How to make 'manu date' in CORK filled automatically?
Hi Experts,
When using CORK, after hitting 'Goods movements', a window will pop up requeiring to enter expiration date/manu.date of the material.
My customer has a rule to convert the batch number into a date, they want the concerted date to be filled in to manu.date when the window pop up.
Or after they enter a manu.date in the pop up window, after hitting the 'OK' button in the pop up, a valiadation work is carried on.
I had tried many user exit in the system but none of them could be used for the requirement.
Could anyone please help on which user exit could I use? or how could I fullfill the user's requirement?
Please help me on this.
THank you very much.
Ying
Hi Experts,
Please help on this.
Thanks for your time.
Ying
Similar Messages
-
How to make a data base connexion in java?
I have an oracle 7 data base that i want to connect how to make a data base connexion in java?
J
D
B
C
Search these forums or follow the JDBC tutorial -
How to make the date to be entered as dd-mon-rrrr using form personalizati
Hi friends,
how to make the date entered to be dd-mon-rrrr format.....
the date should be entered only in this format...or esle it should not accept the date
how to do this with form personalization.....
thanks1) Instead of personalization, set ICX: Date format mask profile appropriately using sysadmin responsibility at the appropriate level.
2) If you have to use this new format just for one form, then use personalization to set the profile option in the when-new-form-instance. But unsetting it will be a problem.
I recommend option 1 above.
Hope this answers your question,
Sandeep Gandhi -
How to make CRM data sources for delta capability?
Hi All,
I know that the CRM data sources 0CRM_SALES_ACT_1, 0CRM_QUOTATION_I, 0CRM_SALES_ORDER_I have delta capability.
At present we are doing full loads daily but it has got some performance issues.So we are thinking to make these as delta loads.
Already some one has made a trail to make delta loads but not successful for some unknown reasons.
Could you please suggest me the steps to make these data sources delta capable both in CRM and BW systems?
As this is urgent...Please suggest ASAP.Hi
Go thorugh Below the note: 692195
Summary
Symptom
There may be problems or issues related to data tranfer from CRM to BW.
Other terms
CRM-BW extraction,upload,initial,delta,full upload ,Sales Analytics,
Reason and Prerequisites
There could be errors in customization or program errors due to which
data may not be transferred or incorrectly transferred to BW.
Solutions
Question 1 : The Extraction from CRM to BW takes a very long time. What can be done? (Performance Issues)
Suggestion 1: Please implement notes 653645 (Collective note) and
639072(Parallel Processing).
The performance could be slow because of the wrong control parameters
used for packaging.
You can change the package size for the data extraction.
Also note that changing the package size in the transaction SBIW
would imply a change for all the extractors. Instead, you could
follow the path in the bw system.
Infopackage (scheduler) > Menu 'Scheduler' > 'DataS. default data
transfer' > maintain the value as 1500 or 1000(This value is variable)
The package size depends on the Resources available at the customer side
(The no of parallel processes that could be assigned =
1.5 times the no of CPU's available approx.)
Question 2 : On executing transaction RSA3 I get records but I find 0
records when I load data from BW request.(No Data Available)
Suggestion 2: First check if there are any entries in the table
CRMD_ORDER_INDEX.Only if there are entries in this table you can
extract records.
If this is not the case then,
It is possible that the user does not have sufficient
authorities for extraction of the relevant objects.
Additionally, please review and implement the following notes
615670
161570
150315
618953
If you are in the release 4.0 then
To do BW extraction with the user please see that the following
authorization object exists(display mode is enough):
CRM_ACT,CRM_OPP, CRM_LEAD, CRM_SAO, CRM_SEO, CRM_CO_SE,CRM_CO_SC
CRM_CO_SA, CRM_CON_SE, CRM_CMP, CRM_ORD_OP,CRM_ORD_LP,CRM_ORD_PR
CRM_ORD_OE, CRM_CO_PU, CRM_CO_PD, CRM_ORD_PO
(all these objects are linked to transaction crmd_order).
Question 3 : The Deltas for my data source are not extracted . What can I do?
Suggestion 3: Please check the following.
Please Check if the services have been generated in transaction GNRWB.
If they are not active(not marked 'X' before their names) then activate
the services following the steps here.
Go to transaction GNRWB
Select BUS_TRANS_MSG
Select (on the right, the services) : BWA_DELTA3, BWA_FILL, BWA_queue
Press Generate.
Also check for the following:
1. The delta should have been initialized successfully.
2. Confirm that all Bdocs of type BUS_TRANS_MSG
are processed with success in SMW01.
3. If there are queues in SMQ1 with erroneous status then activate
these queues.
In Transaction SMQ1 if there are Queues existing with
names beginning with CRM_BWAn (n is number) then
activate these queues in the same transaction.
4.a)If required activate the datasource
Go to transaction BWA5 > select the required datasource and
activate.
4 b) The Delta may not be active ,activate the delta in BWA7 by
selecting the name of the datsource and pressing the candle icon for
'activate delta'.
5. In BW system
Go to transaction RSA1 > modeling > infosources > select the
infosource > right mouse click on the selected
infosource > choose option replicate datasource
Activate the infosource.
6. Go to the scheduler for the infosource > select delta in the
update >choose the option PSA only (in the Processing tab)
> start immediately
Check the entry in the RSA7 in the OLTP(CRM system)
Question 4: How can I extract the fields, which are not provided in the standard data source extraction .
Suggestion 4: Follow the steps mentioned below.
1. Enhance Extract Structure with the required fields. (Create & include
an append structure to the extract structure via transaction RSA6).
2.a) Release the fields of the append for usage. ( To do this, double
click on the Datasource and remove the flags in the column 'Hide
Field' for all fields of Append. )
2.b)If the new fields cannot be seen in the extract structure of
the transaction BWA1 then change and save the datasource, and then
activate it in RSA6.
3. Define your mappings in BADI (CRM_BWA_MFLOW) to fill these fields.
Goto SPRO .
Follow the path ->
SAP Implementation guide ->Implementation with other mySAP components ->
Data transfer to the Business Information Warehouse->
Settings for the application specific datasources (CRM)->
Settings for BW adapter->
Badi :BW adapter :Enhancement of datasources in messaging flow.
4. Replicate the new Datasource to BW.
5. Expand the Communication Structure in BW.
6. Maintain transfer Rules for the new Datasource.
7. Activate the trasfer rules and perform the upload.
Question 5: I am unable to extract user status correctly.What should I
do?
Suggestion 5 :Check the following notes
531875
616062
713458
700714
765281
Question 6 : What can I do when the activity/Opportunity/Complaint
reasons(Code,CodeGruppe,Katalogart) are not extracted.
Suggestion 6 :Check the following notes
481686
516820
603609
617411
711146
Question 7:Deleted opportunities are not reflected in BW.
Suggestion 7: Check the note 706327.
Question 8: How do you activate the metadata?
Suggestion 8:CRM BW adapter meta data has to be activated first before
it is available in the system. You can use Transaction BWA5 to copy the
meta data for selected DataSources. You can reach the transaction via
the IMG maintenance 'SAP Reference IMG -> Settings for SAP Business
Information Warehouse -> Activate BW Adapter Meta Data'. For more
information, see the documentation on the IMG activity 'Activate BW
Adapter Meta Data'. (Note 432485)
Question 9: I donot get any records for the delta upload of my attribute
datasource(s).What is to be done?
Suggestion 9: In case of attribute datasources, it is possible that the
entry for the GUID is missing in the table SMOXAFLD.
If , for example the datasource 0CRM_OPPT_ATTR is not giving deltas
then you can follow the steps:
1)If Delta process is active for the attribute datasource e.g.
0CRM_OPPT_ATTR, then stop the delta process in the BW
system
2) In the CRM system, Make the entry in the table SMOXAFLD
for the datasource with the Key
as 0CRM_OPPT_ATTR GUID 3) Save the entry.Activate the datasource 4) Check that the above entry is replicated in smoxafld_s also after this. 5) Create a transport request manually for the following object R3TR SMO4 0CRM_OPPT_ATTR
Question 10: What do the status BWSTONESYS0 , BWSTONEUSS0,BWSTTECSYS0 and various other BW status mean ?
Suggestion 10: The BW status are used to extract system and user defined
status.
The BW status are defined in the customization settings in SPRO.
Check for-> Status Concept for BP/Product/CRM objects
Here goto-> Process user status You will find the documentation attached here for the user status. Going inside the transaction you will find the status groups USS0, ZIOP,ZMOP etc. The names of the various BW status are derived from this For ex. BW + ST+ One + USS0 gives the name of the field BWSTONEUSS0 or BWST + ONE + ZMOP = BWSTONEZMOP (Master opportunity values) (which means BWST + (status group name) + status object group name) Double clicking on any of the object groups will take you to the values that these status can have . For ex. BWSTONEUSS0 in your system can have values E001 ,E002,E003,E007 which will be shown in RSA3 as BW status values 1,2,3,7, respectively.
Similarly we have Goto -> Process system status (in SPRO). Here you can get the values for the system status in exactly the same way as BWSTONESYS0(Lifecycle status) , BWSTTECSYS2 (Error) etc. In RSA3 you get the names as BW status, To know which corresponds to which status here,Gotothe record list in RSA3 . Here goto Settings - Layout -Current . Right click -> Press Show technical field names . You will be able to see the BW status names and will be able to adjust the layout accordingly.
Thank you,
DST -
How to make the date disappear on the blog summary page?
Hi,
I have read thru the message on this forum and can't seem to figure out how to hide or make the date disappear on the blog summary page. I can do it on the blog entry pages by turning the color opacity to 0.
I have included my page here:http://www.quantumhealthcentre.com/www.quantumhealthcentre.com/Services/Services .html
Also, if anyone knows how to delete the archive page or inactivate it on my website, please let me know.
Any advice would be appreciated.
Thanks,
Peggyhttp://www.wyodor.net/_Movies/HideDateBlogEntry.mov
http://www.wyodor.net/_Movies/HideDateBlogArchive.mov -
How to make the date format in ipod the same as in itunes?
When I look at my podcasts in itunes, the dates come up as dd/mm/yyyy (which is correct), however, when I look at my podcasts on the ipod, the date comes up as mm/dd, which is very confusing.
I cannot figure out how to make it so that the date format is the same.When I look at my podcasts in itunes, the dates come up as dd/mm/yyyy (which is correct), however, when I look at my podcasts on the ipod, the date comes up as mm/dd, which is very confusing.
I cannot figure out how to make it so that the date format is the same. -
How to make Start Date as optional parameter in Crystal reports 2011
Hi All,
I have existing Start Date and End Date parameter how to make them as optional parameters.
Thanks for your help in advance!!.Hi Mnnica,
There is an option 'Optional Prompt' under value options, make that as true. Do the same for both startdate and enddate then go in Record Selection Formula and write below formula :
If Not (hasvalue({?Startdate}) then True else {?Startdate} >= {databasedatefield}
and
If Not (hasvalue({?Enddate}) then True else {?Enddate} <= {databasedatefield}
Check below screen capture for Optional Prompt options :
-Sastry -
How to make test data anonymus
Hi all,
we are planning to copy our productive system to our test system. Therefore it is necessary to make all HR and customer data anonymus.
Is there a possibility within the standard (maybe a report) to make these data anonymus.
If there is no standard report, has anybody of you already written such a report and can tell me how is the best way to make data dynamically anonymus?
Thanks in advance for your help.
Best regards
TomHi,
Could you please elaborate it more?
rgds -
How to make Filemaker data indexed by SES?
We want to make lots of our data in Filemaker indexed by SES(Oracle Secure Enterprise Search). But it seems that oracle doesn't provide Filemaker option. How can I make the data indexed?
Message was edited by:
yoohanWe want to make lots of our data in Filemaker indexed
by SES(Oracle Secure Enterprise Search). But it seems
that oracle doesn't provide Filemaker option. How can
I make the data indexed?
Is it a difficult question? I think it isn't that difficult to write a adaptor to extract the text from filemaker data record.
Message was edited by:
yoohan -
How to make custom data validation on standard form.
Hi,
I have some little OAF experience. I have extended VO so far but I am still newbie.
I need to make custom data validation on standard form.
I Oracle Credit Management module on "Create Credit Application: Applicant" form I need
to validate chosen currency against customer setup (whether there is customer profile amount for the currency).
The page is /oracle/apps/ar/creditmgt/application/webui/ARCMCREDITAPPPAGE
There are controllers on the page:
oracle.apps.ar.creditmgt.application.webui.creditAppContentFooterCO 115.14.15104.2
oracle.apps.ar.creditmgt.application.webui.creditApplicationPageCO 115.6
oracle.apps.ar.creditmgt.application.webui.creditAppRegion2CO 115.13.15104.2
oracle.apps.ar.creditmgt.application.webui.creditApplicationCO 115.8.15104.3
oracle.apps.ar.creditmgt.application.webui.creditAppRegion1CO 115.28.15104.4
oracle.apps.ar.creditmgt.application.webui.creditAppBusBackCO 115.6
oracle.apps.ar.creditmgt.application.webui.OCMApplicantInfoRNCO 115.4
creditApplicationPageCO is pageLayout controller.
Please direct me how to achieve it.
Which controller should I extend (if any)?
How to get values from the page (customer site id, currency) and how to run custom sql in my CO class ?
Regards,
MarcinHi Marcin,
You have to find your GO button is handled in which standard controller, (if you click on the about this page, you should be able to identify the controller,
or you can download all the controller .class files and decompile and check the logic).
Then extend that controller(which has the Go button logic, you can see how it has been handled.),
The usual way to check is
if(pageContext.getParameter('<Go button name>') !=null)
Since you want to validate first your custom validation, in the extended controller ProcessFormRequest
dont call the super.processFormRequest unless your validation is success.
Call the super at the end.
Inside your extended controller you have to find your AM and then your required ViewObject to get the user entered values.
Thanks,
With regards,
Kali.
OSSi. -
How to make cube data avilable for reporting
Hello,
I have loaded data in to info cube from flat file, and created a query using BEx Analyzer. that query does not return results and gives an error msg "No Applicable Data Found".
Padmanabha Rao had a same problem. In his thread, expert is recommending to check whether the data is available for Reporting by Rt clicking Infocube -> Manage -> Requests tab. Ideally, you'll be able see an indicator(Query icon) if it's available for reporting.
My cube data is not available for reporting, how can I make it available for reporting?
Regards,
Tejas.Normally when the data gets loaded to cube, it will be available for reporting unlike DSO where you need to activate the data to make it available for reporting. There could be many reasons why the data is not available for reporting;
1. May be there is aggregrates created on the cube and the data never been rolled up to the aggregates. If you see a summation sign next to the cube then there is aggregates created on the cube and you need to fill the aggregates first before you can have the data available for reporting in the cube. To do that, manage ->rollup and start, that will fill the aggregates.
2. If there is any request in the cube which is still red, then any request after that won't be available for reporting until you either delete the red request.
If the problem still persist, then I would just delete all the data from the cube and reload the data again.
thanks.
Wond -
Does anyone know how to make custom date formats?
Hi,
In lightroom 4 I found a really useful tip where you can alter the file that controls how teh date format part of the import dialogue works - and more importantly it allows you to choose teh folder locations too, so when I import from another camera I can have the folder structure how I like.
The annoying thing is that I know its there and it will just be a case of copying the file I made to the right location.Typical, as soon as I post I find it!!
For anyone else looking for this its a file called: TranslatedStrings.txt
This should go in: C:\Program Files\Adobe\Adobe Photoshop Lightroom 5\Resources\en
You may need to make the en folder (and the file for that matter I forget)
The formatting I used was this:
"$$$/AgImportDialog/ShootArrangement_1/Template=Pictures\FromCamera\Cameras\5D Mark III\%Y_%m_%d"
"$$$/AgImportDialog/ShootArrangement_2/Template=Pictures\FromCamera\Cameras\DMC-LX7\%Y_%m_ %d"
"$$$/AgImportDialog/ShootArrangement_3/%Y_%m_%d"
Hope that helps someone -
How to make Birth date field (GBDAT) under IT0002 Personal data editable
Hello Consultants,
We had initially Birth date field (GBDAT) under IT0002 Personal data editable ...But after upgrade is made non editable...
We want to make it editable again..
Kindly suggest how we can proceed abt this....Hi Anju,
1. Go to PA30 >> Infotype 0002 >> On Date of Birth Field >> Enter F1 and find the Technical Parameter and idenfity which Screen is being Used... say for Eg: MP000200 / 2010
2. Go to Feature P0002 in PE03 and then identify the Return code for the Molga and Co. Code.
This Return feature is nothing but the Variable Key. Say for Example: 10
3. Now Go to SM30 >> T588M.....
3. Idenfity the Screen that you found in the step 1 and Variable Key you found in Step 2.
i.e. MP000200 / 2010 / 10
5. Double Click on that record and Find the Screen Field P0002-GBDAT... this has been set to Output Field... change it to Standard and it will work.
Hope this helps !!!
Kumarpal Jain. -
How to make a data variable BOLD
Hi,
I am passing a value to a data variable. Now this value being passed needs to be in BOLD format.How can i ensure this using Abap statements. ?
Note : This value, i am displaying in an ALV.But the problem here is not all the values have to BOLD,there is a condition attached to it.So i guess i cannot make use of ALV features.Am i correct ?
Please Guide me !!!
<REMOVED BY MODERATOR>
Regards,
Rohan
Edited by: Alvaro Tejada Galindo on Jan 23, 2008 12:27 PMHi,
You can not make a variable as BOLD, but you can display the variable in different color that can be possible in alv, i can suggest you to do this.
Rgds,
Bujji -
How can use a date picker to fill in dates in Numbers
I would like to know how can I have cells in date format which I would be able to fill with a date picker fro a calendar?
There is no date picker gui item in Numbers. Every idea I thought of in my head took longer then typing. If you describe your specific problem a little more people may be able to provide some other solutions
Maybe you are looking for
-
How to create a dll file for lab view?
Hello I want to create a DLL file for LabView. Can anyone help me in this issue? Regards Vivek
-
I have connected my Z61p laptop to an external monitor so that I can have more display area. Yesterday I closed down my computer and found and it was in sleep mode for a while. After I started working I find the connected monitor blank, the monitor s
-
Photoshop CS6 to a new computer?
Can I move photoshop CS6 to a new computer? How do I access the download?
-
I have downloaded Oracle 8i Lite V4 from the Oracle Website and just tried to install it on my PC running Windows NT V4 and it failed. I ran the setup program and the Oracle Lite Installer started up. After I entered in my Oracle Home, the Installer
-
Hi All, Can anyone help me out with the "list of Key Performance indicators(KPI)" related to Process Integration(PI) and its thresholds. Thanks in Adavnce, Preethi.