it?
    For making DVDs I would recommend iMovie 06 and iDVD 09 both readily available on Amazon or eBay.  Shop for iLife 06 and iLife 09.
    You can make menus and chapters with any version of iMovie except the latest one. There's nothing wrong with iMovie 11 either but I prefer iMovie 06.
    By using iMovie 06 and iDVD 09 I make DVDs with professional moving menus with very little effort. They look almost as good as Hollywood.

  • How do I make the menu title a different color when it is the active menu in Spry horizontal menu?

    How do I make the menu title a different color when it is the active menu in Spry horizontal menu?
    Dreamweaver CS5.5
    Apple OS X.6.8
    View site at: http://dorsay-easton-indian-law.com/staging/index.html
    Steps:
    1. Click link to land on Home page
    2. View Home link in Spry horizontal navigation menu
    Actual:
    Home menu title is the same color as all of the others.
    Expected:
    The title of the active menu is       color: #FFC.
    I was hoping that a:active would give me this functionality, but that's not how it is described. Any suggestions are welcome!

    Nothing I have tried in the template makes the BODY tag editable. That's why I'm wondering how to disconnect the template from the individual pages. Adding an ID to each body tag is a prerequisite of the how-to page you supplied.
    You don't make the <body> tag editable in a Template.
    You make attributes of the <body> tag editable.
    Don't disconnect the Template from the child pages.
    Specify editable tag attributes in a template
    http://help.adobe.com/en_US/dreamweaver/cs/using/WScbb6b82af5544594822510a94ae8d65-7aa3a.h tml
    In the Template:
    Select the <body> tag (either in the Tag selector or click inside the <body> tag in Code View)
    Modify > Templates > Make Attribute Editable
    Select ID from the Attribute dropdown menu
    If there's no existing ID attribute then click Add and type ID into the next dialogue box
    Attribute: ID
    Check the box to "Make attribute editable"
    Enter anything into the Label field as a default e.g. foo
    OK
    Dreamweaver will change the <body> tag to read <body id="@@(foo)@@"....
    Now the ID is editable
    Save the Template and update the child page
    In each child page:
    Modify > Template Properties
    Select the id attribute from the list (it's probably the only one listed)
    Change its name in the box to whatever name matches your CSS rule for the active state for that page
    OK
    Save
    Upload

  • How to make an auto play, auto loop DVD

    I can't find any option or help file on how to make a DVD's contents loop. I don't need any menus just the movie to play and loop. Can anyone help me out here? Cheers

    You are most welcome, but Jeff did the "heavy lifting," like Ann Bens did in the PrPro forum.
    The important thing is that you get what you need.
    I'd ditch the Memorex discs, and settle on Verbatim, or Taiyo Yudens. I once used Memorex tape (probably back in your dad's, or grand-dad's day), and it was good. However, for blank DVD media, they adopted a poor business plan - buy the very cheapest source media, and emboss it with their logo. In a spindle of 100, you might find 3 - 4 different mfgr's media. TDK was once good, but went with the Memorex business plan.
    There are several media info utilities, and even the free ImgBurn can tell you, but it is always interesting to put in a Memorex disc, and see who actually made it, plus the lot number. Some discs might be good, but then some others can be horrible.
    Good luck,
    Hunt

  • GPRM-based button with Start at Loop Point Troubles

    First of all, I'm running DVD Studio Pro 4.2.1 on OS X 10.4.11
    I'm trying to finish a project where when a video ends, it jumps back to the menu directly to the next button in order. This menu also has a loop point set in order to skip an opening animation. So I wrote the following script to accomplish this:
    1: mov GPRM 0, SPRM 8
    2: div GPRM0, 1024
    3: add GPRM0, 1
    4: jump "menu name"(Loop) [GPRM 0]
    When I simulate the disc, everything works fine. However, a burned disc fails to return to the loop point. It will start on the next button when the highlights appear at the loop point, but the menu will begin from the beginning animation, not at the loop point.
    Is there some conflict between the GPRM based button command and the start at loop point command? I did perform a test with the GPRM based button commands left out and the start at loop point function worked perfectly.
    Edit: The "GPRM 0" at the end of the script shouldn't be a link but in brackets instead... the forum changed it to a link by default.
    Message was edited by: brazzamHD

    Given lines 1, 2 and 3, it is very unlikely that GPRM0 will ever be zero...
    What your lines are saying, roughly, is:
    "find the value of the last button that was pressed on a menu, and reduce it to a simple integer we can work with. Add '1' to the button number and then jump to the loop point on the menu IF the value in GPRM0 is '1'"
    The problem is that it will never be '1' because of line 3. The lowest value it could be is '2' when you keep that line in there.
    Also, you don't specify which GPRM you are evaluating in either version of line 4 - I assume GPRM0, as that is the one you are working with in lines 1, 2 and 3.
    If you want to return to the loop point of a menu depending on the button the user previously selected being the first button then the code is this:
    mov GPRM0, SPRM8
    div GPRM0, 1024
    Jump MenuName (Loop) If (GPRM0 = 1)
    However, you might want to simply start at the loop point of the menu but make sure that the user is on the same button they were on previoulsy, in which case the code would be:
    mov GPRM0, SPRM8
    div GPRM0, 1024
    Jump MenuName (Loop) \[GPRM0\]
    To do this you \must make sure that you have checked the GPRM based button checkbox in the property inspector.
    If you want to go to the next logical button after the one the user was on previoulsy, then you would need to add a '1' to it. The code looks like this:
    mov GPRM0, SPRM8
    div GPRM0, 1024
    add GPRM0, 1
    Jump MenuName (Loop) \[GPRM0\]
    Note that the bracket shapes are important... a GPRM based button jump means that you will go to a button which has a value the same as that in the specified GPRM. The square brackets signify it is this kind of move, and not a simple evaluation of true or false.

  • GPRM based button ignores Start at loop point!

    I have made the well known gprm based button script that jumps to last pressed button of a menu, and it works fine, but if I also enable the 'Start at loop point' function it only works in the simulator but never on test discs or final DLT's.
    Is it a software bug that DVDSP 4.03 ignores the start at loop point if it also should jump to a gprm based button?

    Nice... I've just done this and got exactly the same as you.
    It would appear to be that the loop point argument is stored in the same way a prescript is stored - and hence the GPRM based button jump doesn't work.
    I'll look further into this to see if I am on the right lines, but you'll need to create a second menu which is identical to the looping portion of the first, then point to that instead of the first menu. A GPRM based button jump should then work:
    mov GPRM0, SPRM8
    div GPRM0, 1024
    Jump menu2 [GPRM0]
    This will have the same visual effect as you want, at the cost of having a second menu on your disc.

  • How to make google come up and not yahoo when i click anew tab

    how to make google come up and not yahoo when i click a new tab
    == This happened ==
    Every time Firefox opened
    == today

    You can use 1 of these add-ons
    [https://addons.mozilla.org/en-us/firefox/addon/newtaburl/?src=search
    NewTabURL ]
    [https://addons.mozilla.org/en-us/firefox/addon/new-tab-homepage/?src=search New Tab Homepage]
    with NewTabUrl you have more options
    thank you
    Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

  • How do I change the sound that is played when you iI use the Find my IPhone feature to make it alot louder?  The current sound is very faint, difficult to find as I am hard of hearing.

    How do I change the sound that is played when you I use the Find my IPhone feature to make it alot louder?  The current sound is very faint, difficult to find as I am hard of hearing.

    Hi,
    Tap the iPod icon in the Dock. Then tap the Airplay icon just to the right of the volume slider.
    Make sure the iPad speakers are selected, not your wireless.
    Carolyn 

  • How can I get a small window to open when a link is clicked (AS2)

    Hi i,m developing a HTML site and used one animated flash button(AS2) I want a small sized window to open when a user clicks on a button.
    The window will contain information that i want to display.It dosnt require a normal 800x600 window to open. I just want a 1/4 size of 800x600 etc. Is this possible and if so how.
    I havnt done this before
    Thanks
    Manoj

    HELLO NED,
    I WAS RECEIVING MANY MAILS FROM YOU, BUT I DON'T UNDERSTAND WHY DOESN'T RELATED WITH MY PETITION, I SEND
    TO YOU AGAIN MY QUESTION, AND IF YOU CAN HELP ME I APPRECIATED VERY MUCH LET ME KNOW.
    THIS IS MY QUESTION....."ABOUT DATAGRID AS3
    Hello Ned, I appreciate very much your soon answer, I believe you have understand me, but how can I do that? could you give some help? This is part of the code and this is the function that I use
    var url: String = "xmls/rests.xml";
    var req:URLRequest = new URLRequest(url);
    var myLoader:URLLoader = new URLLoader();
    myLoader.addEventListener(Event.COMPLETE, completeHandler);
    myLoader.load(req);
    function completHandler(event:Event):void {
           var myLoader:URLLoader = event.currentTarget as URLLoader;
           var xmlDP:XML = new XML (myLoader.data);
           XML.ignoreWhitespace = true;
           dp = new DataProvider(xmlDP);
           dp = sortOn("name", Array.CASEINSENSITIVE);
           dDg.dataProvider = dp;
           aDg.addEventListener(Event.CHANGE, changeHandler);
           function changeHandler(event:Event): void {
                var thisItem:Object = eve.target.selectedItem;
                descripTa.text = thisItem.description;
                aUI.source = (thisItem.image);
                preloader_mc.visible = true;
    My intention is that when a button from a main (swf) loads the swf it displayed the first selected item with a image (UILoader) and the description (TextArea)
    Thanks in advance Ned
    Joselyn             .................."
    THANKS AGAIN NED
    REGARDS
    JOSELYN
    Date: Thu, 13 Oct 2011 07:49:02 -0600
    From: [email protected]
    To: [email protected]
    Subject: How can I get a small window to open when a link is clicked (AS2)
    Re: How can I get a small window to open when a link is clicked (AS2) created by Ned Murphy in Flash Pro - General - View the full discussion
    Look at the Methods section and choose whichever suits your needs, the first one listed does not.
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3969302#3969302
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3969302#3969302. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Flash Pro - General by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • How to change your desktop password on a mac when you forget your old password

    how to change your desktop password on a mac when you forget your old password

    Forgot Your Account Password
    For Lion, Mountain Lion, or Mavericks
        Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         When the menubar appears select Terminal from the Utilities menu.
         Enter resetpassword at the prompt and press RETURN. Follow
         instructions in the dialog window that will appear.
         Or see Reset a Mac OS X 10.7 Lion Password, OS X Mountain Lion- Reset a login password,
         and OS X Lion- Apple ID can be used to reset your user account password.
    For Snow Leopard and earlier with installer DVD
         Mac OS X 10.6- If you forget your administrator password
    For Snow Leopard and earlier without installer DVD
        How to reset your Mac OS X password without an installer disc | MacYourself

  • HT1551 Does Apple TV shut down when you switch back to regular TV?  Or do you have to sign out and how do you do that?

    Does Apple TV actually shut off when you switch back to regular TV?  Or do you have to sign out?  How do you sign out?  Or is there another way to shut it off?  Thanks!

    No, you need to go into the settings and select sleep now.
    You can also press/hold the select (centre) button on the remote for 5 seconds.

Maybe you are looking for