How to make make Siebel 7.5.3 work on Firefo 3.6.12 ?

Hi All,
I have a Siebel 7.5.3 application but it's not working properly on Firefox 3.6.12 (Mainly the username and password are not accessible on Firefox, this problem is not appearing on IE), one suggested solution was to define a new browser in the web administration page and then enter the capabilities of the browser but this didn't turn to be a successful one.
Please can any one suggests a better and effective solution ?
Thanks in advance.

Hi,
Only IE is supported for HI Siebel. Even if you could somehow get it to work why would you go down the path of not being supported by the vendor.
R
Robert Ponder
Lead Architect and Director
Ponder Pro Serve
cell: 770.490.2767
fax: 770.412.8259
email: [email protected]
web: www.ponderproserve.com

Similar Messages

How to make site root-relative links work in DW and Server both?

See details on buggy DW image link behavior, below. My question is:
1) how to make site root-relative links work in DW and Server both? Or…
2) how to reliably automate the change of several hundred legacy root-relative links of the form
/images/image.jpg to document-relative?
That is, to
../images/image.jpg or
../../images/image.jpg or
../../../images/image.jpg etc…depending on where the directory is.
The old format (/images/image.jpg ) used to work fine in my previous DW 8 configuration but appear grey in DW after “upgrading” to DW cs5.5 mac. (they look fine on the server, but it’s hard to edit image-heavy pages locally when they are all grey).
I tried changing the files to how DW creates root relative links now:
/public_html/images/image.jpg, which is a very easy, attractive root flow since there’s a one-to-one mapping. These look great in DW but are broken on the server!
I looked at the “advanced” site setup, and it looked like it might be possible to nuke the /public_html/ part of my server info…but it also looked like there was the potential for doing damage changing these settings, which are automatically generated from our server connection settings, which seem to work.
The “links relative to document/ site root” toggle…does that change how DW interprets existing links, or just change the default when you are adding a link? I have made 80% of the file links document relative…before wondering if root-relative isn’t better?
It sure seems less ambiguous for all those images if theres a way to make root relative work for DW design view, DW link check, and server.
Summary of buggy behavior: (see test with images here)
"old style" site root link
      /images/img_book/WScover120x150_NEW.jpg
      Design veiw in DW: broken (grey w/ broken icon)
      Link check in DW: "external link" (i.e., uncheckable, + file could appear orphaned)
      Browser: good
      Ease of switching: n/a (existing format)
"new style" site root relative link
      /public_html/images/img_book/WScover120x150_NEW.jpg
      Design veiw in DW: good
      Link check in DW: good
      Browser: broken
      Ease of switching: easy
Document relative link
      ../../images/img_book/WScover120x150_NEW.jpg
      Design veiw in DW: good
      Link check in DW: good
      Browser: good
      Ease of switching: hard (how to automate?)
Absolute link
      http://www.oasisdesign.net/images/img_book/WScover120x150_NEW.jpg
      Design veiw in DW: broken (grey w/ broken icon)
      Link check in DW: external (i.e., uncheckable, + file could appear orphaned)
      Browser: good
      Ease of switching: n/a...not a real option
Thanks!
Similar discussion on "/"

Hello again Jon!
Thanks for jumping on this.
All clear and understood about where publc_html is etc.
No contemplation of nuking the actual public_html directory on the server, just the "/public_html" text string at the start of the DW-generated links.
"/public_html" is automatically added to the front of the link in DW if I create the link with any of the GUI tools, if I have "site root relative" selected. And ""/public_html" ends up in the code, and gets uploaded that way to the server, where it (obviously) doesn't work.
Doesn't sound like it is supposed to work this way. Also, what seems to be the usual root relative format (/images/image.jpg) shows as a broken link in the GUI and an external link in the DW link check. All this togther makes me thinkI have some obscure setting incorrect?
The setting that caught my eye is manage sites/ site setup/ advance settings/ local info/ web url, which is automatically set to http://www.oasisdesign.net/public_html/
it gives an option to change it but it makes every effort to make this NOT look like something users should mess with:
Having gone through the more careful thought process during this post, I'm ready to do the experiment of changing the remote server web URL (why is it wrong by default?)...think I'll eat dinner first so there's 45 min to avert disaster if anyone knows this to be a bad idea!
Art
PS--don't have a local testing server...don't think this will solve the GUI broken link/ link shows as external problems.
Is there an easy, automated way to change links sitewide from document to root relative?

Has anyone figured out how to make the Yamaha 01V96i mixer work with Logic 9.1.8

Has anyone figured out how to make the Yamaha 01V96i mixer work with Logic 9.1.8 as a control surface ?

In YAMAHA01v96i:
Go to DIO/SETUP select Generic DAW. Go to MIDI settings page and set the desired port (personally I use Number 1), Select the same audio frequency you use in your DAW (I use 44.1KhZ)...at this point You should save a scene in you 01V96i to avoid to repeat all the procedure again.
Open studio manager, go to patch and set the input port from 17 to 32 respectively to USB1-USB16 (this will give you the return from you DAW to the 01v96i
Save again the scene overwriting the old one.
in LOGIC
Click on preferences, select Audio then select 01v96i, then click on control surface and select Mackie design Baby HUI and in the midi session set the same port that you've been setting on the Yamaha 01V96i (Port 1 if you follow this example).
That's more or less it.
It worked for me...so far

How to make the same code that works only?

how to make the same code that works only?
code:
Form2.Close = Me.Enabled = true
effect such as this code

I have this code:
Public Class Form1
Private Sub Button4_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button4.Click
Form2.Show()
Me.Enabled = False
End Sub
Private Sub Button5_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button5.Click
Form3.Show()
Me.Enabled = False
End Sub
End Class
he wants to after closing Form2 and Form3 unblocked the whole form1
it means that:
when I click the button, displays the himself form2 and blocks himself form1" and after closing Form2 , unlocks himself Form1"
the same with Form3

How to make an 'order' button that works?

How do I make an 'order' button, by clicking on it, will post a pre-defined product number in a contactform?
Probably I have to use php, but I do not know how to make the correct script.
Regards, Gerald

If you just need it to pop text into a textfield, you can use javascript, something like this might do the trick for you...
<textarea id="TheText"></textarea>
<select id="DropDown">
    <option value="">None</option>
    <option value="text-one">Choice One</option>
    <option value="text-two">Choice Two</option>
    <option value="text-three">Choice Three</option>
    <option value="text-four">Choice Four</option>
</select>
<script type="text/javascript">
    var thetextbox = document.getElementById('TheText');
    var mydropdown = document.getElementById('DropDown');
    mydropdown.onchange = function(){
    thetextbox.value = this.value;
</script>
The script should come after the textbox and dropdown in your HTML.

How to make custom icc color profile work as default for all users?

Hi!
I've calibrated two monitors for the machine running Mavericks OS X. I've managed to move these custom icc color profiles to ColorSync folder in HDD Library, so that that they are available for all the users. However, I cannot figure out how to make these icc profiles work as default profiles for all users and not only the one I used to calibrate monitors.
Is there a specific place I have to put custom icc profile to make it system default?
Thank you!

If you put the profiles in the root /Library/ColorSync/Profiles/ folder, then each user needs to select them in their account. There isn't a way to apply them globally so each account automatically comes up that way.

How to make the print, email button work in PDF output

Hello,
I'm using LC Designer ES2 to create a xdp form with print, email and httpSubmit button. Then using LC server to generatePDF output, binding with xml dynamically. But after that I got the static pdf file and none of the button work,
I really need help on how to make it work. Any configuration, plug-in....
Thanks,

Hi,
This is solved by note 1281208.
Thanks,
Edited by: Zhijie Kong on May 24, 2011 6:06 PM

How to make a mini mac server work on multiple workstations

I would like to purchase the mini mac server for my 3 boys and set up 3 different workstations (monitor, keyboard, mouse) for each kids.
Can you do this? If so how???

What you are describing is how mini-computers were setup forty or so years ago, and what users were gleefully glad to get rid of when true micro-computers came on the market in the 1970s. In those days the processor and RAM memory were, by far, the most expensive parts of the system costing literally thousands of times more than the keyboards and monitors.
Today the cost of the processor/RAM/Storage have fallen to the point the monitor may be the biggest contributor to total system cost. For example a typical $800 Mac mini coupled to a $1,000 27" Thunderbolt display. The class of system you describe is still around and in use, but generally at a total system cost in the $100,000 range. To make what you are describing work you would need, at a minimum...
A wired or wireless network
One dedicated Mac mini server with installed server application (no mouse, keyboard, or monitor needed)
Three work stations each consisting of an iMac or a Powerbook, or...
one Mac mini
one keyboards
one mouse or trackpad
one monitor
arguably substantial understanding and/or knowledge of the Server application
A recommended alternative would be just the network and three work stations, each operating as a stand alone work station. There isn't room here and I don't have the time to go into all the various combinations and the pros and cons of each, but the recommended alternative would end up costing roughly $1,000 less simply be eliminating the server. It would also be a bit more straightforward to administer.

How to make a photo CD to work in a DVD-player?

I burn photo CDs in Finder in my MacBook. No problem with the burning, but the CD doesn't work in my DVD-player. I can see some of the photos, but some are just grey "items". A photografer told me to use a setting in the burning program that burns the CD in PC format. That would make my photo CD to work in PCs and DVD players. The problem is that I can't find any settings like that when I burn CDs in finer. Are there any? Shall I use some other program to burn?

It’s not a good solution. (I’m no expert at IPhoto.) The manual in iPhoto says that you have to export the photos to a burning map in Finder if want the photo CD to work in Windows and PCs. Then the problem is back. I can see the photos, but there is grey “item” for every photo.
The other way is to burn direct from iPhoto. OK, no grey items. But the photos are “down sized” in quality and not full size if you want to look at them on your TV via your DVD player.

How to make Oracle BI Mombile to work when SSO is implemented in BI?

Hi folks:
I have SSO enabled in my OBIEE 11.1.1.6.6 . Its is working fine from IE/Firefox Browser/Chrome.
Before implementing SSO ipad app was running perfectly fine.. but now Its not getting connected...prompt for username and password all the time.
I am aware of SSO limitation of Ipad. Hence I tried connecting with SSO switch OFF in Ipad....in none of the ways actually is working :-(
For SSO ...I'm using AD Authentication with Kerberos.
So is there any configuration I am missing somewhere to allow Oracle Mobile to work when SSO is configured for BI?
Below is what I am using to connect:
Host: xxx.yyy.com (also tried with IP address)
Port: 9704
SSL – Off
SSO – Off (also tried setting to ON)
Username: my username
Pass: my password
Save Pw: On
Device Locale: On
Analytics Path: /analytics/saw.dll
Publisher Path: /xmlpserver
Any feedback will be really appreciated ...I'm really stuck on this ... or if you faced this and had to implement a workaround ... please let me know.
Thanks a lot!
Matias

Hi: I tried that and got the following error message.
"Error 401--Unauthorized
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.2 401 Unauthorized
Te request requires user authentication. Te response MUST include a WWW-Autenticate header field (section 14.46) containing a challenge applicable to the requested resource. The client MAY repeat the request with a suitable Authorization header field (section 14.8). If the request already included Authorization credentials, then the 401 response indicates that authorization has been refused for those credentials. If the 401 response contains the same challenge as the prior response, and the user agent has already attempted authentication at least once, then the user SHOULD be presented the entity that was given in the response, since that entity MAY include relevant diagnostic information. HTTP access authentication is explained in section 11."
Again this was after SSO configuration. I have no way to bypass SSO based on the current configuration ... so not sure how to solve that in order to make it work from iPAD and also from the IOS application.
Any thoughts?
Thanks!
Matias

How to make Double Click To Edit work instead of ClickToEdit for Af:Table

Hi All,
We use AF:Table in clickToEdit mode and most of the time the users use this table for selecting a master record then work on the detail records. To avoid the cost of rendering the selected row as editable we would like to change the behavior to Double Click To edit. This way the user can intentionally put the selected row in edit mode when needed. What would be the best approach to achieve this ?
We use 11.1.1.6 and ADF BC.
Thanks

Not sure if you can get it to work in 11.1.1.6.0 as you don't have the ActiveRowKey property which can be used to make a table row editable. The property comes with 11gr2.
What you can try is to set the tabel to clicktoedit, add a clientListener which you use to listen to the click event and then cancel the event. Add another clientListener whihc handles the doubleClick event, make the clicked row the current row (see http://www.oracle.com/technetwork/developer-tools/adf/learnmore/56-handle-doubleclick-in-table-170924.pdf) and, well now comes the problem, make the current row editable. I don't know how to do this without the ActiveRowKey property.
One other possible solution is a trick described here http://dstas.blogspot.com/2010/08/press-edit-button-to-make-table-row.html
here a transient attribute is used to manipulate the isEditable() status of an attribute of the VO. This should do the trick, but is much more work.
May be someone else knows a better solution.
Timo

How to make a reset password function work in OIM?

There is a requirement for resetting password for users in OIM.
An OIM admin should be able to reset a password for a specific user, and the new password which should NOT be known by the admin will be sent to the user via email. And the user will be required to change his password when he logins with the new password.
I know there is a 'Change Password' button in User Detail page. But the problem is the admin has to type a password for the user, which means the new password is exposed. Ideally, the new password is generated by system. Has anyone had any experience in dealing with this kind of case? Thanks!

See if this can solve or answer your requirements.
When User's account is locked, It is assumed that he has forgotten his password.
Write a scheduled task which looks for all the locked users.
Generate temporary password for them.
Send that password in a mail to those users.
This may not be exactly how you want it to be. But this will require lesses efforts as compared to customizing "Change Password" button on admin console.
To make it the way you want, Following approach can be useful.
Admin console of OIM is made using struts framework. So If you know struts, Reading into struts-config.xml file will tell you the action class which is executed on click of "Change Password".
Modify that action class and make it the way you want that to be.
-Kiran Thakkar

How to make this PS Mock-up work in HTML/CSS

Here's a picture of my basic web page graphic:
Can someone help me work out how to break it up to use as a background for a site please? The main thing that's bothering me is the border around the pale panel. I can take a slice of a third of the guitar and put that as a background in the body with a dark blue background color. Then I was going to take the pale panel only and use that as the background image for the content <div> and add a pale background. The problem is the transparent border which the only way I can think of to keep it is to make the image go on forever. The other alternative, is to lose the border.
Thanks for looking
Martin

Hello Brad
Thanks for chipping in.
It's not so much cutting up the image that's the problem it's more what I do with it when I have the pieces.
I've broken it into two. The dark background set as a background image and centered in page and then the pale panel in a content <div> with a top margin and the image set as a background and again, centered.
The thing that's not possible in that simple structure is to make the gray border that gives a sense of transparency continue down the page as the content grows.
Thanks
Martin

How to make the Access Gate SDK work with Web Gate

When we want control the display of one area in one page, we can define this area as one resource then control the access of it. But when the user has been authenticated in the application, how can we get the user session and then call Access Gate SDK to check if the user is authorized? The following is one utility class to archive it.
* $Id: CreateUserAction.java,v 1.1 2005/10/11 23:19:34 jason Exp $
* $Revision: 1.1 $
* $Date: 2005/10/11 23:19:34 $
* Copyright (C) 1972 - 2005, Oracle Co. All Rights Reserved
* The program(s) herein may be used and/or copied only with
* the written permission of Oracle Co. or in accordance with
* the terms and conditions stipulated in the agreement/contract
* under which the program(s) have been supplied.
package oblix.view;
import com.oblix.access.ObAccessException;
import com.oblix.access.ObConfig;
import com.oblix.access.ObResourceRequest;
import com.oblix.access.ObUserSession;
import javax.servlet.http.Cookie;
import javax.servlet.http.HttpServletRequest;
* @author zhoujian
public class OblixUtil {
private static String ObSSOCookie = "ObSSOCookie";
private OblixUtil() {
* Check if the user is Authorized
* @param request
* @param rescourceUrl
* @return
public static boolean isAuthorized(HttpServletRequest request,
String rescourceUrl) {
return isAuthorized(request, "http", rescourceUrl, "GET");
* Check if the user is Authorized
* @param request
* @param resourceType
* @param rescourceUrl
* @param resourceMethod
* @return
private static boolean isAuthorized(HttpServletRequest request,
String resourceType, String rescourceUrl, String resourceMethod) {
try {
ObConfig.initialize();
ObResourceRequest resource = new ObResourceRequest(resourceType,
rescourceUrl, resourceMethod);
ObUserSession session = getObUserSession(request);
return session.isAuthorized(resource);
} catch (ObAccessException oe) {
oe.printStackTrace();
ObConfig.shutdown();
return false;
* Get the Oblix user session from the request.
* @param request
* @return
* @throws ObAccessException
private static ObUserSession getObUserSession(HttpServletRequest request)
throws ObAccessException {
String token = getCookieValueByName(request.getCookies(), ObSSOCookie);
if (token != null) {
return new ObUserSession(token);
return null;
private static String getCookieValueByName(Cookie[] cookies, String name) {
for (int i = 0; i < cookies.length; i++) {
if (cookies[i].getName().equalsIgnoreCase(name)) {
return cookies[i].getValue();
return null;
}

Couple of options. You seem have to taken the Access Gate based approach. I will throw this in any way and you can make a call which one you want to use.
If its a web application you can control authorization based on Resource by defining policy in the Access Manager.
You mentioned aout display of one area in one page. That should be driven off of User attribute or custom logic. If it is driven off of User attribute then you can return header variable and you can check in the code as opposed to writing custom access gate.
Now if you do want to write custom access gate when the resource is already protected by a Web gate,
you can get the ObSSOCookie from the users browser session.
You can pass the URL to the IsAuthorized method and call.
Now here you have to install the Access Server SDK on the server, create custom access gate and then write the code and deploy it on that server.
THanks
Ram

How to Make the Win7 Enterprise ISO work with Boot Camp?

Hey...
So I've acquired a new MBA. I didn't really want to considering all the issues out there (of which so far the volume fluctuation issues applies to me as well), but on Friday I need to bring some kind of laptop with me on a trip to record a song for a wedding next month. And for that, to make it worse, I need Winblows.
So I got the Windows 7 Enterprise evaluation ISO. I let Boot Camp modify it and write it to a USB stick.
But when I boot into the thing, I never get to actually install Windows, because I get "Install Windows": "Windows Setup encountered an internal error while loading or searching for an unattend answer file."
What to do??!?!!

Hmmm... That's strange!
Seems there are some differences between DVDs for Windows 7 that the Apple tool doesn't know how to handle?
The image I used to install with was the "7600.16385.090713-1255_x64fre_client_en-us_OEM_Ultimate-GRMCULXFREO_EN_DVD.iso " one — I believe I downloaded this from Microsoft at some point when they had it up for developer trials or something?
The MD5 sum of that image is dad9f7a0b4d5d928a6a67ba6cd896350. You can check yours in Terminal by writing "md5 <path to your image file>".
Perhaps if yours is different, you can find that other image online somewhere.
HTH

How to make make Siebel 7.5.3 work on Firefo 3.6.12 ?

Similar Messages

Maybe you are looking for